I'm using TCPMP Player 0,66E version (it is last version) but when I watching any Video files screen back light is clossing down. And than home screen is timing out. Is there any program that it don't have this problem? I'm being all options but problem is issuing...
I have a problem with my IMate JASJAM. The camera app sometime behave weird and shows scrambled. After several reboots, it goes to normal. This has happened several times. I have tried hard reseting but so far no luck. The issues remains.
I am using the latest ROM version for IMATE JASJAM.
Any suggestions?
I have the T-Mobile varioII for only a few days.
The camera screen is displaying a line in the same position of the line just above the battery icon in the today screen. This seems to affect the use of the ok icon and button, in that it won't consistently save the settings. The line does disappear, but as soon as I use any buttons, it comes back.
Soft reset sometimes removes it until it reappears.
Do you have anything similar to this, or anyone comment please?
sorry, can't help there but here's my own camera problem:
After having to send back 3 tytns with screen alignment issues my 4th handset's screen works perfectly however on all 4 units the camera is crashing frequently, or sometimes just taking a blank, grey picture. I obviously want my camera set to best quality: 2m, superfine. When i take a pic where the light is good (mainly outside on a nice day) the tytn just switches to the today screen. If i try to access the camera app I get a "camera in use" error message, if i go to the running apps screen the camera app is not there to close, only solution is a soft reset, take a pic and it happens again.
The only workaround I have found is to set the camera to L, fine quality but i'm not happy with this - why have a 2mp camera that only works when it is dumbed down?
Surely i'm not the only one with this problem as all 4 sets had the same issue.
I'm loathe to send this one back in case the 5th set has the screen issue.
I faced the issue that my camera screen show scramble. And when I take the picture, the phone returns to the today screen, and when I tried to start the camera again, it gives me an error that the camera is already in use.
My problem of the camera having a line on the screen may not be the screen.
The line is appearing in the captured image. I didn't realise this until I rotated the image. So, it may be the camera/lens at fault.
I had the identical camera fault as described in the original post. Soft resets cleared the screen but the fault re-appeared after activating the camera. I had to pester the network into replacing my 1 mth old voda version. I have to admint the fault only started after I dropped the handset though.
lol well might as well add mine, my zoom doesnt work! Just will not shift from 1x
Schooleydoo, you know there is no zoom at 2 mp. It only works at lower resolutions and in increasing amounts the lower you set it..
Any solutions??
Hi,
Has any of you found the solution to the original problem? My phone's camera shows scrambled screen continuously and doesn't get back to normal.
Any ideas??
Regards,
Saurabh
I have a scrambled screen too. It started when i was too low with memory, after 3rd warning phone turned off itself 3 times - it never happened before, some of the programms crashed for good, and camera shows camera menu but picture that camera sees is scrambled, so are the pictures taken. When I tried to take a video it showed that I am missing some codecs. After Flashing I can record videos and make pictures, but I get only this results...
:/ .... anybody have an idea?
I don't know what exactly happened... I flashed phone with the same WM6 and installed Webcamera plus v1.051, and TCPMP v 0.72 RC and camera still wasn't working, then suddenly it started to work a day after .. i don't know if it will help anybody, but.... i think that some codecs from those programs in some way overwrited phone codecs...but I am a new, so I may be wrong
MS portrait is available now for WM5 and HTC devices too.
I tryed on my TYTN but I am not so satisfied.
See post on GENERAL forum too. ( http://forum.xda-developers.com/showthread.php?t=291444 )
Available for free at: http://research.microsoft.com/mcom/portrait/
I am interested about other HERMES users experience.
I post here again because I think that Hermes users are more looking in the Hermesforum than in the General forum
In general forum I wrote:
My feedback for microsoft portrait 3.0 (beta)
I tryied on a TYTN. Sorry to say but this version is more in a alpha than a beta phase!
- Powerconsumption is extreme
- Portrait uses the inbuilt back camera (2 mpixel maybe this is too much for UMTS network) and that is why the bright mode display starts (as usual when Cameraprogramm starts on the TYTN) wich is draining the battery. If the front camera would be selectable this would not happen (for example as “ATEKSOFT webcam” program can do). Msportrait is only interesting for users who own a Videophone (2nd camera and UMTS speed) so I do not understand why the frontcam can not be selected.
- I can not see a video on the PC althoug I tried different settings of bandwidth and framerates. With GPRS-monitor I checked and the average speed of TYTNS´s networkconnection was about 350 Mbit/s (so I guess its not because of low bandwidth)
- Sometimes after switch on/off portrait only a static picture is transferred to the PC (but no video)
- Audio is not realy full duplex. PC is receiving the audio signal only if I keep pressing on the audiobutton of the TYTN (as in the old version 2.3). Basicaly the audiosignal from the PC can be heared on the TYTN gapless, but sometimes audio transmission stops and works only after I press the audio button on the TYTN again.
- TYTN receives color video from PC very well (128 kbit/s). But there is a strange bug on the screen. The TYTN Video picture is visible in the background at the same time as the received video from PC (like overlaying). The green mask of the MSportrait menue is not transparent but everywhere else the TYTN´s camera picture is shining trough. (for example at the top taskbar)
- After cancel portrait the last taken picture of TYTN´s camera keeps staying in the background. This goes away only after a softreset. I tried to make a screenshot but on the screenshot the wrong background image was not visible!?
- Portrait is not really reducing the speed of my TYTN (allthough other users mentioned)
I hope MS research will work it out because if this programm works then it’s a real “MUST HAVE” application.
Already posted, but thanks!
V
Hi Guys,
i tried to search in the forums but could'nt find the answer to that.
When I take a pic with my HD, first everyting is alright. When the shot is taken the picture shows and the the small windows-thing appears in the middle of the screen and does'nt leave anymore.
After a couple of seconds (sometimes never) it's gone, just like my taken picture. Actually I can't take any picture with my cam, that annoying!
Has someone the same problem. It happens with all resolutions and settings in the same way.
Thanks
Christian
Yes! Something very similar happened to me just last night. I was using the video camera function to record my son's wrestling match. I had taken a few recordings of other matches, and then on the 4th or 5th match (a new file for each one) the recording suddenly stopped after a few seconds. Then after that the camera application was very slow to respond and had a black screen. I tried turning the camera program off and on, and tried doing a soft-reset. Nothing worked.
Then of course my son's match started and I figured I'd try to hit record even though it was a black screen and just hope that it was recording anyways. After 10-20 seconds of the black screen it suddenly turned on and was recording.
And this morning it's working find again, although I haven't tried taking more videos to test it out.
I'm using the panora Black Pearl 1.4 ROM.
me too, me too. It seems that this issue happens when I start to have many things in my phone (both in terms of software installed and taken photos). Waiting for a good explanation and solution to overcome this problem. I also notice that the videos taken are now not able to play, since I always have to use Core Player
I has this same problem.
If you have Advanced config installed make sure that you have
Encode photos in portrait mode set to : No under camera settings
This is funny because default value is YES and that freezes camera
Thanks a lot for the hint.
works perfect. now I got my cam back ;o)
You guys are just amazing!!!!!!!!!
I was about to hard reset (thanks to winnerzero who sent me here).
Saved me a hard reset!!
brilliant...
Thanks a lot to Kohozga
Your hint just saved me from hard resetting my HD.
Hi,
i have the problem that my Touch HD dosn't play sounds when the display is switched off for example while using the software Pathaway (outdoor gps software), Cachebox (for Geocaching) or TomTom. But otherwise when using Pocket Music (mp3 player software) music is played when the display is switched off!?
Is this software dependent? Is there a possibility to configure the device for always playing sound when the display is switched off (I will use it for example for playing approaching sounds when approaching to a waypoint - to save battery power so the display should be switched off).
Maybe my question was already answered in this forum but, sorry, I didn't find anything concerning my problem.
I hope I will get some help or a link that helps me further.
Thanks
look at those programs settings for a "blank display" option
your problem is not that the display is switched off it
that you think thats all you pressing the suspend button does
but it does much more like put your device to sleep
resulting in all non phone or nofitication programs being disabled