Hi All,
I have a strange problem, tried to search the forum,
without success...
Sometimes the OK button doesn't response (both OK buttons...),
only clicking OK on the screen works.
another issue - sometimes when clicking the action button nothing happens, or even worse - it acts like a long press even when I press it really shortly...
Any one else had such problems?
Is it (as I guess) a hardware problem?
I have the same problem and I dont think its the hardware cause the button is not presented in "buttonmapping" in the controlpanel. This has worked before. Please respond if you solve the problem.
Mine does it on occasion. Pretty sure it's software and It seems to happen with the same apps each time. Make note of what apps you have running when it happens.
Just started doing it again but I realized that I have never had a prob with the OK or Start Menu buttons but rather the softkeys. In Today Agenda, the left key (edit) stopped working and then a few minutes later the right key (menu) stopped working. I closed all apps and the problem persisted with every appointment I opened. Soft reset fixed it.
I should also add that I am not using the latest version of Today Agenda because I have not figured out how to make it look like the version I am used to.
Might be related: a lot of games I have tried don't seem to support the softbuttons, phone buttons, or really much else besides the directional pad and center select button.
I installed the HTC.Kaizer.Home.Plugin.with.Tabsetting.schen on my Alltel PPC6800. After setting up the weather tab for my city, setting up the pictures in the favorites tab, I was toying around in the launcher tab to see what the different icons did. When I tapped the 3rd one from the left (appears to be the one that adjusts the backlight) it turned off the backlight on my phone!!
I've tried everything I can think of to turn it back on with no luck. I tried pressing the power button, every other button on the thing, soft resetting it, and pulling the battery for as much as an hour and then restarting it. NO LUCK!! The phone appears to be working since I can press the phone button twice and call the last number called. I just can't see the screen.
WHAT DO I DO!!!! Is there anyway to hard reset it without going into settings and clearing the memory? Or is there some shortcut to turn on the backlight?
Oh, and BTW, it still syncs with my PC. (Again, I just can't see the screen!) So is there anyway to make any needed changes, hard reset, or anything else via active sync?
Sorry for such a retarded first post but I am at total loss here. I've searched and haven't found anyone having had anything similar to this problem. At least I haven't found it. Apparently I'm not as smart as I thought I was.
Much thanks in advance for any help provided!! I really depend on my phone!!
ActiveSync Remote Display. You sync your phone with the computer, run ActiveSync Remote Display on the computer, and it will display the contents of the screen. It's how a lot of people get screenshots of what is on their phone. Special installation instructions for WM6.
http://forum.xda-developers.com/showpost.php?p=1674053&postcount=5
http://www.microsoft.com/downloads/details.aspx?FamilyId=74473FD6-1DCC-47AA-AB28-6A2B006EDFE9
bigdave -
You need to hit the same backlight button again. That will toggle through several levels of back lighting, one of which is off.
Hi guys,
I'm very new to pda's/smartphones 'n stuff, so be gentle.
I have a Touch Dual since few days, and the one thing that irritates me is the keyboard backlight. When typing an sms the lights go off just after 8 seconds or so... That's too fast for me, I still have to get used to having a qwerty keypad on my phone.
to be clear: I don't mean the backlight on the display itself, buy the light beneath the keypad when open.
Is there a registry setting, or a tweak/application that could correct this for me?
Thnx in advance,
Lukas
same problem here...
You could try the most excellent KaiserTweak, I've found most of its tweaks to be compatible with my Nike, haven't tried the backlight though -> http://www.jongma.org/KaiserTweak/
yes try the kaiserTweak. it's under option Keyboard->backlight. The default value is 10 sec. you can up the time to more in the tweak.
Downloaded the tweak app, changed the keyboard setting and a bunch of other interesting settings (because I'm a curious idiot in case someone asks) and now the device kind of hangs on the password screen... I can't unlock anymore.
The device reacts to taps and both screen and keypad input. Also, if I type the wrong password I get the obvious error message. If I type the correct passcode, and tap 'unlock' then nothing happens and after a minute or so the * disappear and I can start over again..
Is this a known bug?
What do I do now? Hard reset? That will wipe out all my settings and files right?
Thnx
Lukas
please help... Hard reset did not help. Device is still unresponsive...
This are the numbers I get when the device is booting:
M 04
B 04
R 1.58.16.27
G 25.61.30.03H
D 1.31
just want to make sure you did your hard reset correctly. how did you do it exactly? the button by the battery after you remove the back cover?
I took this from the manual because from what you described. doesn't sound like you did it correctly. a hard reset should put it back to its factory setting.
Hard reset
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings -‑ the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
To perform a hard reset
1. Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the left side of your device.
2. Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press ENTER to restore manufacturer defaults, or press any other button to cancel.
3. Release the TALK and END buttons, and then press ENTER on your device.
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
Hi Fatlove...
Indeed you're right. And I did read my manual. And I did it EXACTLY like stated in the manual.
This is what I posted in the General forum:
Ok,
This is going to be stupid, but I'll admit to it anyway...
I've read in the manual on how to perform a hard rest. It states to push the send and end buttons, keep the pushed in, and then press the soft reset button until a text appears on the screen. That text states to press "Enter" to continue, and any other key to cancel.
Well, the 'Enter' key to me is the 'enter' key on that qwerty keypad, not the shiny silver button between the Send and End buttons.
To the writer of the manual the enter key on the keypad does not exist.
So that's why a hard reset did not help. Because I did not perform one.
My bad. Anyways, my phone is ok again, sorry for the doublepost.
Grtz
Lukas
Anyways, thnx for the reply, and for the record: the keypad backlight still doesn't work after har reset and re-applying the keiser tweak. Still lit only 8 seconds or so. Does it matter that I copied the Keiser executable to my storage card? It doesn't have to be on the device itself now, does it?
Thnx again.
Lukas
Nope.. kaisertweak is not working for this property (Keyboard backlight)
Anyone
I tried several Registry settings but nothing worked so far.
Anyone else had succes?
Still no solution for this problem?
It's pretty annoying
I tried changing values in the registry as well, but nothing worked. So I'm also interested in a possible solution...
Damn, I hate that light turning off that quick. There must be a solution
I also have been trying a lot of registry settings without solutions
Anybody knows?
I tried this kaiser tweak on my dual and it had no effect. Had to remove it.
kaiser tweak had no effect on my dual either..
qwerty key board
hello i have the htc touch pro and my external keyboard light go's off in about 3 sec does anybody now how to get the time longer
I've the same problem, keyboard backlight stops after about 8 seconds
I tried some register settins and also with Advanced Configuration Tool (Julien Schapman), but no result.
Hope somebody can fix this
So I am not sure what I have managed to do to my phone, but if I reboot it I get the mornal splach screens but when it finishes the boot, iget the start button and the Contacts and that is it. I don't see a home screen at all. I have found if I sync the phone with my PC the screen comes back on tis own and then as long as I do not reboot it, the screen stays. Also it seems to let me get calls in fine and make calls and the comm manager shows up as for the contacts. if I press the start button though it does nothing. Does anyone have any idea on this?
My phone is the Audiovox SMT5600 I upgraded it to WM6, and this all seemed to start after I uninstalled the google Search. I tried reinstalling it but it is still the same thing.
When phone is in standby:
1. Incoming call
2. I answer - quiet! Time counter go on, but I can't hear caller and caller can't hear me. Push "End Call" button.
3. Screen and keys not respond! Can't be switched off. The whole phone locks up.
4. I have to remove back cover and soft reset!!!
I have Htc Rom 1.66.
Can anybody else report if they have or had this problem?
Did anybody find a solution?
My phone has been in by HTC already 3 times for repair!!! They keep sending it back saying that problem is solved, but it's not!!!
You could be having notification queue issues. Try the solution in the thread "HD2 died- or did it" and see if that works for you.
WB
I don't think its a queue issue because this happens even after a hard reset.
Could it be that some program corrupts Rom so that the problem even happens after Hard reset?
I doubt it. However it is just as likely that you may have installed a piece of software that is, how shall we say, not behaving itself properly.
If I were you I would hard reset (backup your data first) then install your contacts. If you can, use the phone for a day or so without anything else loaded and see what happens.
I would not dismiss the notification queue issue at all. Causes more hassle in winmobile than anything else I know!
Let us know how you get on.
WB
This happens even after a hard reset and no software no contacts no alarms and nothing in calendar.
I know that its not hardware problem because when I make call or if I answer call when not in standby, then phone behaves normally and doesn't lock up.
I had that problem aswell, I´m using a Danish ROM, and had Co0kiemonsters version with 20 quicklinks installed. After I removed that program it worked without any probs.
Remove all programs U have on Your phone or Re install/upgrade that´s faster than removing the progs.
Instal those programs U had before your problems started. and test what might not work with your ROM
locks during call
Mine has started doing the same thing - locking during an incoming call or I can't disconnect after making a call unless I soft resent. The only think I have added recentently is HD2 tweak