Database Users

iGuidance 3 issues

Well, first off let me say I have just upgraded from iGuidance 2 to iGuidance 3. iG 3 is about 8 MB bigger than iG2 and therefore I had to install it on my mini SD card. It works perfectly fine, loads seems to be just as fast (since maps are stored on the mini SD with either program. Anyway, my problem is basically that the program works great, but when the lady comes on telling me when to turn, lets say in 2 miles...it is REEEEAAAALLLY slow and exhagerated. She goes like, Turn.........left..........in........two........miles...... I recently started overclocking my 8125 to 260 MHz to see if it was a speed issue, but no change as far as the sound goes. Any ideas?

turn off your internet connection and you should be OK
DNO

IGuidance 3
Runs fine for me, at stock speed, program and maps on the mini-SD. Maybe it is the overclocking?
- Tim

I have Iguidance 3.0. Now I need the GPS module.
Which GPS module do you all use? What is the best now? Holux, Globalsat? or some other.
Thanks
[email protected]

i use the Rikaline GPS-6033 Bluetooth from buygpsnow.com its $89
picks up 32 sats works indoors and its fast at cold startup locks on to sats
in under 30 seconds i use tomtom and iguidance 3

Re: IGuidance 3
Tim Fountain said:
Runs fine for me, at stock speed, program and maps on the mini-SD. Maybe it is the overclocking?
- Tim
Click to expand...
Click to collapse
I tried it at stock speeds and overclocked speeds, it still did the same thing. I'll try turning off my ActiveSync with my Exchange later today when I'm going on a small road trip and see if that solves the problem.

jschaff said:
I have Iguidance 3.0. Now I need the GPS module.
Which GPS module do you all use? What is the best now? Holux, Globalsat? or some other.
Thanks
[email protected]
Click to expand...
Click to collapse
I use the Holux GPSlim 360 I think it is. The number may be off though. It's uber small and I just throw it in the center console in my car and use it when necessary. Cold start is about 30-45 seconds.

The Rikaline GPS-6033 does not show to be SirfIII. I thought this is the latest technology to get. Is this a more recent technology or is the SirfIII over blown?

I brought this to the attention of iNavcorp, makers of iGuidance, a few weeks ago. This was their reply:
"Our programmers are currently looking into this issue. In the mean time, while turning off the phone will resolve the issue, based on our knowledge, you should be able to simply disable the gprs (wireless data connection) function on your PPC phone which will also resolve the slow voice issue, but this way you will still have phone access."
I had told them that turning off the phone solves the problem. Anyway, they are aware, and I am hopeful that they will fix this in an upcoming patch.
p.s. DNO's answer was right on...

jschaff said:
The Rikaline GPS-6033 does not show to be SirfIII. I thought this is the latest technology to get. Is this a more recent technology or is the SirfIII over blown?
Click to expand...
Click to collapse
SiRFstarIII is amazing. Don't let anyone tell you otherwise.

I use the Holux GPSlim 360 I think it is. The number may be off though. It's uber small and I just throw it in the center console in my car and use it when necessary. Cold start is about 30-45 seconds.
Click to expand...
Click to collapse
It is the GPSlim 236 and it is a great unit! I love mine.

The voice on mine works great, I could not get it to instal to the SD, I had to install the CAB there, and then run that to install the actual program to the phone. My problem is that the maps haven't been updated with streets that have been made in the last few years, and the shopping POIs arn't that great.
I have a Houlix 268 slim (I Think thats the model), and it randomly loses connection, so I have to power-cycle it and restart IG3, for it to regain connection.
Also every once and a while it does a wierd click sound when I'm slowing down.

mm_thor said:
I brought this to the attention of iNavcorp, makers of iGuidance, a few weeks ago. This was their reply:
"Our programmers are currently looking into this issue. In the mean time, while turning off the phone will resolve the issue, based on our knowledge, you should be able to simply disable the gprs (wireless data connection) function on your PPC phone which will also resolve the slow voice issue, but this way you will still have phone access."
I had told them that turning off the phone solves the problem. Anyway, they are aware, and I am hopeful that they will fix this in an upcoming patch.
p.s. DNO's answer was right on...
Click to expand...
Click to collapse
I did notice this was the issue this weekend. Is there a "quick" way to disable GPRS? I guess i'll keep an eye on iNavcorps website.

Turn it off from the comm manager. Mine works fine while I am using BT for my headset and on the phone talking.

Do iGuidance do maps for Europe? THey seem to have discontinued their european product; if I can get the europe map from v.2.12 will it work with v.3.0?
Cheers.

tom tom 6 + exec

how easy is it to install tomtom 6 on a O2 EXEC and get it working with a bluetooth gps reciver?
Are there any/many cracked coppies of this floating arround?
Cheers
Oblique

oblique said:
how easy is it to install tomtom 6 on a O2 EXEC and get it working with a bluetooth gps reciver?
Are there any/many cracked coppies of this floating arround?
Cheers
Oblique
Click to expand...
Click to collapse
Here's an idea: try not stealing.

i don't nomaly steal but as i don't know how stable tomtom works on my phone or how stable bluetooth gps works on my phone i am reluctant to spend 80quid to find out.

works very well, you have to config your exec to get TOMTOM to work with bluetooth gps( you can find that on here somewhere).

It works fine, but slower than on a QVGA screen device.
I have used v5 and v6 on AKU 2, 3, and now Crossbow ROMs, it works fine on the Universal, so you can buy it without worrying.

jowett69 said:
works very well, you have to config your exec to get TOMTOM to work with bluetooth gps( you can find that on here somewhere).
Click to expand...
Click to collapse
You don't actually have to config anything if you have the TomTom GPS, it turns on BT itself, and finds it.
If you have a non TomTom BT GPS, simply pair it, and select an outgoing COM port, then when you fire up TomTom, tell it that it's a BT GPS on whatever port you chose.
All very easy.

cool, that is the kind of information that i was looking for, does anyone here use the live trafic update service? does it work well and divert you automaticly and how much does it cost to subscribe?
cheers

If I can remember, you and get 1 free month to try. Traffic is not always update!!!!!

It's good if there's a large incident, but in my experience you usually get stuck in things before they hit your device, and you see the road signs on motorways and things warning you anyway.
I stopped the subscripton, and just reroute myself if I see warnings, or hear something on the radio.

I am using TomTom 6 on my Exec now.
Previously used Navigon MN|5 which required *LOTS* of memory, so TomTom was a nice refreshment with its 7-9 MB memory trace.
Had problems setting up Bluetooth receiver. It wasn't showing up in the port list when I selected Bluetooth one. What I did was: added an incoming serial port, run TomTom and set port to this one (did not work yet!) then closed it and removed the port; after that TomTom just worked straight away At this point, an attempt to change port led to inability to get out of port selection, and you're buggered again. I'm sure that's some glitch, but I solved it anyway. May be there's a neater way of doing this.
But the software itself was good and stable, does what's on the tin, copy a directory to your card and you get Full Postcode navigation (very useful when finding businesses and not residential homes), and POI Warning function is built in now -- a *major* plus, never really got time to make POIWarner work properly. Tunnel mode -- progressive marker movement when lost GPS signal in a tunnel -- and that won my heart.
I do understand people's need to try BEFORE you buy, not after your money is tied up with some dud product and you get no refund. Go Trial, go.
Well in this case I'm pleased with TomTom 6 and its services. You can easily get a camera database each month from the Net and probably can live without Traffic service, but for me £33 a year doesn't seem too big a dent in my wallet - compared to £170-200 TMC receivers currently available on the market.

AlanJC said:
It works fine, but slower than on a QVGA screen device.
I have used v5 and v6 on AKU 2, 3, and now Crossbow ROMs, it works fine on the Universal, so you can buy it without worrying.
Click to expand...
Click to collapse
AlanJC: Have you tried TT6 under WM6 and did all work well? Also, was TT6 happy after you upgraded the ROM - did you have any problems with TT6 thinking the Device Code had changed, thereby needing to re-register the software?

tomtom 6 NAVIGATOR

I have installed a (legitimate since you ask) copy of tomtom NAVIGATOR 6 onto my MDA Vario II. The 4+ Mb programme resides in main memory and the Western_Europe map and everything else is on the 2Gb Sandisk Micro SD card. I have a Fuzion SiRF starIII bluetooth GPS receiver. tomtom's US website says the hardware and software are compatible, the UK site does not. The programme runs very slowly (it's not smooth as I have seen demonstrated on a Mio, which had a 312Mhz processor, but is stilted). Sometimes the machine locks up and I have to press the 'OK' button. When browsing the map, the machine struggles to process the picture. I ensure that there are no running programmes. What is the cause, please? Could it be that the hardware and software are incompatible?

just try to flash aku 3.3 to your vario. it will make ur phone work smooth and will not hang at all. then u will be able to run tomtom 6 perfectly

Rather than risk aku 3.3 issues I suggest you are probably right and there is soe sort of hardware issue. I have navigator 6 and TOMTOM BT receiver and hav absolutely no issues at all

I use TT6 on a daily basis and I can say that under WM5 AKU2.3 it used to hang very often when putting post code. I ran ok. After flashing AKU3.3 it works flawlessly. The same with WM6. Now it also seems to run a little bit faster.

Hi, everybody,
any ono knows where a can find a tomtom software for my Asus p535.Sorry to ask but i'm new on this matter and don't know how to do it.
Many thanks...

silvino said:
Hi, everybody,
any ono knows where a can find a tomtom software for my Asus p535.Sorry to ask but i'm new on this matter and don't know how to do it.
Many thanks...
Click to expand...
Click to collapse
Welcome, but you are in the wrong place my friend. This is the HTC Hermes forum. This site is primarily for HTC devices. However here is Tomtom 6 for PPC phones (official tomtom site):
http://www.tomtom.com/products/category.php?ID=2&Lid=1
Mike

What you need to do is disable all the POI's except the speed cameras. Mine did exactly the same thing. You can still navigate to the POI's, they just don't show up as you're driving past.
Cheers.

ok... maybe you guys who have already told him to upgrade his phone to aka3... somthing or other do know best BUT...
could you please say what version of tomtom 6 you have. (there are at least 3 versions i have used)
to find this
load tomtom
on the navigation window tap the section of the screen that shows GPS signal strenth this will load the route summary window.
in here below the right hand side pannel that again show the GPS signal strength it should say the version number 6.XXX
please let me know what versino you have... i have found varying levels of stability and performace with diff versions of tomtom.. might be as simple as a different tomtom build to resolve your issues.
Acuum.

Yostin said:
What you need to do is disable all the POI's except the speed cameras. Mine did exactly the same thing. You can still navigate to the POI's, they just don't show up as you're driving past.
Cheers.
Click to expand...
Click to collapse
yep this is the same on mine, disabled all but a few POIs and no or very rare freezes. if it does freeze up hit the hangup button and relaunch.
there was some hope with the Version 7 tomtom out soon that there would be a fix for the problem.

Acuum2 said:
ok... maybe you guys who have already told him to upgrade his phone to aka3... somthing or other do know best BUT...
could you please say what version of tomtom 6 you have. (there are at least 3 versions i have used)
to find this
load tomtom
on the navigation window tap the section of the screen that shows GPS signal strenth this will load the route summary window.
in here below the right hand side pannel that again show the GPS signal strength it should say the version number 6.XXX
please let me know what versino you have... i have found varying levels of stability and performace with diff versions of tomtom.. might be as simple as a different tomtom build to resolve your issues.
Acuum.
Click to expand...
Click to collapse
My Hermes is running with AKU 3.3 and my TomTom is 6.0.30

ok. i have had pretty good results with 6.0.30 but it might be worth you trying the 6.0.20 version and see how you get on.
at least you will loose the anoying mute on start bug. (the phone sees a data connection and asuumes its a phone calls so starts in mute.)

ok well the results your described i saw with the first tomtom 6 i used, im assumeing it was on 6.0.00 but i have had pretty good results with 6.0.30 but
it might be worth you trying the 6.0.20 version and see how you get on. I'm using that this week by mistake since my last hard reset but its been stable for me.
at least you will loose the anoying 6.0.30 mute on start bug. (the phone sees a data connection and asuumes its a phone calls so starts in mute.)

TomTom sound off when starting

Hi there,
Is there someone using TomTom Navigator 6.03 and experiencing the same strange thing I do?
Everytime I start TomTom the sound is off; the sound off icon is on screen. I have to tap Turn on sound in the preferences menu twice in order to have the sound turned on and to have the icon disappeared.
When I exit TomTom and start it again, the sound is turned off again.
Annoying and no idea how to fix that. Deleting the navigator.cfg didn't help.

MapSettings.cfg in the current Active map folder - is it set to read only per chance? - Mike

JayRayMee.NL said:
Everytime I start TomTom the sound is off; the sound off icon is on screen. I have to tap Turn on sound in the preferences menu twice in order to have the sound turned on and to have the icon disappeared.
When I exit TomTom and start it again, the sound is turned off again.
Click to expand...
Click to collapse
Hi. I am having exactly the same issue here with TT. I've checked my mapsettings.cfg file and it's not read only...The only thing I can think of is it is because my map is installed on the microdrive, not an SD card
Any help appreciated too!
Merlin

Mapsettings.cfg is not read only and my maps (everything on TomTom) is installed on the Storage Card.
I have exactly the same installation running on my Touch as well, and no problems at all. Seems to be something on my X7500 then.... but what!!???

I am having exactly the same problems, it's been driving me potty! TT is installed on storage card, no idea whats causding it!

Same problem here...
However it started when I updated it from 6.01 back on my old Wizard. That worked properly. I did discover that you don't have to go to Prefs... you can get the sound back on by tapping the joystick to the right. Also, it doesn't happen when it's on AC power, but only on battery.

jsp91470 said:
However it started when I updated it from 6.01 back on my old Wizard. That worked properly. I did discover that you don't have to go to Prefs... you can get the sound back on by tapping the joystick to the right. Also, it doesn't happen when it's on AC power, but only on battery.
Click to expand...
Click to collapse
Not a bad workaround, just wish we could find what was causing this.

Just to clear things out, but who has this problem with official and legal versions of TTN 6.03? - E.g. has it something to do with cracked/patched versions?

Mine's legal...
Although I'm starting to regret messing with TomTom. Their customer service is awful. Unless your device is one the approximately 5 devices they officially support, they'll wash their hands of you if you call for help saying your device is "not compatible." I called for support on my Wizard, which to be exact was a Cingular 8125. That phone is not on their list of compatible devices, but its twin, the T-Mobile MDA, is on the list. I called and said I had an 8125 and they refused to help me. I hung up, called back, and said I had an MDA. They tried to help me, but when they didn't have an instant answer for me they just said, "Sorry, we don't have that problem on ours" and started spewing out useless canned knowledge base articles. For heaven's sake, the MDA and 8125 are the SAME PHONE! Also, don't tell them you have WM6, because WM6 is "not compatible." Basically, if you have to call TomTom support, lie through your teeth. I'm waiting for OnCourse Navigator, due out in October or November, and then I may abandon TomTom.

Just to compile information...
OK Let's see:
1) I got my TT6.03 legal with legal maps and I got the problem.
2) Running my old legal TT6.01 I didn't had the problem.
3) If I do it using Prefs I need to activate twice the sound in order to get the mute removed
4) I got the problem running on baterry, using the oficial car charger and using the wall charger. I got the problem all the time no matter what power source I'm using.
5) The "Move Joysting to Right" workaround works great. Thank you very much. That don't solve the problem but makes my live much easier.
So... that's the point. I'm running TT6.03 (legal) over WM5 ROM in spanish.
Best Regards,
mahjong

So.... resuming: it's TomTom Navigator 6.03 with the combination of the HTC X7500/Athena.
The problem isn't there while running 6.03 on a HP iPAQ hx4700, Qtek 9000 and HTC Touch.

I have 6.030 on WM6 English on my Athena and I don't have this problem...

I don't have this problem either. I'm using version 6.0

LOL !!!!
Ok man !!! Is your connection GPRS/EDGE/UTMS/HSDPA is online ?
Because if there's an active connexion Tomtom start allways with the sound off.
Try to disconnect before launching Tomtom

Gsyltc said:
LOL !!!!
Ok man !!! Is your connection GPRS/EDGE/UTMS/HSDPA is online ?
Because if there's an active connexion Tomtom start allways with the sound off.
Try to disconnect before launching Tomtom
Click to expand...
Click to collapse
Then that goes for version 6.03 only. With 6.00 it didn't matter wether the data connection was active or not.
Anyway, I need to stick with 6.03 and live with the mute problem, since 6.03 can work with my voices stored on storage card (instead of MD) and performs a fix in only seconds (instead of 1 - 1,5 minute).

No sound after starting TT6.03
I have the legal version of TT6.03 and I have the problem too. I only have this problem when my phone is connected to the internet using gprs, umts or hsdpa. If their is no connection I do not have this problem. It also happens on other devices for instance the HP iPAQ 6340 and it is a know bug. TomTom know's about it. It will be solved in te next version.
QAN

Gsyltc said:
LOL !!!!
Ok man !!! Is your connection GPRS/EDGE/UTMS/HSDPA is online ?
Because if there's an active connexion Tomtom start allways with the sound off.
Try to disconnect before launching Tomtom
Click to expand...
Click to collapse
BINGO!!! We got a winner here ladies and gentlemans.
Mine has the connection online all the time due to my push-mail solution (Blackberry Connect). I did some test shutting down Blackbery Connect before starting TT and "the problem" just gone.
Thank you. Anyway since I must have connection online all the time the "Joystick move to right" trick is great for me.

TomTom6 Sound
Guys great thread, I am glad to see someone else is struggling with this strange issue. Its really no big deal, its just annoying. Any updates on this issue yet?

And here was me thinking it was my *cough* test *cough* version. Loving the 'fix' taa v much. I might have to write a mortscript that recycles the data connection, rotates the screen and starts TT.

tomtom 6.02-7910 works fine
I also was having problems with tomt 6.032 but the problems does not seem to exist in tomtom 6.02-7910

New Treo Pro thoughts and Tom tom question

I have been using windows mobile devices now for about 5 years,my first phone was an mda compact III which was excellent.next up was the Mda Compact 5 which also is a very capable device, might I ad these 2 devices were brilliant with the sat nav never missed a beat allways having plenty of satalites ,my main reason for having these windows mobile devices is all in one phone and sat nav as I am a driver and sat nav is a MUST .I allways have the latest version of Tom Tom navigator installed on my phone. This is when I started to get fed up with touchscreen phones as they can be so annoying with wrong finger scrolling and such likes, I decided I now need a device with physical keys.
This were my search for qwerty keyboard phone began,firstly I bought the Samsung i780 which on the face of it was a fantastic device it was solid,fast ,However the gps was just awfull I loaded up my tom tom but I tried in vein to install endless apps like gps test /gps gate,etc etc and just could not get it to work right,
Next up was the I-mate 8502 again another nice device but 10 -15 resets a day all got too much and that went also.
So here I am with the Palm Treo Pro ,managed to get a nice example from Ebay for £70,really nice device loads my tomtom 7 with 850 maps on no problem,really likin the phone ,I think I have finally found a phone that will suit all my needs ,spb mobile shell to get away from the home screen and I`m away. First day using the Phone with the tomtom on and the the phone freezes on me twice ,soft reset sorts it out .,I have read endless amounts on this since then with no conclusive remedy.IS THERE AN ANSWER TO THIS PROBLEM or is this fine phone going to be a non starter,I will be so disapointed as i really enjoy using this device,all help or comments will be greatly received.
Thanks in advance.

well if you have a data plan, i highly recommend getting google maps. otherwise you could try bing. both are very good applications and save you a lot of space. sorry im not familiar with tom tom, but i do know that there is not too much ram on the treo. if you close all your other applications in the background, you might get it to work then =]

Thanks for your reply .Think I have found a remedy to the tomtom freezing daily,I changed the baud rate from 4800 to 9600 and so far no more freezing and losing sats,only been 2 days but no more hang ups.

delta 1646 said:
Thanks for your reply .Think I have found a remedy to the tomtom freezing daily,I changed the baud rate from 4800 to 9600 and so far no more freezing and losing sats,only been 2 days but no more hang ups.
Click to expand...
Click to collapse
Hi, if u don't mind shelling out some more money i would recommend u try Garmin's navigation software. I've been using it almost daily for about 6 months with fast gps detection rate, etc, and it has never frozen up on me. and as computerguy pointed out, it works best if other applications in d background are exited.
P.S. I'm using a custom ROM though.

I'd second the Garmin software. Used to run the TomTom software on mine and had nothing but troubles. It would either freeze up or just would lose the GPS signals constantly. Garmin might not be as nice to use but its rock solid in comparison.

I agree about TomTom freezing. I don't have it as often as you do but I do have occasions where it seems to lose all track of where it is.
I have switched to Sygic MM10 and it's brilliant. It uses the same maps as TomTom but has better graphics and is rock solid