Related
Since I've had slide 2 unlock installed since day 1, I'm not sure if its that, the Mogul, or Sprint, but everytime I get a call, the phone turns on, shows me the locked screen and waits a good 2-3 seconds before the ringer starts and then a split second later the ID.
It seems like if it were slide 2 unlock somebody else would have had mentioned the problem there. It could also me being thick and this is just an extension of the common problem where the caller gets like 3 rings in b4 we get a ring(I have done that "hack" but don't believe it does anything.)
Kind of annoying when I see it light up, know I'm getting a call but can't answer or see who it is. Anybody know how to fix it, or at least give me an explanation so I at least have some sort of answer for people asking me wtf my phone is doing.
gernerpsu said:
Since I've had slide 2 unlock installed since day 1, I'm not sure if its that, the Mogul, or Sprint, but everytime I get a call, the phone turns on, shows me the locked screen and waits a good 2-3 seconds before the ringer starts and then a split second later the ID.
It seems like if it were slide 2 unlock somebody else would have had mentioned the problem there. It could also me being thick and this is just an extension of the common problem where the caller gets like 3 rings in b4 we get a ring(I have done that "hack" but don't believe it does anything.)
Kind of annoying when I see it light up, know I'm getting a call but can't answer or see who it is. Anybody know how to fix it, or at least give me an explanation so I at least have some sort of answer for people asking me wtf my phone is doing.
Click to expand...
Click to collapse
I get the same on my phone, and I also have S2U, don't know if that causes it or not. Try turning it off and then have someone call you and see if it still does it, that'll tell you.
I personally just don't worry about it. It gives me time to grab the phone.
i have the same thing, for voice calls as well as SMS. i do not have slide2unlock.
i really hate this and would even be happy if the screen would just stay off until the ringer starts - im fine with the delay, but anytime my phone is on for anything i think its about to ring...
You could just not look at the phone until it rings, although it's a hard habit to break, I feel ya.
But i think it has something to do with the phone needing to wake up before a notification box can even pop up
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
When I call my voicemail [using google voice] it wants me to enter my pin.
1. Isn't there a way to program the dialer to pause, then enter the pin automatically?
2. I notice that the phone acts very quirky when on a call. In order to do anything when on a call I have to turn it so that it is in portrait mode, not landscape because it sort of 'sleeps' once I am on a call.
3. Being the phone wants to sleep when I am on a call, I can't seem to find a way to get back to the phone app and hit the RED 'end' button at times ..
Sort of hard to explain but maybe someone can do a better job if you have found the same problem. I love this BIG phone. I wouldn't even object to an extended battery.
shEEEsh said:
When I call my voicemail [using google voice] it wants me to enter my pin.
1. Isn't there a way to program the dialer to pause, then enter the pin automatically?
2. I notice that the phone acts very quirky when on a call. In order to do anything when on a call I have to turn it so that it is in portrait mode, not landscape because it sort of 'sleeps' once I am on a call.
3. Being the phone wants to sleep when I am on a call, I can't seem to find a way to get back to the phone app and hit the RED 'end' button at times ..
Sort of hard to explain but maybe someone can do a better job if you have found the same problem. I love this BIG phone. I wouldn't even object to an extended battery.
Click to expand...
Click to collapse
Don't know about point 1 but i have just read that when making a phone call it has to be in portrait mode and as you bring it up to your face the proximity sensors will turn off your display to prevent unintentional touches is that what you were on about or have i got it all wrong
I don't understand all the technical stuff but to hold it, it has to be in portrait mode, but even if you have the speaker on and it is on it's back on the table, you can't press the keypad [once the call has begun] unless it is in portrait mode. I would like to turn off 'sleep' while I am on a call .. REALLY annoying.
SUGGESTION: Don't make any prank calls until you know that phone inside and out because sometimes hanging up the phone is close to impossible. Unless it's just me.
shEEEsh said:
I don't understand all the technical stuff but to hold it, it has to be in portrait mode, but even if you have the speaker on and it is on it's back on the table, you can't press the keypad [once the call has begun] unless it is in portrait mode. I would like to turn off 'sleep' while I am on a call .. REALLY annoying.
SUGGESTION: Don't make any prank calls until you know that phone inside and out because sometimes hanging up the phone is close to impossible. Unless it's just me.
Click to expand...
Click to collapse
AHHHH so its you makeing all the prank calls to me LOL.
It dosen't say anything in the manual on turning off the sleep i will do a google and have a look
sssshhhh ... don't tell .. I have lots more calls to make
But seriously .. I called to check my voice mail and somehow the dialpad went off the screen .. Tried pushing buttons, but there apparently isn't one that will bring it back up .. Mean while I hear the recording saying the same "enter your 4 digit pin over and over." I would if I could find the dial pad again !!! Same if you are leaving a message .. if the screen sleeps, you are fumbling around trying to get it to come back up to click END.
Yes i have had quite some issues with it as a phone, specially when it rings but the screen is still in sleep mode for some reason. So you have to turn it on from sleep then hit the unlock before answering. This is a long process to accept phone calls, also when you answer the phone my ears always seem to hit the screen which triggers the apps menu....
I have had it since launch day and been trying to use it as a primary phone but i don't think thats working out. But as an MID its amazing I love using it, the screen is nice and great using it a a ebook reader.
When I get a phone call my screen comes on, unlocked and ready to answer.
My slight issues are my face is too small to go from the ear piece to the mic LoL
Sent from my Dell Streak using XDA App
I too am having the same issues as many on here.
A-N-N-O-Y-I-N-G is what it is!
I can;t even hear anything out of the earpiece in the phone, although i can if i turn it on speaker...not a happy bunny as now i have to wait for a replacement!
One question tho, which has been driving me insane...
Does anyone know if there is some kind of 'file-explorer' for accessing the conent on the SD card?
The only way i've found so far to even get close to the files is through 'QuickOffice'... Would've thought they'd be a more 'convenient' approach to it...
Any ideas?
Yesterday I purchased a program called 'screeb.' It is supposed to be able to prevent 'sleep' when you are actually still using it among other things like battery saving things .. I haven't tested it yet but maybe others have ??
AndyGlosta said:
Does anyone know if there is some kind of 'file-explorer' for accessing the conent on the SD card?
The only way i've found so far to even get close to the files is through 'QuickOffice'... Would've thought they'd be a more 'convenient' approach to it...
Click to expand...
Click to collapse
There are several free file explorers in the Market .. As for sound.. are you sure you are putting the right end to your ear ?? Seriously .. It would be easy to make that mistake when everything is dark ..
shEEEsh said:
There are several free file explorers in the Market .. As for sound.. are you sure you are putting the right end to your ear ?? Seriously .. It would be easy to make that mistake when everything is dark ..
Click to expand...
Click to collapse
Yeah, definetly got it at the right ear
Will have a look round for a file explorer then, i just thought it would have came with one...silly me! lol!
If I had the phone on speaker and put it to my ear it would deafen me I think. Speaker is VERY loud. Could it be that you have the TTY feature turned on? [ I think that is what it is called, not even sure what it does.] I just can't understand why it won't work as a phone.
I have been trying to use BT only when using it as a phone. I am very afraid my earrings are going to scratch the screen.
I was trying to decide if maybe I should put the sim from my streak back into my iphone and then move the sim from my HTC Shift into the Streak until I got more used to using it. Especially if I am going to use it a lot for voice. I also use my phone for data more than voice.
ALSO .. wondering what an extended battery would be like .. Make it harder to hold? or give you something to hold on to... Right now my hand has to really stretch to grasp the phone ..
ANYWAY ... enough with all this thinking .. I should have been at work 15 minutes ago and I haven't even gotten in the shower.
Diane
lufc said:
...is that what you were on about or have i got it all wrong
Click to expand...
Click to collapse
I love British expressions ... Lately I notice that people in the USA are using them more and more .. The one that annoys me the most .. BECAUSE IT IS NOT OURS TO USE is the expression "gone missing." Everyone who is missing has "gone missing" and until about 1 or 2 years ago it belonged to YOU ... What I am trying to say is I like when YOU use them, but when WE do it sounds WRONG.
Diane
@shEEEsh
Your voice mail issue should be fixed by downloading the tmobile visiual voice mail its simple fast free. Also your sleep issues should be fixed with 2.2. I know with my N1 when I move the down it turns on.
@ Andyglosta
Try oi file manager on market. It'll do what you want.
There's also astro, but personally I think it looks crap..
Sent from my Dell Streak
wondercoolguy said:
@shEEEsh
Your voice mail issue should be fixed by downloading the tmobile visiual voice mail its simple fast free. Also your sleep issues should be fixed with 2.2. I know with my N1 when I move the down it turns on.
Click to expand...
Click to collapse
I have everything with Tmobile but it won't let me install tmobile visual voice. Actually it says it is installed, but I can't activate it.
Just got off the phone with Tmobile and they turned on Visual Voice for me. Good. Next on the agenda is when a call ends getting back the dial pad so I can hang up ...
shEEEsh said:
When I call my voicemail [using google voice] it wants me to enter my pin.
1. Isn't there a way to program the dialer to pause, then enter the pin automatically?
2. I notice that the phone acts very quirky when on a call. In order to do anything when on a call I have to turn it so that it is in portrait mode, not landscape because it sort of 'sleeps' once I am on a call.
3. Being the phone wants to sleep when I am on a call, I can't seem to find a way to get back to the phone app and hit the RED 'end' button at times ..
Sort of hard to explain but maybe someone can do a better job if you have found the same problem. I love this BIG phone. I wouldn't even object to an extended battery.
Click to expand...
Click to collapse
1. You can long press * on dialpad, it will show "p", then enter pin.
It can also be used in the contacts (just type p).
2. no idea...
3. Tried power on key ?
Maybe I throw my hands in the air to fast, but I shut off google voice and went back to tmobile 'visual voicemail.' It is sort of the same but I will miss google's voice to text translation via email SOOOOO MUCH ... It is probably the most entertaining application that I have ever had. I like to forward them to the person who left the voicemail and say "what?????"
It seems funny. But I can't use google voice here ;-(
I just installed Google Voice on my Epic 4G and received my first phone call on it - and was unable to answer. Two problems - first, when I answered, the greeting telling me to press "1" to accept was cut off at the beginning (all I heard was '...all from [spoken voice]. Press 1 to accept".
I can get past that, but then when I pulled up the dial pad to press 1, I was unable to. I pounded on the "1," was sure it was showing up, but it would not answer the call. I tried enabling audible touch tones but that didn't work, and I don't think there's a setting on the epic to change between long/short touch tones.
Does anyone know what's going on with this?
pissinguoff247 said:
I just installed Google Voice on my Epic 4G and received my first phone call on it - and was unable to answer. Two problems - first, when I answered, the greeting telling me to press "1" to accept was cut off at the beginning (all I heard was '...all from [spoken voice]. Press 1 to accept".
I can get past that, but then when I pulled up the dial pad to press 1, I was unable to. I pounded on the "1," was sure it was showing up, but it would not answer the call. I tried enabling audible touch tones but that didn't work, and I don't think there's a setting on the epic to change between long/short touch tones.
Does anyone know what's going on with this?
Click to expand...
Click to collapse
I think the second problem is a bug. It's not related to google voice but the phone itself. The dialpad is not very responsive when you take the phone off your face and the screen is back on. Wait a few seconds, and it'll be back again.
It happened all the time when I called any customer service number and tried to use the dialpad to choose in the menu.
Bigger problem
fookxixi said:
I think the second problem is a bug. It's not related to google voice but the phone itself. The dialpad is not very responsive when you take the phone off your face and the screen is back on. Wait a few seconds, and it'll be back again.
It happened all the time when I called any customer service number and tried to use the dialpad to choose in the menu.
Click to expand...
Click to collapse
I never had the phone to my face when I did my test calls - this was always phone in my hand and calling from my office phone.
I think I just came across a bigger problem - the dialpad doesn't work on incoming calls. I just called my phone from my office on the regular (not G-voice) number and pushed a bunch of buttons, and couldn't hear the tones.
You can disable the initial greeting and go straight to the call when you pick up. It is under Voice Setting in your google voice account. I know this doesn't address your unresponsive screen issue, but it's a temporary work around until your dialpad gets fixed.
bojackson63044 said:
You can disable the initial greeting and go straight to the call when you pick up. It is under Voice Setting in your google voice account. I know this doesn't address your unresponsive screen issue, but it's a temporary work around until your dialpad gets fixed.
Click to expand...
Click to collapse
Is this actually a bug? I posted another thread here and am trying to have people verify whether or not this is a real issue - if it's not a bug then I definitely need to replace the phone, 'cuz it's been factory reset as of last night.
Seems that whenever I disconnect a phone call, the call log is automatically displayed. Other phones I've used return you to the home screen when disconnecting a phone call. Why would I need to view the call log after hanging up (I know who I just talked to so why would I need to see it...). I know it's easy to press the button to close the log but this is just one of those little quirks I find annoying.
Is there a setting I'm missing to return to the home screen when a call is finished?
Thanks for any help.
Stock Nexus 4 on 4.2.1
I dunno... I kinda like it staying in the phone app. And it kind of makes sense if you're disconnected and need to call back (or need to make another call and get back to that person).
I have no idea why anyone ever thought that was a good idea, but there's an app to fix that. I've used it on all my Android phones, and it works well.
ltassos said:
Seems that whenever I disconnect a phone call, the call log is automatically displayed. Other phones I've used return you to the home screen when disconnecting a phone call. Why would I need to view the call log after hanging up (I know who I just talked to so why would I need to see it...). I know it's easy to press the button to close the log but this is just one of those little quirks I find annoying.
Is there a setting I'm missing to return to the home screen when a call is finished?
Thanks for any help.
Stock Nexus 4 on 4.2.1
Click to expand...
Click to collapse
Just for info: Some Custom ROMs have a setting in the dialer app to exit after the call instead of going to the call log. I don't know why anyone would want that either...
Thanks to all for the replies. I ended up creating a Tasker profile to take it back to the home screen upon ending a phone call. (works great).
Probably in case of dropped calls? I can see that being the reason.