Hi there, I've just bought a Qtek S110 and I'm wondering about all the roms that are discussed here. Just a couple of questions, I'd be very happy if they could be answered.
- What is the latest rom for my Qtek S110 and where can I find it? I've looked for the Qtek homepage, but my Swedish isn't that good.
- Are the Radio and Bigstorage roms recommended? They sure sound good, but what versions do I need? I see so many on the FTP! I can't tell the difference or the version I need.
- Is there anything else that is important concerning roms that I need to do before using my lovely S110?
Thanks in advance for answering, I'd love to get the most out of this beauty .
Hehe, mine neither.
- I think the latest rom is 1.12 and radio is 1.12 too. At least that is on my S110 and that is brand new too.
- I'm not sure if I would mess with the BigStorage Rom, its not really neaded with 128MB RAM and I'm not sure it is works 100% on the S110 that is slightly diff when it comes to mem configuration
- I would do that softreset after hardreset trick to install the tools from the extrended ron you need and leave the rest out to save some RAM (not that you need to but why install crap?).
By the way, there is an english qtek page here: http://www.qtek.ch/IndexEN.htm
Thanks for your reply, I already seem to have the 1.12 roms, so that should be fine . With the trick when you softreset after the counter of the hardreset, no software is installed? So you have to do everything manually?
Another weird question, why does my S110 say I only have 8 MB of storage :O?
The storage is the internal ROM, you can store data here that will not be lost in case the battery runs out. it has 64MB of ROM, 8MB are free (rest is taken by OS). And it has 128MB of RAM, 121MB are useable here.
With the softreset after hardreset (do a hardreset, configure screen and time zone and click ok - right after that do a soft reset, be fast before the setup of the extended rom starts) you will have the normal WM2003SE PE ready for use but none of the programs form the extended rom are installed. You will find a new folder "extended rom" where all the cabs are stored, install only the ones you like. Most of them are provider branding, or pretty useless tools. You can get better from the inet. You can read about it here:
http://forum.xda-developers.com/viewtopic.php?t=14533&highlight=soft+hard
Thanks very much Private-Cowboy, that really helped me a lot!
Related
Hello everyone.
This is my first post in this forum, but I have been reading it for a while. Tomorrow I’m going to be a proud owner of a Qtek S110. If I’m right the only difference between s100 and s110 is the 128MB of RAM. But does anybody know if the ROM’s for S100 can be used with S110 and will the BigStorage hack work on S110??
Regards
PK
I think there aren´t any user here, that have already this device.
Maybe you could make a dump of the ROM and Upload it to the ftp.
Then there will be a possibility to take a look if there are any differences, and if the BigStorage trick does work also....
Stefan
OK!
I shall do an SD dump when I get the device and upload to the FTP and hopefully someone can take at look at it.
Regards
PK
Any news about BigStorage Hack and Qtek S110???
As far as i remember, someone already posted information about his device with 128 MB RAM and the big storage. There are shops in the web which do the memory upgrade for quite some time already. I don't think you'd have problems with a normal Magician Rom, assuming that the hardware isn't different other than having more RAM.
Hey!
iv been looking over this forum for about 4 hours, and i am totaly confused :S
what do i need to upgrade?
it doesnt have to be a norwegian rom, as long as it works
im new to "the game" and i know nothing about my phone, other then that it is a Qtec, and its called 2020i
the rom version is 1.11.00 WWE
Radio version: 1.02.00.
wich by the look in this forum, seems somewhat old
i know this place isnt a helpdesk, but iv been googling and surfing forums for 2 days. and this place looked like it could maybe help me.
thanks for any respons
-Bateau
welcome
ur right its the place where u will learning everything about ur phone
before 6 month i was like u know nothing
but now i'm not expert but i know very very more
i have 2020i we called it alpine i upgrade my rom with pug rom (O2 1.11.162 uk radio 1.04) and its great
Best Alpine ROM
Here is the direct link to the PUG modified ROM, which is the best you get
Standard 162 ROM, Radio 1.04, improved camera and extra Bluetooth profiles:
ftp://xda:[email protected]_Fixed.rar
Check this link for plenty of info.
http://forum.xda-developers.com/showthread.php?t=258480
DAz
could you desribe the instalation process or a link where it placed
ps
i also donot now any sing about my qtek 2020i
Help a Noob
Hi,
I recently aquired a Qtek 2020i, and this is my first time in the PDA world, but it hangs all the time. So I'm hopping you guys can help me to update the ROM to something more stable.
I've been around the forum and found out how to backup my ROM to a SD card, so that is what i'm going to do first... to be safe.
Now I've downloaded this ROM version. And, by the read me file included in the rar file, it will be very simple to run the update... Actually I thought it would be very much harder
The question is:
Must I thake any special security steps other than the original ROM backup? Or can I just go for the update?
Thanks for any help you can get me
Done
Update successfull
I'm gone evaluate this ROM... Hope it's better than original
This is buried in some other threads, so here you go
(First off, I take no responsibility! Dumped using aWizard tools, and you can find more info in that thread on these forums.)
ROM version: 1.6.7.1 WWE
date 11/28/05
radio 1.13.10
protocol 4.0.13.24
extrom: 1.6.7.101
Here are the links and anyone is welcome to upload it to the FTP...
http://www.richardgoodwin.com/Qtek_9100_1_6_7_ENG.zip
http://www.richardgoodwin.com/Qtek_9100_1_6_7_ENG_Extended_ROM2.zip
Note that it doesn't contain radio firmware, etc. It is just the OS and ROM2.
n return I ask for your comparison in terms of speed, included apps, stability, etc. versus your current version. Reply to forum....
how do we install the nba?
Here's the thread with aWizard. http://forum.xda-developers.com/viewtopic.php?t=37386
It's very easy...connect via usb, make sure Activesync is connected, then (going from memory here, but the tool will prompt you anyway )
Enable RAPI
Unlock (if not using a Qtek)
'w' to write the file
cross fingers and wait for phone to reboot
But again, only do it if you're comfortable! I am no Qtek representative
Ouch, i got rom-version 1.3.7.13 ... Is it many new fixes in this one?
rgoodwin Can You post all ROM using 'mtty' & 'psdread'?
Button said:
rgoodwin Can You post all ROM using 'mtty' & 'psdread'?
Click to expand...
Click to collapse
Yeah this will be more helpful.
I don't have an SD card, which seems like it is required to do what you are saying...?
extended rom version?
What is the difference betwen the normal and extended rom version?
I unlocked (also CID unlocked) mine SPV M3000 and run now a Qtek 9100 version on it...
Hi Sorry if this is a stupid question,
but I'm assuming that the ROM upgrade - http://www.richardgoodwin.com/Qtek_9100_1_6_7_ENG.zip
will update the OS ONLY (ie WM5) and NOT alter the contents of the Extended ROM??
I ask because I want to keep my T-mobile UK customisations (Found in the extended ROM) as they have my internet settings etc. I dare say one day I'll get around to finding out what they are so I can ditch the T-mobile stuff.
P.S Just in case I have backed up my extended ROM stuff just in case
Thanks in advance
John
Correct, the OS is the OS, the Extended ROM is separate
Anything cool in that Tmobile Ext ROM?
Not really, it seems to customise the look of the PDA - easily altered using Pocket Plus, and it sets the IE homepage and settings. What all the others do is anybodies guess??
Mine has these:--Seems a lot- I wonder what they all do and whether they are really needed??
Autorun
CAB-Customisation-Connection-TMUK-Wizard-Aug08
CAB-Customisation-TMUK-Wizard-01-05-04NOV05XML
CAB-Customisation-WapPush-TMO-Wizard-Sep02-1
CAB-DATEamil-Wizard-TMOUK-04Aug05-DataBase
Config
cusTSK
OemExtDll.dll
PictureVideo_reg_signed
Shortcut-MMS1-JAVA6XX-CV-VOICE-Emailwiz-TMO-03Nov05
Signed_BeepMode_Longtunes.sa
Signed_CameraPatch_OV9650.sa
Signed_ExtendedROM_Version
Signed_TMO_CameraDriverPatch.sa
Signed_TMO_DisableLoadSIMdata.sa
Signed_TMO_OutgoingSpeech.sa
Signed_TMUK_Cust_Wiz03000100.sa
Signed_WifiSSID.sa
Signed_Wiz_NoGPRSAutoattach.sa
Signed_Wiz_TMO_STK.sa
SmartDialing_enable_0915_signed
TMO_UK_Browser_signed
TMO_UK_pIEDefaultPage_Signed
TMO_Wallpaper
UNI_BrowserPerformance.sa
WifiTempOFF
WifiTempON
Upgraded my ROM to to 1.6.7.1
working great.
assasins said:
Upgraded my ROM to to 1.6.7.1
working great.
Click to expand...
Click to collapse
Hi Mate,
Could you tell us what is your after-upgrading Windows Version is?
Mine is 5.1.70 (build 14406.1.1.1), if your WM5 version differs then there is at least one reason to upgrade my Qtek9100 rom (1.1.7.9). Otherwise it seems that 1.6.7.1 is the same as 1.1.7.1 in terms of OS
Thanx in advance
Sorry if this is a silly question, but can I use this on my O2 XDA mini s?
Will I lose or gain anything over the O2 ROM (that was shipped with the handset)?
The one feature I REALLY want is A2DP so I can use my bluetooth stereo headphones.
Thanks for any advice.
IMate->WM2k5 said:
assasins said:
Upgraded my ROM to to 1.6.7.1
working great.
Click to expand...
Click to collapse
Hi Mate,
Could you tell us what is your after-upgrading Windows Version is?
Mine is 5.1.70 (build 14406.1.1.1), if your WM5 version differs then there is at least one reason to upgrade my Qtek9100 rom (1.1.7.9). Otherwise it seems that 1.6.7.1 is the same as 1.1.7.1 in terms of OS
Thanx in advance
Click to expand...
Click to collapse
yes, the build is different. after updating to this rom, it is now 5.1.70 (build 14409.1.1.2) < no AKU2.0 though
i can't upgrade always getting msg itsutils.dll inuse ?
mack said:
yes, the build is different. after updating to this rom, it is now 5.1.70 (build 14409.1.1.2) < no AKU2.0 though
Click to expand...
Click to collapse
Thanx for your info!
Build change doesn't look very attractive to me coz it might be localization and other minor changes. Still waiting for AKU or other significant changes ;-)))
extended rom ?
Hi
I'm new so I might asked stupid questions
I got my PDA for 3 day and thanks to the posts here, I unlocked,
put some other firmware on it etc...
What is not clear for me at the moment is the extended rom issue ?
Is this a sort of addition ?
Can anyone help this newbie ?
Heya rgoodwin,
What was the original source of your ROM? Did you modify it in any way? The ROM that TMO UK offers is version 1.6.2.4, so yours appears a bit more "advanced".
Sorry if this info is posted elsewhere - I even went to your site, rgoodwin, and couldn't find a listing. Nice low carb story, btw!
Can you update the ROM without losing any data on the device?
I put it up on the ftp, but haven't had a chance to run it yet.
ftp://xda:[email protected]/Up...U_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
I'd like to know where this came from..??
did anyone test it????
I will do as soon as I know where it came from..??
Just flashed it without any problems. Can confirm that it is the original Qtek shiped Rom dated 28. November 2005. Have fun
came from expansys. details here
http://howardforums.com/showthread.php?p=6544725#post6544725
Many thks guttrhead.. Will be flashing as soon as my unit is fully charged.
Just flashed this ROM, works OK.
Solves the problem with phone wakeup from BT Headset button press.
After flash how many RAM total have Wizrard? 50MB or only 44MB?
Thanks
Total : 47.46MB
In use : 4.26mb
Free : 43.20MB
Everything seems much quicker compared to the K-jam rom I had previously. Used to hang quit a bit.
The first shipment Qtek WWE Rom has size ~45mb.
This brand new shipment Qtek WWE Rom has size ~52mb.
Why there is this difference between sizes?
Thanks a lot
I 'm trying to flash my dopod 838. I will be back.
Hi,
I wanna try this ROM, but I thought I´d ask if anyone has updated a swedsih sold Qtek 9100 with this one with success?
Does the ROM include fulll Swedish language?
thx / fahlis
Hi fahlis,
I've upgraded my Swedish Qtek with that ROM, no problem whatsoever.
You just need to unlock your device first with lokiwiz utility: http://forum.xda-developers.com/viewtopic.php?t=33796
It is English ROM so if you would like to continue to use Swedish OS, don't use it. If yes, you need to install Default_Prodigy_Nordic_keyboard_1102.sa.CAB package to change the hardware keyboard layout back to nordic. You will find this package from this zip file ftp://xda:[email protected]/ExtRom_1030712_121_10410_Qtek_NOR_Ship.rar. To get Swedish keyboard on your screen you should install Skandinavisk tastatur for PocketPC which you will find at http://www.epocket.no/tastatur/
/Priit
Hmm wonder whyI had 2 copys of my post here..oh well, thx for the info.
Will see what I will do, one question, what ROM version did you have prior to flashing into this one?
Have you seen much improvement, and if so with what?
And btw I believe my Qtek is unlocked already, I bought it straight from Qtek Sweden as a reseller.
thx / fahlis
Original ROM was 1.3.7.13 SVE but I had already upgraded to 1.6.2.4 WWE (T-Mobile version).
Your device is most definitely locked - it's not SIM locked, but country locked. Try to run ROM upgrade and you will find out.
/Priit
Ok, thx for the info, and what about the improvements?
Is it worth the effort to upgrade in your opinion?
/fahlis
fahlis said:
Ok, thx for the info, and what about the improvements?
Is it worth the effort to upgrade in your opinion?
/fahlis
Click to expand...
Click to collapse
I upgraded and am happy so far.
I got the so desired EDGE icon finally
Ok, Naughty, sounds like worth a try then
/fahlis
gdap said:
Total : 47.46MB
In use : 4.26mb
Free : 43.20MB
Everything seems much quicker compared to the K-jam rom I had previously. Used to hang quit a bit.
Click to expand...
Click to collapse
That is ROM!
I said RAM...
Anybody tell what is RAM total (Program); I have 49,97MB with ROM version: 1.1.7.5
Hi,
sorry if this question was asked but I could not find previous posts.
I would like to try newer ROMs on my Qtek S200, but before I'd like to backup the current, original, ROM (SPL 2.09.0000, Italian OS), just in case.
However, wizBackup (mtty 1.42) refuses to dump the ROM since the phone is not CID unlocked (the error is "You didn't get the proper security level to download a specific image"). AFAIK the only way to CID-unlock the prophet with SPL 2.xx it is to use the downgrade procedure explained elsewhere. However, in this way I would loose the original ROM before I could backup it!
Is there some way to dump the original ROM before downgrading to unlock the device?
ok, I'll ask an easier question, then
anyone has dumped (or knows from where to download) localised Qtek s200 ROMs (especially Italian)? I can find no download area at www.qtekcorp.com
Two people lookin'... indeed :lol:
I'm still having - after 3 months - the same two problems.
Has someone sorted them out ?
Thanks and excuse my bump
looking for the same thing.
I'll end up unlocking and upgrading my S200 without a backup of the original ROM. I doubt Qtek will release any upgrades since the device is quite old now.
It's a shame they did not even release the original rom for download.
So too bad, I'll take the risk and unlock the phone. I'm confident that the imate Italian ROM, though not very new, will work better than the one I have now.
My S200 is 6 months "old", and for the very first three months, it hasn't any support data on pocketdevice site because "too new".
Now is it obsolete and nobody will release anything for such brick ???
What a kind of policy is it ?
Thank you, but I think this is a dead-end policy for QTEK
Bye
Qtek S200 Original .Cab files?
Does anyone have access to the original .cab configuration files that came under the 2.09 Rom Ver. ?????
Trying to remove the Batt. & Comm Manger icon from the base of the screen.
Under the 2.09 version both icons were removed when the unit 1st configures its self and places a batt. icon on the top tool bar.
Not looking to install any additional program that monitors all of these items just want the original config .cabs that perform all of these task.
Please post link or notify via private msg, Thanks
read the wiki
the official and original 2.09 files are on the ftp server....
Jesterz said:
read the wiki
the official and original 2.09 files are on the ftp server....
Click to expand...
Click to collapse
Also in Spanish language????
Annita