Related
How can I stop Active Sync from always turning-on even when it is not connected to my PC?
I notice Active Sync always appears on the Running Programs in memory settings, so I always have to stop or close the file manually.
the way i did it is to Go to menu->add server source->write down any server address (fake)->complete procedure
then menu->schedule->switch to manual. Close activesync, reopen and delete server. Apparently this turns the scheduling (which is initially greyed out) to manual.
Hope it works for u2
Thanks apap for the quick response.
I followed your instructions. The longest option I saw was 4 hours, better than every 10 minutes, thus saving me some more time on my battery. I noticed that This quickly drains the battery if left to turn on every 10 minutes. Unless you have found a hidden option to manually turn it on even longer than 4 hours, did you?
the dropdown menus have a "Manually" item, but it is well hidden. You need to scroll up, not down.
lbendlin said:
the dropdown menus have a "Manually" item, but it is well hidden. You need to scroll up, not down.
Click to expand...
Click to collapse
Thanks very much!
Hi all,
I've been monitoring my memory usage to find out which application is using the most memory and which one is leaking. However, accidentallty, I found out that ActiveSync keep on starting itself and run in the background, taking about 300-400K.
I noticed this when I was trying to figured out why my memory seems to decrease when nothing is running (I didn't start any application). However, if I set the MEssaging application to check email every 15 minutes, ActiveSync seems to start itself every 15-30 minutes. This is shown in the "Running" program tab in the "Memory" applet (Control Panel).
I'll kill the ActiveSync process, then later on it'll come back again.
Does anyone know why is this? It's taking up my previous memory...
***********************************************************
* ACTIVESYNC 4.0 TURNS ON AUTOMATICALLY (DRAINS BATTERY): *
***********************************************************
1) Start up AS on your PDA.
2) Tap the menu tab/soft key and tap "Add Server Source"
3) Configure a server source with a dummy IP address, user id,
password and domain name; these do not have to be real.
4) Once configured you should have another sync source show up
on your main AS screen...continue on.
5) Tap the menu soft key again and you should see that the
sync schedule option is no longer greyed out.
6) Change your schedule from a timed automatic start of AS to
manual under both fields
7) If you try to sync now, AS will try to contact your imaginary
exchange server and that will take forever until it times out,
so you can now delete the exchange server from your list of
sync sources. Your changes to the sync schedule will remain and
will survive soft resets too.
Hi Dodger,
Thanks for your help! I am trying out your solution now and waiting (of course) for the SYnc to my "imaginary" Exchange Server to time out, since it takes ages to do so.
Just a quick question on Step 7 below:
"...so you can now delete the exchange server from your list of
sync sources. Your changes to the sync schedule will remain and
will survive soft resets too.
So you're saying that once I delete the Exhcange Server from my list, ActiveSync will no longer startup automatically but my regular Sync to AS4.1 on my desktop will stay the same?
Well,
I'm not sure about step 7. I've found these steps sometime on the Ineternet and don't know the author of it (forgot, sorry).
I never do step 7.
The procedure however works fine on my 2020 under WM2005.
I just deleted the Exchange Server from the List and so far ActiveSync hasn't started in my MDA yet. I'll keep monitoring and post if it start-up again.
Cheers!
stopping activesync
is there a way to stop activesync from running in background on my 8525? my pda freezes every once in awhile and have problems with connecting to pc. to connect to pc i have to go to memory and shut off activesync before plugging in usb. i've tried to delete repllog.exe in the notification queue with no luck. help LuXx
Reducing lock-ups and freezing:
A key consideration here is the active sync application that is linked with many lock up problems - particularly overnight or during active syncs auto scheduling process.
A quick way to temporarily shut Active Sync down (as well as any other programmes running in the background) would be say Magic Button or HTC X Button which are quicker than using the running programmes in the memory menu to do this.
However Active Sync can start again by itself via various scheduling routines. There is a way to prevent this known as the "Fake Server Trick":
This 'server trick' was discovered by an Aximsite forum member known as Invid
This post originally created by IamNotMe fourpages.co.uk (Adapted)
"1. Turn on your Device
2. Go to Start > Programs > Activesync. This will open the Activesync program.
3. Tap Menu at the bottom right hand corner of the screen. This will bring up the Options Menu. Notice the option Schedule... is greyed out? This is the all-critical option we need to get access to. But as it's disabled we can't change Activesync's default synchronisation schedule.
Ok, so how do we enable the Schedule option? Easy!!! Fool Activesync into thinking there is an Exchange Server to sync with:
1. From Activesync's Menu tap on Add Server Source.
2. In the following screens you can enter any old garbage. It does not matter, but just in case your unsure, just type the following in the indicated boxes:
Server Address: fake
Tap Next
User name: fake
Password: fake
Domain: fake
(Ticking save password or going into the Advanced menu makes no difference, so no need to bother).
Tap Next
Untick all of the 'Data you want to synchronise' options
Tap Finish
3. Ok, we're done creating the server. You should now see in Activesync's main screen your normal Activesync connection(s), and a new connection called Exchange Server.
4. Go back into the Menu, and lo and behold the Schedule option is now enabled! Go ahead and tap it!
5. You will see that both options in the Schedule screen may be set to Every 5 Minutes
6. Using the drop downs, change both the Peak times and Off-peak times boxes to Manually.
7. Press the OK button at the top right of the screen.
Congratulations! Activesync is now gagged from opening on it's own and ruining your life! Your work is not done just yet though - time to clean up and get rid of the now unwanted fake Exchange Server.
1. Go back into Activesync's Menu, then Tap Options.
2. Highlight Exchange Server, then tap Delete. A warning message will appear about removing files etc, but as you have no files associated with the fake Exchange Server, it's nothing to worry about - just tap Ok.
Edit: Some people have reported that settings "stick" better if you Do Not delete the fake server just leave it, it does not actually do anything anyway - it was just a way to set active sync to manual operation not automatic. Item 3 below, if you leave it in place will therefore show two Sync Connections i.e. the real and the fake.
3. The list will now only show your remaining PC Sync connection(s). Obviously do not delete these!"
You should also:
A
ensure Active sync is turned off fully after use. Use the likes of Magic Button say or HTC X Button to do this.
B
consider using a scheduler to perform a soft reset automatically say before any alarms go off in the morning. This ensures unwanted programmes like active sync and others do not crash the system when the alarms go off or crash the device when you try to switch on. SKSchema or xbar would fit the bill for this.
C
Avoid leaving device on charge overnight.
D
Running only one or two Today Plugins and avoiding some apps that like to synchronise automatically with internet sources push mail / weather etc. (although with a good neat set up these can operate ok)
E
ensure any applications required on wake up are installed to Main memory (today plug ins, wallpapers etc), with all others installed to SD Card
F
Do not overfill main memory Hermes performs better with a good bit of spare space.
G
Do NOT let your device go to sleep by itself! Always use the on/off button to put it in sleep mode. In fact I would go further and suggest you go to:
Start>settings>system>power>advanced and remove the ticks in the two little boxes.
Just remember to use that on off button. Of course the device should be able to sleep by itself BUT this XDA does not perform well and often crashes if you let it sleep automatically.
H
Always use a task manager to close running applications. You can go into settings, running programmes to do this but it is far easier to have running programmes shown in your task bar and an easy way to fully close them. (That is what a task manager does).
I
Regularly clear out the PIE cache or better still move your Internet Cache to the SD Card. Use a Registry Editor (PHM Registry Editor http://www.phm.lu/Products/PocketPC/RegEdit/)
PocketIE Cache in storage card
Create these folders:
\Storage Card\Pocket IE\Temporary Internet Files\Storage Card\Pocket IE\Cookies\Storage Card\Pocket IE\HistoryAdd the following registry keys, string data type:
[HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders]"Cache"="\Storage Card\Pocket IE\Temporary Internet Files""Cookies"="\Storage Card\Pocket IE\Cookies""History"="\Storage Card\Pocket IE\History"
Links
Magic Button: (Task Manager)
http://www.trancreative.com/mb.aspx
HTC X Button (Task Manager)
HTC X-Button.CAB
X BAR
http://www.pocketgear.com/software_detail.asp?id=20823
SKschema
http://www.pocketgear.com/software_detail.asp?id=20385
Mike
thats what i needed . thank you!!!
LuXx said:
is there a way to stop activesync from running in background on my 8525? my pda freezes every once in awhile and have problems with connecting to pc. to connect to pc i have to go to memory and shut off activesync before plugging in usb. i've tried to delete repllog.exe in the notification queue with no luck. help LuXx
Click to expand...
Click to collapse
In addition to the fake server trick, I also saw last night something about turning off "advanced network functionality" in Start>Settings>Connections>USB to PC.
I just unchecked it within the last 24 hours, but I'm hoping it will have a positive effect on this kind of problem.
Just to clear this up, this *trick* will also stop activesync from launching even when I'm not connected via USB. I notice through out the day I will close activesync 5 or 6 times (I use magic button) it seems to like to launch on it's own, I suspect this auto scheduling was the cause.
yeah it does work well... the only time active sync pops up is right after a soft-reset (it's not in startup folder so i don't know where it's being lanuched from) and when you plug it into the computer (which is fine). Other than that it stays close and the phone runs a lot faster and has more free RAM when active sync is not running. Again, another no-brainer performance fix the OS and Phone Mfg'rs completely missed!
DirectPush?
But if I am using DirectPush, how does this help me?
perlmane said:
But if I am using DirectPush, how does this help me?
Click to expand...
Click to collapse
Well is doesn't really as you need active sync running!
Mike
Wow. This is brilliant, thanks!
db
mikechannon said:
Well is doesn't really as you need active sync running!
Mike
Click to expand...
Click to collapse
Something wierd happened. I had to do a hard reset. Since it recovered from that, I cannot use DirectPush anymore. The ActiveSync choices no longer list "As items arrive" as a choice. It only lists the time choices and manual. How do I restore the "As items arrive" option?
After hard-reset the activesync connection wth your pc is erased. Erase all activesync connections both on PC and on device and reconnect them via usb and after "pairing" you will have back your options. Prior that deselect 'advanced network functionality' in connections>USBtoPC
Teo2005 said:
After hard-reset the activesync connection wth your pc is erased. Erase all activesync connections both on PC and on device and reconnect them via usb and after "pairing" you will have back your options. Prior that deselect 'advanced network functionality' in connections>USBtoPC
Click to expand...
Click to collapse
I did this and saw the "As items arrive" item appear and then leave the list of choices. Any other ideas?
Great Trick
mikechannon said:
Reducing lock-ups and freezing:
A key consideration here is the active sync application that is linked with many lock up problems - particularly overnight or during active syncs auto scheduling process.
A quick way to temporarily shut Active Sync down (as well as any other programmeds running in the background) would be say Magic Button or HTC X Button which are quicker than using the running programmes in the memory menu to do this.
However Active Sync can start again by itself via various scheduling routines. There is a way to prevent this known as the "Fake Server Trick":
That is a great help. My Cingular 8525 is much more stable after running the trick. However, I did notice that from time to time, Active Sync could be found running even after the "Fake Server Trick." Is this normal? Should I redo the "Fake Server Trick" from time to time or is once enough?
Sincerely,
Steve
Click to expand...
Click to collapse
uhh..un-plug ur cable?
shapirosj said:
mikechannon said:
Reducing lock-ups and freezing:
A key consideration here is the active sync application that is linked with many lock up problems - particularly overnight or during active syncs auto scheduling process.
A quick way to temporarily shut Active Sync down (as well as any other programmeds running in the background) would be say Magic Button or HTC X Button which are quicker than using the running programmes in the memory menu to do this.
However Active Sync can start again by itself via various scheduling routines. There is a way to prevent this known as the "Fake Server Trick":
That is a great help. My Cingular 8525 is much more stable after running the trick. However, I did notice that from time to time, Active Sync could be found running even after the "Fake Server Trick." Is this normal? Should I redo the "Fake Server Trick" from time to time or is once enough?
Sincerely,
Steve
Click to expand...
Click to collapse
There are one or two applications that you may run that can restart ASync, various mail apps, online time sync apps and yes plugging in the cable to do a manually state ASync. Once started AS contines to run at least until a soft reset or using your task manager, you shut it down again. So routinely after doing an AS it will need shutdown.
Whether you need to do another round of the Active Server Trick has been debated recently. It seems that for some folks if they follow up the procedure with the step that says to delete the Fake Server because its job is done; find later that doing this causes the wanted change to manual ASync not to stick.
As the fake server, if set up correctly, does not actually connect to anything, then those who wish may re run the trick. This time not deleting the fake server at the end.
Mike
Click to expand...
Click to collapse
activesync still not working
After following the procedure with the "fake" server name, my sync does not work. In fact, I cannot locate the "exchange server" at all on the screen. Do I have to reload the cd-rom program from scratch? Any suggestions...
Thanks
abricko said:
yeah it does work well... the only time active sync pops up is right after a soft-reset (it's not in startup folder so i don't know where it's being lanuched from) .....
Click to expand...
Click to collapse
Yep, I notice it's there after a soft reset as well. Is there a way to prevent that as well with a regedit?
I did the fake server trick, deleted the fake server, but didn't do a soft reset. I noticed that AS still loads on its own. I respecified the fake server but left it on this time. Hopefully it stays shut off...so annoying.
Linda
HOW TO STOP ACTIVESYNC FROM TURNING ITSELF ON ALL THE TIME:
MOD EDIT HDuser
This thread has gone WIKI and can be found under
added to wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Tweaks
END MOD Edit
(I've rewritten this for the HTC HD and I works Brilliantly well).
Active Sync can start again by itself via various scheduling routines. There is a way to prevent this known as the "Fake Server Trick":
This 'server trick' was discovered by an Aximsite forum member known as Invid
This post originally created by IamNotMe fourpages.co.uk (Adapted by me for HD)
"1. Turn on your Device
2. Go to Start > Programs > Activesync. This will open the Activesync program.
3. Tap Menu at the bottom right hand corner of the screen. This will bring up the Options Menu. Notice the option Schedule... is greyed out? This is the all-critical option we need to get access to. But as it's disabled we can't change Activesync's default synchronisation schedule.
Ok, so how do we enable the Schedule option? Easy!!! Fool Activesync into thinking there is an Exchange Server to sync with:
1. From Activesync's Menu tap on Add Server Source.
Enter any email and untick box then click next.
2. In the following screens you can enter any old garbage. It does not matter, but just in case your unsure, just type the following in the indicated boxes:
Server Address: fake
Leave box ticked and Tap Next
User name: fake
Password: fake
Domain: fake
Leave box ticked and Tap Next
Untick all of the 'Data you want to synchronise' options
Tap Finish
3. Ok, we're done creating the server. You should now see in Activesync's main screen your normal Activesync connection(s), and a new connection called Exchange Server.
4. Go back into the Menu, and lo and behold the Schedule option is now enabled! Go ahead and tap it!
5. You will see that both options in the Schedule screen may be set to Every 5 Minutes
6. Using the drop downs, change both the Peak times and Off-peak times boxes to Manually.
7. Press the OK button at the top right of the screen.
Congratulations! Activesync is now gagged from opening on it's own and ruining your life! Your work is not done just yet though – time to clean up and get rid of the now unwanted fake Exchange Server.
1. Go back into Activesync's Menu, then Tap Options.
2. Highlight Microsoft Exchange, then tap Delete. A warning message will appear about removing files etc, but as you have no files associated with the fake Microsoft Exchange, it's nothing to worry about – just tap Ok.
3. The list will now only show your remaining PC Sync connection(s). Obviously do not delete these!"
Note: some users say it works better if you leave the fake server there (undeleted). Not the case for me, however, it does no harm to leave it undeleted as it is totally inactive and has no effect.
PS. If you connect your HD to your PC with USB cable, ActiveSync will start automatically and everything will sync up as usual (I tried it). But after you disconnect, click the Task Manager button at top right corner of HD Flo home screen and tap the X next to ActiveSync to close active sync.
My Results: Processor & working memory usage is significantly decreased, battery lasts longer and ActiveSync is not trying to sync all the time.
This does not work for me.
i think it's because you remove the exchange server. If you don't remove the fake exchange server, the schedule option remains. If you remove the fake exchange server, the schedule option is gone again.
Thanks dude, nice tutorial, worked perfectly.
Was getting around 36%, performed the tutorial, rebooted and came up with 28%. First time that has happened.
Cheers
You got that 28% just cause TF3D wasn't on yet
or maybe you just disabled it ?
28%, do you guys mean the memory consumption? i get about 45%....... you guys haven't installed anything on your hd? i got lots of stuff, like gyrator2, icontact, thumbcal, s2u2, and mail synchronisation and stuff running in the background......
markqld said:
HOW TO STOP ACTIVESYNC FROM TURNING ITSELF ON ALL THE TIME:
Congratulations! Activesync is now gagged from opening on it's own and ruining your life! Your work is not done just yet though – time to clean up and get rid of the now unwanted fake Exchange Server.
1. Go back into Activesync's Menu, then Tap Options.
2. Highlight Microsoft Exchange, then tap Delete. A warning message will appear about removing files etc, but as you have no files associated with the fake Microsoft Exchange, it's nothing to worry about – just tap Ok.
3. The list will now only show your remaining PC Sync connection(s). Obviously do not delete these!"
PS. If you connect your HD to your PC with USB cable, ActiveSync will start automatically and everything will sync up as usual (I tried it). But after you disconnect, click the Task Manager button at top right corner of HD Flo home screen and tap the X next to ActiveSync to close active sync.
Click to expand...
Click to collapse
mouki_9 said:
i think it's because you remove the exchange server. If you don't remove the fake exchange server, the schedule option remains. If you remove the fake exchange server, the schedule option is gone again.
Click to expand...
Click to collapse
mouki_9 is right. You don't have to delete the fake exchange server in order to work fine. In my HD I have kept the fake exchange server and it works.
In order to close ActiveSync when you unplug the dfevice, install elias ActiveSync Killer. That solves the problem.
Merry Christmas and Happy New Year to all of you
28% yes memory consumed. It did go up to 36% again after I opened and closed an application.
Anyway, it's good to get rid of that active sync, no point having it on if it isn't being used
ktsak said:
mouki_9 is right. You don't have to delete the fake exchange server in order to work fine. In my HD I have kept the fake exchange server and it works.
In order to close ActiveSync when you unplug the dfevice, install elias ActiveSync Killer. That solves the problem.
Merry Christmas and Happy New Year to all of you
Click to expand...
Click to collapse
may b it is better for the topic starter to change the tutorial, i think a lot of the users will be disappointed to see it doesn't work after they deleted the exchange mail. It is a very VERY good solution. My battery drain also is less than before, which is caused by the active sync i think.....
mouki_9 said:
may b it is better for the topic starter to change the tutorial,...
Click to expand...
Click to collapse
I edited the originl,thanks.
markqld said:
I edited the originl,thanks.
Click to expand...
Click to collapse
outstanding. thanks
I deleted the fake account and active sync became active again all the time, it reverted to how the situation was originally.
So for me I have to keep the fake account, no problem.
markqld said:
HOW TO STOP ACTIVESYNC FROM TURNING ITSELF ON ALL THE TIME:
(I've rewritten this for the HTC HD and I works Brilliantly well).
Active Sync can start again by itself via various scheduling routines. There is a way to prevent this known as the "Fake Server Trick":
This 'server trick' was discovered by an Aximsite forum member known as Invid
This post originally created by IamNotMe fourpages.co.uk (Adapted by me for HD)
"1. Turn on your Device
2. Go to Start > Programs > Activesync. This will open the Activesync program.
3. Tap Menu at the bottom right hand corner of the screen. This will bring up the Options Menu. Notice the option Schedule... is greyed out? This is the all-critical option we need to get access to. But as it's disabled we can't change Activesync's default synchronisation schedule.
Ok, so how do we enable the Schedule option? Easy!!! Fool Activesync into thinking there is an Exchange Server to sync with:
1. From Activesync's Menu tap on Add Server Source.
Enter any email and untick box then click next.
2. In the following screens you can enter any old garbage. It does not matter, but just in case your unsure, just type the following in the indicated boxes:
Server Address: fake
Leave box ticked and Tap Next
User name: fake
Password: fake
Domain: fake
Leave box ticked and Tap Next
Untick all of the 'Data you want to synchronise' options
Tap Finish
3. Ok, we're done creating the server. You should now see in Activesync's main screen your normal Activesync connection(s), and a new connection called Exchange Server.
4. Go back into the Menu, and lo and behold the Schedule option is now enabled! Go ahead and tap it!
5. You will see that both options in the Schedule screen may be set to Every 5 Minutes
6. Using the drop downs, change both the Peak times and Off-peak times boxes to Manually.
7. Press the OK button at the top right of the screen.
Congratulations! Activesync is now gagged from opening on it's own and ruining your life! Your work is not done just yet though – time to clean up and get rid of the now unwanted fake Exchange Server.
1. Go back into Activesync's Menu, then Tap Options.
2. Highlight Microsoft Exchange, then tap Delete. A warning message will appear about removing files etc, but as you have no files associated with the fake Microsoft Exchange, it's nothing to worry about – just tap Ok.
3. The list will now only show your remaining PC Sync connection(s). Obviously do not delete these!"
Note: some users say it works better if you leave the fake server there (undeleted). Not the case for me, however, it does no harm to leave it undeleted as it is totally inactive and has no effect.
PS. If you connect your HD to your PC with USB cable, ActiveSync will start automatically and everything will sync up as usual (I tried it). But after you disconnect, click the Task Manager button at top right corner of HD Flo home screen and tap the X next to ActiveSync to close active sync.
My Results: Processor & working memory usage is significantly decreased, battery lasts longer and ActiveSync is not trying to sync all the time.
Click to expand...
Click to collapse
Hi,
I tried both options, keeping and deleting the fake server, but no help my memory never showed less than 45%, and every five minutes or so, i can see activesync in task manager, though i have set it to 4 hours, this is the maximum i can set, i don't have manual option...
Please help me.
Thanks.
Any way/program to kill the activesync automatically several seconds after the usb cable is unplugged from the phone?
SmartMan2583 said:
Hi,
I tried both options, keeping and deleting the fake server, but no help my memory never showed less than 45%, and every five minutes or so, i can see activesync in task manager, though i have set it to 4 hours, this is the maximum i can set, i don't have manual option...
Please help me.
Click to expand...
Click to collapse
'Manually' is at the TOP of the drop-down lists.
I also unticked the boxes in this window (not that it makes much difference)
I tried it. I let the fake exchange server otherwise activesync comes back always... no it's ok. But not tried to sync. my phone yet...
Ciao
Fred
With the HD I also have to keep the fake server in the list, if I remove it the manual setting also stops working. Weird but not a problem for me.
Thanks..
markqld said:
'Manually' is at the TOP of the drop-down lists.
I also unticked the boxes in this window (not that it makes much difference)
Click to expand...
Click to collapse
Stupid me , i did it, hope it works....!!! Thank you bro....
Thanks. It worked fine here. I left the fake server.
My memory improved by 1 -3%. I'm sure the battery will last a bit longer now.
However, even with no programs running, my memory is still at 36%!!! I hardly have any programs installed! Man, how do you do it so that it drops to 28% or less?
The only programs installed are (and currently none are running in Task Manager):
- Google Maps (was already there)
- Battery icon fix to get green percentage battery
- Massimo Colored Top Bar
- Mobipocket Reader
- Manila Calculator skin
- tnyynt SD card TuneUP
- TomTom Navigator
- SoftReset
- PHM Registry Editor
- Duality Software HandySync for PPC
Awesome OP i got my memory consumtion from 36% when active syc was always running to 26% after a soft reset, .
apps installed
coreplayer 2.5
garmin xt
hd tweak 5.4 including hd soft reset
igo 8
nodata
klaxton alarm programe
tnyynt SD card TuneUP
Hi,
I have just updated to a windows 6.5 htc diamond2(htc pure) phone and previously i was using htc mda III with windows 5. My rom is default offical rom by at&T.
I am facing 2 problems regarding automatic sending/receiving of emails using new outlook on window 6.5(htc diamond2):
1) I cannot enter send/receive time interval into an input box as there is no option for this and i have to select the time interval only from dropdown list, which include send/receive Every 5 minutes, 10 minutes, 1 hr , 1 day and so on.. But i want to use outlook with automatic send/receive every 2 minutes and this option is not there is dropdown list of new outlook. Previously in windows 5 , there was a input box in outlook settings where we can ourself enter a numeric value for setting the time interval in minutes after which phone automatically send /receve mail. So any idea how to add send/receive every 2 minutes option in dropdown list of outlook in windows 6.5?
2) Previously when my phone display goes off(maybe phone goes in sleep/standby mode) after few secs of non usage the automatic send/receive part of outlook was still working in background and i use to get email message even when phone was in pocket , but in windows 6.5 i have to tap and wake the phone up manually and then automatic send/receive will work if the phone is awake.So automatic send/receive will not get emails when phone is in sleep/standby mode. This seems to be a big problem it was not there in windows 5. Any idea how to resolve this part?
It seems to me that window 5 was better in regards to above to 2 points. can we install windows 5 on htc diamond 2 ?
Any help in rectifying the above problem will be highly appreciated.
Thanks in advance.
can anyone plz help with this
can one plz help with this, is there any registry changes that can modify this?
Thanks
I have the same doubts :/
leonardors said:
I have the same doubts :/
Click to expand...
Click to collapse
Push Internet delivers when the e-mail hits the server, why set it to 2 minutes? What is the purpose?
Bruce Inman said:
Push Internet delivers when the e-mail hits the server, why set it to 2 minutes? What is the purpose?
Click to expand...
Click to collapse
Push Internet has nothing to do with this. All it does is refreshing the content of your HTC Sense bookmarks.
Back to the topic: I wonder what was your battery life with every 2 minutes of checking the emails, 5 minutes are more than enough IMHO. If not satisfied, try switching to some push mail solution, bad news is that the only officially supported stuff is MS Exchange (which is not free). Other alternatives don't seem to be stable and, you can't rely on them.
I use WM 6.5 myself on my Topaz and the problem you mentioned about not getting the emails while in sleep mode doesn't seem to be present. My emails arrive all the time, in a 30 minute interval (just like I set it). This seems to be a reg tweak made by ATnT or something. I suggest you to reset your device to factory settings and if it doesn't help, simply switch to another ROM. I use the Dutty's Holy Grail and I'm very satisfied. Contains the latest Sense from HD2 and runs pretty fast and reliably.
Mehedict said:
Push Internet has nothing to do with this. All it does is refreshing the content of your HTC Sense bookmarks.
Back to the topic: I wonder what was your battery life with every 2 minutes of checking the emails, 5 minutes are more than enough IMHO. If not satisfied, try switching to some push mail solution, bad news is that the only officially supported stuff is MS Exchange (which is not free). Other alternatives don't seem to be stable and, you can't rely on them.
I use WM 6.5 myself on my Topaz and the problem you mentioned about not getting the emails while in sleep mode doesn't seem to be present. My emails arrive all the time, in a 30 minute interval (just like I set it). This seems to be a reg tweak made by ATnT or something. I suggest you to reset your device to factory settings and if it doesn't help, simply switch to another ROM. I use the Dutty's Holy Grail and I'm very satisfied. Contains the latest Sense from HD2 and runs pretty fast and reliably.
Click to expand...
Click to collapse
Yes, you're right, what I meant was Push Mail, through gmail as exchange server.
I do not set my device up to check at intervals, it gets pushed to my device when the e-mail hits the google server.
2) Previously when my phone display goes off(maybe phone goes in sleep/standby mode) after few secs of non usage the automatic send/receive part of outlook was still working in background and i use to get email message even when phone was in pocket , but in windows 6.5 i have to tap and wake the phone up manually and then automatic send/receive will work if the phone is awake.So automatic send/receive will not get emails when phone is in sleep/standby mode. This seems to be a big problem it was not there in windows 5. Any idea how to resolve this part?
Click to expand...
Click to collapse
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL
change "DisableSMSWakeUpEvent" to 0