Bluesoliel possible solutions - JAM, MDA Compact, S100 General

i think by now many of you have gotten the bluesoliel stack to work.
However, there are some disadvantage of using the bluesoliel over the MS stack. Some of the issues i've encountered are. connectiong to telco GPRS dosn't work anymore, beaming files, etc.
can't we get 2 stacks in the phone and switch it on and off? i think we can diactivtate the bluesoliel stack by temporarily removing it in the startup.
The problem is, i remember that in order to install this stack the MS bluetooth registry entries must be deleted. can we "rename" these entries before installing bluesoleil and have the program rename it back and remove the startup bluesoliel stack?
havn't had ppc programming experience.. but i'd just like to share this thought to the developers

Related

Lan access with MDA Compact via bluetooth accespoint.

Can somebody tell me how to connect my MDA compact to my wlan router via bluetooth ? I've got a bluetooth access point (dlink DBT-900AP) that is connected by ethernet cable to my router/adsl modem.
I want to use email en internet access with my MDA Compact.
The standard built in bluetooth manager seems not to support this LAN access through bluetooth. Who can help me ?
i have the same prob ;-(
i have a qtek2020 and dlink dbt-900ap bluetooth acceess point attached to usrobotics router...
zeee
Ronnie12 said:
Can somebody tell me how to connect my MDA compact to my wlan router via bluetooth ? I've got a bluetooth access point (dlink DBT-900AP) that is connected by ethernet cable to my router/adsl modem.
I want to use email en internet access with my MDA Compact.
The standard built in bluetooth manager seems not to support this LAN access through bluetooth. Who can help me ?
Click to expand...
Click to collapse
The BT Lan Access Service using Microsoft BT Stack has been removed in the registry. It's been like that since XDA2.
I do not know if there is a corresponding driver available in MDA Compact such that you can re-enable the service via updated registry entries.
Anyone?
i think it needs the ppp bluetooth profile
and ms bluetooth stack dont have that
vidcomm bluetooth stack does....
you can try using that
henrylim said:
The BT Lan Access Service using Microsoft BT Stack has been removed in the registry. It's been like that since XDA2.
I do not know if there is a corresponding driver available in MDA Compact such that you can re-enable the service via updated registry entries.
Anyone?
Click to expand...
Click to collapse
Found the reg entry with missing configuration:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001102-0000-1000-8000-00805F9B34FB]
@="Lan Access"
and here are some more...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001105-0000-1000-8000-00805F9B34FB]
@="OBEX Push"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001106-0000-1000-8000-00805F9B34FB]
@="OBEX FTP"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001112-0000-1000-8000-00805F9B34FB]
@="Headset Audio Gateway"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001124-0000-1000-8000-00805F9B34FB]
@="HID"
Anyone knows enough of these entries?
just add those to your device, apply the other things from msdn you've found and restart your device. then scan your ppc on the pc for open services...
I have found a workaround
I'm the happy owner of an MDA Compact and a Siemens blue2net access point. Indeed, the Microsoft Bluetooth stack refused to talk to the access point, which only offers the "Lan Access" profile.
I tried the suggested registry hack. Good idea, but sadly it does not work. It would appear that the "Lan Access" profile is simply not supported by the Bluetooth stack - it has not just been disabled by deleting a few registry entries
However, I found a workaround. After a few hours of fighting with the Microsoft stack, I downloaded a free Bluetooth stack from Toshiba (http://aps.toshiba-tro.de/bluetooth/) that supports the "Lan Access" profile. I did a full backup of my MDA Compact, adopted the "brace position", and prepared for a crash landing (aka hard reset).
After installing the Toshiba Bluetooth stack, I simply had to do a soft reset to activate it. Big surprise for me: my MDA still worked. Clicking the Microsoft Bluetooth icon in the status bar now told me that my toy had no Bluetooth support; however, clicking the new Toshiba Bluetooth icon brought up a different (and better, IMHO) Bluetooth interface. From here I could see the blue2net access point. Not only that - I could actually connect to it. The rest was piece of cake: add the Bluetooth device and configure a modem connection via it. I am now happily surfing the web via Bluetooth
The only caveats I have so far are these:
1) I now have a disfunctional Microsoft Bluetooth icon in the status line. I would like to get rid of that. Please drop me a note if someone knows how to do that.
2) When using the Toshiba Bluetooth stack, the diode above the screen does not blink blue when Bluetooth is active. A small price to pay for having internet access
i am about to do as lars_juhl has stated on my xda II knowning that he messed with mda compact and i have a xda II but still i am going to do as he has stated will let you guys know wat happens.
FINGERS CROSSED !!
ok ive downloaded bluetooth stack v3.10.00 from the link that you've given and after extracting the contents of the zipped file on my desktop i have.
1.QFE (FOLDER)
2.SD_HOST_driver (Folder)
3.us (Folder)
4.AutoAns (Exe)
5.AutoOn (Exe)
6.AutoSetup (Config File I Guess)
7.lmgLoad.dll
8.Setup (Exe)
9.TbpSetup (Exe)
10.TbpSetup (Config)
11.TosBtLoad.dll
12.Uninstall
care to tell me which is the file that you installed on your pda as a bluetooth profile and i shall follow you.
regards
jeetz
I think you're supposed to download the 'Pocket PC 2002 / Windows Mobile 2003' bluetooth stack. This shows version 5.01.
Goodluck.
@lars_juhl ??
help needed here
Re: I have found a workaround
lars_juhl said:
However, I found a workaround. After a few hours of fighting with the Microsoft stack, I downloaded a free Bluetooth stack from Toshiba (http://aps.toshiba-tro.de/bluetooth/) that supports the "Lan Access" profile. I did a full backup of my MDA Compact, adopted the "brace position", and prepared for a crash landing (aka hard reset).
1) I now have a disfunctional Microsoft Bluetooth icon in the status line. I would like to get rid of that. Please drop me a note if someone knows how to do that.
Click to expand...
Click to collapse
Hi,
I've one question:
(a) Apart from Internet access, do you have other BT functions working?
e.g. Headset/Handsfree, BT ActiveSync??
The BT Tray Icon can be removed by deleting this registry key
[HKEY_LOCAL_MACHINE\Services\BTIcon]
then reboot.
If you don't wish to remove the key, you can disable it by editing this parameter value under the registry key
change
"Dll"="BTIcon_Dll.dll" to
"Dll"="BTIcon_Dll.dll.disabled"
then reboot. When WM2003SE tries to load the Dll driver, it can't find it and therefore the MS BT system tray icon will not be activated.
The download is here:
http://aps.toshiba-tro.de/bluetooth/pages/download.php
Works great on my MDA Compact too (DLINK BT-900ap).
Many thanks for this idea.
Does anyone know if there is a way to turn on/off the bluetooth radio once this stack has been installed ? I have the feeling that it is always on, consuming precious energy...
BTW has anyone tried headsets with this stack. Do they work ?
Thanks agian,
Martin
andrewpmoore said:
The download is here:
http://aps.toshiba-tro.de/bluetooth/pages/download.php
Click to expand...
Click to collapse
i did that mate downloaded the english version compatible with xp, but i wanna find out after downloading and extracting it which is the file that i am suppose to run so that the stack is installed on my pda ?
....my bt headset was recognized an paired (anycom headset) ... but is NOT working when calling...
thinksmart said:
Works great on my MDA Compact too (DLINK BT-900ap).
Many thanks for this idea.
Does anyone know if there is a way to turn on/off the bluetooth radio once this stack has been installed ? I have the feeling that it is always on, consuming precious energy...
BTW has anyone tried headsets with this stack. Do they work ?
Thanks agian,
Martin
Click to expand...
Click to collapse
Yeah, I have the same question.
And one more: After turning off/on toshiba bt icon disappers. How to fix it?
it works for me but how can i turn bluetooth off ?!! i think it goes ON all the time
Yeah, the BT icon is disappearing after turning the device off as well as sometimes ramdomly.
The set-up app (bt_setup) cannot be restarted without soft reset, I get following error "An error occured with th Buetooth Card Confirm that the card is working properly."
M.
I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality missing in the MS stack!
...BUT...
It is unstable as hell (I have experience all the bugs listed in this thread) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?

JAM [MS Bluetooth] - enable Personal Area Network?

hi all
i need a way to enable network profile coz theres some software need this profile, and bluetooth access point. i readed in microsoft.com about some registry for the MS Bluetooth and i tried to use it but it didn't works.
take a look here Personal Area Network (PAN) Profile Registry Settings .
laters 8)
I'm also looking for a way to do this, so that I can use my belkin bluetooth access point
i think it depends on the bluetooth drivers... widcomm drivers supports this feature.. the mentioned registry in the ms article doesn't exisit in the jam...
Bluetooth WidComm
Has anyone try to install the WidComm 1.50.801 bluetooth stack on the MDA Compact?? I get an error for insufficient memory.
where did you get the bluetooth stack?? can you post it up here?
Re: Bluetooth WidComm
Kevlar said:
Has anyone try to install the WidComm 1.50.801 bluetooth stack on the MDA Compact?? I get an error for insufficient memory.
Click to expand...
Click to collapse
Try to do it manually. Copy files manually to /Windows. Import registry entries manually through Resco Registry Import option etc.
Especially the registry import. Somehow WM2003SE may not like it when you try to do it via the CAB file method.
Widcomm Bluetooth
I have try to install it manually. Still the same error.
I also did a hard reboot, so the phone is clean with all the memory free. Did not help.
The MDA Compact is using Bluetooth 1.2 and the 1.5.0.801 should be compatible with Bluetooth 1.2. Maybe the is a other version of the Widcomm Bluetooth stack with support for BT 1.2.
i guess the registry isn't the same as with the mda2

BlueTooth upgrade for magician

I have recently installed Toshiba BT stack, and it works perfectly, i consider even better than Widdcom stack; but except one thing -
after switching off and than switching on my Magician the BT stack dissapears. And only Soft Reset helps.
This problem is really worth solving, let's try to do it together
Toshiba BT stack:
http://gordons095.narod.ru/str2005-01-16/files/toshiba_BT_Stack.rar
P.S. After following the link a russian site will appear and you 'll need just to click the same link again. Use MS IE to download the file, because my Opera 7.54 doesn't work.
yep and headset quality is more than terrible...and alot of profiles are missing.. btw this news is old and were still waiting for wid/broadcomm
For me this stack is much more convinient: i can connect to ActiveSync with no problems, i can transfer and receive files from any devices, i can exchange contacts and so on and so forse, and i don't have bluetooth headset.
Still, if you say it is an old program, the problem with the disapperiance of the BT icon after hybernate must have been solved.
Can you help me with this?
it has only been "partially" solved.. please use the search function to find related threads.

WM5 Bluetooth stack and DialUp Networking (DUN)

I'm at my wits end with my T-Mobile MDA (aka HTC Wizard) and my new 2007 Acura RDX. The car can connect to the Internet via a Bluetooth phone to send/receive diagnostic messages to Acura, but I'm pretty sure the MS Bluetooth stack is disconnecting during the setup. I'm able to pair the HTC Wizard just fine with the car, and the handsfree functionality for sending/receiving voice calls works perfectly using the JETWare mobile Bluetooth extension on the phone. I've tried doing some basic registry tweaks in the HKLM\Software\Microsoft\Bluetooth keys, but nothing helped. I can use my Sony Ericsson T68i phone just fine with this troublesome feature, but I really don't want to start using my old phone again. Any thoughts on what might be fubared with the DUN connectivity? I'm using the same dial strings too that work just fine on my laptop with the MDA (*99#) on T-Mobile's network. Thanks in advance for suggestions...
While I don't have specific info on your car, you may want to give a try to the
1, Widcomm BT stack (instead of the MS one)
2, AKU3 and BT PAN if your car also supports PAN and not just DUN.
Please check out http://forum.xda-developers.com/showthread.php?t=282780 on the latter q.
Thanks for the reply. I've had older Pocket PC/Windows CE devices that used Widcomm, but I was under the impression that the MS Bluetooth stack was baked into the device ROM. Do I have to reflash the HTC Wizard ROM to get the Widcomm BT stack?
RE: option #2, I'm nearly certain that the car does not support PAN, but I'll dig around and see what I can find.
Thanks again.
Hmm... I just found this wiki page:
http://maemo.org/maemowiki/BluetoothDUN
which mentions Bluetooth DUN problems on the Samsung SGH-X820, which I believe is using WM5 or similar variant. At any rate, it mentions a "receive all" flag, and I'd love to know if there's a registry setting in WM5 that's related to this suggestion.
flashfreaker said:
Thanks for the reply. I've had older Pocket PC/Windows CE devices that used Widcomm, but I was under the impression that the MS Bluetooth stack was baked into the device ROM. Do I have to reflash the HTC Wizard ROM to get the Widcomm BT stack?
.
Click to expand...
Click to collapse
nope, just install the Widcomm BT stack, not even a hard reset is needed - see the sticky thread.
Thanks again for the prompt reply. I followed the How To here:
http://forum.xda-developers.com/showthread.php?t=285696
and I also used SolSie's installation guide here to fill in some gaps:
http://solsie.com/?p=82
I used the CAB file here:
http://btfix.thcgirls.com/BroadcomBluetoothStackX51V05.zip
Bluetooth functionality seems to working ok, but I don't see Dialup Networking as a service now on my HTC Wizard. Do I need to upgrade the AKU ROM? I'm using the summer 06 ROM update from T-Mobile USA right now. Thanks in advance for any suggestions.
flashfreaker said:
Bluetooth functionality seems to working ok, but I don't see Dialup Networking as a service now on my HTC Wizard. Do I need to upgrade the AKU ROM? I'm using the summer 06 ROM update from T-Mobile USA right now. Thanks in advance for any suggestions.
Click to expand...
Click to collapse
You're right - just tested this on my Wizard. No DUN service is visible- actually, HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\BtConfig\Services doesn't contain any DUN service listed.
I'll tomorrow check this on my other 1.7 WM5 Widcomm-based Pocket PC's (hx4700, x51v) to see whether you can import this functionality in any way. My WM2003 iPAQ 2210 and WM2003SE PL720 lists this service; from the former (I only have this here at home in addition to my Wizard; the rest are all at work) a direct HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\BtConfig\Services\ and [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001103-0000-1000-8000-00805F9B34FB] didn't work though.
From what I've read on other sporadic posts, it seems that the Windows Mobile registry has a setting for enabling a "receive all" parameter for Bluetooth that fixes DUN problems. I'm sure there's a bit of a security risk in that, but I'm willing to try anything at this point.
You mean the standard BT / IrDA receive all? It's not dangerous at all - and, for that matter, it doesn't even add much to the overall power consumption, contrary the popular belief (see my related power consumption measurements)
Thanks for the reply. I read your post(s) on power consumption--excellent stuff. I can see options for IR ("Receive all incoming connections"), but not for Bluetooth, other than the discoverable option. Is there some registry parameter? That's what I'm looking--if DUN is failing during a PPP connection because a some weird rejection command, I'd like to see if there's anything I can try out to work around that.
The "Recieve incoming beams / Recieve Incoming Connections" in the IR menu in also responsible for BT file recieves. In addition to enabling the BT discoverable option, you need this to be turned on to accept file tranfers. I'm not sure about how this is going to effect DUN, but give it a shot.
This is prolly what you might have read in one of those posts that you mentioned.
BTW, the DUN service will not be offered even with the Beam Receive option enabled.
This may mean, currently, unless someone invents a way to access DUN under Widcomm, it's impossible to use Widcomm-based WM5 PPC PE devices as external dial-up modems.
Hm...
I know this is kinda off topic of DUN, but using the Axim Widcomm stack on my 8125, I loose all sound from the speaker.... anyone else encounter this?
Yes I have this problem too, can be solved just by calling someone... but then there are other problems...
1)Memory leak after turning off Bluetooth.
2)Only solution is to leave it on, but there are other issues here, for me, so far, it is my Wizard hangs(require soft reset button) or the sound of the speakers dissappears and gets redirected to the phone speaker only... after about a days use..
Hm.... well.... suck. I wish someone released a custom ROM without the MS stack
pball3485 said:
Hm.... well.... suck. I wish someone released a custom ROM without the MS stack
Click to expand...
Click to collapse
but from the axim site, you can actually remove the MS stack..

Qtek 2020 and Widcomm BT

Hello.
I have Qtek 2020 and need a more powerfull bluetooth stack, then MS. I understand, that stack from Widcomm is enough for my tasks, but when try to install it, always get a error "The bluetooth radio failed to turn ON due to insufficient driver memory available...". So, I cannot run Bluetooth Manager.
I have read many articles regarding this, and know that this is a common error of Windows Mobile, and also have found many differents ways to resolved this with Widcomm BT, like, rename two dll's, Soft Reset, remove all programs from StartUp folder, turn off a services which don't need. BUT all of them didn't help to me.
I hoped that this is a problem only for Qtek 2020, but have the same situation and for Qtek 9100.
1. Do you have any ideas, common advices for fixing this?
2. Can I setup network between BB and PDA using bluetooth via another stacks, without Active Sync?
Thank you.

Categories

Resources