Hi, there I just received my XDA EXEC for UK, Im in USA.
I have Cingular Wireless(AT&T Wireless), and what I did was put the Sim card on the phone and the phone starts working, but I'm having 2 problems.
First my phone has the roaming signal all the time, I don't know if there is any way to modify that.
And the second and most important is that the phone has really low signal.
I want to know if someone can help me.
Thanks.
COPYTECHUSA.
Hard reset the phone and choose Copoorate mode (the code is 0506). This will stop the roaming issue. Other modes load O2 customisation.
I already has my phone in corporate mode and still the roaming signal.
Thanks.
COPYTECHUSA.
If in roaming then it would suggest that the phone has been setup with UK O2 as the default network. Have a look at Settings/connections perhaps you can change the defualt network to Cingular or try installating the Cingular CAB file from: http://www.howardforums.com/showthread.php?t=787912&highlight=cingular+cab
I have no idea what I'm saying here, but try to lock it onto GSM instead of WCDMA and it should be better.
Related
Hi all,
I've been a long time user of the Pocket PC Phone. I picked up an Unlocked (or so I thought) IMate II about 6 months ago and inserted my Tmobile chip in it and everything worked great.
Recently I went over to Cingular, signed up and walked away with my simm chips. Here's the problem I'm having:
1) No matter where I go, the phone has a Triangle (indicating Roaming) and it says T-Mobile in the Dialer. If I go to options, click on Preferred Networks, it has a ton of networks, the first three are Cingular and they are checked. If I click OK on this dialog, I receive the error message "Unable to save your changes to the network. Try changing settings later, or disconnect data connection and try again. Retry | Cancel.
2) My second problem is no matter what I put in for GPRS Connection it will not connect. I have tried isp.cingular (APN) and ISPDA.MYCINGULARGPRS.COM (username), cingular1 (password) and I have tried others to. One starts with WIXDC001* and that doesn't work.
I am hopeful that someone can help me here. I am unsure if these issues are related.
Thank you in advance,
Well depending on the area you are in most of Cingular's GSM towers are on 850 mhz. The xda II doesn't cover that frequency. There are a handful of states that still have 900 mhz coverage for them but not many. That's what makes you roam to T-Mobile, since they are the only provider on that frequency in your area.
looknow12 said:
Hi all,
I've been a long time user of the Pocket PC Phone. I picked up an Unlocked (or so I thought) IMate II about 6 months ago and inserted my Tmobile chip in it and everything worked great.
Recently I went over to Cingular, signed up and walked away with my simm chips. Here's the problem I'm having:
1) No matter where I go, the phone has a Triangle (indicating Roaming) and it says T-Mobile in the Dialer. If I go to options, click on Preferred Networks, it has a ton of networks, the first three are Cingular and they are checked. If I click OK on this dialog, I receive the error message "Unable to save your changes to the network. Try changing settings later, or disconnect data connection and try again. Retry | Cancel.
2) My second problem is no matter what I put in for GPRS Connection it will not connect. I have tried isp.cingular (APN) and ISPDA.MYCINGULARGPRS.COM (username), cingular1 (password) and I have tried others to. One starts with WIXDC001* and that doesn't work.
I am hopeful that someone can help me here. I am unsure if these issues are related.
Thank you in advance,
Click to expand...
Click to collapse
Thanks for the reply. I believe that's the answer.
Have had my wizard for a couple of weeks now, when I bought it, it had the O2 software running on it, its branded externally as an O2. I upgraded the ROM last night but i have noticed that the phone (as before) still thinks it is using the T-mobile network e.g. when i tap on the signal strength indicator or a message comes through, it indicates the t-mobile network. I can receive and make calls as well as text messages and voicemail on the virgin network no problem. After doing the rom update last night i indicated that i was on the Virgin network when prompted when the device was initialising.
So how do i get rid of the fact that my wizard thinks its using the t-mobile network when its actually using the Virgin network. The phone is branded externally as O2? How on earth did this t-mobile identity survive the ROM update. Note i applied the I-mate ROM.
During the ROM update i left the sd card containing the previous ROM image (O2), a backup in case things went wrong, in the device. I noticed that a little after i ran the imate rom update from my host pc a message appeared on my imate mentioning something about the fact that there was an SD card containing a rom image and if i wanted to use this. It was very late and by the time it registed with me what i was looking at the message timed out and the rom update continued. Could this explain the reocurrence of the t-mobile wording. When i reset the device the imate splash is what i see.
Currently:
ROM version 2.16.9.1 WWE
ROM date 2/6/06 (6/2/06 here in the UK)
Radio version 02.07.10
Protocol version 413.1.03
ExtROM version 2.16.9.101
Thanks for any help
Fergus
Virgin is a virtual mobile operator and uses T-mobile's network. Its common for T-Mobile to show up as the carrier on many mobile phones.
Roaming indication after upgrade
Hi have the same problem.
I have a T-mobile (US) phone; I upgraded the ROM (Qtek test ROM) and since then, the phone shows that I am roaming into Cingular network.
In my area (San Francisco) - Cingular is the actual network operator; T-mobile uses Cingular's infrastructure as part of a deal made long time ago.
So, the ROM is correct but I wish there was a way to disable the ugly triangle (showing that I'm roaming) or alternatively - let the phone know that I'm parked in a "home-network".
Ah thank you for clearing that up. By the way is it true that virgin has been bought by NTL, someone mentioned this today. Not sure who is worse NTL or Virgin UK.
Do you know where i can get the settings for MMS and GPRS, have not checked if they have been set up properly.
Many Thanks
Fergus
fergus said:
Ah thank you for clearing that up. By the way is it true that virgin has been bought by NTL, someone mentioned this today. Not sure who is worse NTL or Virgin UK.
Click to expand...
Click to collapse
it's true...
The operator logo in the dialer does not automatically change when you switch networks / sim cards.
It depends on the image file 'carrierlogo.gif' in the Windows folder.
I have an unlocked T-Mobile MDA Vario with an Orange sim card - this showed as T-Mobile until I updated the carrierlogo.gif file!
If you want to view the network you are currently connected to, go to Start | Settings | Phone | Network.
Re: Roaming indication after upgrade
gilbnx said:
Hi have the same problem.
I have a T-mobile (US) phone; I upgraded the ROM (Qtek test ROM) and since then, the phone shows that I am roaming into Cingular network.
In my area (San Francisco) - Cingular is the actual network operator; T-mobile uses Cingular's infrastructure as part of a deal made long time ago.
So, the ROM is correct but I wish there was a way to disable the ugly triangle (showing that I'm roaming) or alternatively - let the phone know that I'm parked in a "home-network".
Click to expand...
Click to collapse
Have you tried another QTek ROM? Otherwise, it's a possible SIM-related issue. The SIM hasn't received an OTA (Over the Air) update telling it that it is connected to T-Mobile's local switch. Furthermore, you shouldn't be on the shared network anymore since the old GSM 1900 shared network was sold to T-Mobile in CA and NV as part of the Cingular/AT&T merger. I would think that T-Mobile has updated that GSM 1900-only network to broadcast only their MNC (Network Code) so any T-Mobile SIMs registered on the network know that it is a native network.
Hi, I have a Cingular 8525, Hermes, but there are no options for me to manually select my network. It is unlocked and it is also bootloader 1.04 ( dunno if that matters), and I can select bands (after using the registry tweak).
What I need is to be able to manually choose what network to be on.
I've done a search and I couldn't find anything on this...
Thanks
None of my tricks work that did previously as far as unlocking this feature. On a T-Mobile SIM network select works perfectly. However, any of my Cingular sims block it.
Cingular blocked that in the US with all their recent SIMs, no way to get around it.
i dont think all of it is the sim, because i was able to enable network selection on my 8125 with my 3g branded sim and it worked fine! i think it still has something to do with the registry! I used the same reg hack on my 8525 and it would bring up the network selections, but it wouldnt let me register on the 2nd cingular selection!
Same here. My 8125 had network selection and it worked beautifully. Also, on my MPx220 I had manual network selection and it worked without a hitch. It definitely is something to do with the ROM on these phones.
Just got back from the BVI. Cingular is available on USVI (can see tower). If I used my old sim from my mpx220 in my 8525 (orange/white) w/cingular international activated, I could not choose between the providers. It would always lock on CCTwireless @ $1.50/min. It was the page that has 'find network' as the only option. If I changed to the new simI got with the 8525 (blue/white/3g) w/o cingular international, I would get the network selection page that had the additional option of 'manual' network selection plus many other options/settings. I then could select 'cingular' and use it w/o charge. It would not let me register on CCTwireless even though it was an option in the dropdown menu, maybe because I didn't have cing int activated on that sim. So the manual network selection page is available on the 8525. It appears not be a 'new sim' issue. There must be a registry hack to enable/force the manual selection page as a default. Any thoughs to do this?
Yes please someone post the reg hack for this. I reside between two towers and likewise two providers - one Cingular and one roaming - and the partner does not have a partner agreement with Cingular.
Unfortunately, the "unpartnered roaming signal" is much much stronger than Cingular's, and therefore takes precedence over Cingular every time my phone repolls the networks every few minutes.
I cannot access data at all on the partner's network. I even called the provider and got their GPRS settings. So I need to be able to manually select Cingular as my network so that I can get on their data network.
I called Cingular and told them this and said that if they would let me do this, they will save a lot of money because they have to pay a buttload anytime I make or receive calls on other towers where they don't have an agreement, which is true - they confirmed this, and they always say that manually selecting networks is not possible. I think they are lying.
I have the HTC TyTN (with the WM6 homebrewed ROM) and the Cingular 2125 (with WM5 MSFP iMate ROM) - both with no dice on changing this.
Someone please post the reg hack!!!
snoop_hardin said:
Yes please someone post the reg hack for this. I reside between two towers and likewise two providers - one Cingular and one roaming - and the partner does not have a partner agreement with Cingular.
Unfortunately, the "unpartnered roaming signal" is much much stronger than Cingular's, and therefore takes precedence over Cingular every time my phone repolls the networks every few minutes.
I cannot access data at all on the partner's network. I even called the provider and got their GPRS settings. So I need to be able to manually select Cingular as my network so that I can get on their data network.
I called Cingular and told them this and said that if they would let me do this, they will save a lot of money because they have to pay a buttload anytime I make or receive calls on other towers where they don't have an agreement, which is true - they confirmed this, and they always say that manually selecting networks is not possible. I think they are lying.
I have the HTC TyTN (with the WM6 homebrewed ROM) and the Cingular 2125 (with WM5 MSFP iMate ROM) - both with no dice on changing this.
Someone please post the reg hack!!!
Click to expand...
Click to collapse
See this thread post 7 onwards
http://forum.xda-developers.com/sho...light=cingular+enable+network+tab#post1061699
Mike
I have two Dopod 810 running on Optus network. One running windows5, the other windows6 Dopod release. BOTH phones have the same problem of repeatedly disconnecting the phone call if the phone settings are
Network …… Auto
GSM/UMTS ..Auto
So to correct the problem Optus told me to change the the settings too
Network ……GSM
GSM/UMTS ..GSM(900+1800)+UMTS(2100)
This would stop the drop out, but I now don’t have 3g network, hence no MMS, video conferencing, web access is at dialup speed.
I had the Optus service department take both phones and they found they could not replicate the problems, installed the windows 6 pro upgrade on them and sent them back. Guess what, I still have the same connection problems. Put the phone settings back to the second settings above and have a phone back, but none of the 3g.
Any ideas why and what I can do? The only thing I can think of is to get Optus to replace the sim cards and see if that helps?
Ohh and this has been a problem since the phones were new.
I have the same problem too in indonesia Telkomsel network.
a incoming and outgoing call always drop or disconnected. and really difficult to setup a call. and very often my voice couldnt be heard.
anyone can help me?this is network failure or handset failure?
thx in advance
im struggling to find information about how i can set up my orange branded HD with stock rom on any other network.
i have unlocked the phone using olipros unlocking service.
i have a 3UK sim at the moment and when i put it in it gets signal, i can make and receive calls but cant get internet which is the main thing i want to use this network for, i havent yet tried text and dont use mms.
i get a notification telling me network settings are not in the database and i have no idea what the settings for this network are and cant find them on three.co.uk and the setup wizard on there does not support my phone.
i would rather not change the stock rom as theres too many to choose from and i dont se the phone for much anyhow. If theres a rom that has all the settings already for most uk networks then i may consider it.
any advice would be helpfull as at the moment its useless having an unlocked phone as im still stck with orange and the rubbish signal and only 3g speeds in my area.