Related
Hi,
I have a problem in recognizing my Transcend 2 GB SD-Card.
During operation the MDA Pro "looses" my storage card. I do not need to move the MDA. It also happens when it is on the table.
When I eject the card and put it in again it is recognized again.
Do you have a suggestion what this can be?
Mike
****, I just ordered the same card two days ago. Should arrive today or tomorrow. I let you know what happens.
Unless your card is faulty, try reformatting the card (I know you don't usually have to do this staight out of the box). I have had this problem before, but on the i-mate jam and it would read the card in my PC, but not my LapTop, which has a dedicated SD slot. Go figure. Tried formatting to FAT and FAT32, but I think it doesn't make too much of a difference. For me it came down to the type of SD card being used!
My 1GB Scandisk card works flawlessly and quickly wherever I put it, but my 2GB Scandisk SD Ultra II only works in my PC and transfer rate seems noticeably slower. :?
I already formatted the SD-Card. I also tried Low Level Format with
Pocket Mechanic.
I haven´t found failures with a r/w test. On the PC there are no problems.
Mike
Send it back! :evil:
Send it back! :evil:
Having 2GB MMC works fine with me... Thank God.. was worried
I have the same problem with the Transcend 2GB card. When syncing Avantgo to the card I get a "write teimeout" error. The card is still there when I look at it with the explorer.
2GB SD card
I have no problems with a 2GB Sandisk SD card.
I bought an Integral 2GB High Speed SD card. Initially, my JASJAR refused to recognise the card as anything more than 128 MB. I tried formatting it with Pocket Mechanic (Low level and normal format) - still 128MB. My notebook (with a built-in SD card reader) also saw it a 128 MB. My EPSON card reader did not recognise it at all.
After finding a post on a forum through Google, I found out that the iMate JAM apparently creates a new partition on the 2GB card, and that it was a known problem (for the JAM).
Using Partition Magic, we saw that it in fact created three partitions (128 MB, 1GB and the remainder, but we could not format or use the other).
My husband got the brilliant idea to put the card in my Nikon CoolPix, which told us that the card was not formatted. He told the camera to format it, which worked -- I can now use the card as 2GB in both my JASJAR and my laptop.
I hope this helps somebody ...
Re: 2GB SD card
paulrousseau said:
I have no problems with a 2GB Sandisk SD card.
Click to expand...
Click to collapse
Which type?
THX!
Got no probs on my scandisc ultraII card on jasjar either, but my laptop won't recognise it! :?
Good thing I have a PC too! :lol:
No problems with my UltraII card either...
I always format my cards with my PC or Laptop before using them, and it's always been fine in PPC, PC, and Laptop.
Hi guys! I recently purchased HTC Touch Pro and A-data 8 Gb micro sdhc class 6. My laptop recognizes the card and I format it to FAT 32, so I think the card functions properly. The problem is that the device does not recognize tha card. I updated the ROM with the latest official release from the HTC site , and I was happy finally to see my card. The problem is that after restart, the card is invisible again. Can anyone help me? Maybe the storage card is faulty after all?
Possibly man, i am sure you have another card in there. Test it, if all is ok with it, then exchange your 8GB if possible....
The same thing happened to me; I don't know if it's faulty though. It is recognized at first, and of course I can transfer files from my laptop.
The same thing happened to me; I don't know if it's faulty though. It is recognized at first, and of course I can transfer files from my laptop.
incompatability with SDHC
There is a known partition problem that can destroy your Micro SD (or any other size SD) if you every stuck it into an older reader that does not support newer sizes (any HC, or even standard SDs over 1GB).
Old readers can show your newer SD-family cards, and APEAR to work, until you fill them up past the size the old reader supports.
FOR EXAMPLE:
my old laptop has a built-in SD reader. Back when I used the HTC Wizard, I bought a 2GB miniSD, and dumped files to it from my laptop. Little did I know, the built-in reader only supports SD card up to 1GB. It worked back and forth many times untilI crossed the 1GB line (filled teh SD past 1GB). Then files disapeared or could not be accessed randomly. Kindgston told me it was a known issue of some older devices (readrer/camera/etc): the older device messes up the partition, which you CANNOT fix yourself: reformatting the messed0up partition does nothing. Ship back to manufacturer to fix. Now I'm careful to avoid the built-in SD reader
So I would advise: fill your microSD up aver half-way, and see if you desktop/ laptop has problems accessing files sampled from all over the chip. If it does, this is probabaly your problem.
I think it's just the card/brand itself. The HTC site lists card brands and sizes that have been tested and proven compatible, and the A-Data 8GB isn't one of them (although the 4GB SDHC is compatible). Sandisk is the only 8GB card that's supposedly compatible, and I've pretty much found that out since I had no luck with an A-Data 8GB but the Sandisk works flawlessly.
When I first copied files over to the A-Data and put it in the phone it didn't recognize it at first, but after a couple times of taking it out and putting it back in I was able to read and write to it in TotalCommander, but when I went to play music files the player froze up solid and the card was no longer readable until I did the in and out thing again. Bottom line was there was no way that card was going to work right in the phone, but as soon as I started using a Sandisk I never had a problem.
same thing happen to me
i think the phone will not recognise class 6 memory card
i will try sandisk 8gb class 2 when i got a chance
silly phone
sdhc card problem
chasist said:
same thing happen to me
i think the phone will not recognise class 6 memory card
i will try sandisk 8gb class 2 when i got a chance
silly phone
Click to expand...
Click to collapse
my touch pro two times had the same problem.The sandisk 8gb microsd HC (class2)collapsed.I can do nothing.My computer doesnt recognize the card.I cannot format it also.Does anybody can help me .What can i do.Thanks.
Card doesn't work in my Fuze. Oh well, I'll find another use for it.
Wierd.... I have two Adata 8GB cards, one works in the Touch Pro, the other doesn't. Both of them work in my Sharp EM One.
hi ive been looking like crazy to fix this problem but this seems to be the only post close to it.
i recently got a transcend class 6 4gb micro sdhc (listed on the website as compatible) for my htc fuze. the fuze (WM6.1) has been updated to the new rom version (5.xx).
i put it in nothing happens. it work fine on a computer (via usb reader). i have a kingston 2gb micro sd that works fine (but is used for another device). I really want to get this one to work so its not a waste.
so far ive tried reformatting to FAT, 64K and FAT32, 32K (via windows vista formatting).. none of which work.
really annoying, i dont have any other device that uses this card and i specifically checked this brand and type with the htc fuze and seems like everyone having no probs with it.
any other things i can try? is it a faulty card maybe (but it works through usb reader)?
I am having problems with the 8gb class6 cards as well. I have tried the Adata and the transcend cards. Here are some interesting things I have found.
1. The energyrom series of roms seems to be the only rom that lets me see the card.
2. I can't access the card until it the rom loads.
3. I can flash roms from the card even if I cant access them from the phone.
I did see there was a utility to help load SDHC cards called SDHC_WM6. I was never able to get it to load right but it indicates there is some kind of software driver that might help these cards.
BOBBYDAVIS44 said:
I did see there was a utility to help load SDHC cards called SDHC_WM6. I was never able to get it to load right but it indicates there is some kind of software driver that might help these cards.
Click to expand...
Click to collapse
I saw this utility too.. but its for windows mobile 6 not 6.1.. when 6 came out it had no support for sdhc so that thing came out, 6.1 should have support from the start
of course that didnt stop me from trying it anyway... doesnt work
I have a 8 gb Sandisk- Works flawlessly. I have a 16gb Adata( class 6) that worked for awhile then stopped. Put the 8gb- works, 16gb doesnt. tried different ROM- Still same effect. I has to be the Adata card. I am going to try a 16 gb Sandisk when my funds are available.
Oh- the 16 works fine in the microsd/SD card reader......
SDHC Class 6 works in HTC Jade
I have a jade and both cards that refuse to work with my fuze work just fine with the htc jade. I am not sure if it is a hardware problem or an issue with some software such as the sdhc.dll.
My thought is it is probably software. Why?
First the class 4 cards work just fine. In fact I am currently using a Dane-elec 16gb class4 card.
Secondly I am able to get intermittent class 6 cards access if I use one of the NRGY roms.
I have been using a 8gb Adata card that I bought from newegg, and it has been working flaslessly since november.
I recenlty bought another 8gb Adata from meritline, and this one does not get recognized by the fuze.
I then read in the above posts that somebody used Total Commander to copy files, so I opened up Total Commander, and the card is shown there.
I closed the the program, and now the File Explorer can see the card as well.
Maybe you can try the above steps and see if it works.
edit: actually, I have to plug in and out a few times for the phone to see the card...
I also have this issue with my transcend 8GB class 6 microSD.
HTC Touch Pro (T-Mobile), upgraded to EnergyRom. After upgrade, able to work perfectly. After few hours (the phone of course went into sleeping mode), then the phone was not able to read the card, so starting application installed in it makes the phone hangs.
After a while, the application (10-15 mins) was able to start, then everything is normal again. Very confusing.
At the moment I am assuming it's due to the sleeping mode, somehow the phone (software??) was not able to 'resume' reading from the micro SD.
Note: Previously somehow it clashed with the keyboard mapper software (pro_fuze_keyboard.ZIP), then I uninstalled it, then it was fine. Then I install another version of keyboard mapper (Shlomki TouchPro Keyboard in Fuze ROM.cab), then it's fine again, so I now stick with this mapper. However above issue is still happening.
I read some thread about changing some registry (pnp** set to 8196), so I set it. However still the problem persists.
I haven't tried other suggestion to tweak other registry values. Here's the thread on Hermes device: http://forum.xda-developers.com/showthread.php?t=294324&page=29
I am wondering if it's really class 6 problem. Is there anybody having the same issue with 8GB class 4?
Note: my PC can read the card without any kind of problem.
I put the microSD into N95 also without any problem.
and i have the same problem to touch pro will not recognize my sdhc 4GB class 6, and i have no problems with 4GB class 4.
HI Bobby,
Were you able to get the Transcend 8gb Class 6 work on the HTC Fuze? I have the same problem. I upgraded the rom from the HTC site and I could see it. But later I plugged the card using the adapter to the laptop to copy some files and when I plug that back into the phone, it says "Not Installed". My happiness of not losing 20 buck was only for a couple of mins Any help is appriciated?
Can you give me download link for the energy rom which actually worked with the card?
yukster said:
Wierd.... I have two Adata 8GB cards, one works in the Touch Pro, the other doesn't. Both of them work in my Sharp EM One.
Click to expand...
Click to collapse
I had somewhat of a similar issue, wondering if anyone else has seen this?
8 Gig no name brand MicroSD card in my TouchPro, all of a sudden I had less than 1 gig left, using Resco I couldn't see a thing taking up all that space but it was all gone.
I put the card in the transflash adapter and looked at it on my desktop Windows Explorer and saw the following folders in \Storage Card\Program Files
one directory named (*#LD*))#KDP|} with some text after it
another directory named (#*(Y%*(#(*#*(@#kKD* with some text after it.
NEITHER directory could be renamed, moved, deleted, or anything.
Formatting the card hung the format process.
Finally, I put the microSD card back in my TP and all of a sudden Resco Explorer saw these directories and so I just deleted the Storage Card\Program Files directory (no programs in it) and formatted the card and everything was fine.
Anyone else ever seen this?
I have installed the total commander on my sd card and all of a sudden my card stop reading.i restart the system and then got the message to format the card in order to read it. i did but still card was not reading. i inserted the card in my pc but still the card was not reading. i bring my hd2 to factory settings and then also not reading the card. then i again format the card but of no use. any help from anyone.
same here
i got the same problem recently. my 8gb sdhc stopped working. whenever i insert the card in my hd2 it says the card needs to be formatted before use. when format it says formatted successfully but the sdhc does not show anywhere as if there is no memory card in the hd2. computer also does not detect the card. it is the stock 8gb sandisk sdhc supplied by htc. only been using it for 1 week. anyone else has got this problem? do you know what may has caused this? any help will be appreciated. thanks!
Same problem here,
my (HTC supplied) 8gb SanDisk SDHC card stopped working after about 3 weeks use.. I got "do you want to format the card to make it readable.."
Tried different phone (HTC Kaiser), cardreaders on 2 different laptops, winxp/win7/debian/knoppix even canon photocam.. Several restore programs/format programs.. Even tried putting it in the refrigerator over night..
All no luck.. I gave up! (now missing some nice vids from my son..)
sync my SD card almost daily now..
dwali said:
Same problem here,
my (HTC supplied) 8gb SanDisk SDHC card stopped working after about 3 weeks use.. I got "do you want to format the card to make it readable.."
Tried different phone (HTC Kaiser), cardreaders on 2 different laptops, winxp/win7/debian/knoppix even canon photocam.. Several restore programs/format programs.. Even tried putting it in the refrigerator over night..
All no luck.. I gave up! (now missing some nice vids from my son..)
sync my SD card almost daily now..
Click to expand...
Click to collapse
now many user are getting this problem. i don't know if this problem is with micro sd supplied by htc or the phone itself damaging memory card. what is weird is that it seems only the memory card sandisk 8gb supplied by htc seems to be concerned. i just hope after buying another card it does not get damaged too.
HINT
someone told me to put the card in the digital camera and try formatting the card over there. digital cameras have their own format scheme, but i don't have digital camera........its worth trying it...........people called digi gurus told me about that...........
Another card down for htc hd2
I brought a new card 4gb sandisk micro sd. its gone showing me the same message which i was getting it with my 8 gb card "format the card in order to read it" what is the problem is this a problem with the phone or with the card. it is unbelievable that my new card is also showing the same message. what is going on.
I want to know what is the problem, problem with the phone or with the micro sd card.
this is the second card which got damaged......
exact message """" DO YOU WANT TO FORMAT THIS STORAGE CARD TO MAKE IT READABLE? THIS WILL PERMANENTLY DELETE ANY FILES ON THE CARD. PRESSED YES . THIS STORAGE CARD HAS BEEN SUCCESSFULLY FORMATTED. """
NOW IF WE SEE UNDER SETTINGS SD CARD AND PHONE STORAGE NO SD CARD IS SHOWING OVER THERE.
what is the reason behind it??????????????????
I HAVE JUST TAKEN OUT THE USB FROM THE CHARGER NOT FROM THE COMPUTER AS IT IS CHARGED BY THE USB CABLE.
I am still struggling with the first card warranty from the HTC and now my second card with same message is gone down.
vikramdeepsingh said:
someone told me to put the card in the digital camera and try formatting the card over there. digital cameras have their own format scheme, but i don't have digital camera........its worth trying it...........people called digi gurus told me about that...........
Click to expand...
Click to collapse
i have a digital camera panasonic dmc-fz28. i did try to format the card with the camera. but this doesn't work. you said you got another card damaged by the phone. i think the problem is with the phone itself then. send the phone to your local dealer for repair and see what they say.
My 1 year old 8GB Sandisk microsd corrupted second time since 2 weeks. It happend after running OPERA 10 installed on SD. My HD2 is running on Energy ROM.
vikramdeepsingh said:
someone told me to put the card in the digital camera and try formatting the card over there. digital cameras have their own format scheme, but i don't have digital camera........its worth trying it...........people called digi gurus told me about that...........
Click to expand...
Click to collapse
Tried that too.. no luck.. (Canon powershot A430)
Now using an older (got it with my HTC Wizard) sandisk 8gb, working without probs for over a month now.. (backing up a lot though..)
Ok i am having the same issue with my class 10 16GB Kingston. All of a sudden after syncing the memory card failed. The phone recognised another class 2 4GB sandisk and works fine. THIS SEEMS TO BE A PROBLEM WITH THE PHONE. and one which has set me back £70 (Not good at all) and is something that only seem to have happened since the intorduction of the 1.66 rom for me
I had similar problem but there wasn't any message, once I go to photo album the card won't be read and all programs from card can't be run, finally took out all the videos/photos and now is fine, gotta be some software glitch.
happened to me also..i lost photos that i wasnt able to back up yet..do i need to buy a new sd card then? this is really frustrating :,(
I got the same problem with my 8Gb Sandisk SD card. after that i installed another 8gb card (from my nokia 5800) on my phone & its been a month & working fine. I think it happened to me after I installed firefox's fennec alpha on my sd card.
Maybe it has something to do with the CLASS of mSD.
When I received my HD2 I bought a 16GB SanDisk mSD from Amazon, installed it and worked fine for half a year. Just by chance it was a CLASS 2 as I looked up now beeing very concerned by this thread. Now I bought the 32GB mSD from SanDisk (also CLASS 2), copied the contents from 16GB card to 32 GB card and it works flawless.
Now let´s check: was there any one with a bricked CLASS 2 mSD ? Or only mSDs of higher class bricked ?
If so we have to aks some hardware-specialists here wether a class 4 or higher card gets bricked because of faster data throughput since these cards seem to be bricked PERMANENTLY ? There could be several physical reasons: Voltage, Ampere, Controller etc.
I got a bricked 32GB class 2 Sandisk card. It was fresh out of the box and I got an RMA from Sandisk. Awaiting for replacement.
I thought it was just a faulty card off the production line, since my stock 2GB Sandisk card still works fine. It shouldn't have been the phone, should it?
Need help
troed said:
Maybe it has something to do with the CLASS of mSD.
When I received my HD2 I bought a 16GB SanDisk mSD from Amazon, installed it and worked fine for half a year. Just by chance it was a CLASS 2 as I looked up now beeing very concerned by this thread. Now I bought the 32GB mSD from SanDisk (also CLASS 2), copied the contents from 16GB card to 32 GB card and it works flawless.
Now let´s check: was there any one with a bricked CLASS 2 mSD ? Or only mSDs of higher class bricked ?
If so we have to aks some hardware-specialists here wether a class 4 or higher card gets bricked because of faster data throughput since these cards seem to be bricked PERMANENTLY ? There could be several physical reasons: Voltage, Ampere, Controller etc.
Click to expand...
Click to collapse
I have already lost two micro sd cards one 8gb which I got with the phone and one 4gb which i brought it. Now I am using Nextar card 4gb. it seems to be fine till now, is there any problem with the scan disk cards?
Is this a reliable gadget after all...???
dwali said:
Same problem here,
my (HTC supplied) 8gb SanDisk SDHC card stopped working after about 3 weeks use.. I got "do you want to format the card to make it readable.."
Tried different phone (HTC Kaiser), cardreaders on 2 different laptops, winxp/win7/debian/knoppix even canon photocam.. Several restore programs/format programs.. Even tried putting it in the refrigerator over night..
All no luck.. I gave up! (now missing some nice vids from my son..)
sync my SD card almost daily now..
Click to expand...
Click to collapse
Ok, now I am pissed. My situation is almost identical as yours - including the loss of my son´s new vids and pics... - and I have the HD2 for almost 2 months now.
Suddenly the 8Gb SDHC stock card just stopped working. It came from nowhere. I found it when I tried to watch a video and the player was not showing it. Then I got into file manager and the storage card was missing... after a soft reset, the appaling msg appeared: "Do you want to format this storage card to make it readable? This will permanently delete any files on the card."
What I did recently: installed uZardWebP and MS-NetC3.5 yesterday. But the SDHC access was alright after that.
I am surprised about how many ppl have been at the same situation.
What the heck is going on? Do you guys know if HTC has ever said something about the subject?
If I cannot recover the content of this card, it will be the first and the last HTC unit I will ever get my hands on. Four years using a Sony Ericsson and a Nokia unit with a SD card and no problems whatsoever.
Occurrence could be considered usual if there weren´t so many incidents like mine.
If someone has ANY idea about recovering the card data I would be very grateful. (although I am hopeless after some reading... ...)
Regards!
HTC Leo (HD2) / ROM 1.66.707.1 (76641) WWE / Radio 2.07.51.22_2 / Manila 2.5.19211619.0 - All stock - device´s never been flashed.
I have lost 2 cards. I haven't changed the rom.
Both sandisk I blamed ebay.
Maybe I shouldn't.
Andrew u.k.: Agreed. Maybe you really shouldn't blame ebay.
So far my card recovery was unsuccessful.
At least I won't need to read a lot to learn how to burn a new ROM as long as I won't use this "Card killer" as a serious gadget after all.
most the time a hard reset fixes it...better then loosing valuable sd info over settting up phone again(just happened to me after loading lots of apps on sd didnt read any sd hard reset and its all normal)
Just received a 32Gb sd card and copied over all my files and cabs etc.
But when trying to reinstall the .cabs to my storage card and keep getting this message "installation of .cab was unsuccessful" ?????
has anyone got any ideas? I have had to go back to my sd card?
didn't think there was any decent 32gig cards available yet, did you format the card in your phone first?
The correct procedure (which I did only last evening with my new Sandisk 32GB mSD, it will take approx. 2hrs. depending on capacity and content of old mSD - mine had full 15,5GB):
1. Put back old SD-card
2. Switch HD 2 into flight mode (!!!!)
3. Connect to PC in HARDDISK Mode (not ActiveSync)
4. Open mSD card on PC and make ALL files accessible (also system-files etc.)
5. Copy entire content of old mSD to a fgolder on the PC
6. Disconnect HD2 from PC
7. Switch HD2 off and place new 32GB mSD into HD2
8. Switch HD2 ON
9. Check if mSD is recognized and shows right capacity (29-31 GB depending)
(EDIT: 10. Format mSD with format-prog in Settings-menu. HD2 STILL IN FLIGHT MODE !!!!!!!!!!!!!!!!!!!!!!! (EDIT!!!: MAYBE BY FORMATTING YOU COULD GOOF THE CARD, SO BEST IS TO USE IT AS IT IS RIGHT OUT OF THE BOX !!!! AND TRY TO FORMAT IT ONLY IN CASE IT DOES NOT WORK PROPERLY OUT OF THE BOX !!!!!!!!!)
11. Connect HD2 again in Harddisk-Mode to PC
12. Copy all files from backup-folder of PC to the new mSD
13. Disconnect HD2 from PC
14. Switch HD2 OFF
15. Restart and enjoy Your new richdom of mem-space
DO NOT ACTIVATE ANY RADIO (GSM, 3G, HSDPA, WIFI DURING ENTIRE PROCEDURE !!!!!!! It might brick Your new expensive mSD-card cause WM once in while writes to it creating funny disorders on the new card.)
After restarting with new mSD there might be a "services.exe"-error. Switch off again and switch on again. No error-message any more.
I strongly recommend to invest 24 bucks for pocket mechanic or SKTools (I prefer PM but have both running). It helps You to optimize Your entire HD2 and evaporate all crap accumulated when playing around with install and del of mods and apps. Makes WM pretty stable and snappy
troed thank you, but i am still having problems????
i have a games folder with cabs in and when i copy them over they dont even show and a few other folders have become like encryted??? cant open them or delete them ??? maybe the card is faulty????
Most problems with uSD cards seem to be caused by low capacity fakes being sold as high capacity branded cards.
I'd suggest checking it with h2testw - or alternatively if your new 32GB uSD card isn't a sandisk card bought from a reputable retailer for a lot of money, you don't need to test it to know that it's fake.
antilagman said:
troed thank you, but i am still having problems????
i have a games folder with cabs in and when i copy them over they dont even show and a few other folders have become like encryted??? cant open them or delete them ??? maybe the card is faulty????
Click to expand...
Click to collapse
Well, andyfoster could be right .....
I always buy my SD and mSD cards (only Sandisk) either at amazon, expansys or mobilefun and never ever had a single problem with them (e.g. I also run 32GB SD and MemStick in my Vaio).
Once I bought a Pretec 128GB SSD Express Card for the Vaio, filled it with read only files ...... worked ........... but when I wanted to check the content the SSD was dead/bricked.
What else could it be theoretically ?
Once I bought a Kingston DataTraveler-USB-Stick 64 GB and wanted to fill it with vid-files. In copy process it got stuck so I formatted it and now I have only 32GB available.
Why ?
As delivered the 64GBstick was formatted FAT 32, allowing only files less than 4GB saved onto it. This my fault then. One vid-files was 6 GB and gave an error. But when I destroyed the original format from Kingston with my formatting I lost half of the capacity with no workaround left.
What do I wann say with this ?
I don´t know if THAT could be the case, but MAYBE these high cap-SDs do have a special "Factory-format" that should not be changed ! When I received my 32GB mSD IT WORKED PERFECT OUT OF THE BOX ! I did no format. But, honestly, since it is a lill bit expensive I don´t wanna experiment with formatting it now.
But MAYBE it is a fake-card ..................
Yes, the first thing to know is how much you paid for the card and what brand it is... we've seen "ORIGINAL KINGSTON 32GB MICROSD CARD NO FAKE!!!1!ONE" on ebay, when Kingston never manufactured a single 32GB card yet...
This is a sandisk by the way, (well it says sandisk on it ) and its funny you mentioned the format? it is formated wth the name fat32 hhmmmm and i am trying to put 13gb of stuff on it???, I have reformatted it again last night it took hours?? I might try again and if not i will just have to have a replacement?
after trying again, i notice this error regarding certain file names are to long??? and also if i create a folder and name it vids or movies it automaticly puts folders in side which cannot be opened or deleted? and the folders name will be ".?:-~~{"
its got to be the card right?
I have returned the card and asked for a replacement?
troed said:
Well, andyfoster could be right .....
I always buy my SD and mSD cards (only Sandisk) either at amazon, expansys or mobilefun and never ever had a single problem with them (e.g. I also run 32GB SD and MemStick in my Vaio).
Once I bought a Pretec 128GB SSD Express Card for the Vaio, filled it with read only files ...... worked ........... but when I wanted to check the content the SSD was dead/bricked.
What else could it be theoretically ?
Once I bought a Kingston DataTraveler-USB-Stick 64 GB and wanted to fill it with vid-files. In copy process it got stuck so I formatted it and now I have only 32GB available.
Why ?
As delivered the 64GBstick was formatted FAT 32, allowing only files less than 4GB saved onto it. This my fault then. One vid-files was 6 GB and gave an error. But when I destroyed the original format from Kingston with my formatting I lost half of the capacity with no workaround left.
What do I wann say with this ?
I don´t know if THAT could be the case, but MAYBE these high cap-SDs do have a special "Factory-format" that should not be changed ! When I received my 32GB mSD IT WORKED PERFECT OUT OF THE BOX ! I did no format. But, honestly, since it is a lill bit expensive I don´t wanna experiment with formatting it now.
But MAYBE it is a fake-card ..................
Click to expand...
Click to collapse
what follows is unrelated to the main topic in this thread...
about the bold part in your post above...i thought i should tell you that there IS a workaround!
fact is that FAT32 is a file system in which a single file cannot be larger than 4GB. you should have gotten an error from explorer BEFORE even a single byte of the 6GB file was written.
more importantly, you should know that FAT32 fully supports very large partitions like 100GB, etc (at the cost of slower performance and/or wastage due to large cluster size at that capacity). what most people conclude is that it SEEMS like you can only create up to 32GB FAT32 partitions "at home" while larger sized FAT32 partitions can only be "created in a factory format". this misconception is entirely because the disk management in windows 2000, XP, Vista, and 7 enforce this limit when formatting!
google it and you will see that it is just an arbitrary limit by microsoft and these same operating systems have NO PROBLEMS reading/writing FAT32 partitions greater than 32GB. once again, it is JUST an arbitrary limitation of the default formatting routines shipped with windows. there is a great little tool (i forget the name of the program but its executable is called "guiformat.exe") that will allow you to format FAT32 greater than 32GB.
all of the above got me thinking about something though...it seems that manufacturers have chosen FAT32 as the de facto standard for most mobile devices with removable card storage (like smartphones, digital cameras, mp3 players, etc), likely because of FAT32's lack of complexities like security and the standard's relative "openness" compared to that of NTFS, for example. makes me wonder about the nice surprise people will start to have once greater than 32GB cards become available and when people will attempt to format them with windows, expecting everything to go smoothly...but oh the horror when windows won't let them format greater than 32GB. good times ahead!
Using an HD mini, latest ROM 1.36.401.1 fitted with a 32GB memory card.
Phone syncs fine and I can copy files to the storage card using activesync but as this is very slow with larger files I've tried to use the disk drive mode.
Problem is that the file starts to copy and after a few minutes of transfer I get the error message "The Parameter is incorrect" After this I have to disconnect the phone and reconnect to be able to try again.
It was one of the reasons I bought the phone and added the memory was to be able to load on some video to watch. I use it for music files and sysnc these using media monkey with no problems at all.
Any idea's....?
I checked the HTC site but found nothing, I've also formatted the card in the phone in case it didn't like it being formatted in the PC.
I use a Sandisk 8GB Class 2 SDHC card, never experienced that kind of problem. But I have to say I never tried any files larger than around 1 GB.
What brand do you have? And how big are the files?
The card is unbranded and the video files are 80 - 170MB. I have some other cards so I can try one of them to see if this fixes the issue.
might be the usb data cable ,have you tryed another microusb cable ? or try to load files to microsd using sd-(usb)adapter and see if you still have this error
I tried another cable but the same thing. I've also tried a 1GB Sandisk card as well and that runs with no problems. This unbranded card claims SDHC but maybe it's not high enough quality for the HTC. Wouldn't be the first time a product rejects a certain media.
I've actually just ordered a new Sandisk 16GB class 4 card to try that one out. Should have it early next week and will report back what happens.
Ok, I think if you run a checkdisk on the 32GB card it will report errors. It could be a cheap clone from China, which are known to have quality issues.
Roy_S said:
I tried another cable but the same thing. I've also tried a 1GB Sandisk card as well and that runs with no problems. This unbranded card claims SDHC but maybe it's not high enough quality for the HTC. Wouldn't be the first time a product rejects a certain media.
I've actually just ordered a new Sandisk 16GB class 4 card to try that one out. Should have it early next week and will report back what happens.
Click to expand...
Click to collapse
hi
where did u order sandisk card from?
MobileMini said:
Ok, I think if you run a checkdisk on the 32GB card it will report errors. It could be a cheap clone from China, which are known to have quality issues.
Click to expand...
Click to collapse
When I tried it in the PC it ran with no problems it was just in the phone that I had problems.
tzacapaca said:
hi
where did u order sandisk card from?
Click to expand...
Click to collapse
Ordered from eBay but a supplier that sells them in original packaging plus gives a guarantee that they are originals.
So received a new 16GB card today, fitted to the phone, copied over some files, so far so good. But then TCPMP would not read the video files saying the MP3 codec is invalid and the other thing I notice is that the storage card is now called Card2. In explorer from the PC it shows two storage cards as:-
Storage card
Storage card2
I seem to be going backwards, powered the phone off/on numerous times, also with the card removed, reformated the card but can't stop it from seeing the card as card2.
Getting so pi$$ed off with this now.
OK a quick update, I fitted the original 1GB card, the phone recognised this as the first storage card and the card2 reference disappeared. I fitted the new 16GB one and all back to normal no card2 issue.
What I don't understand is how it happened and what changed it back. As I intend to load TomTom onto the card the last thing I want is this happening again in the middle of driving.
Never heard of this problem before. Can't think of a cause, maybe something with partitions on your SD card?