Greets.
i'm an qtel s100 user and i need the "no hardware found" patch.
Anyone know where to get it? (except from the site of clubimate)?
Thanks.
here it is :wink:
Thanks
what is the use of this patch ?
It is a fix for the "no harware found" problem that has plagged some (read all) Magician.
It works wonderfully well. And now, with the reverted callerid app, I now don't have any kind of problem with my S100.
It is a fix for the "no harware found" problem that has plagged some (read all) Magician.
It works wonderfully well. And now, with the reverted callerid app, I now don't have any kind of problem with my S100.
I have the same problem: "no hardware found" but how can i use the patch.
Please help
To install the CAB, uncompress the attached RAR file (using WinRar), the copy the CAB file anywhere on your PPC and run it from there. The CAB file will delete itself automatically after the installation process is finished.
Isn't the BT patch included in a ROM? And if so from which version?
regards
It was not present on my 1.12.00
Related
How to install widcomm BT 1.5.0 stack? is it copying all to /windows dir? i alredy installed version 1.4.60, do i need to uninstall it? i've done copying the files of 1.5.0 to windows dir and the error is when i tap new it says "No Valid Wizard Pluin Found!" HEEEEELLLLLLPPPPPPPP!!!!!!!!! THANX
You have to adjust the registry keys to let the new stack to work. See at the link
http://forum.xda-developers.com/viewtopic.php?t=11364
how it is done for version 1.4.59
Maybe that will help
Mark
Help me pls, tell me the step-bu-step on how to install bluetooth-GPS 1.5.0. It keeps saying "No valid wizard plugin found!" AAAhhhhhhhhh!!!!
Help me pls, also i cant run the fixed_after_registry.reg files under resco registry plug-ins!!!! Thanks
hi double_ofour,
where did you get it?
THANX
buzz
Here, if you installed it succesfully, let me know how
http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm
I've recieved a QTEK9100 (HTC Wizard) from my employer. The ROM-version is 2.18.7.4 NOR.
This unit seems to be application locked in some way.
Among other things, I have tried to install two different sharewhare GPS-programs on this unit (PTGMAP and OZIExplorer). When installing or running the .exe files i get error messages like:
- "Cannot open the file PTGMAP. It either lacks a signed certificate or cannot find one of the components" (my translation).
- ".. can not be installed because it does not have a digitally signed certificate" (also my translation)
- or simply "cannot be installed"
I've searched this forum and quite a few others, but I have not been able to find a solution. I've found some .cab files, but these have been for other units that the QTEK 9100/HTC Wizard. I was even able to install this one, but it seems to have made no difference:
ftp://[email protected]/Universal/Extended_ROMs/Default_Signed_DisableSecurity.CAB
(I do realise this is for another unit)
I've also tried SignCode - It's says that the executable is certified, but I still get the same error message when I try to run the programe.
Finally, because my ROM has been configured (by an external supplier) with Pylon Anywhere for syncronization, I guess I can't install another ROM, as I will lose this software which I need.
Can anyone help me here? --- Please!?! ---
Try this reg tweak
Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM\Security\Policies\Policies\0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM\Security\Policies\Policies\0000101a = 0 (DWORD decimal)
Registry editor
but... I've tried to install the registry wizard:
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
But I get the same error-message "cannot install RegistryWizard_PPC_ARMV4.cab"..
Any ideas?
Copy this exe to your device via activesync and click on file through file explorer. It is a registry editor and go to those keys i described.
Still doesn't work
I've tried this in every possible way now:
- I've copied the file to my "mobile unit" in windows explorer with ActiveSync running.
- I've put the file in the file-sync and synced.
- I've copied the file to my storage-card using a card-reader.
... Everytime I try to run the file, I still get the message "Cannot open regedit_463. It is either not signed with a signed certificate and so on..."
I am considering a ROm-update, but if I install a new ROM, I'll lose all the syncronization software from my employer, right?
Any futher help is greatly appreciated! Thanks!
Re: Still doesn't work
kloksa said:
I've tried this in every possible way now:
- I've copied the file to my "mobile unit" in windows explorer with ActiveSync running.
- I've put the file in the file-sync and synced.
- I've copied the file to my storage-card using a card-reader.
... Everytime I try to run the file, I still get the message "Cannot open regedit_463. It is either not signed with a signed certificate and so on..."
I am considering a ROm-update, but if I install a new ROM, I'll lose all the syncronization software from my employer, right?
Any futher help is greatly appreciated! Thanks!
Click to expand...
Click to collapse
Try the above file in main memory - take your storage card out and soft reset. Then click on the file again - sometimes it is a corrupt storage card that causes that error. Otherwise its some software thats caused this security error and you will need to hard reset or update rom. Yes you would have to reinstall all your software.
Hello,
I unlocked my ExtROM2 on my Qtek 9000, now I can install softwares on it, but whatever the software I try, I have an error message saying I can't execute it because of a certificate problem ... Also, the icons of the softwares installed on the ExtROM2 do not appear normally, just like if it couldn't recognize what type of file it is... I am using WM5.0 AKU 2.
I searched for informations about it on the web but didn't find anything ...
Can someone help me ?
Thanks a lot !
Anyone else got this problem ?
Hi all,..
I would like to know if it is possible to use the WM6 internet sharing on a official T-Mobile NL WM5 ROM.
Is there a (working) CAB file or something?
Regards
A.
Just copy the files to the Windows folder and create a shortcut under Start Menu>Programs>whatever folder you want.
Try this. Let us know if it works.
---
Well,..
same error. I've recently tried the CAB file from an earlier post (maybe the same one as this one),...and get the error:
INTShRUI.exe is not a Valid PocketPC application.
please advice...
regards
A.
Cheers, been looking for this
Thanks for that, have been looking for this app. for awhile now.
Softbank X01HT (Hermes) ROM contains those files, but reports "IntShrUI.exe is not a valid Pocket PC Application" when executed. The files on the X01HT ROM were: IntShrUI.exe 184 bytes, intshare.dll 208bytes.
The files posted above execute properly and detect my net connections. Now I just need to find out what to do about this message: "Cannot connect for an unknown reason. To change your connections settings tap Settings."
Will post if I find the answer.
INTShRUI.exe is not a Valid PocketPC application.
not work on my Eten M600+
but thanks anyway
Works great for me on my WM5 XDA Flame, by cable and BT !
Thank you very much !
Im gonna try it on my Treo 700wx and tell !
Hope it works!!
Have you voted guys?
Nope. Not working. Donno how to make it work.
Not workin for me too..
Hello guys,
I have cooked my own ROM for my E-TEN M700 with Windows Mobile 6.1 inside. It can be found here: http://eten-users.eu/index.php?showtopic=14257
The Problem
There is only one issue I can't find any solution for! By default E-TEN comes with an application very simelar to autorun.exe for HTC devices or the great UC tool in order to automatically install OEM packages from ExtROM. It is called CustomInit. Ufortunatelly I had to discover that none of the mensioned tools works. CustomInit returns with XML-parse error, but there is no mistake in the oem.xml. UC2.0 tells me something about failures, too.
Indead I discovered installing cab files manually after hardreset does not work. Even microsofts WrlsMgr.exe does not start. After rebooting the device once, everything is ok. Running UC2.0 again (by resetting registry values,...) works perfect.
The Question
Can anybody explain me, why I can't install any cab files just after hardreset? Why must I reboot once in order to make cab installation work?
Regards.