Database Users

How to transfer calls to Bluetooth Headset?

Hi, all.
Hope someone can assist me. I'm using an XDA II that has been upgraded to 2.06 Windows Mobile 2003 SE.
I have enabled the Bluetooth Headset profile on my Today screen and calls will transfer over to my headset (SonyEricsson HBH-65).
My question is for the following scenarios:
1) The calls transfer over but sometimes the connection becomes lost while I'm still mid-way in the call. How do I instruct the XDA to transfer the call to my Headset again? Tried pressing the button on my HBH-65 but the call doesn't transfer.
2) Sometimes, I put on my headset but forgot to turn it on. When a call comes in, I realise my mistake and answer the call on my phone first but then I ask the other party to wait while I turn on my HBH-65. After turning it on, how do I transfer the existing call to my headset?
Hope someone can help with some advice. Thanks in advance

1) I currently use BlueTrek G2 and so far has got no probs at all.
2) The BT headset has to be running before the phone in call. For the BT signal it has to be sent right b4 the phone in call.
I guess that's how you can get ur headset running.
I've got that to my best. Good luck...

No problem with them...
i am using BHB-65 too, they are great ,man, i have no problem with them from the first time using.
1. When you want to connect to the headset, there's an icon near the phone icon, you touch on that , it will indicate the term to transfer the call back the headset or cut it out.
2. When you forgot turning on the BT headset, just turn it on and press "enabled the headset" (on the desktop, remember to "view the profile" in item "Today"), it will automatically transfer the call to the BT headset.
Wish you could do that.

Bluetooth Voice Activation

I am using a Plantronics 510 BT headset, but i can't figure out how to get the voice activation working.
I beginning to think that it is not supported, read the manual and afaik it doesn't mention the subject at all.
Has anyone got it working yet?

Tiemen said:
I am using a Plantronics 510 BT headset, but i can't figure out how to get the voice activation working.
I beginning to think that it is not supported, read the manual and afaik it doesn't mention the subject at all.
Has anyone got it working yet?
Click to expand...
Click to collapse
I am not sure I understand your question but I use a SonyEricsson stereo BT headset and when I press the "answer" button on the headset (when phone is not ringing) the "Voice Speed Dial" program comes up.

It does the same with all my jabra

Yes the voice dial function to dial numbers and startup programs is what I meant.
I got it working now
Apparently I have to hold down the button for a second or two to make it work.
Next time I should try a little harder to figure it

anonimo said:
I am not sure I understand your question but I use a SonyEricsson stereo BT headset and when I press the "answer" button on the headset (when phone is not ringing) the "Voice Speed Dial" program comes up.
Click to expand...
Click to collapse
Hi,
I've got a SE BT HBH-660 and when I push the asnwer button, I4ve got the "beep beep" in the speaker telling me that the Headset try to connect to the phone, but for some reason the Phone does not wake-up each time.
To make the voice dial working I need to ON/OFF the BT stack on the phone side.
When my SE BT headset is on and I make a phone call, not all the time the phone connect to the headset.
Did someone figure out the same behaviour ?
If yes how does it solve this ?

HELP...Bluetooth Headset disconnects after ending a call

Hi everyone
I have Eten M700 with WM6 ..
I tryed couple of bluetooth headsets (regular, not stereo) and i was able to pair all OK & make and recieve calls
I was even able to divert all sounds to headset to listen to my music (using either btIO or Blue Music)
I also have MS voice commander 1.6 US & it works through bluetooth without problems
I still have one problem:
when i end a phone call (touching red screen dialpad button or by hardware button) or even by waiting for the person on the other line to hang up..then my headset disconnects (i do not see the headset icon on top right of dialpad) and on the next phone call i have to restart pairing by pressing the headst button (it should start automatically & not disconnect)
i do not have to enter pairing code but it is still one extra step that i did not have to do with other phones..also, i miss some calls because when it disconnects i may not hear my phone speaker ringing as i will be away or driving
Does anyone else have the same problem?
Any fix (software, cab or reg tweak) out there to keep the bluetooth headset connected and paired inbetween calls (not disengaging after a call ends)
Thanks

I have the same problem, though i use my DS-220 as a wireless stereo also , i have no problem using it as one or another (handsfree/stereo headset) but as soon as i'm listening to something and i answer a call, sometimes, the headset disconnects itself after a call and i also have to push the button on the headset to connect it again - but not every time, best solution to resolve this problem for 70% of occasions was to uninstall Microsoft Voice Command 1.6 which was messing up with the BT on my phone, since it uses the handsfree's talk/end button as it's own "engage" button, but still, sometimes, this error occurs
I was wondering, if someone of u has working BT Widcomm or any other better BT stack (better than the microsoft bull*hit) and would mind PMing me the link, I could try it out and see, if that's the solution

BT new fix needed
This dsconnection has been happening with me even before MS voice command installation
i did not notice difference with it installed, i am alble to make commands without bluetooth droping & i give my commands through the BT headset without any registry hacks (read something about people having to give commands through phone speaker not headset) i do not have that problem
my only issue is the dropped connection after finishing a phone conversation (by ending a call or other side ending it)
I need a good developer to fix that & also, maybe work on dr.Yar BT software that shows sender/reciepient ID and file progress. that software shows blank white pop-up window when recieving files from some devices.. maybe also add a clickable line to make BT discoverable or hidden to the menu list there
i use BT only for regular mono headset & file transfer, i route music to my mono headset with BlueMusic v2 sometimes too.
If these 2 issues are fixed im all set (droped with calls & ID/progress blank window in Dr.Yar)
Thanks for looking

nothing
no one has solution for this???

BT Headset, BT CarKit (XCarLink) and M$ Voice Command

I have had a Jabra BT Headset for a couple of years and it works well. I have recently purchased a XCarLink with BT and am now using this in my car instead of the headset. One thing that I liked about the headset was how it worked with M$ Voice Command - i.e. press the 'Talk' button and Voice Command would start and you could say 'call xxx' etc. With the XCarLink if I press the 'Talk' button this justs stops any music that was playing but doesn't start Voice Command.
Is there any tweak I can apply to get this behaviour?
Andy

More testing......
I have been doing some more testing with this as the Jabra BT headset stopped activating Voice Command...
Anyway I have tested a couple of different versions of Voice Command (1.6.19214 & the one from the Diamond 1.6.19581) and both behave the same. If A2DP Joint Stereo is enabled (HKLM\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings - UseJointStereo=1) then the 'Talk' button on the BT headset no longer activates Voice Command. If Joint Stereo is disabled the 'Talk' button activates Voice Command (after a soft-reset).
I haven't had time to check the behaviour with the XCarLink but I will post the results when I do.
If anyone has any experience with this or knows a fix then I'd appreciate it.
Andy

Anyone been able to get voice dialling working from the Xcarlink? I just bought one and am having the same problems.

[Q] Bluetooth headset default

I have a Plantronics Voyager Pro headset. I've used this with my previous phone, a BB 8900. When the headset is on, it connects to the MT4G and if I make a call, it will automatically use the headset. However, if the headset is on and I recieve a call, a menu opens on the phone and askes where to send the audio. I'd like to set it so that it always chooses the headset if it's on. That's how the 8900 used to work.
Right now, once I answer the call, there's a pause while I select the Voyager Pro out of the menu. Does anyone know how to set this?
Thanks,
Dave

l've found that if you depress the headset button instead of touching the screen during the ring, your phone will answer and use the BT headset without the prompt.
If you touch the screen first, you're screwed.

Hey, thanks! I didn't even think of that. I'll give it a try. I was used to my BB automatically connecting to the BT if it was on. You get a big "Thanks" button for that one.
Dave