I'm using an XDA2i with WM2003SE, though I thought that this would also be a poignant issue for those with XDA2's etc.
I have my device set so that when I press the power button it is effectively a keylock. The screen goes blank and doesn't respond to any input, neither do the buttons. This is a normal setting, not an external program or whatever.
However, when I receive a message or a call, the screen/buttonlock comes off allowing all manner of things to happen whilst the device is in my pocket. I must say this is particularly annoying when I have it on silent mode...
What I was wondering is if there's a way I can stop it doing this? I have found myself connected to MSN, launching applications, and various other things that have cost me time and money just because the screen/buttonlock won't stay on when I have someone contact me in any way.
So, can I prevent this happening at all?
Thanks.
earlier such was?
What?
EXACTLY the same problem
yeah i have a similar problem im looking for some software that means it wont unlock unless i press power
because im pulling my hair out over this one
does any one know of some work around?
flightmode is the only thing i can think
off
doubt there would be a big demand for that feature
anyway
as a rule people want to be notifided that their device is ringing
and want to be able to answer the call
by pressing the pickup button
one can put a password on the device if one dont wish it to
go to today screen when it wakes up ringing
oh yes i want to know its happening its just i don't want it to answer and dial 3 other people before it reaches the top of my pocket
other phones dont unlock them selves when they recieve texts
its just if i don't feel it vibrate it doesn't stay locked or lock after the ringer gives up it then remains unlocked and free to do what the pockets desire
as i said having a password on the device
is a workaround
it's also a way to keep private data safe if it's stolen
yeah fair enough i just tried that and it doesn't ask for the password once it wakes up, Oh and i certainly appreciate the help rudegar
i have been eyeing up devicelock thats on some threads but that wont install on my blueangel
what we need is, the device not to unlock because of a txt or message, and to relock after a call disconnect
that seams to be the only annoying thing about this phone other wise its great and i love the still active communities
alright i may have found soemthing
http://www.modaco.com/Key-screen-lock-PPC-t204979.html&st=60
they were developing this program due to them being equally frustrated
the guy pocketmax came up with a program called screenguard i will be testing it over the next few days
and tonight ill let you know how it goes
odd i have my password timeout at 0
and sure i can asnwer a call without putting in the password
but it never leave the password screen
and i can see the clock and sms noti icon and such
but i can never get passed the password screen
of cause the password would be useless for data proction if that was not the case
Related
I use my 8525 in a side case and when the phone rings I usually pull out the phone to see who's calling to decide if i want to answer... though 9 out of 10 times i accidentally hit the answer button. I always lock my phone via device lock on today screen... is there a reg hack or setting which will allow me to disable or customize ALL the buttons (when in lock mode) on the 8525 so I don't accidentally answer. to me if i were to assign a button (ie power or ptt) to only be allowed to accept a call (when the phone is in lock mode) that'd be great. I'm tired of auto answering and what good does a device lock do if you can easily auto answer?
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
abricko said:
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
Click to expand...
Click to collapse
Sorry you're not getting replies and I have no solution of the type you are looking for sadly. I've tried to replicate what you say happens but it's not easy!!! My key is not that easily pressed and I always put the device back with screen towards my body - my fingers don't seem to get very close to the green button.
This is probably daft to suggest but have you checked the setting that lets you specify auto answer within X number of rings - just in case it's answering the call by itself!!. (apologies if you checked this setting already!!)
Mike
This may do what you want...
http://www.pocketmax.net/smf/index.php?PHPSESSID=da5459e6aadc9c38d5a74b0276782091&board=19.0
Auto Answer is not set... the problem is (and it's a problem with the phone design) when the phone is locked none of the buttons respond until you hit the power button and then unlock the phone via the screen (which is good).
However when there is an incoming call or reminder the screen turns on and then a few buttons are active on the phone (send, end and the two soft keys seem to be). So when a phone call comes in, if the phone is in your pocket or the hip case while reaching for the phone it's VERY easy to accidentally press any of the active buttons and then accidentally accept or reject that call.
I've searched everywhere I can think of and I find little mention of this problem and no mention of a fix, most screen lock replacements only do as much locking as the WM5 built in lock does. The button re-activation after an incoming call is probably something built into the hardware. That's all I can deduce from this.
Thanks for the responses I've received so far.
I am on my fourth PDA phone and have used both Win Mobile 2003 and WM5. They all behaved this way and it is one of my biggest complaints with the Windows OS. I have seen apps for Palm that solve the problem. How hard could it be to have the option to only wake with the press of the power button?!
not hard at all, but the again its M$, i am surprised these devices to have ctrl-alt-del keys.
When my device P3600 received call or sms, the device is powered up, and then all the keys are active. If the device in case some key can be press (by mistake) and activate a program on this situation.
Does any one have a solution for that?
Use the Device Lock Feature in your Today Screen.
I do not like to add one more line to the dotay screen
can I use it without add it to the dotay screen?
If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").
anonimo said:
If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").
Click to expand...
Click to collapse
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.
Carmi said:
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.
Click to expand...
Click to collapse
Yes you can answer a call, the device lock only lets you use the power, answer, and hangup buttons. When the call is finished it is still locked, unless you unlock it.
I use this one. http://www.mr2-power.com/downloads/DeviceLock.CAB
10x, GREAT, this will do the job
it is work fine - 10x
Carmi said:
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms
Click to expand...
Click to collapse
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.
anonimo said:
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.
Click to expand...
Click to collapse
Your solution works too, the only thing is sometimes (for example) I'm sitting on the couch using my phone for email or surfing and watching a TV program. I stop to watch something interesting for 3 minutes and my phone has locked itself with the pin lock. I have to enter the code each time this happens. It can get annoying. If I use devicelock, I lock the keys when I need to, obviously when I'm at home and my phone is on the coffee table, it doesn't need to be locked. I set my device pin lock at 2 hours, that should give the phone enough time to lock itself if I loose it...hopefully.
yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.
dersvenni said:
yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.
Click to expand...
Click to collapse
Yes, very true, but at least they won't be able to see all my contacts, appointments, notes etc. That being said, I always use FlexWallet to encrypt all sensitive information which is synchronized to my laptop.
touch screen and buttons can be locked during a call?
I followed up this thread and found it very interesting. But it does't focus all the problem:
when call's come in, your solutions are ok.
But when I want to make a call, I found there is a nasty *****, clicking to call waiting or to head speaker on, opening a note or calling my voice box etc. etc.
Then I found that it was my ear or my fingers, clicking on the touch screen or my fingers clicking hardbuttons.
I think tat during a call on the normal speaker the only buttons to be active should be "hang on" and "loud speaker on". With loudspeaker or BT on, or call terminated,s screen and buttons should come back to full function.
Anybody knows a solution to this?
Regards, and keep on, its a great forum. i love it.
iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
Hmm this is just "device lock" that we can see in HTCplugin. In my case it does not turn off the screen. It just locks my device. Is everyone has "turn off the sreen" functionality?
> Karl der Käfer wrote:
>
> touch screen and buttons can be locked during a call?
I lastly tried the on-off button to block screen during outgoing calls.
I never did this before because I thought it would cancel the active call, but it doesn't.
Ok, I see it's more or less doing what I want. But it's very unconfortable. When I hit it bad, or don't hit it at all, or forget to press it?
Isn't there a posibility to have the screnn sensibility off, only sensibility, until the call is either ended, passed to outer speaker, headset or BT? or perhaps simply until I give it free manually?
It would improve safe usage of that phone remarkably, I think.
If not :-( , well, I allways can press the button ;-)
curious for what solutions you'll find on your problems with incoming calls. Perhaps that will give me an Idea.
Chears
I've complained about this on just about every major forum I have found. Hopefully, someone will eventually write an app to allow personalized device locking. I would set my trinity to not wake for ANYTHING and have ONLY the power button active. I would prefer to get audible alerts (or vibrate) to incoming calls, alarms and messages. Pressing power would be the only way to turn the device on. PIN features only annoy me. This would be very useful anytime I am not willing to immediately respond to a notification - driving, having dinner, in a meeting, etc. It could significantly improve battery life. I store mine in my pocket and accidental button press is a problem as well.
Since I've had slide 2 unlock installed since day 1, I'm not sure if its that, the Mogul, or Sprint, but everytime I get a call, the phone turns on, shows me the locked screen and waits a good 2-3 seconds before the ringer starts and then a split second later the ID.
It seems like if it were slide 2 unlock somebody else would have had mentioned the problem there. It could also me being thick and this is just an extension of the common problem where the caller gets like 3 rings in b4 we get a ring(I have done that "hack" but don't believe it does anything.)
Kind of annoying when I see it light up, know I'm getting a call but can't answer or see who it is. Anybody know how to fix it, or at least give me an explanation so I at least have some sort of answer for people asking me wtf my phone is doing.
gernerpsu said:
Since I've had slide 2 unlock installed since day 1, I'm not sure if its that, the Mogul, or Sprint, but everytime I get a call, the phone turns on, shows me the locked screen and waits a good 2-3 seconds before the ringer starts and then a split second later the ID.
It seems like if it were slide 2 unlock somebody else would have had mentioned the problem there. It could also me being thick and this is just an extension of the common problem where the caller gets like 3 rings in b4 we get a ring(I have done that "hack" but don't believe it does anything.)
Kind of annoying when I see it light up, know I'm getting a call but can't answer or see who it is. Anybody know how to fix it, or at least give me an explanation so I at least have some sort of answer for people asking me wtf my phone is doing.
Click to expand...
Click to collapse
I get the same on my phone, and I also have S2U, don't know if that causes it or not. Try turning it off and then have someone call you and see if it still does it, that'll tell you.
I personally just don't worry about it. It gives me time to grab the phone.
i have the same thing, for voice calls as well as SMS. i do not have slide2unlock.
i really hate this and would even be happy if the screen would just stay off until the ringer starts - im fine with the delay, but anytime my phone is on for anything i think its about to ring...
You could just not look at the phone until it rings, although it's a hard habit to break, I feel ya.
But i think it has something to do with the phone needing to wake up before a notification box can even pop up
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
Hi there,
I have been a member for a short while but I have learned a lot from the members and enjoyed their genius in answering just about all of my questions ever since I upgraded to HD2.
Even after all my searches I still have one more bugger left with the phone which I could not find the work around as of yet.
I happen to be on the go almost all day long and I use wired or Bluetooth wireless hands free sets to get through my conversations.
Once I answer the phone via either of your headsets the screen stays on in the cramps of my pocket or back pack which mostly houses my HD2 while I am on the go. The proximity sensor seldom turns the screen off and as a result of my moving around some on screen bottoms, namely the end call, are pushed.
The hard key that turns the screen off normally also doubles back as the end call key so pushing it hangs the calls rather than turning the screen off.
In short I am looking for a way to make the screen go off during my conversations, preferably via some other hard key so as to make sure I have no unwanted anything activated, or deactivated for that matter
Thanks
So what seems to be the deal? It’s a weird question or what? I mean not even a simple reply? Have I got it so very off the base here or is this something nobody experienced or has had issues with?!!
Come on people throw me a line here!!
Did You tried a S2U2 ? It has a feature to lock device during incoming calls and many more.