Hi,
I have an XDA II and after an unfotunate dropping incident it ended up with a badly broken LCD. I purchased a screen from an orange m1000 from a chap on here.
When i recieved the screen i realised that they are slightly different part numbers:
o2 xdaII- 60H00022-00
M1000-60H00011-00
The connector also appear to be different and the orange one is slightly bigger.
Is there anyway the orange screen can be modified to fir the xda II?
Thanks
Paul.
Related
hi,
this is my first post. i have a major problem with my o2 xda mini s.
my lcd cracked so i replaced it with one i imported from taiwan (www.runpda.com).
the new display is blank but i know the phone is on because it responds to touch input. do i have to reinstall or flash the phone to get it to work or is it possibly a hardware incompatibility issue? any feedback is appreciated. thanks
hi,
this is my first post. i have a major problem with my o2 xda mini s.
my lcd cracked so i replaced it with one i imported from taiwan (www.runpda.com).
the new display is blank but i know the phone is on because it responds to touch input. do i have to reinstall or flash the phone to get it to work or is it possibly a hardware incompatibility issue? any feedback is appreciated. thanks
U made a mistake...contact Kaiser Electronics..Mr Javed 9821160515
the first thing i would check is that the ribbon type cable that connects into the motherboard from the screen is firmly in place.. i had the same with my c500 realised the cable goes further in than you first realise.
Cheers
Steve
I've just bougt myself a MDA Vario from someone who tried to upgrade it and screwed up his phone. After reading some treads on xda-developers I've fixed the phone . Now I've got a cheap Wizard but with a little problem.
When I've got the phone closed the colours on the display are normal. But when I slide out the keyboard and the sceen flips horizontal, than I get less colours. It's similar with a normal PC that that's changed to 265 colours mode.
The phone is flashed with the latest carrier rom.
Who can help me with this problem ?
Thank
I just find out that this problem has to do with a broken flatcable. I searched on Ebay for a replaceable flatcable but I can't find one. Does anybode knows where I can order a new one ?
Michiel
I replaced the screen on my 02 Orbit, but it still wouldnt work,
I then noticed there's actually 2 types,
One has the hole on back of screen in the middle
the other has the hole on back of screen at the side
The one on my Orbit had the hole at the side and I replaced it with
the new one but that had the hole in the middle,
Does anyone know if these 2 screens are interchangable or will I now
have to look for the other type of screen
hope that makes sense to someone
For whats its worth the new screen worked fine, it was the power button
that was the problem,
Its just that some sellers said that the orbit had 2 different screens (which it does) but you had to get the right one for your device
Technically i think that the difference is... O2 Orbit.. has a diffrent screen than HTC Artemis.. Though no major difference.. ITs just my opinion..
Hi all, my Hermes/JasJam LCD screen and front panel stopped working a while back with the whiting out issue, funny artifacts and non working buttons. I have pulled it apart quite a few times to make temporary solutions but none have lasted enough.
So now I'm looking to buy a used Hermes and jack the screen part off it and place it on mine. Now I know how to do this but what came to my mind was:
Buy the newer version of the Hermes and place it's front part on my old jasjam which would be like a mixed/modded Hermes.
So I saw the O2 Zinc and the TyTN II and i really like the front panels better than the original hermes ones. So, before I buy one of them, does someone know if the ribbon cable is the same as the original one that connects to the phone's mainboard?
Any help much appreciated!