Database Users

upgrading the xda 2 help

hi guys
i have been trying to upgrade my xda2 but i dont seem able to do it can any of you help please as it is driving me around the bend i have read dcs,s post ( thanks dcs ) but i still cant do it i have attached what happens on the command prompt help
thanks in advance kev

here is the attachment
xda2nbftool -sd PH10 -so <02> -sl <language> NK.nba
xda2nbftool -sd PH10 -so <02> -sl <language> ms_.nba
xda2nbftool -sd PH10 -so <02> -sl <language> Radio_.nbaMicrosoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Owner>xda2nbftool -x NK.nbf NK.nba 0x20040304
WARNING: checksum is not ok, possibly you provided the wrong password
C:\Documents and Settings\Owner>xda2nbftool -x ms_.nbf ms_.nba 0x20040305
WARNING: checksum is not ok, possibly you provided the wrong password
C:\Documents and Settings\Owner>xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306
da2nbftool -x NK.nba nk.nbf 0x89124137
too many args
Usage: xda2nbftool [-u] { -c | -e | -d } inputfile outputfile password
-c : calculate crcsum of file
-u : updates the calculated checksum
-e : encrypt inputfile
-d : decrypt inputfile
-x : xor inputfile with password ( should be a number )
-sd : change devicetype
-so : change operatorname
-sl : change language
-sv : change version
-v : verbose
HimaUpgradeUt v0400, v0500 use password HTC
HimaUpgradeUt v0600 uses password 921211
HimaUpgradeUt v0910 uses xor with 0x89124137, 0x25863614 or 0x12345678
HimaUpgradeUt v1000 uses xor with 0x20040304, 0x20040305 or 0x20040306
C:\Documents and Settings\Owner>xda2nbftool -x ms_.nba ms_.nbf 0x25863614
WARNING: this does not look like a nbf header, possible you provided the wrong
assword
C:\Documents and Settings\Owner>xda2nbftool -x radio_.nba radio_.nbf 0x12345678
radio_.nba: No such file or directory
C:\Documents and Settings\Owner>xda2nbftool -e nk.nba nk.nbf 921211
WARNING: this does not look like a nbf header
WARNING: checksum is not ok
C:\Documents and Settings\Owner>copy /y ms_.nba ms_.nbf
1 file(s) copied.
C:\Documents and Settings\Owner>copy /y radio_.nba radio_.nbfxda2nbftool -x NK.
ba nk.nbf 0x20040304
The system cannot find the file specified.
C:\Documents and Settings\Owner>xda2nbftool -x ms_.nba ms_.nbf 0x20040305
WARNING: checksum is not ok, possibly you provided the wrong password
C:\Documents and Settings\Owner>xda2nbftool -x radio_.nba radio_.nbf 0x20040306

Which ROM are you trying to upgrade to?

help on upgrade

hi
the latest from 02 i have downloaded and tried but i keep getting the country error. i have also downloaded your rom and same thing happens. i am currently running
rom 1.72.00 wwe
radio 1.17.00
protocol version 1337.28
ext rom 1.72.181
i have only just realised the ext rom version is the same as the rom version i am trying to upgrade to are they the same. also the upgrade suite doesent work i have downloaded the individual software in the new rom but only some of it installed.
regards kev

Do you mean that when you attempt to upgrade you are getting a Country ID error?
If so, try looking at my post here - it may help you.

yes but i have followed your posts and i havent had any sucess i dont know if its me or the files i have aattached the command prompt blurb but i still dont under stand.
xda2nbftool -sd PH10 -so <02> -sl <language> NK.nba
xda2nbftool -sd PH10 -so <02> -sl <language> ms_.nba
xda2nbftool -sd PH10 -so <02> -sl <language> Radio_.nbaMicrosoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Owner>xda2nbftool -x NK.nbf NK.nba 0x20040304
WARNING: checksum is not ok, possibly you provided the wrong password
C:\Documents and Settings\Owner>xda2nbftool -x ms_.nbf ms_.nba 0x20040305
WARNING: checksum is not ok, possibly you provided the wrong password
C:\Documents and Settings\Owner>xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306
da2nbftool -x NK.nba nk.nbf 0x89124137
too many args
Usage: xda2nbftool [-u] { -c | -e | -d } inputfile outputfile password
-c : calculate crcsum of file
-u : updates the calculated checksum
-e : encrypt inputfile
-d : decrypt inputfile
-x : xor inputfile with password ( should be a number )
-sd : change devicetype
-so : change operatorname
-sl : change language
-sv : change version
-v : verbose
HimaUpgradeUt v0400, v0500 use password HTC
HimaUpgradeUt v0600 uses password 921211
HimaUpgradeUt v0910 uses xor with 0x89124137, 0x25863614 or 0x12345678
HimaUpgradeUt v1000 uses xor with 0x20040304, 0x20040305 or 0x20040306
C:\Documents and Settings\Owner>xda2nbftool -x ms_.nba ms_.nbf 0x25863614
WARNING: this does not look like a nbf header, possible you provided the wrong
assword
C:\Documents and Settings\Owner>xda2nbftool -x radio_.nba radio_.nbf 0x12345678
radio_.nba: No such file or directory
C:\Documents and Settings\Owner>xda2nbftool -e nk.nba nk.nbf 921211
WARNING: this does not look like a nbf header
WARNING: checksum is not ok
C:\Documents and Settings\Owner>copy /y ms_.nba ms_.nbf
1 file(s) copied.
C:\Documents and Settings\Owner>copy /y radio_.nba radio_.nbfxda2nbftool -x NK.
ba nk.nbf 0x20040304
The system cannot find the file specified.
C:\Documents and Settings\Owner>xda2nbftool -x ms_.nba ms_.nbf 0x20040305
WARNING: checksum is not ok, possibly you provided the wrong password
C:\Documents and Settings\Owner>xda2nbftool -x radio_.nba radio_.nbf 0x20040306
its beyond me i am seriously thinking about forgetting doing it and leave it as it is.
regards kevin

OK. The output in the DOS prompt above looks kinda all over the place. You have copied files over other ones, etc and its hard to tell the order in which you have done things.
You need to start again with an untouched set of nbf files. Then follow the instructions in my post in the correct order.

GPRS Monitor on I-mate with 1.72

Dear All, I have some problems after installing the 1.72 ROM on my device.
I would be very thankful, if you could give me some instructions and support on my problems.
First of all, I had the T-mobile MDA 2 device with the ROM number 1.60.
I had some troubles after installing a couple of different programs, it looked like I had no signal or warning when receiving a call, and the device hanged up at these moments.
So, I decided to download and install the newer ROM ver.1.72 from I-mate.
Then I used xda2nbftool to convert the details for my T-mobile:
xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x ms_.nbf ms_.nba 0x20040305
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306
del *.nbf -y
xda2nbftool -sd PH10 -so TMOBILE -sl WWE -v NK.nba
xda2nbftool -sd PH10 -so TMOBILE -sl WWE -v ms_.nba
xda2nbftool -sd PH10 -so TMOBILE -sl WWE -v Radio_.nba
xda2nbftool -c -u -v NK.nba
xda2nbftool -c -u -v ms_.nba
xda2nbftool -c -u -v Radio_.nba
xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x ms_.nba ms_.nbf 0x20040305
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306
Now I have on my device the following information:
ROM 1.72.00WWE
ROM date: 03/15/04
Radio: 1.14.00
Protocol: 1337.24
ExtROM: 1.72.126
My recent troubles with the device are as following: I have no indication of GPRS traffic, no info about battery and brightness on my Today screen.
As it seems to me, there was kind of GPRS monitor program which made availiable all these features. So, my question is, what should I do to make it work like in 1.60 ver.
Also, when using GPRS I've got problems with disconnecting. Earlier, I just pressed the icon in the bar with connection info and there was a "Disconnect" button. So, now there's nothing about it. Even pressing "Hang over" button doesn't help to exit GPRS.
Please give me your informationg on solving these problems.
Thanks and best regards!!!

I think the mistake you made to forget to check the contents of the iMate rom.
There are T-Mobile based Himalaya roms availale which feature all the original T-mobile add-ons. One example is my 1.72.902 rom: http://forum.xda-developers.com/viewtopic.php?p=66090#66090
Before upgrading make sure to check the post of dcs on avoiding (future) country id errors when upgrading (since you have used an imate rom on a T-Mobile device you are likely to get into trouble when you did not follow dcs's instructions.

Dear edsub,
Tell me please, are there any ways to install the t-mobile specified software into my I-mate 1.72? I mean without treating the ROM? As I understood, these features are located in Extented ROM and probably could be installed just by updating ExtROM.

Does Anyone know vodafone Operator code for 9090

I am trying to run the batch file fix country code error I need the code for Vedafone..
For example for T-Mobil the code is T-MOB101

do a Radio ROM backup, open it in HEX editor and look for it there. it is somewhere near the top of the file.
if you cannot find it, let me know, i will tell you exact location.
or run "GetDeviceData.exe" on your 9090 and then take a look into \windows\devicedata.txt
buzz

Get data only shows me PH20B. Where do I find a Hex editor and how do I do a rom backup keep in mind that everything is in Italian and I have no clue how to read it.

copy the devicedata.txt over to your desktop pc and read it there.
Don't forget to turn line wrapping on.
buzz

That is what I was doing wrong. I was trying to open devicedata.txt on my on Qtek 9090. When I opened it on my PC I was able to see the operator code of Vodafone for Italy
here is the correct line that need to be changed in the install batch file
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -so DANGA405 -sl ITA ms_.nba
xda3nbftool -so DANGA405 -sl ITA nk.nba
xda3nbftool -so DANGA405 -sl ITA radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba
This will work with the Italian version being converted to English

Dopod 818 Chinese full Rom updates (not SD method) FIXED!!!

I'am uploaded extracted NBF files from SD images to FTP.
Now you can upgrade any device
ftp.xda-developers.com/Magician/Chinese/DOPOD 818 CHS Complete/
ftp.xda-developers.com/Magician/Chinese/DOPOD 818 CHT Complete/
I uploaded Extended Roms also.
ftp.xda-developers.com/Magician/Extended-roms/Dopod 818 CHS 1.03 Extended Rom/
ftp.xda-developers.com/Magician/Extended-roms/Dopod 818 CHT 1.03 Extended Rom/
There list of files in CHT and CHS Dopod 818 ROM
Dopod 818 CHS Extended ROM 1.03
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\Delete_vdisk_shortcut_CHS.sa.CAB
EXEC:\Extended_ROM\DopodContacts.exe
EXEC:\Extended_ROM\DopodTasks.exe
EXEC:\Extended_ROM\AutoLock.exe
CAB: \Extended_ROM\BackKeySound_RC10.CAB
CAB: \Extended_ROM\Customize_103158.sa.CAB
CAB: \Extended_ROM\battery_OU_081304.sa.CAB
CAB: \Extended_ROM\PowerWordCE_103139.arm.CAB
CAB: \Extended_ROM\airstrike_103107.CAB
CAB: \Extended_ROM\Gotone_103139.sa.CAB
CAB: \Extended_ROM\wmStock_backupSMS_103139.sa.CAB
CAB: \Extended_ROM\MMS20016_Magician_CHS_1123.CAB
CAB: \Extended_ROM\MMS_Setting_10292004.sa.CAB
CAB: \Extended_ROM\iaSolutionJava_2.0.0110.2234_20041126.sa.CAB
CAB: \Extended_ROM\Zip_CHS_RC10.CAB
CAB: \Extended_ROM\Camera_Ambience_Setting.sa.CAB
CAB: \Extended_ROM\CameraWizard_CHS_B19_to_RC13.CAB
CAB: \Extended_ROM\Patch_103_4.sa.CAB
CAB: \Extended_ROM\Patch_CHS_103150.sa.CAB
CAB: \Extended_ROM\patch_wavedev.CAB
CAB: \Extended_ROM\Version_CHS_103169.sa.CAB
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
Dopod 818 CHT Extended ROM 1.03
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\Delete_vdisk_shortcut_CHT.sa.CAB
CAB: \Extended_ROM\BackKeySound_RC10.CAB
CAB: \Extended_ROM\MMS_v2.0.0.16_CHT_20041115.CAB
CAB: \Extended_ROM\MMS_Setting_CHT_1029.CAB
CAB: \Extended_ROM\ClearVue_v2.4.386_CHT_1018.CAB
CAB: \Extended_ROM\Caller_ID_CHT_RC10.CAB
CAB: \Extended_ROM\Caller_ID_CHT_RC10_Reg.CAB
CAB: \Extended_ROM\Customize_103144.sa.CAB
CAB: \Extended_ROM\User_Angent_103144.sa.CAB
CAB: \Extended_ROM\Patch_103_3.CAB
CAB: \Extended_ROM\Patch_CHS_103139.sa.CAB
CAB: \Extended_ROM\CameraWizard_CHT_B19_to_RC12.CAB
CAB: \Extended_ROM\Version_CHT_103144.sa.CAB
CAB: \Extended_ROM\AutoConfig.sa.CAB
EXEC:\Extended_ROM\TPEnable.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset
Enjoy

Which files should I install to have the ability to read/write chinese on my phone ?

I do not know I just compile maupgrade version of this upgrade.

Re: Dopod 818 Chinese full Rom updates (not SD method)
are u the man with me qq?
i will just post it to hipda.

what what?

what ? :?

tupisdin said:
what what?
Click to expand...
Click to collapse
sorry,i just made a mistake.
and i want to ask how to change operator and country id at first!

to clarify for those that do not know, the chT is traditional chinese, and the chS is simplified chinese; and to some ppl's opinion, this is supposedly a more stable build than the o2 chinese one.
How are we supposed to flash it w/o putting it on a SD card?
As well, could someone please list out the contents of the extended rom and perhaps a short description of each?
and to answer the previous question, you have to get the file "getdevicedata" and run it on your machine first. than using explorer in windows browse to find a devicedata.txt (i think) file to find your operator and country information.
imo i still think it's easier to flash w/ sd card if you follow the steps properly, it worked for me

when i find the operator and country information, how to change it? and change to what?

by cht ican let it work.
but by chs i get always erro100: model id erro, even if i change the operator and language with .bat.

You must change operator and language id in bat file at first.

u mean this
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -so T-MOB101 -sl CHS ms_.nba
xda3nbftool -so T-MOB101 -sl CHS nk.nba
xda3nbftool -so T-MOB101 -sl CHS radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
i use tmobile mdacompact ,and in chs.
i got the DeviceData.txt like this
T-MOB101 CHS S
and i change the change.bat like above.
but no use.

what i downloaded has no change.bat in radio+nk+extrom_dopod818_CHS document.

xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
0x20040522,0x20040521,0x20040523 depends on what? the rom?
i mean for the other roms upgrade is that nummber same? example CHS rom upgrade use the different number with CHT?

Help
i just used you Upgrade,But it hangs on bootloader,what can i do?

when i power on now,it is bootloader,what should i do with it?

I tried with chs but don't work for me,there has country error.
and with cht without error but alway checking and in the screen of s100 USB 1.0 .... I must flash with the original one and work again

You must ange operator and language id at first.

I did but still don't work
change.bat
operator=DANGA203 country=FRE
---------------
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -so DANGA203 -sl FRE ms_.nba
xda3nbftool -so DANGA203 -sl FRE nk.nba
xda3nbftool -so DANGA203 -sl FRE radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba
I don't know where is the problem....

can you get getdevicedata from your device?