Visual studio 2005 std. pocket pc 5(Imate jasjar) win xp pro.
I try to delpoy a simple app to the device and get the following error.
Error 1 Deployment and/or registration failed with error: 0x8973190e. Error
writing file '\Windows\NETCFV2.wce5.armv4i.cab'. Error 0x80070070: There is
not enough space on the disk.
Memory
Storage 1.45 MB free
Program 11.40 MB free
Storage card
289.48 Free
I aslo downloaded NETCFSetupv2.msi from MS site and this falls over when
repair is selected with error
Application manager cannot install this application on your device due to an
invalid setup file. re-instI did a remove and re-install.
Memory needed 2.5 only 1.5 in main memory installing to storage card failed
Unistalled net framework and other apps from device
Storage 12.30 MB Free
Program 9.14 MB free
re-installed netcf2. Space need 5476
Install fails with error Stop all apps and processes, maximize available
storage and run install again
Any help appreciated
SteveW
I also have the same problem.....
Are you guys trying to install to the SD card or the main memory?
Main memory for me......
I also have problems for installing Tweaks2k2.
netcf2
I am trying to instal to main memory
Related
ActiveSync first (or a .cab for that matter) first copies the files to the MAIN MEMORY STORAGE temp directory and only then, you are asked when would you like the program to be installed.
Since I have just about 9mb of free storage ram on my main memory, I am unable to install 20mb of so programs even if I want to install them on my SD card. Because the WM2005 installed always first copies to a temp dir on the main memory. that's stupid. How can I install large programs to my SD card if I don't have much room on my main memory then?
Help please.
Thanks
MOBILER
look for the cab file first, manually copy it directly to your SD card and run it from that location using explorer.
try reducing your temporary RAM by disabling all of your today plugins and windows startup folder, run your program, then set them back again.
how is it you are running on 9mb, i reset my device when it gets down to 15mb, and usually starts up with 25mb with SPB PP SPB Diary SPB weather and MS Voice Command all running at startup, so how is yours so low?
ACtivesync copy the cab file to SD if your memory is low. I installed many big (20 Mb) programs using it. The normal behaviour is to copy the file without question, then ask on the pocket where you want to install it. When you are low on memory, it ask me on the PC (as it was on previous WM2003 models) where to install, then it copies the file to SD. It usually fail to install, but you can then soft reset and run the cab from the SD.
I have a SPV M3100..
Recently i tried installing the Net framework cab file on my sd card.
But before the installation could finish i got a message stating Storage Memory Low.. ...
To free up the memory i also uninstalled the mobile shell but of no use..
Any suggestion how i can install the programs on the sd card .. i have around 5Mb free Storage memory...
looksof_a_devil said:
I have a SPV M3100..
Recently i tried installing the Net framework cab file on my sd card.
But before the installation could finish i got a message stating Storage Memory Low.. ...
To free up the memory i also uninstalled the mobile shell but of no use..
Any suggestion how i can install the programs on the sd card .. i have around 5Mb free Storage memory...
Click to expand...
Click to collapse
It may be that you have too many apps installed to main memory but equally important are other things:
1. Clear your P. Internet explorer history and saved files in the PIE options menu.
2. Do a soft reset (stylus in hole) you should notice far more memory on restart. Various temp files are cleared and memory leaks sorted by doing this.
3. consider getting an app. that that cleans out various temp files etc - there are a few around.
Mike
PS uninstalling some programs leaves behind large settings files.
hi everyone!
i'm havin some problems with installint tomtom on my trinity. i downloaded the trial verison from tomtom, where you can choose one free map from a city and use it. when i start the .exe from the pc it just starts installing tomtom on my device and my device won't even ask me where i want to install it. then when the install is almost complete the installer tells me that my memory is critically low and the installation fails. no matter how many programs i have running in the background or if i close everything else or deinstall everything, it doesn't want to install iteself. i've alrdy looked through the forums here but i couldn't find a solution to the problem. is there anyone who could help me plz?
The memory problem warning is about storage memory and nor program memory.
The installation pack is copied to internal memory and it's also installed in internal memory. So, for the installation to succeed, you must have at least the double of installation package free.
One can also extract the needed cab and run it from memory card. As for this I can't remember how to do it but has something to do with the temporary extracted files by the installer.
thx very much! i'll clear the storage space as soon as i have time and i'll try it out.
Well,
My phone has been saying that is has low memory. I have a 2gb card, and want to know how I can clear up the phone, and transfer some temporary files onto the card. maybe some e-mail attachments, and text messages.
I have only installed the following:
-Weather on the go
-Battery Status
-Google Maps
-Streaming Media
I also HAD Pointui installed, but I couldn't uninstall it, so I just went to the folder, and deleted everything. Not under programs (start, programs) I see the Pointui Icons (Home and Update)
How could I get rid of these Icons?
Thanks a lot guys!
find a program called CLEARTEMP
What do you guys use to download software for the Wing?
What do u mean?
There are plenty of PPC websites out there.
OK,
I downloaded it, and cleared some unused stuff. But My memory is still pretty full.
Is there a way to move some programs to the memory card without un-installing, and installing them back on.
Storage:
Total: 39.44 MB
In Use: 38.02 MB
Free: 1.42 MB
Program:
Total: 43.87 MB
In Use: 35.61 MB
Free: 8.26 MB
Flash to a different ROM with lots of Storage.
That should give you atleast a good result.
If you are using the Stock ROM flashing a new one will give you a lot more space and speed
Also you can try moving some programs to the storage card, set your pictures/videos to be saved on Storage Card and maybe change your PagePool to free up a bit more Program Memory
You can use a program called Pocket Mechanic to relocate programs from the main memory to the storage card.
If you are still using the stock rom, I would definitely suggest you flash a new one... you'll be amazed at the different in speed, storage, stability ..etc..
What memory do yopu want to clean up? The storage or program memory?
To clear the storage memory use cleartemp and oxios hibernate. Google for both, cuz you can download the as freeware. Select in the various applications (camera/rsshub/mail) your SD-card as default storage.
To clear the program memory use Pochet Mechanic (trialversion) to move the programdirectory to your sd card or reinstall your programma's to your sd-card
duprade said:
You can use a program called Pocket Mechanic to relocate programs from the main memory to the storage card.
Click to expand...
Click to collapse
RE: Pocket Mechanic....
Do you guys happen to know if you can relocation programs from main memory to the storage card that were installed in main memory originally by the ROM? I'm guessing no, but worth asking....
Dear all
I just install new WM6 from Explode (Thank very much Expload!!!) but i have a problem with memory pls see detail below.
In the memory page on my blue angle show
Storage: Total 42 Inuse 32 Free 10
Program Total 109 Inuse 33 Free 76
i can use only 42Mb (Storage) This are a few application for 42Mb, i can't use 76Mb remain(Program)
When i install software to PPC windows was show like this
Choose a location to install XXXX:
* Device
* Storage Card
There're no program location(76Mb) i can choose, How can i install program in 76Mb(Program) need your help
stoykof said:
Dear all
I just install new WM6 from Explode (Thank very much Expload!!!) but i have a problem with memory pls see detail below.
In the memory page on my blue angle show
Storage: Total 42 Inuse 32 Free 10
Program Total 109 Inuse 33 Free 76
i can use only 42Mb (Storage) This are a few application for 42Mb, i can't use 76Mb remain(Program)
When i install software to PPC windows was show like this
Choose a location to install XXXX:
* Device
* Storage Card
There're no program location(76Mb) i can choose, How can i install program in 76Mb(Program) need your help
Click to expand...
Click to collapse
Once again here is the information:
Storage Memory is physical memory that applications are stored (same as a hard drive in your computer)
Program Memory is the memory where the application is run (same as RAM in your computer)
The reason you cannot install to Program is the simple fact that it is NOT a storage location and that is why it is not listed in your install options.
Ok i see
Thank i understand now.....