Related
Hi,
Ok after the breakthrough regarding the ROM updates for QTEK 1010 and it was first revealed here on xda-develpers.com we have some new options in the QTEK now one of them is the WM.
Did anyone manage to use the Wireless Modem via IRDA because its not working the first thing is that the computer is seeing the device on infrared but not as a modem and i dont have an *.inf file to indentify it. If anyone managed to use his QTEK or any XDA via infrared to connect his laptop to the internet using GPRS plz explain how.
thanks
to irda on win2k/xp
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Ummm its a good idea but i am not sure if this will work on Windows XP... what do you think?
it does
it does, but as with all things apply with care
Tried it
I tried this a long time ago, IRCOMM2k works on XP but the problem is that i couldn't figure out how to setup a IR generic Modem working on that port.
Yes please, this is a good article,
I installed the ircomm2k on my XP, but how to configure the connection from my laptop to connect to the internet via my XDA PDA as an external modem?
to setup xda as a modem
1. Install Ircomm. note which com port is assigned as permanent.
2. Add new modem: standard 33600
3. Select com port from item 1 as the com port of choice
4. Edit modem profile in devices settings, in Extra Initialisation Commands add AT+CGDCONT=1,"IP","apn name"
5. VERY IMPORTANT: set flow control to OFF
6. Set port speed to 115200 ONLY
Set up a Mobile Web net connection as per your operator
Select your above modem
Align xda with irda port; select start on Wmodem app
Double click Mobile Web connection.
Surf. It's OK but not as fast as a GPRS card.
OR you can wait for O2 to eventually post some instructions...
Thank you very much for your feedback
I did all what you asked me to do, but its not working it gave me an error message:
Error 692: There was a hardware failure in the modem (or other connecting device).
I replaced AT+CGDCONT=1,"IP","apn name" BY AT+CGDCONT=1,"IP","apn01" same as Im using in my PDA. Am I right?
Something I didn't understand in your reply:
(Set up a Mobile Web net connection), you mean a normal dial-up connection?
One more thing, what do you mean by (select start on Wmodem app)?
Do I have to do anything in my PDA before I connect from my laptop? or do I have to do anything in my PDA configuration or connections settings?
Please help me, I want to use the Gprs on my laptop, no need to pay for 2 services, one for the PDA and other for my laptop
Best regards, Ali Alsaffar [email protected]
"select start on Wmodem app" - this means go into the Wireless Modem application on the xda, select IrDA (if thats now you are connecting) and then tap the Start button.
When you've done that, go the the DUN connection on laptop and connect as you normally do.
Unfortunatly I dont have "Wireless Modem application" on my XDA from where I can get it?
I thought the command was:
AT+CGDCONT=1,"IP","apn name","",0,0
I don't know about the command but what Im sure about it is that wModem application is mandatory, so from where I can get it?
Re: to irda on win2k/xp
guest said:
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Click to expand...
Click to collapse
HI. I HAVE AN OLDISH LAPTOP RUNNING WIN ME. WILL IRCOMM2K WORK ON ME OR IS IT INTENDED (AS NAMED) FOR WIN 2K AND XP ONLY?
From: Helpdesk (source O2) Sent: 30 May 2003 13:54
Subject: RE: wireless modem
Hi
The wireless modem will be available in the next ROM update from the xda team. I understand that this will be released in the next couple weeks - they are in the final stages of testing.
We will highlight the new ROM on our homepage with a link to the downloadable files.
regards
source O2
Re: to irda on win2k/xp
Anonymous said:
guest said:
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Click to expand...
Click to collapse
HI. I HAVE AN OLDISH LAPTOP RUNNING WIN ME. WILL IRCOMM2K WORK ON ME OR IS IT INTENDED (AS NAMED) FOR WIN 2K AND XP ONLY?
Click to expand...
Click to collapse
Hmm... really good question. ME is an update to 98 as I recall, but a clunky upgrade.
Way to check: Setup a new modem. When it asks which COM port you wish to use, if you can select Virtual Infrared COM port then it should work fine.
Get the instructions at www.o2.co.uk/xda on Help and Support.
Anyone know what the T-Mobile USA network connections for using WModem are?
For UK O2 they are:
Primary DNS - 193.113.200.200
Alternate DNS - 193.113.200.201
User name - O2Web
Password - password
Has anyone used wmodem in the US with T-Mobile as a service provider?
Thanks,
JP
Qtek as wireless modem
I also have oldish ME Laptop computer. I did exactly as described on O2 support site. It does not work. The modem on laptop immediately disconnects saying it's not responding properly.
I have tried several cooked versions of the 4..00.16 Eng T-Moble and the 4.00.11 ENG WM2003 roms and niether one installs the WModem app. Any ideas why?
I have a T-Mobile version of the PPC, radio stack 6.24
WM with old laptop computer
It worked for me. I could connect my oldish ME notebook computer to internet over gprs using WM in xda. I used the extra string from o2 and just changed the access point name.
It goes as this:
AT+CGDCONT=1,"IP","apn"
It works, but the WM just stops responding the moment you disconnect the connection from PC. The PC waits and waits for the confirmation and then hangs up saying no reponse. But as long as you are connected it works very well.
Using GPRS/EDGE as a Modem to access internet with Desktop/ Notebook Computer
When I need to connect my Notebook to the internet, I always prefer Wifi or Broadband line. If no such medium to connect internet, I will use PDA and USB cable. First of all, you need a modem driver for Windows 2000/XP and a simple dial-up utility. Both files are available here: USB Modem. It is a zip file and has 2 files, (1) USBMDM.INF, (2) USBModem_Dialer.exe. Just download them and unpack to you Desktop/Notebook. Second, you must set the partnership to your Desktop/Notebook first before proceed following set up.
Go to program and run “Modem Link” and set the connection type. In this case, choose USB and APN and tap on the Activate button (In my example, APN is Peoples.net). The device has switched to the modem mode and is ready to connect.
Photo 1 -3
At the moment you connect the PDA to a desktop or notebook over USB cable, the computer will connect the PDA. Let the system work until you see the Photo 4, select third options as red arrow, click Next.
In the next dialogue Photo 5, you can see that the new device is called HTC USB Modem. Even though the system offers to do this for you, you'd better select the second option as red arrow to be able to select location of the driver manually.
In the next dialogue Photo 6, choose the folder where you have unpacked USBMDM.INF from there archive and click Next to continue. The system will be working and configuring for a while. If no problems occur, you have installed the modem successfully.
Go to your desktop/notebook, double click USBModem_Dialer.exe that is part of the zip file you had previously unpacked. (Photo 7) As you see the APN must same as PDA one. (In my example, APN is Peoples.net) Click Dial.
Done. You can surf internet with you desktop/notebook.
Important : The key of this setting is that the APN for PDA and Notebook/Desktop must be same. The name of APN which you can ask the services provider.
Please note that all photo is not mine but I tested on my 818pro & Wizard and Notebook and work fine
Great info! I use my qtek9100 and T-mobileGPRS every day for this purpose. Only thing that is different is that I use the standard Dailup Networking of XP. You don't need to specify a APN but you have to fill in a number to Dial: *99#
I tried the above on my O2 XDA Atom and it didnt work, first in the PDA I was unable to select th APN (the dropdown list was empty). second thing is on my laptop when i tried to select the USBMDM.INF the laptop rejected it as unfit for the hardware.
help.
Hi all.
I'm not able to enter the APN number in my Dopod 818 Pro too. Any ideas how?
this is what i did on my O2 mini:
i. Installed USB Modem dialer on my notebook.
ii. Before connecting the PDA: Disable allow USB and allow Network checkboxes on Microsoft ActiveSync Connection Setting.
iii. Go to Task Manager on the Notebook. Disable all WCExxx processes.
iv. Create Dialup Connection as you create for normal dial up phone connection: No username or password: Dial up no *99#
v. In your PDA, Open Wireless Modem: Click at Start.
vi. Connect your PDA to notebook using USB cable.
vii. Changed modem properties at dial up connection to HTC modem.
viii. Proceed with dial up.
so far it works for me...
pls help
the device already switched to modem mode and connect to decktop,
but the desktop cannot detect to 838pro.nothing detect new device.
and how to setting the partnership to your Desktop/Notebook first .
thankyou very much
fix apn
mcmug said:
Hi all.
I'm not able to enter the APN number in my Dopod 818 Pro too. Any ideas how?
Click to expand...
Click to collapse
hi,
u will not be able to change apn anyways.u can only see it.
1st u should setup to access gprs internet on your ppc. this u do by going to
start>settings>connections>add a new modem connection, under select modem, cellular line gprs, next, now enter access point name as given by ur gprs service provider [mine is airtelgprs.com, gprs provider being airtel bengalooru] ,next, username and password as given by ur gprs provider [mine is leave both blank] , finish.
now go to modem link in start, programs, u can see ur apn as u entered.
if u still cannot see, go to start,settings, connections, connections, advanced, select networks, under programs that connect to internet, select the name of gprs u entered in above steps.
now u can goback and see in modem link.
now without activating modem link, browse internet in ppc only to c if all is right with ur gprs. if sucessful, then close pocket ie, activate modem link, connect to desktop or laptop via usb cable, use usb modem dialer or create other connection with no. as *99#[which is better, since in usb modem dialer, u cannot save apn, have to retype everytime]
any problemo in setting up gprs connection in ppc , contact ur gprs provider for settings. make sure gprs works in ppc b4 u setup to work in desktop.
alternate methods to use wizard as modem would be to use bluetooth DUN, or try pdanet 1.7
I don't find any variations in speed in any methods, all r as gud or as bad.
after hard reset,i can connect to devicve.
when dial to connet to internet ,snow "remote access error 797"
pls help
thanks
my PPC (XDA Stealth) is already in GPRS/Modem mode. when i connect it to my laptop using the sync cable, my laptop automatically installed its drivers. it didn't ask me to specify which driver to install. when i run HTC USB Modem, it says No USB Modem.
hi..I hav everything installed properly n it was workin earlier n now when I try to dial up the connection, it says hardware failure of modem...when tried pdanet it always says modem busy...pls help...
any way to do this with a G4 ibook?
EDIT: Nevermind... I found it... it is working great with my 6945 iPAQ via Bluetooth, for free! If someone wants to check this, look over Here
Sorry i posted to the wrong thread.
WM6 HTC Tytn usb modem settings
Hi, in WM6 there is no Wireless modem icon and settings.
Modem is HTC USB Sync, not USB modem.
What can I do?
Thanks
Start internet sharing on the tytn and chose usb and then connect to your pc with usb cabel and thats it
sas90850 said:
... new device is called HTC USB Modem. Even though the system offers to do this for you, you'd better select the second option as red arrow to be able to select location of the driver manually.
In the next dialogue Photo 6, choose the folder where you have unpacked USBMDM.INF from there archive and click Next to continue. The system will be working and configuring for a while. If no problems occur, you have installed the modem successfully.
Click to expand...
Click to collapse
My XDA Atom is detected as a 'Windows USB Modem' rather than 'HTC USB modem' and the driver in the zip is not compatible with my device. Can anyone place the link to the driver file for XDA atom into this topic?
Is there any posibility to connect using HSDPA?
Because the subject specifically mentioned GPRS/EDGE ...
Thanks
I was searching for this solution some hours now...
Great fix!
Great!
Thanx!
Suberly simple and works perfectly!
Regards
wm6 sharing not as a modem, it sharing as a sharing device. i alos finding the driver.. but if you have install active sync b4, i can auto find a driver. but the driver how can i capture out? becuase if i connect to other notebook, it also ask me to install the driver
Still having trouble connecting
AndreyC said:
My XDA Atom is detected as a 'Windows USB Modem' rather than 'HTC USB modem' and the driver in the zip is not compatible with my device. Can anyone place the link to the driver file for XDA atom into this topic?
Click to expand...
Click to collapse
I have an AT&T/Cingular 8525
I'm still having trouble. I connect the USB cable (after selecting connect onthe Internet Sharing). When I go through the process and select the .inf file, my PC (running WinXP) says that the "file contains no info for the device". What's going on with that?
I've searched all over the net and downloaded the USBMDM.INF file from 100 different places (thinking they were just corrupt files) but to no avail.
Someone help, please!
Hi Guys,
I'm really stumped here, i have been on the www for days trying to findout how to get my Atom to work as a BT Modem for my PC. I keep going round in circles trying to locate the file USBMDM.INF but can not find this file anywhere. I have followed links to advise that i need to start "Modem Link" from program files but then i need the USBMDM.INF file to go to the next step....at least i think i do???......... can anyone help me to set up my Atom as a modem for my Laptop PC??
Thanx for any assistance that you can give.
instruction:
XdaAtom_Wireless.zip
Without pictures the instruction look like follows:
XdaAtom – Wireless Modem via Bluetooth
a.) Pairing Devices
1. To turn on Bluetooth on your device. Tap Start --> Settings --> Connection --> Bluetooth
2. Check on "Turn on Bluetooth" and "Make this device discoverable to other devices"
3. Tap on "Devices" and tap on "New Partnership..." to search for bluetooth devices.
4. Select your computer name and tap on "Next" to pair the devices.
5. Key in Passkey (for example "0000") and tap "Next" to continue.
6. On your computer, key in the same Passkey and click "OK".
7. On your device, check on "Serial Port" and click "Finish"
8. A partnership will be created on your device. Tap "OK".
b.) Disable incoming beam files
1. on your device, tap on Start --> Settings --> Connections --> Beam. Untick "Receive all incoming beams" and tap "OK".
c.) Disable Microsoft Active sync on your computer.
1. On your PC, launch Microsoft Activesync. Click on File Connection Setting
2. Uncheck “Allow USB Connections” and “Allow connections to one of the following” then Click “OK”
3. Microsoft Activesync is disabled.
d.) Configuring Modem
1. On your computer, click on Start --> Control Panel --> Phone and Modem Options
2. Click on "Modem" tab and select "Bluetooth DUN Modem" then click on "Properties".
3. Select “Advanced” tab and type in Extra initialization commands and Click “OK”.
** Depending on which service you want to create a connection to, you have to use the appropriate APN name and replace the “internet”. You may want to refer to your operator or its web site for the APN names.
e.) Create a Dial-up Connection
1. on your computer, Start Control Panel Network Connection
2. Click on “Create a new connection”.
3. Open the "New Connection Wizard" in XP and select “Connect to Internet” and click “Next”.
4. Choose “Set up my connection manually” and click “Next”.
5. Select “Connect using a dial-up modem” and click “Next”.
6. Tick on “Bluetooth DUN Modem” only and click “Next”.
7. Type in any name for your connection and click “Next”.
8. Type in Phone Number “*99#” and click “Next”
9. Type in Username and Password required (if any) and click “Next” then “Finish”.
10. Press “Dial” to connect to your modem connection.
11. If everything worked fine, you should able to get connected.
** You may want to refer to your computer’s Bluetooth software manufacturer for more information regarding to the dialing method.
f.) Disconnect Wireless Modem
1. To disconnect the connection, right-click on the dial-up connection and click on "Disconnect"
Thanx for the detailed set-up instructions Kropotov!
I follwed to the letter but at this time I'm still unable to get it all to work. When i enable the PC dial up connection it activeate the Atom cos the back light come on abd the BT symbol in the PC system tray changes colour. However it does not want to get past this stage and no signs of the GPRS sybol coming on the PPC...........I know my GPRS APN is "NET" with user name being the operator and the password being "WAP" but still nothing working. I just don't know why it should be so hard to establish a link via BT or USB cable. It was easier to do on my old Nokia 6030 about 5 years ago than it is on my Atom!
Regards
Chris.
try to connect to GPRS using USB connection...
Can you go to internet from your Atom?
How do I know which COM port the ActiveSync is using......would it be COM1 by default? When i try to set up a DUN modem the only ports that i can see are all Bluetooth ports that i have created, I do nt get the choice for COM1.
I also found some instructions from O2 on how to set up an Xda II to act as a modem, in these instructions you set up a new standard modem on the PC, disable Activesync on the PC then deactivate "Receive all beams" on the PPC and then activate "Modem Link" on the PPC. Then when you plug in the PDA to the PC via USB cable the computer will detect new hard ware and try to install a drive, I have not been able to locate the required driver o the internet so can not get any further with this method. The driver is on the OEM CD supplied with the device and as I'm away from home i can not check if i have the driver on the CD that came with the Atom. The driver i called "HTC USB Modem".
angusc :wink:
http://www.rapidshare.ru/27257
Kropotov,
I can't figure out how to download the file from this site, sorry to be such a pain.
http://dl.rapidshare.ru/27257/99530/USBMDM.INF
Thanx again for your continued support and assistance but that link is not working for me at this time, i will try it again later to hopefully get to that file!!
give me your mail. I will send you
kropotov,
Thx for the file, i installed a new modem on my PC and then activated the "modem link" on my PPC and installed the driver when prompted, but alas still not working. I think it is to do with the assigned COM port for the modem on the PC, I can only seem to choosE COM 4, 9, 13, 14, 15 when installing the modem to PC. I would think that the Atom would be com port 1-3 as it is connected to one of my PC USB ports......
Will keep playing and let you know if I manage to get it to work......Thanx for all your help.
Request Modem Driver for O2 XDA Atom
Dear all, Please anyone send me the Bluetooth modem driver, I just lost my CD, also the USB modem driver for O2 XDA Atom thanks alot
Cipto
O2 Atom
Request for BT modem driver
Hi, I'm looking for BT modem driver (.inf) to install in PC.
I'm using O2 Atom and my PC is Dell Latitude D420.
Thanks in advance for any help.
XDA Atom usb driver
Hi,
I'd like to know if somebody can send for me the drivers for my XDA Atom, because I don't have the original CD.
Thanx
Alvaro
xda atom driver
Hi,
I just found the correct drive for XDA Atom in the internet:
http://files.pdamobiz.com/Tools/atom_usbmdm.rar
I hope it help....
Alvaro
Is it possibe to use the usb/bluetooth modem to receive incoming connections?
Thanks.
Jebril can you pls send the same driver for my h/s ....Thanx.
Serial Port not appearing while teaming
Hi
I followed the following steps:
1. To turn on Bluetooth on your device. Tap Start --> Settings --> Connection --> Bluetooth
2. Check on "Turn on Bluetooth" and "Make this device discoverable to other devices"
3. Tap on "Devices" and tap on "New Partnership..." to search for bluetooth devices.
4. Select your computer name and tap on "Next" to pair the devices.
5. Key in Passkey (for example "0000") and tap "Next" to continue.
6. On your computer, key in the same Passkey and click "OK".
7. On your device, check on "Serial Port" and click "Finish"
My O2 Atom is not showing any serial port to select
any idea?
Regards
kropotov said:
instruction:
XdaAtom_Wireless.zip
Click to expand...
Click to collapse
Good work mate, but still wait for the laptop to come
Hi.
I have an ATOM and I would like to use my MacBook and my Laptop PC to connect trought the ATOM EDGE funtion using Bluetooth.
I can easly navigate in internet using ATOM internal browser and programs but I'd like to use as a modem it.
Can anyone explain me how does it work to connect to my 2 Laptops (one per time)?
I tried connecting it before to the net then using WiFi or bluetooth .. but nothing to do.
Very sad.
I'd like to use it much more but is always swithced off closed in the box!
Thank You very much for your help
Ciao
Cixi,
I had the same request and was actually coming back to my original post to update it with the information that i got from O2 and finally I managed to set up for oth a USB modem connection and a USB one. I have attached the USB Modem driver but saved as a .txt file so you will have to open it in note pad and rename it as a .INF file (can also be found on the companion CD that shipped with your Atom) to this post (if uploading allows).
Below are the detailed instructions from O2 to set up a USB connection.
Regards
Chris.
Wireless Modem via USB for XdaAtom
a.) Installing USB Modem driver
1. On your PC, launch Microsoft Activesync. Click on File Connection Setting
2. Uncheck “Allow USB Connections” and “Allow connections to one of the following” then Click “OK”
3. Microsoft Activesync is disabled.
4. On your device, tap on Start Programs Modem Link
5. Select “USB” for the from the Connection drop-down menu.
6. Tap on “Active” and connect your USB cable with your device and the USB port on your PC.
7. Windows XP will recognize the device as a new USB device an will start to install the required modem driver.
8. Select “Install from a list or specific location” and Click “Next”
9. Select “Don’t search. I will choose the driver to install”.
10. Select Modems and click “Next”.
11. Click on “Have ****”.
12. Now browse the location where you have stored the modem driver and click “Open”.
13. Click “Next” to continue the installation.
14. Windows XP will notify you that the driver isn't digital signed so click “Continue Anyway”.
15. Now the driver will be copied to the appropriate location.
16. If the installation was successful you will get a notification from Windows XP. Click “Finish”.
b.) Configuring USB Modem Driver
1. On your PC, Click on Start Control Panel Phone and Modem Options
2. Select “O2 USB Modem Link” and click “Properties”.
3. Select “Advanced” tab and type in Extra initialization commands and Click “OK”. (Command is: AT+CGDCONT=1,"IP","YOUR_APN_NAME","",0,0)
** Depending on which service you wants to create a connection to, you have to use the appropriate APN name and replace the “YOUR_APN_NAME”. You may want to refer to your operator or its web site for the APN names.
c.) Create a Dial-up Connection
1. Start Control Panel Network Connection
2. Click on “ Create a new connection”.
3. Open the "New Connection Wizard" in XP and select “Connect to Internet” and click “Next”.
4. Choose “Set up my connection manually” and click “Next”.
5. Select “Connect using a dial-up modem” and click “Next”.
6. Tick on “O2 USB Modem Link” only and click “Next”.
7. Type in any name for your connection and click “Next”.
8. Type in Phone Number “*99#” and click “Next”
9. Type in Username and Password required (if any) and click “Next” then “Finish”.
10. Press “Dial” to connect to your modem connection.
11. If everything worked fine, you should able to get connected.
d.) Disconnect USB Wireless Modem
1. On your device, tap on “Deactivate” to disconnect Wireless Modem connection.
O2 Instructions with pictures - USB Modem Set-up
Here are the O2 instructions with pictures for the USB Modem
you so funny! :lol:
http://forum.xda-developers.com/viewtopic.php?t=59804
And as Kropotov points out, he was very helpful in assisting me on the previous post that he references above and that i was coming back to update prior to seeing your post.
Attached is the set up instructions for BT Modem link.
Diffence is that with USB modem the connection is of course faster than BT. Also your phone can still accept phone calls while your using the USB modem link but go straight to your Voice mail if your using the BT modem connection.
Thank You All.
Do you think it will work with MacBook Pro too?
I left the Atom at home and now I'm around so I can't try your settings in windoz but as soon as I get back I try them so I can tell you more.
I prefer BT communications since I can swap between PC and MAC easly
Thank You anyway great persons here.
Any idea on how could I achive this with SuSe Linux 10 running KDE?
Hi all,
I lost my CD, so I don't have the modem driver. Can anyone tell me where I can download the atom modem driver? I really want my labtop can use my atom phone as a modem to connect the internet. Thank you in advance!!!
eric50022 said:
Hi all,
I lost my CD, so I don't have the modem driver. Can anyone tell me where I can download the atom modem driver? I really want my labtop can use my atom phone as a modem to connect the internet. Thank you in advance!!!
Click to expand...
Click to collapse
hi
i did`nt find modem driver in my CD.can you help me?
thank you!
angusc said:
11. Click on “Have ****”.
Click to expand...
Click to collapse
LOL.. I dont see this option on my PC.
Anyone got drivers for Vista? I had tested the CD one and it not working.
Definitely need drivers for Vista...Anyone have one?
Thanks
O2 XDA Atom USB not recoginzed
Hi All,
I am trying to connect to Internet on laptop using O2 XDA Atom as a modem. But my laptop is not recognizing my O2 XDA when I connect it to USB port in my laptop. I am not getting the window which asks to install the driver. I tried uninstalling & reinstalling Microsoft ActiveSync but that did not help either. I have O2 Windows USB driver with me.
Can someone please help what more can I try?
thanx- guys
it contain driver for o2 xda atom........enjoy
thankyou for sharing all of you guys, this topic already posted before, i just dont remember, it was long time,.
so maybe many people still dont know how to do it, they can read here,.
modem link - vista configuration
I have been using my atom for 2yrs now. and thanks to all your posts i was able to configure my atom as a modem to my then XP based computer. Recently i bought a laptop with vista in it. Can anyone help me configuring the atom to a vista so i can be able to use it as a modem? Many thanks....
zhardouz said:
I have been using my atom for 2yrs now. and thanks to all your posts i was able to configure my atom as a modem to my then XP based computer. Recently i bought a laptop with vista in it. Can anyone help me configuring the atom to a vista so i can be able to use it as a modem? Many thanks....
Click to expand...
Click to collapse
Hi, you don't need to install anything, just plug your atom via usb cable and run internet sharing application, tap connect then it should be a usb modem.
How about Atom Exec as modem to connect my laptop to internet
How about Atom Exec as modem to connect my laptop to internet by using Vista
any idea?
Why All That?
Read first post and was thinking why you need to connect your Atom Life as modem with manual setting while its just one click away
Assuming A) you have GPRS connection and phone data settings are working as told by GSM provider, you can browse on your phone.
Assuming B) On your pc/laptop you must have installed either ActiveSync 4.2 (WinXP) or later or Mobile_Device_Centre in any version of Vista and you are able to connect your phone to pc. NO NEED TO DISABLE, KEEP THEM WORKING.
If you are ready with above two things, just do one following step.
Step 1) Start >> Programms >> Internet Sharing >> Connect. THATS ALL, YOU ARE ALREADY BROWSING ON YOUR PC.
Only two options are seen in INTERNET SHARING, first to select is USB and second is your GPRS connection profile.
Someone please tell me why all those manual things are required, just for browsing on pc/laptop.
thanks
thank you very much!
i want to use my gprs to connect to internet on my desktop pc..i dont have bluetooth or ir just usb cable and avtivesync installed...i used wireless modem application on my device and it gave some sort of com error..i searched a lot but couldnt find anything...immediate help is required
thx in advance
you need to open Wireless modem from programs menu,select usb and press start before connecting to the usb cable, after that it will detect your phone as a modem, then use the modem driver provided in your cd to install. after installing you need to create a dialup connection and dial *99#. you will get a complete tutorial with pictures from the docs folder in your imate jam cd. it is a pdf file.