Related
Hi, ive checked to see if this has been covered before and can't see that it has but apologies if it has. I have an unlocked XDAII which i intend to use on Vodaphone. Does anyone have the setup details (preferably in dummy speak) to enable vodaphone GPRS on it?
Many thanks in advance if you could share them with me.
Regards.
Check out This posting for connection settings and then This posting for instructions on what to put where. Just replace the O2 servers and settings with the Vodafone ones from the first posting.
Failing that, try the Vodafone customer service line - I think you can dial '123' from your mobile and they should be able to talk you through it (or send you more info).
Codenix.
This posting about the Irish GPRS settings is pretty good too.
Codenix.
Would anyone be able to take the time to post here in detail the settings for O2 MMS in Ireland on a contract bill plan?
I was on to o2 support but it didn't work and got the impression the staff wasn't really up to 100% on the XDA - probably more used to regular cellphones.
I'd appreciate the help from someone with a working mms service on o2 contract.
Many thanks to all
Conor
you could try the o2 website,
there is a section in mms area (get the settings), which allows you to send yourself the appropriate settings via sms.
try it anyway and let us know how u get on.
I'm in the north so the settings may not be applicable for your region.
good luck anyway.
Thanks but no settings there
Cheers, but they only allow you to send the settings and install them automatically by sms. There's no option to send to an XDA - just Nokia etc...
Can someone just copy them down here from their o2 monthly contract XDA?
Thanks again
Conor
ok conor,
we'll give it a go then, what details do you need and I'lli try to supply them.
MMS blues...
Thanks David!
I'm not sure if N. Ireland settings are the same for Galway but sure, let's see!
For a start, does it connect via MMS Network, or GPRS or My ISP, or The Internet etc.?
I can't send at all. But I do receive notifications of a new mms and who it's from, but when I tap download it tries to download but gets stuck there forever without succeeding. Here's what I got from o2 support but it doesn't work.
Connect to server O2IE (the server name)
Gateway - 192.168.090.074
Server address http://mmsc.mms.o2.ie:8002 (I think!)
Thanks again!
Conor
ccc
MMS O2 Ireland
Hi Dan
Thanks for that - but I doubt the uk settings would work in Ireland.
O2 here tried to help so I guess I'm registered for these services.
GPRS works fine the prob is just MMS
Thanks again though!
If any Irish o2 pay monthly users could copy down their settings it might help.
Best regards to all
Conor
Conor,
sorry this took so long, got kinda busy elsewere.
have just looked and the connection was set on My Work Network,
I thought it was/should be, via the MMS network.
will have to try and see if it is still working.
the rest of the settings you gave matched mine except for the .ie replacing the .uk, and different gateway no's, this again could be a UK thing.
If I remember correctly I had some serious trouble at the beginning, I think it was something to do with the Rom version, when I upgraded it from 1.60, the MMS service started to function perfectly.
Rom?
Hi
My ROM is 1.60.00WWE
do you know if I'm up to date?
Cheers!
Conor
Hi Conor,
If you unlock your extended rom, there will be a couple of files relating to O2 customisation. It's made easier by using the horrible Active Today settings which can custimise your device for use in Ireland. I'm sure the settings are also made for the mms program. (sorry, I don't use it myself!)
As for the rom version, I think the lastest O2 rom is 1.66 which is available from their site, you could also go to version 1.72 which is available from this site. I'm at 1.72 and think it's fine.
Cheerio
Howard
Thanks Howard, David and all!
I'll try upgrading the RoM
very grateful indeed
Conor
uk Vodafone, O2, Orange and T mobile settings for xda II and Xda IIs. copy these files in ur XDAxxx and run it.
Is there one for Virgin UK by any chance?
Thanks
Regards
Twojags
was gonna ask the same thing too
RE: GPRS and MMS settings
Hi,
Follow this link, Ihave uploaded all the available cab installs for UK carriers, contract and PAYG.
http://forum.xda-developers.com/viewtopic.php?t=26463
These are the latest version 2.0, as I have seen some earlier versions elsewhere on forum. :twisted:
where in the registry is this information located?? it works fine on the qtek 9100 wm5 but it will only show one of the connections in the connections listing. i istalled gprs monitor and it offers to monitor about 5 different connections that the cab file created. I can only see one of these. Where in the registry would I go to delete the ones not being used???
hi,
I just go my exec and i managed to set up (manualy) the gprs /3g connection so that i can surf the net.
what i cannot do is set up my mms. i also tries the cub files that you uploaded here but...no good.
i have a pay as you go Vodafone UK and i NEED HEPL!!! i have already lost 3 mms.
thanx to all
RE: MMS Settings for JasJar / Exec
ta_ said:
hi,
I just go my exec and i managed to set up (manualy) the gprs /3g connection so that i can surf the net.
what i cannot do is set up my mms. i also tries the cub files that you uploaded here but...no good.
i have a pay as you go Vodafone UK and i NEED HEPL!!! i have already lost 3 mms.
thanx to all
Click to expand...
Click to collapse
Good point, I obtained these files in my earlier link from the I-mate website, I know they work upto Alpine version on WM2003SE.
I don't have access to the I-Mate JasJar section, the cab files were designed for WM2003 & SE, I think that WM2005 probably has a different registry configuration. maybe if somebody has a JasJar, they can get can get the correct files for JasJar Mobile Carriers in I-mate JasJar section. Also Checkout the Unversal section on this Forum, somebody maybe able to help you there.
Settings for 'THREE' Network plz
hello
does anyone have the settings for '3' network?? thanks
Hi folks,
I just received my HTC TyTn today and thought I would post to say that it is AWESOME! So much smaller and pocketable than the Exec, 802.11G and a very slick keyboard.
Also, and more importantly, I found that the O2 Settings CAB from my old XDA EXEC works 100% perfectly on this device for setting up MMS / 3G GPRS / WAP etc. Its a single cab which simply installs those settings and no other O2 Active junk etc. Bear in mind this is for O2 UK only and will probably screw-up your device if you are using it in another territory.
I fully tested this with email / terminal services / mms messages and all worked perfectly. I have attached the CAB in a Zip archive (don't forget to log in to see it).
I hope someone finds this useful.
All the best,
Codeus
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Yes, the Exec which I got the .cab from is also a GPRS 3G phone. so it works perfectly.
I tend to copy useful little cabs like this to my flash card and make them read-only so I can reinstall should I ever have to hard-reset on the road.
Codeus
mrvanx said:
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Click to expand...
Click to collapse
After about an hour of stumbling about trying to find O2 settings for my TyTN I found your post .... cab is absolutely fantastic, thanks!
GPRS
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
O2 settings
Jackjack said:
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
Click to expand...
Click to collapse
This is a very handy Cab file. It is likely to be for those who have a data tarriff i.e subscribed to mobile.O2.co.uk and not payandgo.o2.uk. However all is not lost because you can still install the cab file and then through connections menus you can tweak them for payand go. The following reference shows the different entries between payg and contract:
http://www.mphone.co.uk/mms_wap_settings_o2.html
Installing the cab file. Just download it either directly to your device or to PC. Do not extract or expand the file if it's on your PC just open active sync, use the explore button to open your device files and put it where you want (storage card for preference). Go to your device and tap/double tap the Cab and it will run.
Mike
O2 Cab file
JackJack
I've just noticed your in the US. This cab file is for UK so I guess not much use for you. What I said about Cab files still applies in general though. You'll often find a choice as to whether you want to download a Cab file or an EXE file. Generally (not always) you run Exe files on your computer and they install to your device (while your conected with activesync). Cab files you copy onto your device and just tap them to run them. I like these cos I can store all the good ones on my SDcard and if I ever have to hard reset I have them all ready to tap and install again without resorting to the PC to reinstall everything.
Mike
mda cab file o2 settings
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
lady_tweetie said:
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
Click to expand...
Click to collapse
plse help am nw at dis
Brillant, thank you
Thanks for that CAB, just used it to get my Kaiser working.
Just had to change the username and password in the settings and works perfectly.
Many thanks for sharing it.
I tried using this cab, and so far it seems to be all good, but I still can't get my MMS working. They haven't worked since I moved to 02 last year and still using my Vario II.
I've just flashed the Faria32 rom and I'm loving everything so far. I was hoping that this would now start working. Does anyone have any suggestions? Or is it just part of the deal with using a non O2 handset? Internet seems to be working fine... just no mms.
Incoming MMS problems on o2 PAYG fixed
I've had a problem with O2 PAYG, after installing the CAB and changing settings from contract to PAYG everything worked except incoming MMS (outgoing was ok). Eventuially I set O2 Active as my work connection, altered the O2 Active access point to payandgo.o2.co.uk, username=payandgo and password=password. The only proxy set was WAP=193.113.200.195:9201 In the MMS settings, the everything was left as default (connect using O2 Active, gateway 193.113.200.195, port 8080, server http://mmsc.mms.o2.co.uk:8002)
Not sure why I had to use O2 Active instead of my internet connection with WAP proxy set, but it works now. Happy Bunny
Incidentaially, O2 refused to help me because the Hermes (O2 Trion) is only supported on contract. I guess if you are on PAYG, you could move to a simplicity plan for a month, get O2 to help, then go back to PAYG and change the settings back to the payandgo ones.
One of the reasons I went back to O2 is cos I've always had good customer service... I'm beginning to rethink that with their "computer says no!" help...
Thanks for the help i'm going to see if the O2 Active settings help me at all.
Anno 2009 still working, thank you.
tytn 2 gprs probs on o2 pay and go
hey all
if u are a pay and go customer (im on o2) when ur setting up ur connections simply enter the contract APN in the access point area..not the pay and go one as its restricted. I did this and boom the tytn was on the net! I suspect this could be the same for other pay and go sims. Hope this helps those of u who were bangin their head against the gprs wall of pay and go smartfone world.
Here's the cab file for setting up gprs and mms for PAYG.
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
keenan316 said:
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
Click to expand...
Click to collapse
Download, copy to device (anywhere, even storage card), run on the device and let it install. That's it.
thanks this worked great on my pay and go O2 HTC Touch Diamond P3700
Hi
i have been searching the internet for wap and mms settings so i can use the x1 to browse the internet like i did on my iphone i managed to find the usual apn, username and password settings and entered them into the connections menu in the x1 but the domain setting was missing i still tried to connect with no luck. i called o2 this morning for the settings they said i had to click a get o2 settings app in the programs folder which i did and instantly got a text saying unavaible contact o2.
does anyone here have the correct settings and maybe a step by step??
Also it is a vodafone x1 with my contract o2 sim with unlimited interent on it.
Thanks
i have a simfree x1 uk with a o2 uk sim. when i put the sim in the phone it did all the settings, the only prob i got is mms pics are too small. i know there is a fix but have not bothered to do it yet