Database Users

Where to get a radio unit file in SD format ??

Hello
I have a serious problem with my XDA Qtek 1010 on the radio part.
In the bootloader i got " GSM ERROR" due to an error in flashing procedure.
I can back-up my ROM and bootloader and GSM part as well.
The problem is that I have found a lot of files to flash my ROM part bu nothing for the RADIO part.
Is there anyone so kind to help me and send a file ( or a link to download from ) from the radio part ( in SD format ) ?
Thanks,
Silviu C.

It would help if we knew what Radio stack you were running before the upgrade?

radio version before upgrade
I am not sure about initial radio version. It was an upgrade that is for sure.
please help me

Ok here you go, download the below file, use WinZip to extract the .cab from the .exe and copy it to your SD card.
Qtek 1010 Radio Stack Upgrade
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING
HTH

Ok here you go, download the below file, use WinZip to extract the .cab from the .exe and copy it to your SD card.
Qtek 1010 Radio Stack Upgrade
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING
HTH

Qman said:
Ok here you go, download the below file, use WinZip to extract the .cab from the .exe and copy it to your SD card.
Qtek 1010 Radio Stack Upgrade
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING
HTH
Click to expand...
Click to collapse
Thanks for your advice
Still not working
Hanging to 1%.
Please advice
Silviu C.

Ok locate and copy the below files to your devices windows folder and run RSUpgrade.exe to restart the upgrade. (note this is an old method but it might still work).
RSUpgrade.exe
RSUpgrade.cp64
monitor_ul_bs.map
monitor_ul_bs.m0
also take a look at the below thread:
http://forum.xda-developers.com/viewtopic.php?t=4123
HTH

I want one

Need help unlocking a HTC Wallaby (Rom 4.01.16)

Friends,
I need help unlocking a HTC Wallaby that I got from a friend. I would like to use the phone with Cingular and my friend is with TMobile.
I tried to run "XDA-developers-SER-v12" but get the following errors.
CMD Error:
ERROR : GetConnectionType
"An existing connection was forcibly closed by the remote host"
"error getting connectionType"
This is followed by Programme A launching off - but gets aborted after 2 steps:
ERROR 011: Execute Remote Communication Program Error
"Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected"
I am using a USB cradle and the ActiveSync is working perfect.
Here are the full device details:
HTC Wallaby PW10B1
Rom Ver 4.01.16 ENG
Rom Date 02/04/04
Radio Ver 6.25.02
Protocol ver 324e4
Any help graetly appreciated!!
Thanks,
freemee

Have you tried xdaunlock ? Copy this to your phone and execute it there.

Follow this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
HTH
Stefan

cruisin-thru said:
Have you tried xdaunlock ? Copy this to your phone and execute it there.
Click to expand...
Click to collapse
Thanks for your reply.
Yes, I did try XDAunlock.....it does'nt work.....actually according to the instructions that are posted.....its not supposed to work for the model I have....still trying does'nt harm :roll:
Will keep trying and keep posting.....
Thanks.

I think you need to flash rom with special edition using sd card method as long as your bootloader allows this. If not you may have to patch bootloader then try it.

LumpiStefan said:
Follow this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
HTH
Stefan
Click to expand...
Click to collapse
Hello Stefan,
Thanks for your message/tip.
I tried doing this based on the instructions given. Here are my queries and feedback:
QUESTION>
I tried to back-up the existing bootloader+CE on the SD card and the copy process in itself was successful -- but after this the screen instructions are not clear
a) how should I EXIT the back-up program??
b) at what point do I pull the SD card from the device (as soon as it says that back-up is complete??
c) how do I shut the device??
FEEDBACK + QUESTION>
I tried to put the bootloader (5.15) into the device by running the specified dos command. I get the following error.....
C:\XDA\xdatools>pnewbootloader bootloader_v5_15.nb0
'C:\XDA\xdatools\pput.exe' is not recognized as an internal or external command,
operable program or batch file.
ERROR: ITReadProcessMemory - Unspecified error
Unable to find flash info offset, cannot disable bootloader writeprotect
PLEASE HELP!!

cruisin-thru said:
Once the backup is complete you can remove the card and soft reset.
Backup the existing bootloader and operating system using card reader
Wipe the SD card (format FAT). Stick the SD card back into the pda and soft reset, then cradle it.
Go to a DOS prompt and CD to where you have extracted the XDATools
Type 'pnewbootloader bootloader_v5_15.nb0' to write the Wallaby 5.15 boot loader to the device.
The output looks like this:
D:\XDAtools\binaries>pnewbootloader_40116 bl515.nb0
Copying D:\XDAtools\binaries\itsutils.dll to WCE:\windows\itsutils.dll
in FindFlashInfoOffset
protection found at 8c0d60f8
result: 00000000 00000000
Click to expand...
Click to collapse
cruisin-thru >> Thanks for your msg.
A) When you say "Once the backup is complete you can remove the card and soft reset" does it mean that I can remove the SD card while the device is still in the "bootloader mode" and then soft reset to close the device??
B) The second part of your message is what I precisely tried and got the above reported error msg. Anything wrong that I was attempting?? OK one thing is I had formatted the SD card on the Wallaby itself not on any card reader.....could this be an issue??
Thanks!!!

You should format the card on the pc in a card reader and choose fat and not fat32. Yes you can remove the sd card while in bootloader.

cruisin-thru said:
You should format the card on the pc in a card reader and choose fat and not fat32. Yes you can remove the sd card while in bootloader.
Click to expand...
Click to collapse
Thanks -- will try this later today and report.....

freemee said:
FEEDBACK + QUESTION>
I tried to put the bootloader (5.15) into the device by running the specified dos command. I get the following error.....
C:\XDA\xdatools>pnewbootloader bootloader_v5_15.nb0
'C:\XDA\xdatools\pput.exe' is not recognized as an internal or external command,
Click to expand...
Click to collapse
Ok. Program pput has missed in the XDATools. Will update the package this evening....
You can additionaly download the itsutils from the ftp. There is the pput.exe (and some more utils) included....
HTH
Stefan

LumpiStefan said:
freemee said:
FEEDBACK + QUESTION>
I tried to put the bootloader (5.15) into the device by running the specified dos command. I get the following error.....
C:\XDA\xdatools>pnewbootloader bootloader_v5_15.nb0
'C:\XDA\xdatools\pput.exe' is not recognized as an internal or external command,
Click to expand...
Click to collapse
Ok. Program pput has missed in the XDATools. Will update the package this evening....
You can additionaly download the itsutils from the ftp. There is the pput.exe (and some more utils) included....
HTH
Stefan
Click to expand...
Click to collapse
Thanks Stefan >> I look fwd to the update. Could'nt find the link on the ftp (no url emebedded there).
PS >> If I am able to locate pput.exe elsewhere on this site - do I just put it in the folder where XDATools have been extracted??
Thanks again.

freemee said:
Thanks Stefan >> I look fwd to the update. Could'nt find the link on the ftp (no url emebedded there).
PS >> If I am able to locate pput.exe elsewhere on this site - do I just put it in the folder where XDATools have been extracted??
Thanks again.
Click to expand...
Click to collapse
Download either this: ftp://xda:[email protected]/Wallaby/Tools/XDATools.zip
or that:
ftp://xda:[email protected]/Wallaby/Tools/itsutils.zip
Both contain now the pput.exe
Just ensure, it´s in the same directory like pnewbootloader (or in the path) to be able to run it....
Stefan

LumpiStefan said:
freemee said:
Thanks Stefan >> I look fwd to the update. Could'nt find the link on the ftp (no url emebedded there).
PS >> If I am able to locate pput.exe elsewhere on this site - do I just put it in the folder where XDATools have been extracted??
Thanks again.
Click to expand...
Click to collapse
Download either this: ftp://xda:[email protected]/Wallaby/Tools/XDATools.zip
or that:
ftp://xda:[email protected]/Wallaby/Tools/itsutils.zip
Both contain now the pput.exe
Just ensure, it´s in the same directory like pnewbootloader (or in the path) to be able to run it....
Stefan
Click to expand...
Click to collapse
Thanks Stefan.....I will try again.....and report.....
Cheers.

LumpiStefan said:
Follow this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
HTH
Stefan
Click to expand...
Click to collapse
Hello Stefan > One more query please...... As per instructions I am supposed to take a back-up of existing bootloader and ROM.....
Question is why do I need to back these up (my existing bootloader is 5.22 and ROM is 4.01.16 ENG) ....... since these are readily available on this site??
Am I missing some point??

LumpiStefan said:
freemee said:
Thanks Stefan >> I look fwd to the update. Could'nt find the link on the ftp (no url emebedded there).
PS >> If I am able to locate pput.exe elsewhere on this site - do I just put it in the folder where XDATools have been extracted??
Thanks again.
Click to expand...
Click to collapse
Download either this: ftp://xda:[email protected]/Wallaby/Tools/XDATools.zip
or that:
ftp://xda:[email protected]/Wallaby/Tools/itsutils.zip
Both contain now the pput.exe
Just ensure, it´s in the same directory like pnewbootloader (or in the path) to be able to run it....
Stefan
Click to expand...
Click to collapse
Hello Stefan >> I tried again with the new download and made sure that all the specified criteria were met. Now I do not get the pput error -- but I still get the following error:
C:\XDA\xdatools>pnewbootloader bootloader_v5_15.nb0
Unable to find flash info offset, cannot disable bootloader writeprotect
(This time I did format the SD card in "FAT" format and put it in the XDA. Last time I had not done this step).
When I run the 'pnewbootloader' command it asks me if I want to downgrade from 5.17 to 5.15 bootloader -- so my question is -- will this utility will only work on 5.17 version?? I have version 5.22
Or is there any other way I can fix this problem??
As always thanks for your help.
freemee

Bootloader 5.22 should be also ok for the complete process....
Skip point 6 of the instructions.....
Stefan

LumpiStefan said:
Bootloader 5.22 should be also ok for the complete process....
Skip point 6 of the instructions.....
Stefan
Click to expand...
Click to collapse
I am trying to do this by flashing the device via SD card. I am running the OSImageTool to copy the "nk.nbf" file to the SD card.
Once that is done, I am trying to read the size of the copied file. Here are the two scenarios I have:
1. When I had formatted the card as FAT (from my SD reader) and then copied the nk.nbf file - it reports a size of 0 bytes
2. Next I formatted the SD card in the XDA and this time after copying the nk.nbf file - I am getting a file size as 512 bytes.
Question is that the actual filesize of nk.nbf is 31,745 bytes.
Am I on the right track??......what is the right way to do this.
Thanks.

Rom is written in special format to the sd card. Normally you're not able to read the file directly at the card. If you insert the sd card in your xda with running OS you should get an popup that asks you if you want to format the card. So it's not the normal FAT Format used for flashing....
Therefore it could be you're getting different results.
Stefan

LumpiStefan said:
Rom is written in special format to the sd card. Normally you're not able to read the file directly at the card. If you insert the sd card in your xda with running OS you should get an popup that asks you if you want to format the card. So it's not the normal FAT Format used for flashing....
Therefore it could be you're getting different results.
Stefan
Click to expand...
Click to collapse
Vielen Danke Stefan......you are right...I was able to read the filesize only in the properties.....not directly.
Which method shall I use 1 or 2 (as posted above). Maybe it does not matter...but since I am flashing the device....thought better to ask....
Thanks.

LumpiStefan said:
Rom is written in special format to the sd card. Normally you're not able to read the file directly at the card. If you insert the sd card in your xda with running OS you should get an popup that asks you if you want to format the card. So it's not the normal FAT Format used for flashing....
Therefore it could be you're getting different results.
Stefan
Click to expand...
Click to collapse
Stefan >> Successful unlocking!!!!
Thanks for your help and patience in answering a newbies questions.
Thanks also to crusin-thru and all others that have made life easier for the world at large.
Just a quick snapshot:
-- I skipped point 6 of the instructions (as per Stefan's advise)
-- For copying the nk.nbf file - I had formatted the SD card in the XDA itself (I am not sure whether this is relevant or not) - but just to record how I did it.
Now my device has the following config:
ROM > 3.17.03 ENG
Radio > 6.24.00
Protocol ver > 324e4
Thanks guys!

ROM upgrade headaches

Im trying to upgrade my jammin with the latest dopod rom ..Ive got hold of the romupdateutility.exe which bypasses the vendor id but now when i run the .exe it comes up with the error
'ERROR [240] File open'
As anyone got any ideas as to solve this problem?
Ive also tried the awizard tool but my jammin never seems to reset?
Any ideas would be great.
Thanks in advance

Ive managed to get the awizard tool to work and does reset the jammin but when i go then to install the dopod rom update in bootloader mode it comes up with ivalid provider id error ...... :? :? :? :?

Download and install WinRAR
Right click on the ROM you downloaded,
Extract the files to one folder.
In this folder, you will find 2 folders. You need to copy the files from both folders into one folder only.
Replace the RomUpdateUtility.exe as needed.
Double click on it and go.

27 said:
Download and install WinRAR
Right click on the ROM you downloaded,
Extract the files to one folder.
In this folder, you will find 2 folders. You need to copy the files from both folders into one folder only.
Replace the RomUpdateUtility.exe as needed.
Double click on it and go.
Click to expand...
Click to collapse
I try to update I-mate with the last Dopod ROM using this method and it doesn't work. I get invalid vender ID error.

OK.
You want this ROM
http://www.dopodasia.com/download/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
and this utility
http://forum.xda-developers.com/download.php?id=10811

27 said:
OK.
You want this ROM
http://www.dopodasia.com/download/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
and this utility
http://forum.xda-developers.com/download.php?id=10811
Click to expand...
Click to collapse
Oh, thank you... I was trying to use romupdateutility from I-mate pack. Now it works.

27 said:
Download and install WinRAR
Right click on the ROM you downloaded,
Extract the files to one folder.
In this folder, you will find 2 folders. You need to copy the files from both folders into one folder only.
Replace the RomUpdateUtility.exe as needed.
Double click on it and go.
Click to expand...
Click to collapse
Brilliant thanks alot thats where i was going wrong i wernt extracting both folders into the 1 ...Updating now
Thanks alot been pulling me hair out all day

You should expect the process to pause at 80% and 95%. Fear not, it will run its couse to 100%.
The new ROM is a lot faster. Try starting and stopping Blutooth. You'll notice the change in speed.

hmmm seem to have a problem where it stops at 46% and comes up with communication error 302 and wont go no further telling me to try a recovery :?

J273 said:
hmmm seem to have a problem where it stops at 46% and comes up with communication error 302 and wont go no further telling me to try a recovery :?
Click to expand...
Click to collapse
Hmm.
Are you using the ROM and Utility I told you to?

Im just downloading them agai nmate and ill post back.....ive just read the info that comes with it and error 302 is pretty serious i think and may need to send it to imate...hope not

so u know how you said extract all the files to 1 folder ....Ive got 2 folders when i unrar them :
1 called Output file with the NBF file in...... and the other is called RUU_Tools -> Prophet -> WWE ->and then after WWE i reach all the other files with romupdate utility all these files in here do these need to be in 1 folder along with the nbf file and does it matter what i call the folder i copy them all into?
If you get what i mean
So ill have all in 1 folder
Enterbootloader.exe
Readme.doc
Romupdateutility.exe
RUUgetinfo.exe
RUUResoource.dll
nk.NBF
Thanks
Jamie

J273 said:
so u know how you said extract all the files to 1 folder ....Ive got 2 folders when i unrar them :
1 called Output file with the NBF file in...... and the other is called RUU_Tools -> Prophet -> WWE ->and then after WWE i reach all the other files with romupdate utility all these files in here do these need to be in 1 folder along with the nbf file and does it matter what i call the folder i copy them all into?
If you get what i mean
So ill have all in 1 folder
Enterbootloader.exe
Readme.doc
Romupdateutility.exe
RUUgetinfo.exe
RUUResoource.dll
nk.NBF
Thanks
Jamie
Click to expand...
Click to collapse
Yes, you'll take them all and put in one folder.
You'll replace the utility from the ROM with the one in my link above.
It doesn't matter what the folder is called.

ok mate yea done that and its still doing the same hopefully ill figure it out

J273 said:
ok mate yea done that and its still doing the same hopefully ill figure it out
Click to expand...
Click to collapse
VNC?

Ive managed to flash back to the latest jammin rom....Ill have another go wit h the dopod rom
Whats VNC :?

J273 said:
Ive managed to flash back to the latest jammin rom....Ill have another go wit h the dopod rom
Whats VNC :?
Click to expand...
Click to collapse
Login to the forum and check your messages.

I have a JAMin with a DOPOD AKU2 image on it.
I want to put an imate ROM back on it.
I extracted the JAMin files into one folder, replaced ROMupdateutility.exe with the one in the link but it fails at 95% with this error:-
ERROR [326]: INVALID COMMAND
This NBF file cannot be used for your PDA Phone. Please check your NBF file.

yea im tryin to get back to imates rom and have exactly the same problem get to 95% then get the above error

Custom ROMS Possible?

Given that crossbow is now floating around out there I was wondering if its possible to cook your own ROM for the Herald? I would happily start researching cooking ROMS etc. if it is. Or are we faced with a situation similar to that of the hermes where we need to find a bootloader that allows the flashing of unsigned code?

Hi,
i think the Problem is that Herald is not so popular as the Wizard and Prophet by now....
Let´s ait and see when someone is getting this nice one unlocked !

you are in the same situation as the Hermes.
AFAIK all devices using NBH for rom upgrades, need the upgrade file to be signed, otherwise bootloader won't flash it.

pof said:
you are in the same situation as the Hermes.
AFAIK all devices using NBH for rom upgrades, need the upgrade file to be signed, otherwise bootloader won't flash it.
Click to expand...
Click to collapse
thanks for the answer (not the one i was looking for though!), i noticed in your hermes thread that you managed to get your hands on the bootloader from a pre production hermes. has this helped? should i be looking for the equivelent for the herald?

It helped because it has the commands to flash unsigned code... i don't know if preproduction bootloaders in Herald will have the same "feature", but it may be handy if you can get one too

I can try looking but i wouldnt know where to start! any advice would be appreciated.

Bootloader of Herald is similar to that of prophet and wizard.The only differrence now is the nbh format.One needs to check if awizard work or not?Then we canthink of debranding.I am working on the Bootloader of herald.Will post everything in Wiki.Pls wait for some time

hdubli said:
Bootloader of Herald is similar to that of prophet and wizard.The only differrence now is the nbh format.One needs to check if awizard work or not?Then we canthink of debranding.I am working on the Bootloader of herald.Will post everything in Wiki.Pls wait for some time
Click to expand...
Click to collapse
ok thanks. If you need any assistance please ask me.

Here you go..
s4vva said:
ok thanks. If you need any assistance please ask me.
Click to expand...
Click to collapse
Thanks to aWizard v 1.3 beta2 and POF for making NBH extract..
I was able to flash my herald from 1.7 dopod asia to new HTC 1.8 without changing/touching IPL/SPL.Here is how to do :
1)Use POF's NBH extract and extract the ROM parts.
2) Copy the OS.nb to awizard ROM folder and rename it to.nba
3) From the Lib folder of awizard, transfer enable rapi and certsps cabs to yr device and install them.
4)Now run the batch file and select "e" to enable rapi.
5) Then you can directly choose the option "w".This will give you the option to choose the ROM u want.Select and wait till awizard finishes.
One can also back up the Extended ROM, Splash image, bootloader, Radio and OS ROM with awizard.
It is very interesting that the size of the .nb file extracted from NBH file and the size of the wizard ROM(80040000.nb) is exactly same.
I tried to put crossbow image into it..but I clouldn't boot the herald.The boot screen showed "OS 10.1.00.88
So if some one can extract the things from both the .nbs we can think of having crossbow in herald..and I think POF can do it.
I hope, this helps the members to upgrade and play with their toys.

You Rock
Finally !!!! Did it. followed the instructions and wallaa finally dutch rom Bye bye bye and Hello English Rom.
Thanx Guys you rock
Look'n forward to crossbow soon.

Very nice discovery hdubli!!
Unfortunately I don't have Wizard nor Herald, and I have not much experience in ROM cooking... you should ask the real gurus here if you want to port the Wizard's xbow to Herald.... I saw it was ported to Prophet, but I don't know about the internals of Herald and Wizard enough to say if this can be also done here or not.
Anyway, kudos for your finding!
P.S. You should add this info to the wiki!

well done hdubli, this is serious progress!

I have no experience of ROM cooking, however I have both a Wizard and a Herald, so if I can help in any way just let me know.

Can I update the page pool? I want more free ram I now have 24 mb, nut I really want al least 32mb

Can you help out how to extract my rom, is there any tuttorial? I tried XDA tools but it apears an error.
best regards

1. NBHextract
2. mamaich imgfs tools to extract OS.nb, if it does not work try tadzio's make/prepare imgf with "-hermes" switch.

thanks a lot
i'll try to get the portuguese rom for xda
best regards
pof said:
1. NBHextract
2. mamaich imgfs tools to extract OS.nb, if it does not work try tadzio's make/prepare imgf with "-hermes" switch.
Click to expand...
Click to collapse

looking for a bit of guidence here
i have the herald 1.8 ROM as .nba (taken from device using awizard)
and i have the wizard OS I want to use as .nb (extracted using typho5)
now my understanding here is i need to extract the herald drivers from the herald OS and replace the wizard drivers in the wizard OS, rebuild the OS.nba and write it to the herald using awizard. Am i heading along the right lines or am i way off? any help would be appreciated.

i really don;t know but if you have a rom with more ram I would like to have it lol

hdubli said:
Thanks to aWizard v 1.3 beta2 and POF for making NBH extract..
I was able to flash my herald from 1.7 dopod asia to new HTC 1.8 without changing/touching IPL/SPL.Here is how to do :
1)Use POF's NBH extract and extract the ROM parts.
2) Copy the OS.nb to awizard ROM folder and rename it to.nba
3) From the Lib folder of awizard, transfer enable rapi and certsps cabs to yr device and install them.
4)Now run the batch file and select "e" to enable rapi.
5) Then you can directly choose the option "w".This will give you the option to choose the ROM u want.Select and wait till awizard finishes.
One can also back up the Extended ROM, Splash image, bootloader, Radio and OS ROM with awizard.
It is very interesting that the size of the .nb file extracted from NBH file and the size of the wizard ROM(80040000.nb) is exactly same.
I tried to put crossbow image into it..but I clouldn't boot the herald.The boot screen showed "OS 10.1.00.88
I do the same thing as you did, tried to put crossbow image into it, and it boot up and freeze at the start screen, so now I have the problem, how to put the old OS back?
I have back up the OS ROM, but my machine can only boot into the tri-color screen, how did you do on your machine, please tell, it will hellp me out.
Thanks
Click to expand...
Click to collapse

Repack cooked ROM to NBH file

Hi!
If I cook my own ROM using the core pro kitchen for Artemis, what is the necessary steps I have to do to repack the rom into i nbh file and be able to flash it with the RUU utilities? I guess this is be possible now that we have the USPL, thanks to Pof and all the other geniuses in this forum.
Regards,
PK

All existing tools for making NBH work fine with hermes / trinity, but not with artemis as signature positions differ. To create artemis NBH you have to use this method, until a better tool to automate this is done.
1) Use nbhgen.exe to create NBH (edit sample.txt)
2) nbh2dbh.pl RUU_signed.nbh file_unsigned.dbh
3) imaghash.exe -raw file_unsigned.dbh file_signed.nbh 1024

I'm making a tool for this at the moment, it is almost finished, but I can't test the generated .nbh's because T-mobile still has my Artemis in repair!!!

today Mr.Dark simpson release HTC rom tool Repack *.nb ---> Nbh
work in HTC Artemis and ....
Link here :
http://forum.xda-developers.com/showthread.php?t=311909
Cheers..!

tom_codon said:
today Mr.Dark simpson release HTC rom tool Repack *.nb ---> Nbh
work in HTC Artemis and ....
Link here :
http://forum.xda-developers.com/showthread.php?t=311909
Cheers..!
Click to expand...
Click to collapse
Tom,
I tried Dark Simpson's utility with your OS.nb but failed. Could you please tell how to do? Thanks.

Khuanchai said:
Tom,
I tried Dark Simpson's utility with your OS.nb but failed. Could you please tell how to do? Thanks.
Click to expand...
Click to collapse
Khuanchai my friend..!
Copy it in Disk C
And try agian.
This worked verry good.

tom_codon said:
Khuanchai my friend..!
Copy it in Disk C
And try agian.
This worked verry good.
Click to expand...
Click to collapse
Thanks, Tom. The new version 1.01 now works beautifully.

pof said:
All existing tools for making NBH work fine with hermes / trinity, but not with artemis as signature positions differ. To create artemis NBH you have to use this method, until a better tool to automate this is done.
1) Use nbhgen.exe to create NBH (edit sample.txt)
2) nbh2dbh.pl RUU_signed.nbh file_unsigned.dbh
3) imaghash.exe -raw file_unsigned.dbh file_signed.nbh 1024
Click to expand...
Click to collapse
Where can I get imaghash.exe please?

Hi!
Thanks a lot for these great advice. I relay start thinking of cooking my own ROM, it seems like all the tool is quite mature now, both the core pro kitchen and the Mr. Dark Simpson's authoring tool.
One thing I could need some more advice about though, is how to make an OEM package, or where do download already created packages.
Regards,
PK

paalkr said:
Hi!
Thanks a lot for these great advice. I relay start thinking of cooking my own ROM, it seems like all the tool is quite mature now, both the core pro kitchen and the Mr. Dark Simpson's authoring tool.
One thing I could need some more advice about though, is how to make an OEM package, or where do download already created packages.
Regards,
PK
Click to expand...
Click to collapse
If you want do some OEM package...!
May be OEM Storage 1.75.
Extract All File in Storage 1.75 cab
Copy to Folder Storage 1.75
All reg in Storage 1.75 cab copy to Notepad and see link :
http://www.famkruithof.net/uuid/uuidgen
That it ID.Maybe : 6b44e778-1c4d-11dc-8314-0800200c9a66
Save all reg Storage 1.75 name 6b44e778-1c4d-11dc-8314-0800200c9a66.rgu ( Save to Unicode Format)
And Create file empty 6b44e778-1c4d-11dc-8314-0800200c9a66.dsm in Folder Storage 1.75
Now you have OEM Storage 1.75
Cheers..!

Quick question
Is there a way to replicate 1 xda orbit onto another? The reason I am asking this is because I have killed my xda orbit to the point where it hangs on the "O2 Welcome Screen". It does however boot up into bootloader mode and I can connect to it using mtty.exe. My mate has an xda orbit which was bought at the same time as mine... is there anyway to mirror that device onto mine so that it starts working again?