Can anyone else confirm this fault with POCKETVCS (Atari 2600 emulator for PocketPC)
Had this on my himalaya running 100% perfect (Great blast from the past) HOWEVER, on my univeral the program starts fine, all options work but when you load a rom and start playing the screen goes all to hell, the game looks fine but you can't tap any of the buttons as they are stretched all to hell.....
Dunno if this can be fixed if it a problem with the vga screen on teh exec..... can someone else try and see.
Link is http://pocketvcs.emuunlim.com/
Has NEone tried this, can it be easily fixed, hacked or do we have to wait for vga aware version being released
Related
Hi!
Newly released, here:-
http://www.pocketgear.com/software_detail.asp?id=7325
Anybody tested with their Universal? How's the stability? Can the Universal be overclock beyond 624MHz?
Thanks
won't even go to 624 on my jasjar
maybe cos its a trial...
regards
initial installation working fine. the next morning, the whole screen when into flickering. even putting it into prevent flickering filter mode also don't work.
RE
rahjinoh,
Earlier version v2.91 also exhibited similar flickering problem with my set. I thought this latest release, v2.92, should have the problem solved?
Thanks
Nope it does'nt..min still flicker..for a moment there I thought my display faulty
RE
Yah, flickering and system hangs
Apparently, after switching off everything (ie. wireless connection and power off) and re-power on flickering starts and my system hangs
On one occasion of soft reset my system hangs. On another soft reset the system was working fine but flickering started again and my system hangs after less than 5 min of use.
WELL, THIS VERSION IS OFF MY SYSTEM!!! :evil:
Still not working
2.92 like 2.91
still not compatible
Looking on their forums, it looks like 2.93 will be the one to look out for, for us Universal owners.....
sub69 said:
Looking on their forums, it looks like 2.93 will be the one to look out for, for us Universal owners.....
Click to expand...
Click to collapse
Let's hope so...
I was about to post about this too.. I installed the trial and boom, my dopod had this white screen and flickering lines of green and pink (I guess from my wallpaper)... I couldnt distinguish which is whiter, the paleness of my face or my phone. Haha.. I quickly reset and uninstalled. The end. Will never try anything so scary again..
cuteangelika said:
I was about to post about this too.. I installed the trial and boom, my dopod had this white screen and flickering lines of green and pink (I guess from my wallpaper)... I couldnt distinguish which is whiter, the paleness of my face or my phone. Haha.. I quickly reset and uninstalled. The end. Will never try anything so scary again..
Click to expand...
Click to collapse
LOL... I loved your vivid description cuteangelika...
I believe that version 2.93 is for us though...
I just wanted to open this topic up. I've been having problems running tomtom:
It seems that the buttons (including the joystick) stop responding. The only workaround i've found for it tapping the power button (or home button and clicking on tomtopm icon again). This makes jumps back to tomtom but activated the buttons for a few seconds...then nothing until the process is repeated the process.
I am followed the instructions in the "WM6 ROM for Typhoon(Rom Ready For Download)" thread heading. I am using sp3i smartphone.
thanks for any input.
Interesting notice and I'm not sure what to make of it.
I installed Pocket Controller-Pro 6 (for my sp3i). While running Pocket Controller-Pro on the PC it shows you what you should be seeing on the device itself (like a copy of lcd screen but its your computer). When I launch tomtom all the correct screens, prompts show up in Pocket Controller-Pro view on my pc. I can naviagate through different menus etc...
But on the phone itself the display is not changing at all (it is at wm6 home screen and stays there) I wonder if this is wm6 phone lcd resolution question...apparently tomtom is running perfectly (but for whatever reason it is not showing on the screen of the phone)
Just dug my c500 out for a change from my Vario Flashed to WM6 and mine is doing the same
possible fix
I just flashed wm6 from this link
http://forum.xda-developers.com/showthread.php?t=323668
and tomtom seems to work okay...but have not had a chance to run it too much.
i have WM6 and tomtom5 moblie on mine and its is work great with no problems
dcbrowne said:
i have WM6 and tomtom5 moblie on mine and its is work great with no problems
Click to expand...
Click to collapse
THE PROBLEM of WM6 and TomTom 5.20 on Feeler (ANDOT image I have try) is:
THE DISPLAY DON'T TURN OFF: SO TT5 WORK GOOD, but BATTERY DESCARGE VERY FAST!!!
So you can use only for a short travel!!
I have notices touch screen malfunctions when I used to overclock (don't do it anymore), but since my previous windows mobile 6.0 rom flashing (I have flashed two times after that) my touch screen works perfectly in landscape mode, and almost not at all in portrait mode. Of course if I push my stylus on the screen in portrait mode close to breaking it, it might register the tap but that's not good at all.
I currently have the WM6.1 Slim Edition 2.2b, but before that I was using TNT 6.0 and TNT 6.1 Roms. It's not a hardware problem, since the sensitivity and responsiveness in landscape are excellent.
Any ideas?
karios said:
I have notices touch screen malfunctions when I used to overclock (don't do it anymore), but since my previous windows mobile 6.0 rom flashing (I have flashed two times after that) my touch screen works perfectly in landscape mode, and almost not at all in portrait mode. Of course if I push my stylus on the screen in portrait mode close to breaking it, it might register the tap but that's not good at all.
I currently have the WM6.1 Slim Edition 2.2b, but before that I was using TNT 6.0 and TNT 6.1 Roms. It's not a hardware problem, since the sensitivity and responsiveness in landscape are excellent.
Any ideas?
Click to expand...
Click to collapse
i have same problem as i think
i have k-jam and touch screen work good at portrait mode
but not working at landspace mode !!
help me to solve it pls if it's possible
i use wm6.1 TNT
So it's not only me. I never had any problems with WM6 or WM5 though, anyone else having similar problems? Let's compare out statuses.
hi guys i too have a similar problem... i am having an HTC Touch with wm6.1 from last night onwards my screen isnt responding to any touch.. did soft resets and hard resets but nothings happening.. could u tell me wht to do ??
Could it be the case that wm6.1 is actually causing the problem? Too bad, I love WM6.1 But I may have to revert back to WM6 if I don't find any solutions to this.
i had a similar issue a long time ago. i flashed back to t-mo's latest wm5 (226 i think) and then to a new rom and it was fixed. good luck.
I can get it to run, but cant get the screen to repond. appears full screen.
an awesome game.
no one interested in this ?
http://www.freewarepocketpc.net/ppc-download-pocket-lemmings.html
It works for me, but at times it freezes the phone I think it's the freez bug more people have after tapping the screen quickly..
I use the one from www.freewareppc.com
Hey guys have used search high and low, and cant seem to find the answer to my current problem, i just recently bought a jasjam, and i love pretty much everything about it, but when the ROM was changed the owner said that the touch screen stopped working. Apparently it was fine before the change, but that it didnt work after. So i figured that it was a software issue, loaded the latest SPL, and relaoded another ROM on the pda. Now the toush screen still doesnt work, but i have noticed that you can tap the screen when asked to get to calibration screen, and tapping the screen will also turn the back light on, but i am unable to calibrate the phone touch screen after the initial tap.
i have since loaded remote screen calibrator, and skip calibrate, and the phone seen to run well, except for the touch screen, on that note i have noticed also that the touch screen will accept one tap when loaded to the today screen, then stop working, i have hard reset, soft rest, changed to latest SPL, and the latest ROM from the forum.
Could it still just be a dodgy touch screen, or does it sound like a software prob to you guys, thanx heaps for the time
Trix
Hey guys have had a look round the web, and i get the feeling that perhaps the touch screen driver is screwed and was wondering if there is a way of checking, by replacing just the touch screen driver? i have placed a number of different ROMs on the phone and none of them make any difference to the non working of the touch part.
if someone could let me know if i am wrong in my thinking please let me know
thanx heaps
peace Trix
Anyone?
thanx in advance
Trix