Database Users

MDA Compact II unlocking

hi folks, thanks in advance ,
i bought a mda compact , an sucessfully unlocked it with software from your ftp...ty.... So i upgraded this morning to a MDA Compact II, model no. pm200 and tried to unlock with the same tool , and it says device not recognised pm200.
i know its running windows mobile 5, any help to free the simlock would be greatfully recieved , all the best , oblivious. :lol: :twisted:

UNLOCK MDA COMPACT II / HTC CHARMER / PM200
Hello,
go to http://forum.xda-developers.com/viewtopic.php?t=33796&highlight=lokiwiz
Download lokiwiz.zip - HTC Wizard Unlocker v0.1
VERSION 0.1 !!!!!
follow these instructions:
1 - Unzip lokiwiz.zip to somewhere in your computer
2 - Copy EnableRapi.cab to your Charmer / PM200
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via ActiveSync with the computer
5 - Execute lokiwiz.bat and follow the instructions on your screen...
I've just unlocked my MDA Compact II with it, and it works.
Regards.

UNLOCK MDA COMPACT II / HTC CHARMER / PM200
Just wanted to confirm that i've had sucess unlocking my mda compact II (htc charmer). Followed shoptillyadrop instuctions and they worked a treat. Thanks for help.
Only, one comment to your instuctions - line 2 you wrote wizard rather than charmer.
Thanks again.

Will the SIM Lock be restored after I have performed a hard reset?
Thanks
Nase

No,
the Phone will remain unlocked. If you want to re-lock your phone, the same tool will do the job.
Regards.

Thanks for your quick reply.
The procedure sounds very easy so I will give it a try this evening.
Thanks
Nase

You are talking about NETlock, not SIMlock for a specific number (Prepaid), right?
I want to buy a MDAc2 from T-Mobile but have to use it with o2.

melino said:
You are talking about NETlock, not SIMlock for a specific number (Prepaid), right?
I want to buy a MDAc2 from T-Mobile but have to use it with o2.
Click to expand...
Click to collapse
Yes that is what I would like to do.
I guess that the Unlocker will remove any lock. Am I right?
Thanks
Nase

unlock mda2
work fine for me thank you :lol: :lol: :lol: :lol: :lol:

Has someone successfully unlocked (sim & Net) the t-Mobile German Compact 2 with a Tool?

PM200 UNLOCK PROBLEMS
HAVE USED LOKIWIZ VERSION 1 ,WELL HAVE USED THEM ALL WITHOUT SUCCESS ITS DRIVING ME MAD PLEASE SOMEONE HELP
GET''AN ERROR OCCURRED MESSAGE
THANKS

I've done it without problem. You list out your procedure done to see if we can help.

Hello. I had problem with my Mda Compact II T-Mobile UK. After I input Pin ti told that: Data Crashed conntact Your Service. I went to imei-check.co.uk and payed 20 GBP and in 5 minutes my Mda Works as a new one. Its the best way to solve this problem and problem with simlock too. Best regards !!!

A lot of people have unlocked their Charmer with out any problem. And there are at least two (including myself) who has flashed the Charmer ROM as well. Good if you can list out your specification and procedure that you have used that messed up your Charmer.
Usually, when you have the error message "Data Crashed conntact Your Service Provider", it means that the IMEI area has been messed up. And, the only solution to this problem seem to be to go to the imei-check.co.uk

Hey guys.
I have just got a Tmobile MDA Compact 2.
I cannot unlock it though.
I have tried V0.1 and V0.2b.
When my simcard (O2) is in the phone, it just asks you to enter the unlock code, and won't let you access any menus.
So I remove the SIM, install the EnableRapi.cab and then insert the Sim card. And click lokiwiz.bat on the PC whilst Activesync is running, I select U (have tried C aswell on V0.2b) and it doesn't show any errors, the phone resets, but the lock is still present.
Does anyone have any ideas ???

Unlock not working on my Charmer
Hi Guys!
I have followed the instructions carefully und copied the file EnableRapi.cab to my charmer, executed it there, made sure that Charmer is connected via ActiveSync, opened the file lokiwiz.bat on my PC, and waited until Charmer rebooted!
After reboot I inserted my SIM Card and the Result was a window that asked me after typing in my PIN for a Network Code!
I have tried all the Versions on the Unlock page, none worked! I have deactivated my AntiVirus Programms and Firewalls!
My Charmer is (still) locked from T-Mobile Austria! All I receive on my PC in the same Folder is an Output File called "Unlocked" which I cannot open with a program on my PC!
Thank you very much in advance for your help as otherwise I have to unlock it via Internet and this would cost me 30 BP!
;-)
Vibe

lokiwiz probably wont work on AKU2 roms because the OS is more protected. check your versions, Windows Build 14847.2.0.0 is AKU2.

dave106 said:
lokiwiz probably wont work on AKU2 roms because the OS is more protected. check your versions, Windows Build 14847.2.0.0 is AKU2.
Click to expand...
Click to collapse
that's exactly my version too...
can you keep me updated if there is a version that can unlock this type ?
thx !

Look what abzee wrote on: http://forum.xda-developers.com/sho...ght=could+not+update+itsutils.dll#post1039958
it took me 5 minutes to remove the lock using his instructions.
Thanks to abzee and of course to machinagod.

I used Lokiwiz03 yesterday with my Charmer. The Charmer is the german MDA Compact II with T-Mobile Netlock. It takes only some minutes. It was very easy to use-no problems.
Great Work and a very great thank you!

lokiwizMSL 0.3 - Lokiwiz's Back, now working with SPL 2.x

Hello to all.
First:
I will NOT be held responsible for any problems caused by this tool.
I'm releasing the 0.1 version of the Wizard Unlocker. It's similar to the imei-check.co.uk unlocker (it patches the same bit), however it doesn't cost you £20 per bit :wink: .
Version 0.2: New CID unlocking abitity
Credits for the 0.2 version go to SPV-Developers, namely: itsme, Arc and Arisme...
Version 0.2a: CID unlocking abitity FIXED
Credits for the 0.2a version go to Chan, who took care of the errors I managed to punch in the script when I packed it the first time... Thanks!
Version 0.2b: SIMlock abitity FIXED
Credits for the 0.2b version go to kpcomp, who found the missing GOTO End instruction after a SIMlock... Thanks!
Version 0.3: SIMLock ability redone for all SPLs
Credits go to Buzz_lightyear (Go buzz) for pointing out the obvious.
Now version 0.3a: Minor update, corrected Rapi unlocking
Credits go to everyone that reported problems in the forum
I can't stress enough that this work is heavily base upon the itsme tools, so my thanks to him. Also, spv-developers and xda-developers boards were an invaluable resource.
I would also like to thank all the people that supplied their phone info in this thread: http://forum.xda-developers.com/viewtopic.php?t=33479
Ok, now the instructions...
1 - Unzip lokiwiz.zip to somewhere in your computer
2 - Guarantee that your phone is connected via ActiveSync with the computer
3 - Execute lokiwizMSL.bat (on your computer! My inbox is filled with this kind of error)
4 - It will give you the SIM unlock code after it runs, just get a different SIM from the one your phone is locked to and insert the code...
5 - Have fun...
Frequently Asked Questions:
Q - Will it hard-reset my device?
A - No. It will do a soft reset at the end of the process for applying the changes
Q - I locked my device and now it shows only the SIMlock window
A - Get your phone showing the SIMlock window. Connect it via ActiveSync. Use the tool to get your unlock code
Q - How about the CID unlock tool? (for using any type of roms)
A - Doesn't work yet... Stay tuned
Q - I'm having problems with Unlocker not connecting to the phone
A - Disable all kinds of Antivirus, Firewalls and similar applications before running Lokiwiz.
Bye to all,
Ricardo Afonso
afonso (dot) ricardo (at) gmail (dot) com
PS: If you like it... send me a mail... :wink:

It doesn't look like this has worked on my Prophet. (Orange UK M600 with latest Dopod ROM).
It looks like the auto install of "EnableRapi.cab" did not work.
I ran "LokiwizMsl.bat" 3 times, with no SIM, with the Orange SIM (it is SIM locked to Orange) and with a VirginMobile SIM. Also closing ActiveSync each time on the PC. Re-started the PC after the second try as well!
I think on the second try of running "LokiwizMsl.bat" the phone asked if I wanted to install "EnableRapi.cab" I selected "Yes" but it still went the same as the other times.
This is what was displayed on the PC -
********************************************************
C:\Lokiwiz03>lokiwizmsl
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Lokiwiz03\Utils\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
opening: lock_backup.bin: No such file or directory
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
********************************************************
I installed the "EnableRapi.cab" manually and deleted all the first part of the "LokiwizMsl.bat" file so the file contained just -
*******************************************************
ECHO RAPI Unlocked.
ECHO Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT
ENDS
ECHO
Utils\pdocread.exe -n 1 0x000000 0x10000 -b 0x4000 lock_backup.bin
ECHO
ECHO
ECHO SIMLock Code is your code... Type it with another SIM in...
ECHO --------------------
Utils\lokiwizMsl.exe lock_backup.bin
ECHO --------------------
ECHO "Standing on the shoulder of giants"
ECHO Ricardo Afonso, 2005
SET Choice=
SET /P Choice=Press Any key to Exit.
********************************************************
Running the above cut down version of "LokiwizMsl.bat" the PC displayed -
********************************************************
C:\Lokiwiz03>lokiwizmsl
C:\Lokiwiz03>ECHO RAPI Unlocked.
RAPI Unlocked.
C:\Lokiwiz03>ECHO Starting MSL work... DO NOT DISCONNECT UNTIL
THIS SCRIPT ENDS
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
C:\Lokiwiz03>ECHO
ECHO is on.
C:\Lokiwiz03>Utils\pdocread.exe -n 1 0x000000 0x10000 -b 0x4000
lock_backup.bin
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
C:\Lokiwiz03>ECHO
ECHO is on.
C:\Lokiwiz03>ECHO
ECHO is on.
C:\Lokiwiz03>ECHO SIMLock Code is your code... Type it with another
SIM in...
SIMLock Code is your code... Type it with another SIM in...
C:\Lokiwiz03>ECHO ----------------------------------------
C:\Lokiwiz03>Utils\lokiwizMsl.exe lock_backup.bin
Lock Status: 0500000000000000
SIMLock Code: 4810**** (was 8 numbers)
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
C:\Lokiwiz03>ECHO ----------------------------------------
C:\Lokiwiz03>ECHO "Standing on the shoulder of giants"
"Standing on the shoulder of giants"
C:\Lokiwiz03>ECHO Ricardo Afonso, 2005
Ricardo Afonso, 2005
C:\Lokiwiz03>SET Choice=
C:\Lokiwiz03>SET /P Choice=Press Any key to Exit.
Press Any key to Exit.
C:\Lokiwiz03>
********************************************************
With the VirginMobile SIM, it was saying something like You have had 1 incorrect try wait to enter SIM unlock code.
When the screen changed to allow me to enter the code, I entered the 8 number code from the PC screen. Checked the number on the phone against the number on the PC about 10 times then pressed "Unlock" on the phone.
It now says
"Service Provider is locked
Please input unlock code."
I'm not sure if I should enter the same number again or if that would be my last of 3 chances to enter the unlock code...
I'm not sure if this is asking for the number that Lokiwiz03 has provided as it now doesn't say anything about having had 2 previous tries! (Which I have - I once entered a code that was on the screen when Lokiwiz02 failed with the ITWrite Disk Error).
What should I do?
Alan

Just want to clarify that I did wait for ActiveSync to connect each time before running the batch file on the PC!

After seeing robincop's post on another thread about Lokiwiz03 I tried runing the full origonal Lokiwiz03 version of the "LokiwizMsl.bat" on the PC after having previously manually installed "EnableRapi.cab" on the Prophet. (Orange UK M600).
It ran without any errors and gave THE SAME 8 digit SIM unlock code as before.
I had run this without re-starting the phone so it was still asking for the Service Provider Unlock Code for the second time. I had previously entered THE SAME CODE when it asked for it at power-up with the VirginMobile SIM in it.
This time it WORKED
Many thanks and MUCH RESPECT to MACHINAGOD.
I'm now using a dual SIM with Virgin(T-Mobile) and Tesco(O2) SIMs in it.
Anyone know how to get a Prophet to display on the Today screen which network it is on?

WiVit SIM Status Switcher is what you need.
But unfortunately it doesn't work "out-of-the-box" with WM5.
You should search this forum, there are some threads with solutions to get this program work on WM5 (until the developer releases a WM5 version).

I runned Lokiwiz03 the way it is described in robincop's post and it worked (thanx machinagod and robincop!). I just wat to clarify those who are confused about entering the codes. So this is the way to do it:
1 - After running Lokiwiz03 (see robincop's post) turn off the phone and turn it on again.
2 - when it asks your pin code enter your normal pin.
3 - it then asks you for the Service Provider Unlock Code: It is here that you insert the sim unlock code obtained with lokiwiz.
Hope this can be helpful!

I ran this on my MDA..seemed fine on the computer screen, everything came back & it gave me a code..however I've soft-rebooted my MDA about 5x now and don't see a screen to enter the code. It goes from the password/PIN screen right to the today screen. I searched around on the phone for a utility to enter the code into but so far no luck. Do I have to put in another provider's SIM card before I can get the 'unlock prompt'?

benenglish said:
I ran this on my MDA..seemed fine on the computer screen, everything came back & it gave me a code..however I've soft-rebooted my MDA about 5x now and don't see a screen to enter the code. It goes from the password/PIN screen right to the today screen. I searched around on the phone for a utility to enter the code into but so far no luck. Do I have to put in another provider's SIM card before I can get the 'unlock prompt'?
Click to expand...
Click to collapse
Ya the phone does not know that anything needs to be done till you put a 2nd sim card in. Then it sees that it is locked and will give you the screen to enter the code.

machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ∩X à`e\!±Φ"‼-ÄC
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
HELP!!?! What did I do wrong? I tried installing the CAB Files manually, but it did not help

That means your mobile phone is sim unlocked and doesn't need to be unlocked...
Bye

LOL. You are right. But I never unlocked it. It's brand new....
I thought o2 locked their XDA Mini S?
Anyway, should we expect to see CID Unlocking for SPL 2.xxx?
Thanks

I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo

but ROMUpdateUtility_noid(Ver:2.5.2) don't support the Prophet ROM that cooked by typho5.exe(Ver:1.0.0.0) and nb2nbf_tornado(Ver:2.2.0.0)

machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Thanks for your work, but CID unlocking is important for the prophet users because we are only able to upgrade, not downgrade. So if someone installs the latest version of Dopod ROM and wants to go back to an iMate ROM, it is not possible.
Thanks for your efforts

Two things:
I've said it 2 times already, this is the last.
The only part of the ROM upgrade that is protected against downgrade is the SPL and the IPL. The rest is unprotected. A specially cooked rom should do it...
2nd:
The ROM updater I attach to this message should work with the cooked roms.
Bye,
Ricardo

andrew_sh said:
machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Thanks for your work, but CID unlocking is important for the prophet users because we are only able to upgrade, not downgrade. So if someone installs the latest version of Dopod ROM and wants to go back to an iMate ROM, it is not possible.
Thanks for your efforts
Click to expand...
Click to collapse
Hmm, with the modified ROMUpdateUtility.exe to ignor the vendor, can't you downgrade too??
machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Hmm, but are you going to try to finish the CID unlocking ?? Your tool is great cause one can return to a previous CID state.

You are the man!
It's work perfectly sim unlocked on a Cingular 8125, I can now use T-mobile or oversea sim card with it. Thank you so much!!!!!!!!!!

machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Howdy machinagod - I've got access to a AKU2.2 device and need to dump the IPL and SPL. (already grabbed the OS, radio, and ext ROM with awizard). Any advice you can give me on getting the IPL/SPL dumped? It's CID locked and r2sd gives a perm error.
Gracias amigo!

machinagod said:
A specially cooked rom should do it...
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/viewtopic.php?t=48965
Noone knows how to cook a rom for this puprose.
I have had experience cooking roms with your tools but I need some pointers.
Do I have to change only the headers? Do I have to delete the bootloader from the nk.nbf?
Thanks
Andrew

I have big problem with MDA vario Tmobile Slovak. I can not unlock it. I used lokiwiz 2a, lokiviz 3b but still no succes. I downgraded the room to CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, and other rooms too, but after starting lokwiz, program is waiting (i do not know for what)
www.foony.mscnet.sk/vario.jpg
www.foony.mscnet.sk/vario1.jpg
how long does it take the unlock process?
any advice please to unlock it?
I have active sync 42.
thanks

Unlocking T-Mobile vario (Wizard) 1.6.2.2 NLD

Hello everyone,
I have been using this sit for several years now. qtek 1010, 2020, s100 and this is the first time i encounter real problems with unlocking/ upgrading my device.
I have tried unlocking with Lokiwiz 1, 2 a,b, 3 and 3a. None of these programs worked well. I have followed al the instructions and copied the .cab to my device. I have installed the latest version of activesync. I have placed all the files on my c: and executed the .bat file.
I am running WM5, but this should not be a problem i geuss?
When i use lokiwiz 3 & 3a i see that the Rapi is unlocked but i dont get an unlock code.
Can anyone help me?

Same problem here, though i cannot get the CID lock out of it.
Anybody? help! :?

Electrostar said:
Hello everyone,
I have been using this sit for several years now. qtek 1010, 2020, s100 and this is the first time i encounter real problems with unlocking/ upgrading my device.
I have tried unlocking with Lokiwiz 1, 2 a,b, 3 and 3a. None of these programs worked well. I have followed al the instructions and copied the .cab to my device. I have installed the latest version of activesync. I have placed all the files on my c: and executed the .bat file.
I am running WM5, but this should not be a problem i geuss?
When i use lokiwiz 3 & 3a i see that the Rapi is unlocked but i dont get an unlock code.
Can anyone help me?
Click to expand...
Click to collapse
This is is what happens

Am i stupid or what I only got the Vario for a few days, and i immediatly put the new rom over it (2.21). That rom causes the CID from getting unlocked.
Are their people working on that for as far as we know?

[edit]
sorry, double post
[/edit]

try this to unlock your mda
http://forum.xda-developers.com/viewtopic.php?p=185735#185735

Alpha Release for HTC IMEI Restore Wizard

Hello,
Here's some concrete work from the IMEI update project.
Please use the attached file and report your findings here.
Instructions:
1. Extract the ZIP
2. Run the file iWizard
3. Make sure ActiveSync is running and your phone is connected via USB
4. Make sure Windows Mobile has finished booting
5. Click "Next" in iWizard, let it work (shouldn't take more than 10 seconds)
Let us know:
1. If iWizard worked:
a. The model of your phone
b. The IMEI # and checksum codes if you like (you can PM for your security)
2. If iWizard failed:
a. How it failed
b. Any error messages, or screenshots of failure
c. The model of your phone
The goals of this alpha release are as follows:
1. To determine which HTC phone models work with our method
2. To determine the algorithm of the IMEI checksum codes so we can update
Thanks for your interest!
Don't get too excited - this alpha release does NOT change your IMEI yet. That is coming soon, as soon as we know which phone models the above method works on and is reliable with!
Note: The iWizard works great on my i-mate k-jam.

I tried this a minute ago.
My qtek 9100 is connected to my pc, can synchronise with active synch but I received the error message I attached.

I have spv m500, its synchronized with my pc, but I recive the same error as canstb said...

sorry for my first quick reply.
I was thinking that my qtek9100 was cid unlocked apparently it was not. I used the tool lokiwiz v2b to unlock it and ran your program again.
and here is the result.

Thanks, please keep the results coming in! We'll figure what the checksum alg. is and then fix your phones :lol:

Guys, I think you should PM Sinan rather then publically posting your IMEIs.
As we all know, cloning and changing IMEIs may be illegal in your jurisdiction; additionally, publically posting your IMEI is liable to end up with it being cloned by thieves not from this board etc. Not wise, so be careful, and please stay legal.
V

thanks for your warning.
sinan, I am deleting my attachment to my previous message. if you need the info again, just ask for it.

can anyone tell how to download lokiwiz, and how can i find out if my Magician iz CID locked or not?
and is there any tool for unlocking SPV m500 (magician)?
thnx

Yes, can you please PM it? Also, did the tool accurately detect your real IMEI?
Everyone, please PM your IMEI and checksums for security...or if you're not comfortable with that, please just say if the tool correctly detected your IMEI on your phone model, and report the phone model.
aWizard/Lokiwiz can be used to CID unlock phones, available here on this forum as well...pretty easy to find and use them, they're free tools as well.
You may need to downgrade your ROM first...

i used lokiwiz to unlock my device, now some other message appears, here is the pic... and the program doesent stop, it tries to find imei, but it seems like it will never stop...

Is this on Vista? Please see if it works on a regular XP box...if not, thanks for letting us know, be sure to try with the next alpha.

no its not vista, its just a theme for xp.
so you think there might be a solution for my device to?

Was the unlock successful with the CID unlock tool?
I think you may need to downgrade your ROM and CID unlock your tool first.

According to what I've read in another discussions, this tool would work only on devices that store IMEI on DOC chips
These are - nearly all smartphones produced by HTC, and communicators like HTC Wizard and Prophet. The tool would never work on HTC Himalaya, BlueAngel, Universal, etc.
You can easily determine would the tool work on your device or not. Just take the ROM update tool, extract it with WinRAR. If it has the file "radio_.nbf" - the tool would not work at all.
The tool should not be called "HTC IMEI Restore Wizard" as it does not support all HTC devices. It should be renamed to something like "HTC IMEI-on-DOC Editor tool".

mimarsinan said:
The goals of this alpha release are as follows:
1. To determine which HTC phone models work with our method
2. To determine the algorithm of the IMEI checksum codes so we can update
.
Click to expand...
Click to collapse
it is easy to determ which models work, just buy all the HTC devices and try yourself and you will know. I am doing same thing, since i don't want risc affect any of the users phones.

chunky charly
Rascal you sound like a baby. We should try to help each other, not put each other down. And remember business is business! You couldnt have thought that you would be the only person that could provide a imei repare tool forever!!
Maybe now you will drop the price of your dongle or even better, make the program work without the dongle!!
Hopefully the release of mimar's tool will drive you to produce better things.

AFAIK the Wizard has a radio rom file, doesn't it? I've used the tool on my Wizard just fine.
Raskal, tale the suggestions of our good friends here - update your obsolete sales mechanism, get rid of the pkey dongle, that will probably be the only way for you to remain competitive.

Great work MimarSinan
thanks for share and not change a my device imei ..
my device : HTC Magician
device name: MDA Compact

Your device is CID unlocked, right?

Leerim said:
I have spv m500, its synchronized with my pc, but I recive the same error as canstb said...
Click to expand...
Click to collapse
The spv M500 is a Windows Mobile 2003SE device. As far as I am aware this tool is for Windows Mobile 5 devices.

Alternative Super CID - SPV Developers down?

Hi folks, i'm trying to upgrade my C500 to WM6 but am failing at using the SPV-Services superCID as the website seems to be down. Is there an alternative way to superCID my C500?

Ahh, found some instructions here:
http://www.geocities.com/gggbitonti/typhoon.htm
that doesn't need the SPV-Services program

TyphoonNBFTools in crash
TyphoonNBFTools crash! Give me an error (debug of windows). no solution ?

trying to unlock c550
Im trying to unlock a spv c550 but having trouble with the last part, I can get the cert cab installed but cannot unlock.
The bootloader is hurricane not typhoon can someone help please.
Cheers
Fermec

the C550 isn't a typhoon it's a huricane, you are better off asking the question in the huricane forum

GordonCopestake said:
Hi folks, i'm trying to upgrade my C500 to WM6 but am failing at using the SPV-Services superCID as the website seems to be down. Is there an alternative way to superCID my C500?
Click to expand...
Click to collapse
The service should be back up now.

Hi ,
Mates , it's still Down !!
any Ideas ?alternative ones :S . .
Please help . .

On Kar-Hoe pages in tutorial is second alternative how to unlock your Typhoon, look link:
http://karhoe.net/content/view/35/1/
* If you cannot use SPV-Developers SuperCID tools, download this tool and use the alternative method. Then do the following.
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit

erik.aragorn said:
On Kar-Hoe pages in tutorial is second alternative how to unlock your Typhoon, look link:
http://karhoe.net/content/view/35/1/
* If you cannot use SPV-Developers SuperCID tools, download this tool and use the alternative method. Then do the following.
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
Click to expand...
Click to collapse
Sim lock remove ?