Hi to all
Just to let you know that i managed to get Destinator PN working on jasjar in true VGA mode.
How:
1º Install the destinator on device via setup / activesync.
(You should have the installation files copies form a w2003 device.)
2
Copy the files (exe and dll's) from the 2003 device.
From \DestinatorApps\Destinator to \DestinatorApps\Destinator
Create a shortcut of destinator exe on the start menu and is runing
Now the problem is that you have huge buttons………….. its no use...
For everyone used to vga devices (my self toshiba e800) you should know the reshack solution for true VGA on windows2003 SE.
(see the e800 forum on brighthand.com)
So open destinator exe on the pc with reshack
add the vga resource
copy it back to the jasjar
and it’s done...
The problem is the same as with 2003 in true vga the status bar appears on the midle of the screen
Screen shot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fcaeiro said:
Hi to all
Just to let you know that i managed to get Destinator PN working on jasjar in true VGA mode.
How:
1º Install the destinator on device via setup / activesync.
(You should have the installation files copies form a w2003 device.)
2
Copy the files (exe and dll's) from the 2003 device.
From \DestinatorApps\Destinator to \DestinatorApps\Destinator
Create a shortcut of destinator exe on the start menu and is runing
Now the problem is that you have huge buttons………….. its no use...
For everyone used to vga devices (my self toshiba e800) you should know the reshack solution for true VGA on windows2003 SE.
(see the e800 forum on brighthand.com)
So open destinator exe on the pc with reshack
add the vga resource
copy it back to the jasjar
and it’s done...
The problem is the same as with 2003 in true vga the status bar appears on the midle of the screen
Screen shot:
I followed your instructions but probably made some mistakes because the problem was not involved.
Could U go into details about the reshach process? How did U add the vga resource?
THX
Click to expand...
Click to collapse
Related
Hi!
Do you know if there is a working x86 emulator for our pocket PC devices?
I don't need speed, just compatibility. I'd like to use some special tiny program, that was written for windows 95, on my Wizzard.
I know some guys were installing some old "ordinary" windows on pocket pc devices, so there should be hope for me?
any information welcomed.
greetings from slovenia!
Admit it, you just want to play Star Flight.... I miss that game
Mamaich has a working version of Bochs I think, on his website. However, I don't think you'll get windows installed.
Where have you seen old windows binaries running on the PDA?
V
Veloxi on the WM platform...I'd buy that for a dollar!
I just have to add this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And this:
V
I saw a russian site where they guy had a dos emulator. but I do not belive it emulated the hardware needed for Win95. You are better off with a terminal service session on WinVNC, which I ise from my phone to a server in my data center.
I found this site (in German) showing pics of working windows 95 on a PPC:
http://people.freenet.de/renmi/ppc/
now we just have to find some manual describing how to do that
best
LOL...that looks cool but man, that has to be slow! Should be interesting to see what comes of it.
Guys, you can see that it says that it uses Bochs. As I said above, I think Mamaich has a release of it, or at least it should be generally available. That's a free, open source x86 emulator.
V
bochs - failure
hi. I am trying to play with bochs and dlxlinux
I have downloaded everything needed [except bochscr.txt - cant find it] but I think bochsrc.bxrc included with dlxlinux is good for me.
when I try to run it from dos box [functionality of pocket contoller] cpu grows to 100% for 1-2 sec and falls back to normal[0-3%].
every configuration I try cause same effect. on dos box nothing happens. no log produced [it is in configuration].
any ideas? anyone tryed it with success?
I run it with ..\bochs -q -f bochsrc.bxrc. ofcourse all files are correct.
Files are from http://mamaich.uni.cc/fr_pocket.htm
1. download the file "screenrotate.zip", then decompress it
2. then you will see three files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. use resco registry to import "1.reg"
4. copy another 2 file to the device folder "windows"
5. reset the machine, FINISH!
original link here:
http://www.hkppc.com/bbs/viewthread.php?tid=5166&page=15#pid35280
xelashiu said:
1. download the file "screenrotate.zip", then decompress it
2. then you will see three files
3. use resco registry to import "1.reg"
4. copy another 2 file to the device folder "windows"
5. reset the machine, FINISH!
original link here:
http://www.hkppc.com/bbs/viewthread.php?tid=5166&page=15#pid35280
Click to expand...
Click to collapse
What are the registry keys please - many will want to do this manually and dont like importing reg keys.
Cheers
xelashiu said:
1. download the file "screenrotate.zip", then decompress it
2. then you will see three files
3. use resco registry to import "1.reg"
4. copy another 2 file to the device folder "windows"
5. reset the machine, FINISH!
original link here:
http://www.hkppc.com/bbs/viewthread.php?tid=5166&page=15#pid35280
Click to expand...
Click to collapse
it doesn't function on my orange m3100. Thanks
[HKEY_LOCAL_MACHINE\Services\ScreenRotate]
"ShowIcon"=dword:00000001
"InitDelay"=dword:00003A98
"Description"="ScreenRotate Service"
"DisplayName"="ScreenRotate Service"
"Context"=dword:00000001
"Keep"=dword:00000001
"Order"=dword:00000008
"Index"=dword:00000003
"Prefix"="AP1"
"Dll"="ScreenRotate_Service.dll"
Click to expand...
Click to collapse
I don't see the fuss about the rotate icon. You could write your own in 5 minutes or less.
V
Thanks V - i dont know about 5 mins - maybe for you being a wizzo programmer and all! But for the rest of us 5 days more like
kool neat although there isnt too much need for the button, seeing as however you use the device it auto rotates the screen and it gets it right
one question... what is that theme??? it looks amazing! i want i want!! ... ahem... i mean, what is its name and where can it be found? (sorry about deviating, but i must know!!)
Anyway, as a passerby, just want to help someone here being not answered thoroughtly, such as follows:
http://forum.xda-developers.com/showthread.php?t=284977
http://forum.xda-developers.com/showthread.php?t=275341
Be friendly, be happy!
Nice to meet you here!
Hi,GilesTheAlmighty
The theme you needed here. It is done by my buddy-Kicd!
And you can download many beautiful themes from my friends in www.hkppc.com
Doesn't work for me
I tried this screen rotate fix on my TyTn (HTC Rom 1.35), and it doesn't work.
I looked at this, but quite frankly there are so many apps that include this as an included feature...
It does't work on my TyTN (ROM 2.11.258.1) ... Neiter the xelashiu's solution, nor vijay555's registry keys...
Is there a solution?!
Dear All:
We need test for our new products on Windows Mobile 6.0 and 6.1 devices.
iGate is small piece of software to replace system idle screen,
When you active system password and after device unused for predefined time, the idle screen will appear. Simply, iGate replace this screen and show iGate screen with necessary information as:
- Unread Mail
- Unread SMS
- Misscall
- Battery status
- Battery and signal levels
- Nearest appointment
- Owner Information
- Able to call to emergency number
Please follow below steps to test iGate:
Currently, iGate is working on Windows Mobile 6.0 or 6.1 only
1. Disable System’s password
2. Download iGate at:http://www.ppclink.com/download.php?id=1
3. Install iGate to your device, After installing please go to Start menu>> programs folder and then run iGate’s settings
3. Tap on Set up password and set the password and time to active iGate.
4. Wait for time out to see if iGate can active and enter password to see if it can go-in.
5. please send report/ comment to [email protected]
Thank you all very much for help us to test iGate.
Screen shot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ill try now
just installing now
will let you know how it goes over the weekend
thank you
liamhere said:
just installing now
will let you know how it goes over the weekend
thank you
Click to expand...
Click to collapse
Thanks so much for your help
Best,
can't install cab
not signed or parts missing
exe file
if you install from desktop win32 don't allow this file
liamhere said:
if you install from desktop win32 don't allow this file
Click to expand...
Click to collapse
You can get the CAB file here: http://www.ppclink.com/files/beta/PPCLink_Software_iGate.cab
thanks for the cab
on the phone and testing
THANK YOU
hi guys i have this program extracted from my friend touch dual
it let you scroll and view your programs folder very fast and smooth
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Name : htc programs
Size : 150kb
Info : 3X FASTER than the original program folder
Comparing Video : http://www.youtube.com/watch?v=YWlZC_ZPIXA
so now i need your help to change the original programs folder path to this EXE
YOU NEED TO TRY IT
installing: unzip it and copy it anywhere in your diamond and make shortcut to startmenu
Very smooth indeed. Nice one mate.
Got a question though. How do you create a shortcut in the start menu to a program like this that hasn't been installed?
look at this - Link Creator 1.3 ... it should do the job... (if u are using english rom)
Wonderful
Is there the settings.exe?
I think this is the same as something that should already be on your phone. Check in \Windows for a file called folderview.exe (it's on my Fuze and I presume it's in Diamond's as well). I've seen this in the past since the tweak to get 4 columns in the programs directory will not work for this file. What I've done n the past is set this as a soft key to make it quicker to get to.
Aqrab said:
so now i need your help to change the original programs folder path to this EXE
Click to expand...
Click to collapse
Renaming this file to folderview.exe and cooking it in the ROM overwriting the existing file wont help?
DevilzGtr said:
Very smooth indeed. Nice one mate.
Got a question though. How do you create a shortcut in the start menu to a program like this that hasn't been installed?
Click to expand...
Click to collapse
use resco explorer
1-hold on the file you want to make shortcut for
2-a screen will popup
3-press send/send to startmenu
wow thanks for this! makes such a big difference
Where did you get the background from?
Thanks guys for the solving my shortcut program. It was really bugging me that I didnt have a shortcut to the TomTom 7.9.
I am trying to install the registry editor PHM Reg Edit. I've copied the MSI file I downloaded to the memory card but when I click it I get this message - There is no application associated with PHMRegEdit.
Any ideas? Do I need to install an unzip program?
Run the MSI from your pc with the phone connected - it will install it on your device. You can only install files on your handset via .cab files.
ftr2k8 said:
Run the MSI from your pc with the phone connected - it will install it on your device. You can only install files on your handset via .cab files.
Click to expand...
Click to collapse
I did try that first and it installed on my PC but not the phone? I can't find it anywhere!
I'm connected via active sync, I'm assuming that's right?
Pezza4u said:
I did try that first and it installed on my PC but not the phone? I can't find it anywhere!
I'm connected via active sync, I'm assuming that's right?
Click to expand...
Click to collapse
Well, then you should be prompted with the choice of installing the software...Anyway, if you run the msi on your PC, you now have somewhere on your hard disk, the cab for regedit, you can copy it to your SD and install it from there directly on the HD2
you could also download the cab instead of the msi
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
pat12 said:
Well, then you should be prompted with the choice of installing the software...Anyway, if you run the msi on your PC, you now have somewhere on your hard disk, the cab for regedit, you can copy it to your SD and install it from there directly on the HD2
Click to expand...
Click to collapse
Yes I'm prompted but doesn't give the option to choose the phone. After installing it on the PC I tried running setup and I get a box popup asking me to add/remove programs on the phone?
Screenshot below are the files that it's installed on the PC, nothing is on the phone?!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could really do with some help please
I've tried installing it on the PC and on the phone and it doesn't seem to be working?!?!
pat12 said:
you could also download the cab instead of the msi
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
Click to expand...
Click to collapse
Sorry I missed this post, had the thread open when I posted the one after. I've downloaded and installed that ok...thanks