Hi !
I'm using DialPad maker Deluxe 2 and it's a good software.
But it save my skin in .cab and I prefer to save it in .psk
Is it possible to convert the cab in psk file or extract the cab in the Pocket Pc instead of installing it ?
Beacause I prefer to copy the folder which contains the pad image files instead of install each time a different skin.
For example I found some skins on Yorch.net that are not .cab but folders that contains files and I think it's possible have the same result extracting cab files in a folder(if you exclude the Yorch tutorial to make skin).
Thanks and sorry for my bad english.
A good way to use cab files for dial pad skins is use cabinstll a software for PPC that allows you to install cab files without deleting them. To go back to original skin just uninstall Dialpad skin by Bong.
Thanks zedeff.
But I'd like to store all my skins in a specific folder,and I've just tried with cabinstall to install the skin in the Storage,but I find the skin file images in Windows and only a blank folder in Storage called "Dialpad Maker Deluxe by Bong's Tools".
So if I want to change skin I must install another skin and my old skin is automatically overwritten.
This is the cause because I prefer the psk file.
I hope you have understood me.
Is there a way to extract the .cab file created wth DialPad Maker and rename the files in the PC, and copy them to PPC in \DesignLab XDA Phone Skin Chooser\Skins ?
It for me could be the best solution
Related
Hey Guys,
I have been customising my extended rom so when I hard reset I get all the applications I want (Resco file explorer etc). I have been doing this with .cab files fine.
The problem is that I have files which are .exe setup files (e.g Flash player 6). These have to be installed on the PC, and the cab is copied to the XDA and run. I would like to just have e.g a flash CAB file to put on the extended ROM.
is there a way to convert the PC EXE into a XDA cab file, or some way to run the PC exe on the device automatically in extended rom?
I know some .exe setup files can be extracted using winrar which then give you the cab file, flash player isnt one of them though.
Regards,
Jez.
http://forum.xda-developers.com/viewtopic.php?t=10058
Jez said:
is there a way to convert the PC EXE into a XDA cab file, or some way to run the PC exe on the device automatically in extended rom?
Click to expand...
Click to collapse
Use Windows Registry Editor (regedit.exe) to look for the path where your Desktop Exes are extracted to PocketPC Cabs:
Look for this value:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"InstalledDir"="k:\system\hardware\pda\imate\ASync"
Now, open your Windows Explorer and go to the path. You will find your cabs in corresponding folders (e.g, folder MacromediaFlash shall contain Flash6.arm.cab and etc...)
If you need to do more complex restoration, use Restorator tool. It restores your directory and file structure, registry settings, installs cabs, writes boot screens and does everything nice...
Oh my god, you are both bloody geniouses!!
This is wicked, cheers guys!
Regards,
Jez.
Any other ways to xtracting & repacking to cab?
Renaming the file format (exe to any formats) & exe xtractor software doesn't work.
I can compress any data to .cab, but how to xtract perfectly exe files?
Convert EXE to Cab online without having to download any software
If you have an EXE file that you would normaly run on your PC to install a sofware... it looks like this online converter work to have it converted into a cab file for your cell phone!!!
try it!
1- first you need to compress your EXE file into a ZIP folder... that will create a ZIP file on your desktop.
2- then you go to http://media-convert.com/convert/
3- browse on the first field to determine witch file on your pc you want to convert .. select the ZIP file you just created...
4- on the second part of the page you will be ask what format you want to convert your ZIP file to .. on the scrolldown menu select . CAB... and hit the convert button .. the online service will do the rest ..
Basicaly will upload your file onto their server , process it and render it to you on a file download link ...
There you go you have now a CAB version of your EXE file to upload on your phone with ActiveSync...
My problem
how to say... the site is cool ,and i get my file converted. However, the nature of that file hasn't been changed into a cab. it is still an exe. I dunno if i have done something wrong when converting.
I have been able to extract the EXT ROM and OS ROMs using the NB2NBF and IMGFS tools. I know that by using a custom ROM I can save on storage space by loading in my programs. I'd like to load Pocket Informat, Alarm Today, Phone Alarm , isilo and TCPMP into the OS ROM. How do I do this? I have all their cabs. I will keep reading the forums too.
I know that some like summiter have done this. Anyone able to help me get started or point me in the right direction?
J-Man5
the only device i ever heard supporting that is walaby
dont know if it's possible with other devices
i mean the os part of the rom is well you know full already
yes it is possibel.you need a tool called [typhoonnbfdecode_v5] look for this tool and how to use somehere in the ftp, and here in the wizard forums
you need to make a dump of the os from a nk.nbf image with the above tool
then you need to extract the files from de cabs you want plus the reg settings,
simply copy the extracted files from cab to your rom dump folder
make a cab file with the reg files from the cab files an also the shortcuts to the programs.
repack the rom with the typhoonnbfdecode_v5, convert the nba image with NB2NBF back to nbf and flash,after that install the cab with reg settings plus shortcuts,
you have a long jorney ahead.
i took me several weeks to make my own rom with netcf.2,adobe acrobat e several other programs integrated to the rom.
faria said:
then you need to extract the files from de cabs you want plus the reg settings,
simply copy the extracted files from cab to your rom dump folder
<snipped>
make a cab file with the reg files from the cab files an also the shortcuts to the programs.
Click to expand...
Click to collapse
OK I have gotten the nk.nbf extracted and the EXT ROM opened using winimage and the OS ROM dumped via imgfs.
Where I am running into problems understanding is how to unpack the .cab install files for the programs I am planning on using and how to "move" them to the \Program Files\ directories that they need to be in. For example PocketInformant is loaded into the \Program Files\WebIS directory. Do I put all the files from the .cab file in the dump OS directory? Is there some sort of program that will extract the .cab file and let me look at what registry settings are being set by its installation?
What program is used to create registry settings into a .cab file?
Thanks
J-Man5
BUMP
wincecab manager ,google it.
Hey!
I want to add some apps to the Rom of my Wizard, too.
I have used imgfs tools to great a dump from my OS.
Now i want to Install Total Commander to a Folder "\Programme\Total Commander\".
How can i do this? Or is it only possible to copy the files without any folder?
Sry for my bad english
Excuse me for beeing a newbie, but can't seem to fin any way to extract the .dll and .gif files from a cab file. For example I downloaded CrossbowPhonepad.zip from http://forum.xda-developers.com/showthread.php?t=292014&highlight=media+player+skin
But I'm not quite happy with the way it looks and I would like to start to play and alter with it. But when I extract the .Cab file all i get is strange .012-fil and so on. And of course the .XML file where you se how the .dll and .gif files shall be installed.
How to I extract them (.dll and . gif) from the .Cab file??
I'v tried Winrar, Winace, Total commander.
Please Help
the simplist way
Have you tried cabdump.pl (it can be found on the XDA-Wiki, main wiki page->complete tool list -> RomTools->cabdump.pl)
But I've found the simplest way is to install the cab on your device, and then copy the files you're interested in to your pc.
There is an excellent, easy to use program called MSCEInf that allows you to work with CAB files, including drag and drop extraction of files - with their original names - from CAB installation files. It's available here:
http://www.freewareppc.com/utilities/msceinf.shtml
It's developed by a Frenchman named Benoît Thonnart.
You should also try WinCE Cab Manager.
But generally WinRar works fine. The files in the cab are simply renamed to 8.3 convention with extension showing the file number. Extract the xml and you will see what name belongs to what file. Just extract and rename.
Thanx gues...that really helped
This is my personal Calculator Skin I made to compliment udK's diamond ROM.
Thought I would share it with you...
Install:
Copy cab file to device and run.
Overwrite png files in \windows with the ones in the zip file
ty very nice
I'm curious if there is any way to modify the cab installations so that we can be asked which start menu folder we would like the shortcut to be placed in?
I have the Start Menu set up so nicely (thanks to Indagroove) but any time I update an app or install a new app I have to go move the link and then restart my phone so it does not appear in the 6.5.x Start Menu.
Any real developers have any ideas?
Way 1
buy "WinCE Cab Manager"
install it on your PC
open .cab files with it
modify .cab files
save .cab files
Way 2
same as above... but as someone who already has WinCE Cab Manager
Way 3
extract files in .cab
edit the files in the .cab with notepad, ultaredit,...
hope it will be ok
repack .cab
easy...
That's what I do now.
Oh well, thanks for replying though.