Database Users

A combined Desk/Car Cradle Solution I use

There are a limited number of mounting solutions available for the Wizard, particularly for mounting with the keyboard open.
I have found a flexible solution from Brodit which works for me for use in the car and on my desk with the device keyboard open (a keyboard closed solution is also available for those who prefer it).
Below are the pictures and links for the components I used.
They comprise of
1: A Screen mount (although a dashboard grill mount is also available for individual makes of cars I chose the screen mount because I did not like the idea of the device being to close to the heater vents).
2: A Horizontal cradle (although they also do a Vertical one).
3. A pack of what they call 'Move Clips'.
The move clip pack comes with 3 parts - 2 Male and 1 female - as seen in the first picture and here http://www.dsldevelopments.com/moveclips.html
The male is attached to the back of the cradle, and one female is attached to the Screenmount.
When the screenmount is placed in the car, the cradle can now be attached and removed from it very quickly and easily.
The second female clip I have attached to a moveable block on my desk, so when I am not in the car I can mount the cradle on the block for desktop use. I could have just stuck the second clip to my desk, but chose to mount it on a block so I could move it about easily.
Althought they have a cradle option with USB car charger included (Active Mount), I chose the 'Passive' holder and use it with the charge/sync cable that came with the device as I don't have anywhere to connect a cigarette lighter charger in my office.
To see the mount options go here http://www.dsldevelopments.com/pdaholdersearch.asp and search for HTC Wizard, and here is direct link to the screenmount http://www.dsldevelopments.com/suctionmount.html - shown with an example cradle attached
I understand from various posts that this solution is not available everywhere at the moment but this company will ship overseas for those who can't locate the parts in their own country. Postage is reasonable, but e-mail them for a quote.
NOTE: I have no association with the site at the links above - I just used them and found them very helpful.

Handnav also provide a excellent Suction Mount unit that works really well with the Brodit equipment.

How did you place the move clip into the back of the screen mount??

Both the screen mount and moveclip have very strong double sided tape already fitted which seems to adhere very well.
However if ever necessary the tape can be cleaned off with spirit and super glue could be used to attach the clip.

Handnav also provide a excellent Suction Mount unit
Click to expand...
Click to collapse
They do two, one that is the same mount shown above - it is made by Brodit, and a second which is a Dashboard mount and is shorter but does not have a flat mount plate from what I can see.

Here are some update pics.

Is the car mount "Brodit Proclip" any good?

I am trying to figure out, which car mount works best with the Jamin/s200?
I am thinking about purchasing the Brodit Proclip from www.proclipusa.com - is anyone using this car mount with the Jamin/s200?
Proclipusa.com has a device holder for the Jam/s100, which is 100% compatible with the Jamin/s200, correct??? :?:

yes, they are very good. At least I think so.
See responses to your post on HoFo

You can't go wrong with the brodit products. They are a little pricey but top quality. I have got the active swivel holder for the qtek s200 and it works very well indeed.
Just buy it you won't have any regrets.

Very impressed with mine also, a bit pricey but good quality and made for a neat installation.

Which option are you guys using?
The holder, which fits into the center console or the one for the air vent?
Also, if I have multiple devices, is it a rather easy task to switch out the device holders (I guess, I can use one mount for different holders, correct?)?

Hi,
You can use a 'Moveclip' This enables you to have x1 Proclip installed on your dash area, and fix the moveclip female part to the Proclip, and the x2 male parts to the back of 2 Brodit holders, meaning you can switch devices on your dashboard, be it JAMin or Tomtom, ipod etc.
Hope that helps, heres a link to view:
Cheers!
http://www.dsldevelopments.com/hotpages/march06/minimoveclips.html

Thanks bryson!
Perhaps you also know if I can put in a car charger into the non-active holder (directly into the device) without any trouble?
The active holder seems a little big and I dont really see the advantage on the picture compared to the non-active holder?
Whats the advantage of the active holder?
Thanks!

No probs, glad to advise:
If you already have a cigg lighter charger for your device, then the passive holder is your cheapest option. Its easy to plug it into your JAMin (UK this is known as the Xda Neo) just plug into the bottom and slide it into the holder, job done!
The advantages of charging holders are:
It has the dock connector so just slide the device in and job done.
If you dont have a in car cigg charger, active holders are your best option,both for practicallity and cost.
Other than that, the 'hardwired' versions are a bit different, (also more expensive) as you can hide the cables,power a GPS BT device and have a more pro install look in your car.
Click the link here for all the devices available for JAMin etc
http://www.dsldevelopments.com/hotpages/march06/xdaneo.html
Hope that helps, Bryson!
Quote:
Thanks bryson!
Perhaps you also know if I can put in a car charger into the non-active holder (directly into the device) without any trouble?
The active holder seems a little big and I dont really see the advantage on the picture compared to the non-active holder?
Whats the advantage of the active holder?
Thanks!

FOR SALE DAMAGED Vodafone 1605v (HERM200)

Hi,
My Hermes had a fight with the floor and came off worst; the screen is damaged, back is very scuffed, scratched camera lense, usb slot damaged. Was upgraded to latest HTC OS, ext & Radio ROM's. Fully boxed, instructions and CD-Rom included.
Oh, also includes in Brodit Proclip car holder and charger. The holder is two parts, one part Hermes specific and one part car specific. I'm including it all but the car part my be of little use as it was for a Lotus Elise.
Any offers?
thanks
Rob

Where do you live
Where do you live?
I live in Holland. Maybe I am intrested.

Raphael car mount that lets keyboard open?

Does anyone know of a car mount for the raphael that lets the keyboard open while it is in the holder?
My Brodit holder for my Kaiser does this and it is great for TomTom when you want to type in an address or a postcode, I would rather not have to take the phone out of the holder to do this.

Just wait for Brodit. Fabrication in progress.

Brodit are doing a new one? The current ones on their site for the raphael do not allow the keyboard to open while in the holder.
On the plus side, at least they now do a 3-in-1 holder that splits out the USB and headphone sockets.

Bought one from ProClip USA. I believe it is manufactured by Brodit due to decals attached to many of their products I have bought.

evilc said:
Does anyone know of a car mount for the raphael that lets the keyboard open while it is in the holder?
My Brodit holder for my Kaiser does this and it is great for TomTom when you want to type in an address or a postcode, I would rather not have to take the phone out of the holder to do this.
Click to expand...
Click to collapse
http://www.proclipusa.com/core/fram.../devicecradle/848853.jpg&width=480&height=480
This for the Fuze.
Beachboyde

Hmm, I was looking for one that offered the same functionality as the one I modded for my Kaiser.
With that one I just need to slide the phone in and it automatically connects to power and audio. Plus I can have the phone closed and slide the phone open while it is in the holder and swivel it between landscape and portrait.
Doesn't look like this is going to be possible, at least the new brodit active holder has a built in 3-in-1 dongle. It don't let you open the phone but I would rather automatic connection to power/audio than letting it open in the holder.
Either that or I will break out the polymorph and try and fabricate one myself.

Active Mount Wishlist for Fuze / Touch Pro

I have an AT&T HTC FUZE, and this is the car mount I wish existed. If it does exist, can someone tell me where I can get it? If it doesn't exist, can anyone with the right connections recommend it? (*cough* Brodit?)
I would love an active car mount that mounts into the cigarette lighter. I've seen one universal cigarette lighter mount, but it doesn't actually function as a charger. I would also love it to have a 3.5 MM jack, so I can plug it into the AUX of my truck and listen to music as well.
Anyone think this will get made? Seems like a very logical design, so you don't have to mount it to a windshield, and it can be easily transferred to other vehicles.
Here is a link to the passive version as an example. Obviously it doesn't have a 3.5 MM jack either.
http://store.everythinghtc.com/igrip-universal-fit-cigarette-lighter-mount/3A78A1740.htm
On a side note, what's with there being no desktop cradles that give you a 3.5 MM jack? If you put the phone on a cradle, it's impossible to hook it up to speakers without it.

Is there anyone else that would want a mount like this? If no one replies, I guess there is no market for it.

Desktop charger here: http://cgi.ebay.com/USB-Desktop-Bat...14&_trkparms=72:1205|66:1|65:12|39:2|240:1318

kennyb123 said:
Is there anyone else that would want a mount like this? If no one replies, I guess there is no market for it.
Click to expand...
Click to collapse
I dont see a huge market for it since many people like there phones at vent level (think nav), not near their knees.

I would like such a car cradle. It eliminates the unsightly wire to a distant lighter port. If the neck were long enough, it could extend to vent level. Somebody please make one for the Fuze!

Have you checked http://www.proclipusa.com/? They have several options for the Fuze. You then pair it with the vehicle mount designed for you vehicle. I have a Ford E-150 full size van and the vehicle mount for my vehicle puts my device at the perfect location. The vehicle mount snaps in place. They do not have a custom vehicle mounts for every vehicle, but if they do, it is normally in a good location.

Proclip USA carries them. They have several options available. Check the link in the post above.

You mean like this: http://www.griffintechnology.com/products/tuneflexaux
Since looking for one like this for my wife's iPhone (which they didn't have at the time but now there's a few) a while back I wanted to get it for my iPod but now I'm badly wanting one for the Fuze. I've searched high and low since getting my Fuze but I just don't think it's out there or is going to come out. I think I might settle for the console mount Proclip since it mounts right in the area I like, near the power socket.

SH06UN said:
You mean like this: http://www.griffintechnology.com/products/tuneflexaux
Since looking for one like this for my wife's iPhone (which they didn't have at the time but now there's a few) a while back I wanted to get it for my iPod but now I'm badly wanting one for the Fuze. I've searched high and low since getting my Fuze but I just don't think it's out there or is going to come out. I think I might settle for the console mount Proclip since it mounts right in the area I like, near the power socket.
Click to expand...
Click to collapse
EXACTLY LIKE THAT!!! Well, it's good to know the idea has been designed and sold for the Iphone, but unfortunately, they get all the accessories in the world to choose from, and the Fuze gets very few. Here's to hoping someone snatches up this idea for the Fuze.

FUZE Active Mount w/3.5mm out AND Open/Close Keyboard
I would like to add the capability to flip the phone horizontally and open the keybaord while not having to take the phone out of the mount. Does anyone think there could be such a thing? Can there be if not?
Chris