Related
Hi,
Need advise which one to keep and which one to delete on StartUp folder.
- Airscanner Firewall 2/3/05 55B
- Assistant 10/1/04 45B
- CheckAutoRun 10/1/04 30B
- IA_CID_Start... 9/3/03 32B
- O2 Connect 10/1/04 28B
- O2 plus for Xda 2/1/05 24B
- poutlook 10/1/04 14B
- RegNotify 3/30/04 4.00K
- STK 1/10/04 21B
- SanDisk Wi-Fi 2/1/05 26B
So far I remove STK (since when I tap on it say something like running program from SIM Card). And no bad effect (cross finger).
Best regards,
Arto
WOW, this new development using Flash Lite 2.1 and TouchCube version`(Alpha - DEMO ) is very impressive- smooth, fast and working with DPAD, and most important REAL Touch on Hermes. Can't wait for the Final version. Enjoy it
Here's the link for the alpha v2 http://forum.ppcgeeks.com/showthread.php?t=6938&page=9
and for flash Lite 2.1
http://adobe-flash-lite.en.softonic.com/pocket
and for the Cube config file http://forum.ppcgeeks.com/showthread.php?t=6938&page=8
Edit:I will remove the attached files if the Original Authors do not want me to post them here. Original post only linked to the PPCgeeks site forum.
13/09/07 - Add new zip file for SMS V2_W_SMS.zip - MUST install the original files first, then unzip, overwrite contents with SMS files. Note: when tap on the SMS button- use the left side of button ( tap on center button will exit to clock screen ).
04/10/2007 - Update new Cube Launcher v2_real.zip - 12 contacts, remove demo, improved features. etc... as per Byka post http://forum.xda-developers.com/showthread.php?p=1557000#post1557000 Post #104. Enjoy it
In this attachtment the cube :
-rotating realtime (when you pull your finger)
-invoke the cube: drag the finger bottom to up (on the mainscreen, is you not keeping that)
-remove the cube: drag your finger up to bottom.
-This version comprise the 12 contacts , real and refresh datas look the signal and battery icons (colored yet, this relevant me beetwen test).
-this version not comprise the sms imput panel, but I removed the "sample message" text.
-lack now vibrate icon.
-removed the Demo texts.
Next release: Button on the mainscreen for you fauvorite ScreenLock program.
The SMS write panel finished, but I testing yet, I liking preference the t9 looked panel here big buttons. (abc2...def3...)
10/10/2007 - Add new version cube_real_edited.zip as per Byka Post #117. Unzip, copy over existing installation and Enjoy .
24/10/2007 - Add new version from Byka post #143
Cube v_2.1 + selectable MainScreen_w_Digital clock +Config12_background + efrost MINIMIZE.exe + notyfi.mscr for Mortscript.
WARNING! The all files default folder on your PPC in the Main Memory:
../Program Files/Szabi/CubeLauncher
In the new Page1.txt config file add some variables:
&Timeformat=24& //digital clock hourformat
&Vibra=off& //not avaible
&MainScreen=off& //If you like keep to the MainScreen ==>
&Minimize=on& //apply the MINIMIZE command only, not will be exit the cube, when that invisible
&Name1=Contacts &Command1=".. //etc... etc...
If you like apply the MainScreen the missedCalls and the missed SMS indicators (or FGA's super mainscreen) you need prev. installed (and one running) MortScript.
If you like apply EFROST's super FTouchFLO applycation starting the my cubefrom default TODAY screen, you need the FTouchFlo folders write any settings in the settings file:
...
DownUpApp:/Program Files/Adobe/FlashLite/saplaywm.exe
DownUpAppCmdLine:"/Program Files/Szabi/CubeLauncher/Cube2.swf"
...
Speed and easy. I hope this help for you.
BR!
ByKa
Looks very good!
well its alll we got nice 1
gonna try looks ok,
jdac21
just installed it...and it works great!!!!
does it works with wm6?
dahool said:
does it works with wm6?
Click to expand...
Click to collapse
Yep, I've installed in my Hermes with WM6 and it's working with all features- including Sliding with your finger (REAL TOUCH).
pl55 said:
Yep, I've installed in my Hermes with WM6 and it's working with all features- including Sliding with your finger (REAL TOUCH).
Click to expand...
Click to collapse
i confirm works great ,
jdac21
Could some one send-me flash Lite 2.1 please.. in that link it says: "Site Area Temporarily Unavailable"
[email protected]
PlZ!! ^^
dahool said:
Could some one send-me flash Lite 2.1 please.. in that link it says: "Site Area Temporarily Unavailable"
[email protected]
PlZ!! ^^
Click to expand...
Click to collapse
check your email
and enjoy the file attached
Thank you a lot!!! lets test it xD
dahool said:
Thank you a lot!!! lets test it xD
Click to expand...
Click to collapse
"DE NADA"
EDWARD
too nice!!!
I'll wait for the full version!!
anyone knows when it comes out?
how do i install this
i cant figure wich ones i need to install
mr_nonshalant said:
i cant figure wich ones i need to install
Click to expand...
Click to collapse
OK , Here's what I did:
1. Install Flas Lite 2.1 for PPC WM5 Cab into Main memory.
2. Install Szabi cab launcher cab to main memory
3. Copy Cube config directory to same directory as cube launcher
4. run cube config exe to config cub screen - Hint: save change after fill each screen ( there's a bug in the config that did not save properly)
5. Launch the cube and enjoy.
thanks for posting! This is a very cool high tech addition to the Hermes!
My screen is blank. Just the clock and beautiful girl. But no icons. I didn't really get into configuring it yet but I thought it would just open and run. anyone know where I am tripping up?
afguard17 said:
My screen is blank. Just the clock and beautiful girl. But no icons. I didn't really get into configuring it yet but I thought it would just open and run. anyone know where I am tripping up?
Click to expand...
Click to collapse
I have since uninstalled this, but I believe you first touch near the top of the screen, near the clock. The clock will disappear. Once the clock disappears, swipe from the very bottom of the screen to the top. That should bring up the cube.
pl55 said:
OK , Here's what I did:
1. Install Flas Lite 2.1 for PPC WM5 Cab into Main memory.
2. Install Szabi cab launcher cab to main memory
3. Copy Cube config directory to Storage card ( to save memory)
4. run cube config exe to config cub screen - Hint: save change after fill each screen ( there's a bug in the config that did not save properly)
5. Launch the cube and enjoy.
Click to expand...
Click to collapse
thanks for the instructions on using the new additions!
Here're some of the icons you can use, and a new background jpeg file ( if you don't like existing one ). Have fun
Anyone have a link to the config file? I got the other two main files from here...
http://forum.xda-developers.com/showthread.php?t=328010
However, they don't seem to have the config file, and I don't have a pocketpc geeks account to download the config.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
###########################################################################################################
Before posting question read FAQ
###########################################################################################################
Official HP ROM
WM 6.0 18125.0.4.2 ENG
WM 6.5.x ROMs with bottom menu (new style) (BETA ROMs - be ready to find bugs and maybe not all your software will work correctly)
WM 6.5.3 29017 Manila Edition v0.5 UC (Langs for EzInput)
WM 6.5.3 23128 Manila Edition v0.4a UC (Details) (Langs for EzInput)
WM 6.5.3 23128 Manila Edition v0.4 UC (Details) (Langs for EzInput)
WM 6.5.3 23529 Manila Edition v0.3 UC (ReadMe) (FIX 1)
WM 6.5.3 28011 Manila Edition v0.2 UC
WM 6.5.1 23088 Manila Edition v0.1 UC
WM 6.5 ROMs with upper menu (old style)
WM 6.5 21867 Manila Edition v0.2 UC (Official WM 6.5 taken from HTC MEGA)
WM 6.1 ROMs
WM 6.1 21054 v0.9a Manila Edition UC (FIX 1) (The best ROM ever)
WM 6.1 21056 LITE UC
sandrew - $
gkleding - $
Margasc - $
emandell - $
R.C. - $
koetoe - $
lozefini - $
Federer73 - $
thebranded - $
Kato007 - $
rust123bg - $
Click to expand...
Click to collapse
ROM Info:
- 23128 XIP/SYS (AKU5308 Windows CE: 5.2 Build 4159 (1 July 2010 15:29:00) )
- LZX Compression
- PagePool 16Mb
Changelog v0.4a:
- [FIXED] SMS
- [FIXED] GPRS Tweak (missing dll)
________________________________________________________________
Changelog v0.4:
- [UPDATED] XDA_UC v2.0
- [UPDATED] GoogleMaps v4.1
- [UPDATED] Manila2D v2.0.2013
- [UPDATED] GPRS Tweak v0.6
- [UPDATED] SetVolume 0.8.0
- [FIXED] While in Camera HTCAlbum menu was empty
- [FIXED] Launcher wrong shortcut
- [FIXED] Lockscreen empty calendar item
- [NEW] Resco TaskManager (mapped to OK button)
- [NEW] SenseTasks
- [CHANGED] EzInput Menu
- [REMOVED] HTCPhoneCanvas
- [DISABLED] HTCMenu
XDA_UC folder content (All soft here you can easily remove if dont like or add your own)
AdobePDF v2.5.1.395886.cab
Compact qwerty by Default.reg (Remove if you want FULL QWERTY by Default)
G-Alarm 2.6.cab
GoogleMaps v4.1.cab
Opera v9.5 Build 17753.cab
Changelog Beta 0.2:
- Added Calendar and Date pickers
- Added HTC Random Access (See Contacts)
- Updated HTCAlbum 3.0
- Performance optimization
- HTC Keyboard enabled
- Changed all icons
Fixed
- Youtube
- LockScreen
Contents of XDA_UC folder
Opera v9.5 Build 2392.cab
G-Alarm 1.5.1.cab
cleanRAM 1.8.3.cab
AdobePDF.cab
Voice Speed Dialer.cab
CleanRAM Settings.reg
-----------------------------------------------------------------------
-----------------------------------------------------------------------
-----------------------------------------------------------------------
ROM Info:
- Windows Mobile 6.1 Professional
- OS 5.2.21054 (build 21054 1.6.7)
- PagePool 16Mb
Preinstalled Softwares :
"AdobePDF"="2.5.1.0.378273"
"AdvancedNetwork"="1.0.12.0"
"Audio Manager"="2.2.1917.1227"
"Album"="2.5.1822.1129"
"AudioManager"="2.2.1822.3925"
"BluetoothSetting"="2.11.1.2"
"BootLauncher"="1.0.37394.1"
"BTFTP"="1.2.33309.91"
"CMBandSwitching"="2.0.0.3"
"CMBluetooth"="0.9.0.0"
"CMInternetSharing"="1.1.1.0"
"CMPhone"="1.3.0.1"
"CMCallBarring"="1.1.0.0"
"CMCallerID"="1.2.0.0"
"CMCallWaiting"="1.0.0.1"
"CMPin"="1.3.1.0"
"CommManager"="2.9.13.0"
"ConnectionSetup"="3.0.1916.3629"
"CyberonVoiceSpeedDial"="1.2.b090504"
"DShow"="2.0.1916.3629"
"EnlargeStartMenu"="1.2.34828.1"
"FullScreenPlayer"="1.05.080828"
"HTCSettings"="1.4.3.0"
"HTC Calculator"="1.1.1918.2229"
"HTCFramework"="1.1.1916.4030"
"HTCKeyboard"="1.5.32645.0"
"Manila"="1.20.1913.1530"
"Messaging Client Arcsoft"="5.0.31.81"
"mHubVO"="1.7.090609"
"Notification Enhancement"="3.0.1917.1225"
"Phone Canvas Enhancement 2G"="3.0.1917.1620"
"PhoneSetting"="1.47.0.0"
"PictureEnhancement"="1.50.1912.1428"
"RingtonePlugin"="1.00.080624.4"
"Settings Improvement"="1.0.1917.1630"
"Shared_Modules"="1.01.1914.3331"
"SMSInboxThreading"="1.35.0.1"
"TaskManager"="2.1.34837.4"
"USB To PC Pop Up"="2.3.1917.1625"
"Voice Recorder"="1.10.1917.1725"
"WLANSettings"="2.6.5.0"
"YouTube"="2.6.1917.1628"
BacklightController 0.9.5.2
EasyContact 1.1
G-Alarm 1.5.1
GoogleMaps 3.2.1
GPS Quick Position
M2DC 0.29.235
MobilePad 2.5
ObexInbox 0.948
Opera Backup 0.12
PIM Backup 2.8
PocketRAR 3.90
SetVolume 0.5.1
SIPChange
SyncroTime 0.94
WM5torage 1.9
XDA UC 1.0.0.5
Changelog 0.9a UC
- FingerMenu <-> HTC Menu Enchancement
- Updated XDA_UC v1.0.0.5
Fixed
- XT9
- Redirect in Camera to HTCAlbum
---------------------------------------------------------------------
---------------------------------------------------------------------
---------------------------------------------------------------------
I updated WM 6.1 LITE ROM. Now it is as clean as possible.
Changelog:
- XIP/SYS 21056
- XDA_UC support
Preinstalled software:
- OBEX Inpox
- PIM Backup
- SetVolume
- WM5torage
Removed HP Stuff:
- ClearVuePDF
- Java
- GoogleMaps & GoogleSearch
- LockStream languages
- HPEnroller
- HPShortcuts
- VoiceCommander
- HPVoiceReply
- HPZip
- MMS Trash (Audio, video, picture templates)
- TTY & AOC & CB
- et9 languages (polish, italian, spanish, russian)
- HP Theme
Some modifications:
I changed Voice button functionality due to removed VoiceCommander
- one tap -> Volume (SetVolume application)
- long tap -> TaskManager
PS Feedback and bug report are welcome
----------------------------------------------------------------
----------------------------------------------------------------
----------------------------------------------------------------
########################################################################################################
Flash instruction:- Put Flash.dio and XDA_UC folder on SD card (SD should be <=2G)
- Hold mute + record together and finally press power and release all 3 together
- SDloader appear and will clean boot when done
- During clean boot, you will need to wait for 2 beeps sound before you see the welcome screen,the phone will be unresponsive at that point
Step-by-step guide on flashing the HP iPaq 600
########################################################################################################
Q: Manila right softkey is named "programs", but by pressing on it launches camera
It is a known bug related to M2DC (M2D Config). Exactly after flashing all should be correct, but if you open M2DC, change something in it and accidentally press to softkey tab and then press ok (without modifing softkeys) M2DC automatically redefine softkeys to their default values Phone and Camera. So this bug is related to M2DC. Because i am not a developer of this program, i cant fix this.
Solution:
by default softkeys are set to
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Home]
"SK1"="Contacts"
"SK1Cmd"="\\Windows\\Start Menu\\Programs\\Office\\Contacts.lnk"
"SK2"="Programs"
"SK2Cmd"="\\Windows\\folderview.exe"
Q: I have a delay (2-5 sec) after I answer my phone
It is problem of all winmobile devices.
Solution:
Use default winmobile dialer
Install this cab or
Change key to zero
Code:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
"Enabled"=dword:00000001
Q: When i create New Folder in WM6.5 StartMenu icon is ugly.
You can change folder picture. See code below, it is made for my two folders: Multimedia and Office. Copy attached folder icon to Windows dir and edit registry by analogy with code below.
Code:
[HKEY_LOCAL_MACHINE\SECURITY\Shell\StartInfo\Start\Multimedia]
"Icon"="\\Windows\\Start_Icon_Multimedia.png"
[HKEY_LOCAL_MACHINE\SECURITY\Shell\StartInfo\Start\Office]
"Icon"="\\Windows\\Start_Icon_Office.png"
Q: When my pda battery left about 35%, the pda starts to scream "Low Battery Voltage detected" and then after 10 seconds the pda will turn off.
It is related to bad calibration of your battery or your battery is bad (old)
Solution:
Buy a new battery.
Before you buy new battery, try this solution
Discharge your battery to 0% with video. Then without turning it on charge to 100%. Should happen recalibration of battery, if it is not so old.
If dont work this, so buy a new one.
Q: How can i see default windows keyboard, Block Recognizer and Letter Recognizer
They are hidden by default
To make them visible use small utility SIP Manager
Q: Weather on Home page dont work
It uses your GPS location. Updates only with WiFi. Of course, GPS signal dont work in houses, be closer to window or the best result be out of house.
One more solution with Mortscript
Q: My town is not in the weather list. Can i add more cities to manila weather?
Manila2D WeatherCities Editor v.1.2.1
Q: I dont see Missed Calls on Home tab
With new Manila v2.0 it is impossible to show them on home tab, even with M2DC.
Q: I'd like to use outlook as default calendar and default Task application.
Copy two files to Windows dir. From Home page will be access to default calendar. Find shortcut of tasks.lnk and copy it to StartMenu. You will have access to default tasks.
Q: ActiveSync is always running
Create Fake ActiveSync sever
Q: How can i watch streaming live TV?
Install Streaming Media
Q: D-PAD: How to use it?
It works like this: hold down the end call button for 1 second, and the red LED will light up to let you know it's working. When it's on, the number pad keys have the following functions:
1：Home 2: Up 3: Page up
4: Left 5: Enter 6: Right
7: End 8: Down 9: Page Down
0: Tab
To switch back, just hold down the end call key again.
Also, you can change the backlight by holding down the Windows key and a number:
win + 7: 1st level of screen brightness, with the keyboard backlight off. Good for using indoors in average lighting.
win + 8: 2nd level of screen brightness, also with keyboard backlight off. Good for bright rooms and outdoors.
win + 9: Brightest level (use when in direct sunlight)
win + 0: Lowest brightness level, keyboard backlight on. Good for dark rooms and nighttime.
Q: HTC Keyboard Customization (Not for builds with EzInput 2.1)
Language packs and XT9
[ABC as Default] - Set ABC as default IME for hardware and software keyboards.
[T9 as Default] - Set T9 as default IME for hardware and software keyboards
NB!
Not all languages work correctly, some languages dont have hardware support (only numbers from hardware keyboard)
To view language you should manually add your language code to the registry.
Code:
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
"AvailableLanguages"="0109[COLOR="Red"],0119,01OC[/COLOR]"
Choose language by pressing "*" sign on keyboard (Not from Personal -> Input Menu)
User Customization FAQ
1) Why XDA_UC folder is needed?
What the XDA UC service does, is silently install (or not so silently if needed by User), .cab, .xdas, .xml, .reg, .mscr. This happens either at first or second boot
2) How can i create automatically Email account?
Here
3) How can i create automatically Exchange server
Here
4) How can i set automatically TimeZone and Weather
Here
5) Additional options
Useful INFO
How to dump Ipaq 614c
Ipaq 614c French ROM
hey i just do quick try on your rom.
-odd to me when the customization engine finish and i press reset, the screen go blank (not off just black) and seem to hang there, i punch the pinhole reset and seem works fine
-your pagepool seem to be 4mb(based on pagepool_by_wlodixon)
-and the dpad program doesn't seem to work
-you use the 80mb flash.dio (based on original flash.dio?) instead of the 76.9mb that other rom cooker use so you have a lot of unnecessary empty space at the end of file but I guess you will optimize later
Thank for your feedback, it is my first rom
-your pagepool seem to be 4mb(based on pagepool_by_wlodixon)
Click to expand...
Click to collapse
OK I will increase pagepool size
-and the dpad program doesn't seem to work
Click to expand...
Click to collapse
D-pad is not in startup, press to icon and then red button. Working fine
-you use the 80mb flash.dio (based on original flash.dio?) instead of the 76.9mb that other rom cooker use so you have a lot of unnecessary empty space at the end of file but I guess you will optimize later
Click to expand...
Click to collapse
I use kitchen by captaintrip, it always generates the same size of flash.dio file (80 mb). If you use something different or know how to decrese size of ROM, share your knowledge
you can change the TEMPLATE.ROM in ROM folder to a smaller one, I used pdalcan rom as template which is smaller, make sure you replace the xip with yours though. But I guess it probably doesn't matter much other than the flash file is smaller
new version beta 0.2 uploaded, view first post for link and changelog
sergiorus said:
new version beta 0.2 uploaded, view first post for link and changelog
Click to expand...
Click to collapse
And what about manila version?
I downloaded version with manila and I can't load this ROM. "Update Error! Pls Check!"
Uploaded Beta version 0.2 of Manila edition and download mirrors added
I downloaded version with manila and I can't load this ROM. "Update Error! Pls Check!"
Click to expand...
Click to collapse
Charge you battery to 100% and try again.
andiha said:
And what about manila version?
I downloaded version with manila and I can't load this ROM. "Update Error! Pls Check!"
Click to expand...
Click to collapse
Had same sh*t , used laptop Card reader , failed , used external USB port card reader - worked (took me serveral hourse to figure wtf) i thougt i messed up my phone
So if you're writing a file to a SD or whatever and pulling it straight out this mite be the case (windows didint finish writing to the card thus the "delayed write" failed)
Thaqnks for the Rom will try this on my 614c some time later on
Thanks for this sharing. I thought it was my problem, checked 5 times and it always flashed OK. So not my ROM Problem. Check guys your card readers.
WM 6.1 21042 advice
I tried to install WM 6.1 21042 BETA 0.2 and it works fine.
BUT I have small advice - start menu font and context menu font size is too large.
Can you change size of it?
Just for example; ROM WM6.1 OS 5.2.20270 rev 1.2 FIX with iolite manila v22 (link is in sergiorus signature) has nice font size and exactly what I need and I am sure other guys will be satisfied
ber00 said:
I tried to install WM 6.1 21042 BETA 0.2 and it works fine.
BUT I have small advice - start menu font and context menu font size is too large.
Can you change size of it?
Just for example; ROM WM6.1 OS 5.2.20270 rev 1.2 FIX with iolite manila v22 (link is in sergiorus signature) has nice font size and exactly what I need and I am sure other guys will be satisfied
Click to expand...
Click to collapse
It is HTC Enlarge Start Menu program, in next update i will add a small control panel applet to enable/disable this feature.
Mirrors please rapidshare or megaupload will also do...
Manila Edition beta 0.3 uploaded. Check second post for changelog. Later will add standard version.
Now ROM is a little bit optimized and runs faster.
Report any bug, will fix as soon as possible
Please upload on Rapidshare
Rapidshare link
TranminhMan releasing new rom with 3G Dialer:
http://www.pdaviet.net/showthread.php?t=51728
Thông tin bản ROM - ROM Informations:
- CE OS 5.2.21202 Build 21202.5.0.0 PV T2M.
- 3D Polaris Drivers
- .NET Compact Framework 3.5.7283.0
- AdobeFlash
- Advanced Configuration Tool v3.3.0.0 by Julien Schapman
- Base Hue Express
- dotFred Task Manager
- lpaso TitaniumCustomizer
- HTC Album
- HTC Booster
- HTC Camera 5.0.4
- HTC Comm Manager
- HTC Random Access
- HTC Sim Manager v6.60
- HTC TaskManager
- HTC TouchDual Dialer DIAMOND (support 3G)
- PCM Keyboard (support VN KKK)
- PIM Backup v2.8.0.0 by FdcSoft
- PocketNotepad v4.0.10
- Pocket RAR v3.80 by Alexander Roshal
- PocketScreen v1.3 by JJM. Roseboom
- Synchro Time v0.95 by Dennis Grachov
- TCPMP v0.72RC1
- Total Commander CE v2.51 by Christian Ghisler
- Windows Live v10.6.0034.0800
- psShutXP (mod)
- Windows Media Player 10.3 Build 21202 (mod)
- Bootscreen (mod)
The suggestion Radio is 1.59.X.X!!!
Download link:
Link 4share:
http://www.4shared.com/file/97437037/7fbd61cf/HTC_POLARIS_-_PDAVIET_ROM_WM65__Core_21202__by_TranMinhMan.html
Password to extract: TranMinhMan
download link is now available
And where is it please??
kostas244 said:
And where is it please??
Click to expand...
Click to collapse
prad66 will update his thread soon
kostas244 said:
And where is it please??
Click to expand...
Click to collapse
there:
http://www.pdaviet.net/showthread.php?t=51728
;-))))
or
http://www.4shared.com/file/9743703...IET_ROM_WM65__Core_21202__by_TranMinhMan.html
pswd as always
@ enterowiec
Thank you very much!!!
enterowiec said:
there:
http://www.pdaviet.net/showthread.php?t=51728
;-))))
or
http://www.4shared.com/file/9743703...IET_ROM_WM65__Core_21202__by_TranMinhMan.html
pswd as always
Click to expand...
Click to collapse
what is the user and the pass to enter the site?
http://www.pdaviet.net/showthread.php?t=51728
Anyone tested??
Re: what is the user and the pass to enter the site?
For
http://www.pdaviet.net/showthread.php?t=51728
There is a switch to English (US) bottom left.
Then you can choose register on the right near the top to create your own user.
http://www.4shared.com/file/97437037...anMinhMan.html
is a direct link to download the ROM
WARNING - swiping to the edge of the screen
Very pretty ROM.
Have been using it for 20 minutes now.
Couple of things I have to say.
1) Whenever I swipe on the screen, and my finger gets to the edge of the screen I have been getting the following error, followed by no touch control on the screen, until I restart.
Biotouch.exe The file 'Biotouch' cannot be opened.
(something about not being signed)
2) Some of the apps don't seem to work at all.
I couldn't get IE to work, or MSN weather beyond the first page.
3) When I was in the settings page, every time I made a change to a setting I was returned to the home screen, rather annoying when you're first setting it up.
All in all, I will have another go, on a later version when TranMinhMan has fixed the biotouch problem.
For now I'm going back to the 3Lit3 VI ROM.
I'll be posting the same comments on the PDAVIET site too.
Hope you find this helpful.
Cheers!
I have a POLA200, and I'm using Radio 1.65.30.09
Dan_q8 said:
Very pretty ROM.
Have been using it for 20 minutes now.
Couple of things I have to say.
1) Whenever I swipe on the screen, and my finger gets to the edge of the screen I have been getting the following error, followed by no touch control on the screen, until I restart.
Biotouch.exe The file 'Biotouch' cannot be opened.
(something about not being signed)
2) Some of the apps don't seem to work at all.
I couldn't get IE to work, or MSN weather beyond the first page.
3) When I was in the settings page, every time I made a change to a setting I was returned to the home screen, rather annoying when you're first setting it up.
All in all, I will have another go, on a later version when TranMinhMan has fixed the biotouch problem.
For now I'm going back to the 3Lit3 VI ROM.
I'll be posting the same comments on the PDAVIET site too.
Hope you find this helpful.
Cheers!
I have a POLA200, and I'm using Radio 1.65.30.09
Click to expand...
Click to collapse
1) disable touch flo with Advanced Config Tool and problem is solved.
2) IE do not work, but i think because there is'nt the file .exe but only the .lnk. If anyone have the exe we can try
3) For this question all the WM 6.5 have this annoyng "returned to the home screen" after change;
The ROM work well with Radio 1.59.44.02, it is fast.
Great job Mr. TranMinhMan, thank you
How ever, fantastic rom,fast and stable only Opera dosn't works
Stuck at zero
Hi.
I'm sorry but this update does not work for me. When I try to install this it goes through to the install, the phone restarts but it is stuck at 0% and will not complete.
Any ideas?
Do you have Hard SPL installed?
This rom works far more better then what I've expected. I tried several 6.5 WM versions but this one is the best. I use this rom in combination with radio version 1.59.44.02. Everthing works fine and even better after some tweaks like disable cube/touchflo, tuning the performance etc.
Wheather with msn works good this time. Only IE doesn't work yet (fix will come soon I hope). Everthing else works.
Disabeling the touchflow is a great tip. How about tuning the performance? Can you tell us what you did? Thnks.
There is encryption for SD Card enabled... Disable it works only via registry...
Petulinek said:
There is encryption for SD Card enabled... Disable it works only via registry...
Click to expand...
Click to collapse
Hi
Can you let me know the key to edit
I though it was [HKEY_LOCAL_MACHINE\System\StorageManager\Filters\E NCFilt] 'EncryptByDefault'=dword:0, but can't seem to find it on my polaris
Cheers
If you don´t have this key, create it (dword key and value 0) and reboot
The only issue that is annoing me is that the hard buttons to answer/ignore are locked during the phone ring. Please give me a solution for this.
Hello, X2 users...
i manage my phone to use this excellent dialer available on your device...
but i have a problem with shortcut...
Phone.lnk (default Windows system) works with dialer.
Contact.lnk (default system) launch default Windows contact manager...
• Does anybody can extract for me (only need use Resco or total commander and give LNK) the X2 default shortcut contact to work with dialer...
I already found an excellent EXE to go to Call history without problem !
Cheers... and thx if anybody can help me !
LeSScro