hi
what command should i use to convert nk.nbf into nk.nba using xda3nbftool.exe
thanks
use HTC64_Extended_ROM_Tool_v1.1 from bal666. It works and it is provided with a comfortable windows gui... :lol:
hi
i did use it and it converts into fat ...how can i use the fat file or convert it to nba
thanks
is there a tool that can convert the *.bin file of WM 5.0 ROM to *.nbf files ,thanks
Pls provide me with a simple answer to the following question:
I bought a XDA mini (O2) from Germany with german rom! I would like to change the rom to english.
Which files (rom) is the best suitable for my device? I have read through this forum, but i have to admit to have gotten quite lost due to the excess information provided!
Also: Should i do any other changes on my XDA? like bigstorage or so? I noticed, that in the ftp server there are different rom (i.e. big storgae, shippment, modified etc.) WHAT SHOULD I USE?????
Pls advice me on this one! Thanx for all your help.[/b]
All steps:
- get nbfdec from the thread 'upgrade to rom 1.13...'
- get maupgradeut_noid.exe from the ftp
Download the shipped rom from:
http://www.t-mobile.nl/zakelijk/htdocs/page/service/mda_compact_upgrade.asp
Download the Hexeditor from:
http://www.hhdsoftware.com/hexeditor.html
1. Unzip NL_11300_131_11200.exe (or any other shipped rom)
2. Put NBFDEC in the same directory as the unzipped shipped rom files
3. Copy the getdevicedata.exe to your Magician and execute to write DeviceData.txt
to \Windows and view with notepad
5. Decode nk.nbf -> nk.nb1:
nbfdec -d nk.nbf nk.nb1
6. Hexedit header to correct ID from DeviceData.txt
(probably only if using a rom from other provider)
7. Replace pattern for bigstorage in hexeditor:
locate the 02 00 00 80 00 20 and change 80 00 to b8 01 in the nk.nb1
(use binary search for this!!)
7. Encode nk.nb1->nk.nbf
nbfdec -e nk.nb1 nk.nbf
8. run maupgradeut_noid.exe to upgrade CE image
Also, this way you will save the contents of increased \Storage folder if previous rom was bigstorage one
Usage sample (must be run from the same folder as nbf files or specify full path):
nbfdec -d nk.nbf nk.nb1
nbfdec -e nk.nb1 nk.nbf
Regards, M
I've spent 5 hours just wanting to export the O2 dialer skin to my O2 XdaIIs with WM5. I found out that I need a SkinningPpc.dll file in windows directory but it doesn't let me copy it out.
So i figured out the rom dumping (first time doing it)
Unfortunately the dumped files put SkinningPpc.dll in a directory with a few S000 S001 S002 S004 files...
How Do I Combine these files to become a real dll file I can use to move to my XdaIIs?
Please Help! I am so frustrated now.. Thanks! :shock:
This might help:
http://www.buzzdev.net/index.php?option=com_remository&Itemid=68&func=fileinfo&id=83
I already used that tool to extract my rom and I got my dump.bin. I used the Wm5 Rom Edit tools to expand the dump.bin and got the problem above. Am I supposed to use something else to read the dump.bin so I can get the dll file I need? Thanks!!
anyone please... How do I combine the S000 S001 S002 S003 S004 files into the original dll file?
I don't know exactly how , but ....
Why don't you try to edit , with an hexa editor , a dll file and after , s000 s0001 ect ....
in example :
open in hexa editor msim.dll
open after S000 S0001 etc in msim.dll folder of dumped rom
and try to search how are the files ...
hi.
How can extract files from a mpx200 rom? I tried to use tools from the forum but with no success. Mpx200's rom is a file with .img extension. As i see so far in forum, rom's file extension for pda is .nbf. Is there any way to convert .img file into .nbf so i can use er2003edit program? Any other idea-guide that could help to extract the rom from my mpx200(wm 2003) would be very welcome. I couldn't find any resources on the web about extracting mpx200 rom and that's why i posted in this forum. I hope that i'm not totally off topic.
Thank you.
Nikos
I had a play with this a while back, to try to get MPX300 compatibility with VJCandela.
I believe the rom files have have a "B000FF header" (open it with a hex editor). Apparently splitrom can reassemble them into a rom we can play with, but it became more urgent to finish VJCandela then continue with this, so I put it aside. If you get anywhere on this, please PM or post so that I can see if I can make VJCandela cross compatible.
Many thanks!
V
I can upload a dumped mpx200 WM5 ROM to xda-developers FTP if needed.
These IMG files are somehow non-standard B000FF, I was unable to use splitrom to convert them to normal file.
You should dump ROM from a device, then remove a hole in the middle (probably MPx200 has 2 ROM chips at different addresses), then edit it manually because some idiot incorrectly edited that ROM to remove DevAuth.exe and broken its internal structure. After that you'll get a complete dump with broken ril.dll and gx.dll.
I wonder how that incorrectly patched ROM can even boot.
That would be interesting Mamaich. I'd appreciate it if you can.
Can we dump a live rom normally then? I'll try to speak to a guy with an MPX300 to get it dumped if possible, and try to upload it if he's successful.
V
hi.
I found so far that it's possible to convert the .img file, which is
used to update mpx200, into a .bin file. I opened the .bin file with a
hex editor and it starts with B000FF as you said. I don't know where i
can use this information or what it means. As you said it's the
header. When i try to dump rom with dumprom.exe i get an error message saying "unable to determine loading offset for out.bin". Looks like i have to find this offset myself and give it to dumprom. Could you help
me somehow on this?
Also where i can read a few things about the rom structure, xip and
stuff to understand what's going on.
Thanks!
EDIT1
Also tried with splitrom.pl.
With command splitrom.pl out.bin it gives me the following
B000FF entrypoint: 00000000
!!! your rom is not known to me: md5:
68847f4d859a242753798d9d0e205144
!!! your bootloader is not known to me: md5:
ea25e7468c09bf09a384a94cb4dcc67c
no operator rom found
no bitmap found
xip regions not found: 82d80000=LANG, 82040000=SMARTFON,
82d00000=OPERATOR, 82f2
0000=OE
And a lazy question. If i finally do it, i will get a folder in my
disk with all windows components unlocked and ready for modification?
EDIT2
Reading a few things about splitrom it says that it can handle bin
files with B000FF header. In our case(mpx200) we have a bin with
B000FF header. Right? So we can use splitrom to make the nk.nbf file.
An example on how to use splitrom.pl is the following.
perl splitrom.pl cfg/rom.nb1 \
-rm tmp/xda1.bin:0x81740000 \
-rm tmp/xda2.bin:0x81b00000 \
-rx tmp/xipchain \
-rb cfg/bootimage.bmp -ob 0x81ec0000 \
-rl cfg/bootloader.nb0 \
-wo nk.nbf -t nbf -n PW10A1-ENG-4.01-007
On the above, he opens rom.nb1 which is his rom file. Probably the
plain rom image format, i don't know the type. Then he refers to
another 2 files xda1.bin and xda2.bin. In my case i have only one
file, out.bin . He also uses bootloader.nb0, i don't have it or
something similar. Finally he writes nk.nbf file and gives it a
header. In my case i will give a B000FF header.
End.
nicktgr15, for extract files from 2002 and 2003 firmware you can use tools from http://onk.nm.ru/mpx200
Great site my friend onk. Great site. I hope i'll find something. Thank you.
Hi nicktgr15!
Any luck with the ROM extraction for MPx200?
Anyone here on this board can comment too.
I went to the link http://onk.nm.ru/mpx200 but can't really get thinks going with the WM2003 for MPx200.
I've the ROM but using dumprom.exe, I got something like 'can't determine the memory offset'.
So...where so I start?
I really need the SIMManager & Resource Manager for my WM5 MPx200.
Also, would like to have the SIM Tool Kit working on my phone since there's no way to interact with the SIM features.
Thanks anyone!
Please Upload the Dumped WM5 MPx200 Rom you are saying about!It will be a huge step!!!We can edit it,fix some bug,even make it work without the need of the SD Card...!!!
I've uploaded ROM dump to uploads/mpx200_dump directory on xda-developers FTP.
Buildimgfs tool is useless on this ROM, because 2 files in it are broken. Maybe addfile/delfile would work (but they would break data in imgfs_removed_data.bin). And of cause you have to manually remove hole inside ROM before working, and inject the removed data back before flashing. And figure out the format of imgfs_removed_data.bin and recreate it yourself.
For dump WM5 files you can use tool http://buzzdev.net/index.php?option=com_remository&Itemid=100&func=fileinfo&id=83
You must create directory "\Storage Card\" on SD and run this program on smartphone
I think this program work on many other devices with wm5
PS. you can read http://www.wce.by/forum/viewtopic.php?t=1517 (Russian language) about tools for firmware
Onk nice site but i can understand a thing!!!
Have you made a fixed version of wm5 for Mpx200?If yes where i can download it?
My goal is to make a cut down wm5 version that can fit on the 32MB ROM of MPx200...can that be possible?
I'm downloadl WM 2005 for MPX200 smartphone Build 14343 from sendmefile , but link id dead ;(
after extract files from archive, I convert part2.bin and part3.bin to CMCS IMGAGE (use BINtoIMG) and flash images to mpx200 (use Motorola Upgrade Wizard 1.8.x)
wm5 for mpx200 used SD card like /Storage on wm2003 and wm2002 (for save config, datafiloes, program etc)
Internal flash used only for firmware
for replace some files from firmware you can place it to /Windows on SD card
BUT! This build of WM5 work on 80-90% of mpx200 devices ;(
some devices can't run wm5.
And the speed of operation WM5 strongly depends of speed used SDcard (x80..x132 recomended)
Your file mpx200_wm5_bin_B00FF.7z (17460816 Bytes) is now online.
Your Download-Link: http://rapidshare.de/files/14495499/mpx200_wm5_bin_B00FF.7z.html
for extract files you must use 7zip archiver www.7zip.org
what?is this a fixed wm5 version?
does it works without the need of the SD?
NO
this version NEED SD
is there ANY chance to remove some files (Images,Sounds,maybe some prorams) from the WM5 ROM and make it work without the need of the SD?
I believe then,the OS would be STABLE and work Faster.
Let's make a Try!!!
What do you think?
part1.bin сontains magneto with use built-in flash memories (WM5 build 14122)
It is necessary to correct a little. Find in an firmware
Code:
0BFC440: 65 6D 72 65 67 69 73 74 │ 72 79 2E 64 6C 6C 00 44 emregistry.dll D
0BFC450: 65 76 41 75 74 68 2E 65 │ 78 65 00 62 74 68 61 74 evAuth.exe bthat
and change DevAuth.exe to AuthDev.exe for disable Device ID check
But this firmware contains one more "protection" - works before some date.
If before flashing set date 2004 - works normally. If the current date - show a modal system window with the message that is the version for developers.
How to disable this "protection" - it is not known yet
And it is not known about locking the register in this firmware
PS: In Firmaware structure ROM similar 2002/2003 is used. Use dumprom for extract files
PPS: my page is updated. Added simple manual about firmware and tools
mamaich said:
I've uploaded ROM dump to uploads/mpx200_dump directory on xda-developers FTP.
Click to expand...
Click to collapse
Can you please upload this dump somewhere once again? as it seems /mpx200_dump is already deleted from FTP.
Chinese Edition: http://www.coolcode.cn/andot/bin2nb-nb2bin-released/277
Hello, everyone. I find there is no tools can convert bin file to nb file or convert nb file to bin file. so I made these tools: bin2nb & nb2bin. They only can convert os.bin to os.nb, and os.nb os.bin, they can't convert gsm, spl or ipl nb file to bin file.
They are all command line tools, and easy to use.
if you want to convert os.bin to os.nb, you can type:
Code:
bin2nb os.bin os.nb
and then, you will get os.nb file.
when you want to convert os.nb to os.bin, you can type:
Code:
nb2bin os.nb os.bin
you will get the new os.bin file.
The default setting is Typhoon(Feeler/Amadeus), if you want to convert other device nb file to bin file, you can add two parameters:
Code:
nb2bin <file.nb> <file.bin> [offset] [partbytes]
offset is a hex number without prefix, for example, the offset of Typhoon is 80240000.
partbytes is the size of the partition, it is also a hex number without prefix, for example, the partbytes of Typhoon is 1b00000.
Excuse me,
I've a Toshiba G900, I've used the Grab_it tool to create a DUMP of the ROM.
I obtained a "dump.bin" file.
Now I've to create a .nb file from this .bin file.
Do you thing your tool could works?
I've to imput a different code becouse my device is not a Typhoon?
I hope you can help me.
Thanks.
davideuck,
Have you solve your problème? Because i have the same and bin2nb doesn't work for me (My device is a Samsung Player Addict)
Thank,
McCoy.
it doesn't support diamond NB files.... anyway, thanks