Hello,
I have a two month old XDA II unlocked on wich the glass top is broken. the LCD is intact and the unit powers on. The LCD is fully functional but the glass top is cracked. If someone is intersted in buying it or need photos please contact me at : [email protected]
regards
Hi, I dropped the tytn to the floor, which usually doesn't affect it, but this time the plastic lens cracked. Which I guess the the warranty doesn't cover.
Any brilliant ideas on how to fix this?
I've buyed only Touch Screen lens
and not the entire display, I've open the PDA and changed the broken one.
It costs only 15 $. The only problem for you is the Warranty.
Mine broke as well. I took a new CD or DVD case and made a new one. Since it is polycarbonate it won't brake so far but scratch sensitive
edit: it was the rear camera but it should also work on the front cam
Where did you buy a new lens? How did you make a new one?
Just cut it out from a CD case and and file it to a round form.
The digitizers on eBay prob aren't gorilla glass, right? Can you get replacement that is real?
Did you replace it or not? i am interested in how you brake it considering it is gorilla glass. How much force need to brake it?
dropping Gorillia Glass in the wrong angle will break it!
True. Mine got dropped on the upper left edge of the phone(and it was from the height of 1m or less) and it got shaterd. Now I am searching for replacement. The phone and the screen still work but it just looks ugly.
edit* my post doesn't apply for this thread lol but it seems defy is brickproof also.
yes it can broke, it's just scratch resistant, not broke-into-pieces resistant.
Yep, I can confirm it's not shatterproof!
Hi everyone,
I just received my new digitizer from Ecell and it's glass, not plastic, so so far so good.
However, does anyone know how to fit it to the phone ? I'm not sure if it comes with adhesive or not (didn't look at it in detail) and how to remove the old digitizer without damaging the phone ?
thanks,
Arnaud.
If I'm not mistaken someone here in XDA had already open up the Defy. Search and you find it. But you will need to replace the front casing as well once you opened up your Defy..
Or you can follow this site guide Here
Ok everyone, I looked into this a bit deeper.
The digitizer I got from ebay selle Ecell looks genuine. It has the same serial number as the original and everything looks exactly the same. For those looking for a genuine Gorilla Glass replacement digitizer, I think we've found it.
There is no adhesive though and I am still looking for something suitable.
Farsight, you DONT have to replace the front casing once you've opened up the Defy. Or at least I don't see why you should.
Anyway, I'll keep you up to date as soon as my defy is back in action.
Cheers,
Arnaud.
ZookNC said:
Ok everyone, I looked into this a bit deeper.
The digitizer I got from ebay selle Ecell looks genuine. It has the same serial number as the original and everything looks exactly the same. For those looking for a genuine Gorilla Glass replacement digitizer, I think we've found it.
There is no adhesive though and I am still looking for something suitable.
Farsight, you DONT have to replace the front casing once you've opened up the Defy. Or at least I don't see why you should.
Anyway, I'll keep you up to date as soon as my defy is back in action.
Cheers,
Arnaud.
Click to expand...
Click to collapse
If I'm not mistaken, the idea for changing the front casing is to ensure the phone remains water resistant.
Trying to replace broken gorilla glass
Here is a video of me trying to replace the broken glass on my Defy. The replacement was successful although the final result got dirty from the glue I used.
A better solution would be to replace the whole front housing with speaker, glass and digitizer. Anyone knows where one can by a complete Defy front housing?
I bought mine from no.1-tech on ebay and it looks genuine to me, too. Did yours come in a plastic bag that says "resealable" and has a sort of glue strip to close it?
Btw, globaldirectparts has everything, the digitizer, the adhesive, complete front and back housing etc. but the minimum amount of 5pcs per item is kind of a turn-off...
Yes, mine came in a resealable plastic bag with a glue strip as well.
I ended up buying some two sided tape and I cut strips to fit where the original adhesive was. It all looks very clean but now the proximity sensor doesn't work properly and the screen turns off whenever I make or answer a call. It turns back on when I press on the screen in the top left hand corner. I tried searching for a way to recalibrate the proximity sensor but I haven't found anything that works on the Defy.
If anyone has any idea on how to do this (and I'm pretty sure it's possible), could you please let everyone know?
Thank you
Cheers,
Arnaud.
I found this one.
http://cgi.ebay.co.uk/Motorola-Defy...K_Replacement_Parts_Tools&hash=item3cb8dd71f8
Don’t know anything about the dealer though
nice info, i dont know if we can change the glass. i thought before if we broke the glass, means we broke the LCD
jovus said:
True. Mine got dropped on the upper left edge of the phone(and it was from the height of 1m or less) and it got shaterd. Now I am searching for replacement. The phone and the screen still work but it just looks ugly.
Click to expand...
Click to collapse
Happened the same to me. from 1 meter. i got the glass from ebay yesterday.
torgil said:
Here is a video of me trying to replace the broken glass on my Defy. The replacement was successful although the final result got dirty from the glue I used.
A better solution would be to replace the whole front housing with speaker, glass and digitizer. Anyone knows where one can by a complete Defy front housing?
Click to expand...
Click to collapse
From the video. Best still to change the whole front casing together with the glass screen. It's very dirty in the end and surely the water resistant would not work anymore.
Did your Defy managed to power up? I see the video look like it's dead??
Sent from my awesome Moto Defy Gingerbread 2.3.3 - XDA Premium
Yes, the phone did power up - battery was empty.
The phone is working ok but, as you mentioned, the glass got very dirty. Using another type of glue and being a bit more exact when fixing the new glass to the front housing might have given better result.
As for the water reistance I'm already convinced that the defy is water resistant but the front speaker is not. Already got two front speakers replaced because of water damage.
I'm looking for a front housing with glass and speaker. I've already tried to replace the speaker om another defy but that was not so easy because the speaker is glued to the front.
Where are the parts for sale? Got my front glass also broken. Saw the front glass already on AliExpress. But think the back glass in front of the back camera will break when unmounting. Any suggestions where to buy the front and back glass?
Sent from my Nexus 6P using Tapatalk