This message contains all postings in this thread
dated before January 19th 2003
Subject: orange gprs xda
From: jacko
Date: 10 Jan, 2003 15:53:03
any one got gprs working through orange on their xda or know how
to get gprs working.
Subject: what version/country?
From: bigmac
Date: 10 Jan, 2003 15:58:03
Please let us know in what country you got an orange xda, and
what wince and gsm version numbers you have (and what language
your wince is in). Some older gsm roms didn't support gprs
always on.
Subject: gprs
From: jacko
Date: 10 Jan, 2003 16:49:27
just spoke to orange and they r saying no way. my xda was on o2
but had it unlocked to orange I am using ppc 2002 rom version
3.14.13 eng
Subject: gprs
From: jacko
Date: 10 Jan, 2003 16:54:07
and it was 02 uk version - I personally dont think it is
possible because orange wont activate gprs on handsets that dont
belong to them. but does anyone know of a service provider you
can subscribe to who will charge you per minute usage
Subject: GPRS
From: Purky1971
Date: 10 Jan, 2003 17:54:09
Just adding my comment
I brought my O2 XDA in Singpore (running 3.14.17 ENG) over New
Year whilst on Honeymoon. They told me it would work on any
network in the UK.
I hadn't done to much research on this anf took the retailers
advise as read!
Anyway back here in the UK I pluged in my Vodafoen SIM, gave
Vodafone a call told them Santa Claus brought me a PDA (didn't
say XDA!!!) and asked if they could be so kind to open GPRS
on my SIM, they did this and I'm was up and working. I'm on
there GPRS1 tarif which is £7.49 for 1Mbo then £0.00.5p (half a
penny) per KBo there after (£5.00Mbo)
I am having problems with GPRS 'always on' but as my SIM card is
2 years old I'm waiting on a new SIM from Vodafone which again
they were happy to supply.
I think XDA is a dirty to Vodafone, Orange etc as they don't
sell they, I have heard that O2 have lost the exclusive rights
with HTC so maybe other providers will offer them
Rgds
Mark
Subject: Orange France
From: olivier
Date: 10 Jan, 2003 18:38:49
Hi,
I am french, an i use gprs without any problem.
Is very easy to configure Wap/GPRS or PDA/GPRS.
wap gprs
user : wap.orange.fr
pass : orange
domaine range.fr
proxy : 192.168.10.100 port 9201
socks5 : login orange pass orange
apn : orange
gprs keep on suspend mode
gprs authentification pap
dns 1 : 194.51.3.56
dns 2 : 194.51.3.76
The speed in gprs/wap was up to 71Kbit/s (GprsMonitor)
ROM Version 3.12.07 ENG
ROM 08/13/02
Radio Version 4.06
Protocol Version 32S54
If you need a french user, translator, or beta tester.
Regards
[email protected] :wink:
Subject: gprs
From: jacko
Date: 10 Jan, 2003 21:12:57
I personally think someone or company should set up a pay as you
go gprs service. ie you pay a different company than your phone
company for the gprs service. the plus points could be a cheaper
and more dedicated service and it helps all those people with
pda's and phones which are not exclusive to our vendor.
does anyone know about such a service
GPRS Vodafone @ The Netherlands
Trying to use gprs on my XDA ass well.
These are the settings I got from my providor:
VODAFONE GPRS THE NETHERLANDS:
Phonenumber: *99#
user: vodafone
pass: vodafone
domaine: vodafone.nl
proxy:
socks5:
apn: web.vodafone.nl
gprs keep on suspend mode
gprs authentification pap
dns 1 : provided by server
dns 2 : provided by server
ip: provided by server
ad commannd code: +CGDCONT=1,"IP","web.vodafone.nl"
VODAFONE WAP THE NETHERLANDS:
WAP gateway: 192.168.251.150
domain: mmm.vizzavi.nl
port: 9201
time: 120 - 150 sec.
tried everything, but do not get connected!!!
Provider "Vodafone" told me they also didn't get it to work on a XDA
I've got a unlocked XDA wusing a vodafone SIM (this is working well)
and these ar the specs of my XDA:
ARM SA1110
wallaby bootloader 5.11
Can anybody help me??
Hi All
Sitting here with my 64mB XDA trying to unlock it.
Manipulator seems not to work. If I use it I get error in all fields.
Going into bootloader and using Hyperterminal I can get communication OK .... see the following...
******************************************************
InitDebugSerial using SERIAL PORT 2
******************************************************
HTC Bootloader for [Wallaby] Version:5.15
Copyright (c) 1998-2001 High Tech Computer Corporation
Built at: Jun 6 2002 20:29:17
CPU speed = 206 MHz
DRAM speed = 103 MHz
Hardware platform = 2; (0VT, 1re-PV, 2V, 3anasonic LCD, 4:Reserved)
Get resp timeout err, status is 42
Receive Response error, cmd = 41, arg = FFC000
comd1 No Response
Block size = 512 BYTES
Total blocks in Card: 488320 = 244160k bytes
No legal identify flag in SD Card
Wait for turn on GSM...
GSM Turn on time = 1868 ms
FW 0:12:19>dualser
Wait for turn on GSM...
GSM already on -> RESET !!
GSM turn on successed!!
GSM RESET...
AT-Command Interpreter ready
Screen on XDA is sitting there with GSM turn ON success.
SO dualser is sending the XDA into AT mode OK. However if I type in the AT%UREG?3FE00C,4 command the XDA simply returns ERROR.
What am I doing wrong???
HELP!!!
Not sure what the problem is. Try running The Manipulator and see if it unlocks it.
Hi
I have tried the Manipulator several times.
The phone goes from Walalby to GSM sucess OK.
The phone 'clicks' a couple of times.
The Manipulator screen shows:
Status : Reading data from phone
SID ERROR
GID ERROR
No IMEI
timer <non-zero>
and thats it - nothing more can be done.
I have tried the software on three different computers and the same result.
Running ROM 3.14.13 ENG
Radio 4.20
Protocol version 32S54
Phone is only a few weeks old and is 64Mb version.
Everything else works fine on it. IMEI number shows on device information. Radio turns on and asks for SIM unlock code OK.
Running Tom Tom Nav2, Fonix etc on it and all 100%.
If I use Hyperterminal then you get the results as above. If you type ? rather than dualser then the list of commands comes back as it should do.
Really Wierd.
Any thoughts as to what I can try next???
Rog
Just an afterthought...
Could it be to do with Radio 4.20???
Has anyone unlocked an XDA yet with this version of Radio??? Could they have altered the access to the SID in some way with this release??
Rog
Soory to be a pain here but has anyone ANY ideas as to what to do from here???
(If I use an O2 card then the phone is fine so its not a hardware fault).
Have none of you XDA-Developer guys a clue or advice on this??
Rog
4.20
http://xda-developers.com/phpBB/viewtopic.php?t=896
Re: 4.20
apart from the machine are there any programs specific to the xda?
_____________________________________________________________
Unlock your phone
Entertainers
watch footie for free
Cheap mp3s
Get back on ebay
Money reading emails
Male entertainers
Improve your golf score in 2 weeks
dagaul, your advertising links are not welcome as far as I am concerned. The admins of this board keep it ad free and you come along with a whole bunch of then in your signature. It doesnt affect me directly but this board isnt here to carry your money making advertisements, why dont you set up a website yourself for that purpose?
Rant over. :evil: :evil: :evil: :shock: :shock: :roll: :roll:
Pocket PC phone edition device made by HTC from Taiwan. Also known as O2 XDA, T-Mobile MDA, Siemens SX-56, Qtek 1010 and a few lesser known brand names.
PocketPC, 320x240 pixel screen at 4096 colors. StrongARM processor at 200 MHz, 32 or 64 MB RAM, 32 MB ROM
The model number (printed on the back) is PW10, followed by an 'A' for the 900/1800 version, and a 'B' for the 900/1900 version. Then there's a digit which is usually '1', except for the T-Mobile MDA.
Currently no longer in production, this phone has been superseded by the Himalaya.
Hello,
I don't know exactly what authentification mode (PAP or CHAP) and class 8 / 10 change on my gprs connexion ?
I have a M1000 (xdaII clone) with version radio 1.17.00
I use the Orange network in France.
I try all permutations, and it work but i see nothing different in speed, ...
It seems that my GPRS is slowest than a friend with a P900 :-/
pocket IE problems, pda problems or orange problems ?
Normaly the class 10 is faster than the class 8, isn't it ?
thanks for your help !
Garou
PS : ans sorry for my poor english
Hi,
iam using a QTEK 9100 device (german version). At every official QTEK Website they made a statement, that the device supports the fast WLAN G standard.
I tried it at once as soon as i got my device. Unfortunately it can only connect to b Standard. What a pitty. Why do they state wrong informations at QTEK websites?
Does anyone made the same experiences?
Do you know, where i can get a ROM Update from QTEK?
At the german webpage http://www.myqtek.com/germany/home.aspx i dont get support at all: As soon as i want to register there and type the imei number in, i get: "This device is not a supported one from Brightpoint".
Who may i contact in case of any problems or questions to the product?
Hello,
the last 4 days i have tried the german roms from xda, mda, qtek and vpa, all four versions make only 802.11b
The english roms here on ftp from qtek and imate make 802.11g,
i try this and it works.
regards
greddy said:
Hello,
the last 4 days i have tried the german roms from xda, mda, qtek and vpa, all four versions make only 802.11b
The english roms here on ftp from qtek and imate make 802.11g,
i try this and it works.
regards
Click to expand...
Click to collapse
Don't forget to mention that it works only with the speed of 802.11b en not on 802.11g....!
The only plus is you can connect to 802.11g router but it is still 11 Mps and NOT 54 Mps like 802.11g....!
I dont understand. Does it now the g standard inclusive the 54 MB/s speed or does it only connect to g-only routers and drives a lower speed
you do not notice differentiated, simply only a hype with this 802.11g feature, nobody needs this.
regards
I agree, it is mostly hype, as even if your internet connection was faster than 11Mbs PIE wouldn't be able to render pages fast enough to keep up. On transfering files, I don't believe that the memory setup of the 9100 would be able to write files 'much' faster either.
The only time when it is important is for the rare situations when someone might have a wireless router setup for G connections only
A lot of wlan routers which i have contact with, are configured in g only mode. What a pity. All routers have to be reconfigured...
or flash your device with english rom :lol: :lol: :lol:
marsonist said:
I agree, it is mostly hype, as even if your internet connection was faster than 11Mbs PIE wouldn't be able to render pages fast enough to keep up. On transfering files, I don't believe that the memory setup of the 9100 would be able to write files 'much' faster either.
The only time when it is important is for the rare situations when someone might have a wireless router setup for G connections only
Click to expand...
Click to collapse
:WHS: I have a 100mb to my PC here ( LAN ) and with my cabling I could have a Gb - but... would it make make diffrence if I did ? No - unless your shiffting GB files I see no need... and the same goes for B & G.... ( and how many GB files will you process on your Wizard.
Terran
PS - At least in the UK I have 2Mb Broad band how ever even if I went up to 8Mb the up stream will still always be 256k... not sure about ADSL2 & 2+ TBH
Hello
Thank you for all these informations but :
I have my qtek with Windows in French, if i use the ROM ENG to be able to connect on g router with my QTEK, my os will stay in french or will become in english?
Let me know
Regards
If you use an english ROM, the OS will be in english too
Hi,
In order to establish 802.11G connection you need to select it in your router/PC's settings (G-mode) and choose maximum performance in your Wizard. The speed is indeed boosts when you try to access network shares
Only wondering why I can read on my english Qtek box WLAN 802.11 b? The white boxlabel says "Qtek 9100 PDA phone-WWE".
Einstein said:
Only wondering why I can read on my english Qtek box WLAN 802.11 b? The white boxlabel says "Qtek 9100 PDA phone-WWE".
Click to expand...
Click to collapse
I have the same typo on my qtek9100 box ;-) But once connected in 802.11g I was really happy ;-)))
802.11g does make sense!
I agree that on the Wizard the 802.11g may not have visible effects if you're the only user on your AP/Router.
However, having 54Mbps (really 25Mbps) instead of 11Mbps (really 6Mbps) does make a difference if you start having multiple devices with a need for bandwidth. Typical use is for VoIP: you can support more clients on a single AP.
Again, not very useful for a single casual user, but in the enterprise market, it DOES make sense...
That being said, it's all screwed up if you have .11b devices attached as well cause you'll end up with the protection bit set and that has a serious impact on the bandwidth...
Typically, if you use Skype on your Wizard, amd you stream DVD over your WLAN at home as I do, you're plenty happy that all your devices support .11g.
I'd love a wizard with 802.11b+802.11a and CCX support...
Cheers,
Hal.
Nevertheless: Has anybody an answer of the other original question:
Where do i get a new ROM from QTEK. Has anybody ever done a ROM Update with an official QTEK ROM with any device?
QTEK ROM's
Yes, I would also like to know this. I have seen on the FTP that there is a QTEK ROM. Where did it come from? I have a Spanish ROM installed in my QTEK and wanted a copy of the ROM so I can go back to it after I experiment with my Universal but I don't know where to get it? Does anyone know where to get the QTEK ROMs be it English, SPanis, German?
Jorge
+1 vote of interest!
Add me as well
Hi there,
I tried to get any feedback from Myqtek as well for my German Qtek 9100, but I receive the same error message, saying: Wrong IMEI Number, Brightpoint will not support this product, please contact you dealer for support. :?
This is very disappointing from Qtek, and maybeI will sent this one back and change either to T-Mobiles Version or to Imate.
It is a shame :evil: that there is not even a support section within Qtek, but funny enough under qtek.gr (the Greece Website), there you find firmware updates etc. :?
*'?12§$!
Greetings
Oliver
Heijdemann said:
Don't forget to mention that it works only with the speed of 802.11b en not on 802.11g....!
The only plus is you can connect to 802.11g router but it is still 11 Mps and NOT 54 Mps like 802.11g....!
Click to expand...
Click to collapse
My Qtek Wizard establishes connections up to the full 54 MBit/s (usually @18 Mbit/s, depending on radio quality and power saving settings).
Regarding the German Qtek support, I'm kind of appalled, too!
Any IMEI is being denied while trying to send a support inquiry.
On the first phone number given on their website (+49 (0) 28 22 / 98 10 - 200) no one answers.
On the second phone number (+49 (0) 28 22 / 98 10 - 100) a fax answers.
They don't even habe a real support section on their website, except for a simple mail form, that won't accept our IMEIs, when sending.
What kind of dilettantes are these guys, distributing high-tech products without any support!?