Hi ,
I can't enable or disable the password in my K-JAM!! when i go to settings and i click on Password icon, i get nothing....
when i sync i get a message that i must enter the password (which is the same password i used for the first time when i bought the device)... but when i turn off the device and then turn it on, the device never ask me for a password..
any help will be appreciated...
-----------------------------------------------------
OK i did a hard reset and everything went back to normal
Related
Hi, I am looking for some help with my Nexus S.
I recently rebooted and changed to a new SIM, and upon booting I am presented with a screen saying "Enter password to unlock", My gmail password wont work and I don't know what password it means.
So i then put my old SIM back, and it still happens! now I cant get into my phone at all, and cant use it!
I even tried a reset, and when I select recovery in the bootloader, it doesn't work.
I do have Prey installed (http://preyproject.com/), and I did forget to switch it off before changing SIMs, but I entered my prey password and that didn't work either.
Please help!
Thanks in advance,
Tris
Ok i have solved this.
It was Prey that had locked my phone, and I had got the password wrong!
At least it shows it will make it really difficult for anyone who steals my phone!!
So I've been trying to back up my phone's data before rooting...I've tried several method which are all doing the same thing. What happens is when I get prompted to enter the password, I enter it, press Back Up My Data, and the window dissappears and goes back to the app that was open before. I don't get any error message to tell me my password is wrong, but I have a feeling that's the problem. Is there any way of changing the password or fixing the issue I talked about above?
Thanks.
I bought a Samsung Galaxy S3 Neo i9301i from Italy without any service offer. But i use it in Bangladesh. When i tried to use that phone here it say's to give a pin code for network lock. I went to nearest local service center and they unlock the phone in some way but i can't use my Swipe, Pattern lock . I can only use password. It is very painful giving password every time. Here is a screenshot of my lock screen. Can anyone help me about this matter?
Hmm seems that your device is encrypted.. dont know why it disabled features for you.. i suggest wiping data/ factory reset over recovery mode ( vol up + home + power ) to see if it will help. Note that this will remove everythign from your phone so backup important data
Maybe because in Italy is Locked,but i don't think that has to do...
Horrible english but i'm italian
sulaimansust said:
I bought a Samsung Galaxy S3 Neo i9301i from Italy without any service offer. But i use it in Bangladesh. When i tried to use that phone here it say's to give a pin code for network lock. I went to nearest local service center and they unlock the phone in some way but i can't use my Swipe, Pattern lock . I can only use password. It is very painful giving password every time. Here is a screenshot of my lock screen. Can anyone help me about this matter?
Click to expand...
Click to collapse
Go to LOCK SCREEN and change to swipe or what ever you whant? Than write the password you already have signed and done. I make the same and its working for me.
(sorry for my english)
Scarfangs said:
Go to LOCK SCREEN and change to swipe or what ever you whant? Than write the password you already have signed and done. I make the same and its working for me.
(sorry for my english)
Click to expand...
Click to collapse
I have already tried that too. It say's Pattern lock, swipe and other's lock system are disabled by administrators, credential manage or encryption policy. Please see my uploaded image
sulaimansust said:
I have already tried that too. It say's Pattern lock, swipe and other's lock system are disabled by administrators, credential manage or encryption policy. Please see my uploaded image
Click to expand...
Click to collapse
But from where you enter there from Security or Lockscreen?
Rox said:
Hmm seems that your device is encrypted.. dont know why it disabled features for you.. i suggest wiping data/ factory reset over recovery mode ( vol up + home + power ) to see if it will help. Note that this will remove everythign from your phone so backup important data
Click to expand...
Click to collapse
Thanks for your reply. Yes, I had encrypted my phone. Do you know anything about if i do factory reset/wiping data, will it show again a network lock? If it become network lock again it will cost me about 20$
sulaimansust said:
Thanks for your reply. Yes, I had encrypted my phone. Do you know anything about if i do factory reset/wiping data, will it show again a network lock? If it become network lock again it will cost me about 20$
Click to expand...
Click to collapse
I encrypt my phone 2 h ago and now is normal.
Scarfangs said:
But from where you enter there from Security or Lockscreen?
Click to expand...
Click to collapse
From lock screen . these are the image when i enter to lock screen. First image is when i try to enter in lock screen[it want password] . And second one is when i have entered there
sulaimansust said:
From lock screen . these are the image when i enter to lock screen. First image is when i try to enter in lock screen[it want password] . And second one is when i have entered there
Click to expand...
Click to collapse
Strange i just encrypt but when i go to lock screen i enter the password and now i normal i dont know what will happen after charge or reboot.
And dont be nervous i try to help your choice did you will accept.
(sorry for mistakes and for my english)
Well, if factory reset does not solve your problem, the alternative that I can think of is to use ODIN to flash stock firmware.
Thanks all for reply. I just solved the problem. It was happening for encrypting my device. After decrypting my device the problem is solved
Hi! As the title says, I somehow can't use that option.
I had fingerprint scanning for a while but got tired of it so wanted to go back to just swiping but that option is not clickable. I have tried switching to other password methods and that works just fine and I also deleted my fingerprint. But it still doesn't work to use the just swipe option... Any solution? Except factory reset.
Hamstern said:
Hi! As the title says, I somehow can't use that option.
I had fingerprint scanning for a while but got tired of it so wanted to go back to just swiping but that option is not clickable. I have tried switching to other password methods and that works just fine and I also deleted my fingerprint. But it still doesn't work to use the just swipe option... Any solution? Except factory reset.
Click to expand...
Click to collapse
Hi,
It could be that you have a device administrator active (Google Device Manger) that requires the screen to be locked by PIN or password. To check and disable it go to Settings> Advanced settings> Security> Device administrators.
Cheers
I tried that now when you answered, but disabling that feature didn't help either..
This option is locked in kernel by Huawei because of encryption policy or credential storage.
alexpurcaru said:
This option is locked in kernel by Huawei because of encryption policy or credential storage.
Click to expand...
Click to collapse
What does that mean? And is there a way to bypass that?
Hamstern said:
What does that mean? And is there a way to bypass that?
Click to expand...
Click to collapse
It mean, that Huawei try to mentain the security of device. Maybe if you root the phone you can get full acces. You saw if you reset the phone, at start up it's required to insert the pin code. I will analyse this situation.
i have the same problem, the only way to disable the lockscreen code is by skipping it during first setup after resetting the phone
It's possible with a little workaround. Change screenlock to pattern and make a recovery pin -> Turn screen off and on -> Input wrong pattern 5 times -> Wait for the 60 second countdown and press use pin in bottom right corner -> Use your recovery pin to unlock phone and then press home button. That's it.
I contacted Huawei customer service. They told me if I have used encryption before even if you removed it the only way to turn swipe to unlock lockscreen again is to backup your data and factory reset.
hey guys whenever i restart the phone it asks for pin or the password i setup and than only it will start the phone, why
is this normal, how to fix this
That's normal.... You'll always have to provide password or pin for the first time after phone reboots. Unless you select none for your lockscreen unlock method
My phone in the beginning asked every time I restarted but now it doesn't ask for anything. Is something wrong?
z1_nile said:
My phone in the beginning asked every time I restarted but now it doesn't ask for anything. Is something wrong?
Click to expand...
Click to collapse
There's two levels of lock. One is the lock before android starts and second one after boot is finished.
If your phone isn't asking for an unlock password/pin it's possible you may have disabled it. You can enable the lock before device starts by going through the same process as normal but checking Yes when it asks the question. See my attached image for how the screen looks. If you select No you can apply a regular after boot lock.
asn0304 said:
There's two levels of lock. One is the lock before android starts and second one after boot is finished.
If your phone isn't asking for an unlock password/pin it's possible you may have disabled it. You can enable the lock before device starts by going through the same process as normal but checking Yes when it asks the question. See my attached image for how the screen looks. If you select No you can apply a regular after boot lock.
Click to expand...
Click to collapse
Figured it out just after posting. But thanks a lot for helping.
Change secure start up settings
Is there a way to change secure start up settings aside from reset factory settings? Thanks in advance