Related
Hello everyone, I bought my O2 XDA ll mini just a few days ago ....so I am still a newbie.
I am trying to attach photos to my contacts and I get the message below:
"Unable to execute Caller ID. Please make sure Caller ID has been installed on your pocket PC. 36003:115:0"
I get the ID of my contacts when they call me.
Does anyone have any suggestions?
Any help will be much appreciated.
Thank you.
I would try a hard reset as occasionly you get issues with software not correctly installing. Or you can make a copy of your extended rom then executev the cab file again.
apple_power said:
I would try a hard reset as occasionly you get issues with software not correctly installing. Or you can make a copy of your extended rom then executev the cab file again.
Click to expand...
Click to collapse
Hello thank you for your reply, The hard reset did not work. What do you mean by cab file?
I tried to install the applications and it says that the rom is not compatible..I have ROM version: 1.13.00 WWE
ROM date: 18/8/2005
Radio version: 1.13.00
Does anybody know were I can find the compatible applications?
Is the caller ID application in these?
Thank you.
Well the application I found in this site works like a charm!!!!
Thank you all..
What program was that. I have a BA and I am experiencing the same problem.. I have WM6 installed.
Try adding the photoes using outlook. There is also a nice program named "Photo contacts pro"
Hi,
I send my first W2003SE application.
This is a free application (it's a beta version written in c#, and requires .NET CF) and is capable to detect a change in the phone owner identity via the next comprobations:
- The user can be configure a list of preferred SIM Cards
If the inserted SIM card is not any of the owner preferred sims the application send's a sms to a configured phone (including a configured text and the SIM identifier of the inserted card)
[Obviously, the application sends the message without prompt for user msessage send confirmation and not stores the sms at the outlook tray's]
[obviously, if the new user inserted sim is a prepay sim and the credit was 0, none sms is sended]
Additionally, the application show's (if configured) a balloon notification.
- The application test (if configured) the value of the Owner identity and if changed sends a sms and / or shows a notification...
Please, test and send me your comments...
regards
Also tested it for WM05?
Nadavi :?:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
frigit said:
Also tested it for WM05?
Click to expand...
Click to collapse
sorry,
i have a qtek s100 with w2003se...
please, test in w2005 if you have... and send me your comments...
thank's
Seems to be working on my xda2i - no slow down of unit and no lock-ups tho only second day of use.
Thank you Bartito
Sorry but doesn't work on my MDA Vario.
First I had to install OpenNet Cab and after that I got an error that it couldn't load some NotifyIcon.
I was in a hurry so I didn't check that good, I already uninstalled the program but I will sure will try a new update, the idea is real good
bartito said:
frigit said:
Hi, sounds similar to another program on this forum. What happens if the user performs a hard reset? In any event I will give it a go soon.
Click to expand...
Click to collapse
hello,
1) i have showed 2 threads in this forum about this problem.
one works with owner data but no with sim data, and another works with the sim, but the user is obly to store a special number at the sim ownered numbers list (i don't have tested any).
this application works with owner user data and stores the valid sim identifiers in a configuration file.
2) in my opinion, the correct usage is:
a) install the application
b) c9nfigure settings
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards
Click to expand...
Click to collapse
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul
c) copy the application and the configuration file at the rom
in this case, a hard reset is not a problem, ok ?
regards[/quote]
Bartitio, could you please clarify what is required in point (c)? Where exactly do I copy the files too? I also have a Magician. Thanks Paul[/quote]
Hi,
I have read more threads in this forum about the mode to make your owner rom.
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
frigit said:
Tried the software but got the following error:
"An unexpected error has occurred in SecurePocketPhone.exe
Select Quit and then restart the program, or select Details for more information"
Upon selecting details the following error message occurs:
"SecurePocketPhone.exe
TypeLoadException
Could not load type
OpenNETCF.windows.forms.notifyicon
from assembley
OpenNETCF.Windows.Forms,
Version=1.4.50804.0, Culture=neutral,
Publickey Token=30C767B29D52D6
Any ideas?? I have the opennetcf file loaded
Click to expand...
Click to collapse
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Thank's
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
molski said:
bartito said:
I have updated the cab file with a newly version that don't need the OpenNetCF.NotifyIcon class.
Click to expand...
Click to collapse
Sorry, but this doesn't work on my MDA Vario with latest Qtek Rom and OpenNET CF installed.
But maybe my problem is that I use WM5 and not WM2003
Click to expand...
Click to collapse
Ahhh!
It's possible.
I have tested only in w2003se.
I don't have a w2005 pocket...
sorry
That's too bad....for now!
I will stay and follow this topic, would love to see this work on my Wizard.
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
molski said:
By the way, does it stay freeware, or are you planning something like a license key, or maybe something like a free donation?
Click to expand...
Click to collapse
This project was freeware for every...
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
frigit said:
Hi Bartito, not sure if you updated your first attachment, but I downloaded it again and got the same error.
Click to expand...
Click to collapse
Please,
install the OpenNET CF assembly libraries (follow this link: http://www.opennetcf.org/fget.asp?file=SDF14CABs.zip&dir=/bin)
Thanks
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Bartito for President!!!
inquartata said:
Bartito for President!!!
Click to expand...
Click to collapse
No, no... i idore my anonymity.
please, send me any comment or bug.
thank's
inquartata said:
Hi Bartito!
Thank you soooooo much for this App!
I had the same problems as frigit with the same error-message and I thought I had the right .NET CF but it didn't work. Now it is workign perfectly. Thanx for the link!
Click to expand...
Click to collapse
Do you have a Wizard (with WM5), or some device with WM2003?
Tnx!
...ok.
I just got a TyTN. On my HTC Universal, there was a MMS console or something...forget what they call it...
But it was flawless and there isn't one on the TyTN from what I can see...
Can someone help me out? It MIGHT be my general non-familiarity of the device so I don't see it...but I don't see any programs or settings that even come close to referencing it...
Thanks...
If I understand the questions correctly
From messaging.
Menu
Tools
Options
Select MMS
You have to install the Shortcut-MMS.cab from ExtendedROM.
I for one, didn't install it, cause the whole messanging application (SMS and E-Mail) starts much faster without MMS installed.
At the moment I'm searching for a proper replacement for MMS that's not that lazy.
Missing MMS Menu on HTC TyTn
Hi,
I have the same problem on my HTC TyTn. In fact, MMS menu is missing. I've read the answer but I don't know where I could find shortcut-mms.cab.
Could you help me, please.
Jee
unhide the extendedrom as described in the extrom unlocker thread. then you should find a file *shortcut*mms*.cab in the dir /ExtendedROM
Hi,
Thanx for answering. I've tried what it explained, but nothing happen. My phone coming from SFR (vodaphone). Maybe there is something else to do.
Regards
ROM Version 1.23.163.3
ROM Date: 06/18/06
Radio Version: 1.16.00.00
Protocole: 32.53.7018.01W
Me, too, and I think I've got it figured out..
I have most of this problem solved but need one additional piece of info (at bottom); maybe someone can fill that in for me.
I got a new 8525 from Cingular.com the day they came out. The letter 'A' stuck so I had to exchange it for a new one. The first 8525 I had showed the MMS directory just fine but the second one they gave me did not. I'm not aware of any differences in the way I set them up or how this could be, but MMS has been missing from my second 8525 since I first fired it up. Cingular support was no help.
Here's what you need to do to fix it:
(1) You need to unhide the Extended ROM. Info on doing that can be found here:
http://forum.xda-developers.com/showthread.php?t=283750
Note that in my situation my phone was already SIM unlocked, and I found that I did not have to CID unlock my device in order to fix this problem. Information on what the difference is between SIM unlock and CID unlock can be found here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock
(2) Now, when you open File Explorer, you'll see a new folder listed called "Extended ROM." Open that folder and you'll see a list of .cab files that can install various things for you.
Run the MMS installation .cab file called "MT_Shortcut-MMS-Hermes" to install the MMS function that somehow got missed in the initial setup. I found that I was not able to install this program to Extended ROM, and I did not try to install it to the storage card, but it installed in my Device memory just fine.
Open up Messaging, and you should now see the MMS folder, unless you soft reset, in which case you have to re-install. In my case, no configuration of the MMS function was needed, and MMS works just fine.
QUESTION: Whenever I soft reset my phone, I lose the MMS function again and have to re-install from the .cab. How do I make MMS a permanent feature of my phone?
I hope this helps folks get at least as far as I've managed and maybe someone else can help finish answering this problem. Thanks in advance.
OK...
Let's say a stupid asshole erased his ext-ROM and is now missing the whole Shortcut-MMS.cab .
Is it possible to flash back only the ext-ROM ?
Can someone send the .cab to the asshole (meaning ME!) ??
Thanks
Replying to myself :
contents of known extended roms are here :
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
scott4 said:
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
Click to expand...
Click to collapse
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Spatzm said:
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Click to expand...
Click to collapse
when I press "New" button in order to write a new SMS (text message) of my 818pro. The content of the message is just a blank screen, I can do nothing with it except closing it. This also affects on MMS and Email.
Is there anything corrupted?
scott4 said:
Is there anything corrupted?
Click to expand...
Click to collapse
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Spatzm said:
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
Click to expand...
Click to collapse
Hello Spatzm,
Thanks for your reply.
a) 23.85MB RAM left
b) ce-star suite v2.8 r2a
c) yes, i can uninstall and install new software.
--> this problem exists right after I sync the data and then press soft reset button. Is this the point? because whenever I press reset button, the SMS I wrote disappear even my pda has been just done a hardreset.
niloofari said:
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Click to expand...
Click to collapse
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
scott4 said:
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
Click to expand...
Click to collapse
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
niloofari said:
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
Click to expand...
Click to collapse
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
scott4 said:
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
Click to expand...
Click to collapse
Probably a ROM issue then. If you recall my reply above with the few questions. I initially had in mind that you might run into the security stuff (certification messup) issue but this is not the case.
scott4 said:
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Click to expand...
Click to collapse
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
mikechannon said:
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
Click to expand...
Click to collapse
Hello Mike,
Thanks alot for your explaination. The data cannot be written immediately, so that should not press soft reset button right after a SMS (text msg) is written. This question is answered well.
However. My main problem is why the SMS writing page became blank and never recover until a hardreset? I had this problem after sync PIM and then pressed soft reset button.
scott4, nice to meet u Do u come from HK?
I have the same problem before...
At that time , I used AKU2.? (forget XD) and ce-star too!!!
After hard reset for about a week.....the problem will appear again= =
SO i always reset -> blank -> reset -> blank -> loop....
until I upgrade my 818pro to 2.3, ...
and I don't use ce-star again....since it always hang= =
firstly i use monster chinese...but i found that the font is very ugly.....
so at last , i don't use monster chinese anymore, I only copy mingliu font from my winXP, and edit the registry to let my 818pro can read chinese....
Also , I download the Chinese input method from monster website, but without using monster XDDD
I don't know it's the problem of AKU? or ce-star? or just i'm very lucky.......
I want to upgrade to AKU3.3 too!!! many people say that it's very fast when you compare 3.3 to 2.3.........i wanna try it~>< But now....I'm afraid the SMS blank problem will appear again= =XD
it's the problem of cestar, i used to have the same problem with cestar installed, after uninstall it the problem was gone
This is my private message send to one of the member of this forum. Just created this thread for everybody can view it and help me with it..
--------
ei,
nid help for my sim menu..
i tried to download 3 different roms in my PDA (O2 IIs) and all of them has the sim menu.
however, all of them has a problem accessing to this menus. (thats the reason why i reflash and reflash again different roms for me to check what is the problem.)
my sim is also a retailer sim and i read some of your post that your are also a retailer. so im asking if how did you manage to enter and have access to you sim.
ok, maybe you are having a hard time imagining what im trying to imply with "access" and "enter".
in my previous mobile phone (n70), i can send load one's number using the smart menu HOWEVER, in my PDA, although i can see the menu, enter in the first level where i can see the options like phonebook/inbox, buddy balance, PLDT load and etc. But when im trying to enter some of this options, there is no joy. I cant access this options. i cant select one of them. even clicking or double clicking it will not gain you the access to enter the 2nd level.
thus, i cant use them but i can see the first level.
So hope you can also help me with this. I have difficulty trying to extract my sim card and putting it to another phone just to load up myself and other mobile phone.
Thank you very much in advance for your response.. thanks.
Ill be waiting for it.
Thanks..
jamcute18m said:
This is my private message send to one of the member of this forum. Just created this thread for everybody can view it and help me with it..
--------
ei,
nid help for my sim menu..
i tried to download 3 different roms in my PDA (O2 IIs) and all of them has the sim menu.
however, all of them has a problem accessing to this menus. (thats the reason why i reflash and reflash again different roms for me to check what is the problem.)
my sim is also a retailer sim and i read some of your post that your are also a retailer. so im asking if how did you manage to enter and have access to you sim.
ok, maybe you are having a hard time imagining what im trying to imply with "access" and "enter".
in my previous mobile phone (n70), i can send load one's number using the smart menu HOWEVER, in my PDA, although i can see the menu, enter in the first level where i can see the options like phonebook/inbox, buddy balance, PLDT load and etc. But when im trying to enter some of this options, there is no joy. I cant access this options. i cant select one of them. even clicking or double clicking it will not gain you the access to enter the 2nd level.
thus, i cant use them but i can see the first level.
So hope you can also help me with this. I have difficulty trying to extract my sim card and putting it to another phone just to load up myself and other mobile phone.
Thank you very much in advance for your response.. thanks.
Ill be waiting for it.
Thanks..
Click to expand...
Click to collapse
We too have the same problem in Hima since wm5. Finally there is one new rom with a working STK for himalaya. Get more info from Hima wm6 forum.
Which of the Hima's rom is working with STK ?
JP
JPBRA said:
Which of the Hima's rom is working with STK ?
JP
Click to expand...
Click to collapse
PDAVIET ROM (Build 19213) has a working STK. Me & some others also tried to extract the STK out of it and to create a CAB to be used in other ROMs. But we all failed. If U do it successfully, shere it with us too....
UP for this thread..!
can anyone who is expert solve this problem..?
UP!
UP!
shiranmotha said:
PDAVIET ROM (Build 19213) has a working STK. Me & some others also tried to extract the STK out of it and to create a CAB to be used in other ROMs. But we all failed. If U do it successfully, shere it with us too....
Click to expand...
Click to collapse
Yes, i saw somewhere else that doing it by cab didn't do the trick since it was impossible to update some areas which are embbeded in the ROM.
I have absolutely no idea and no know-how to do it.
I've tried on PDAVIET 19213 ROM download, but i can succeed. If you have the link for rapidshare or else, please tell me.
JP
Ok, so i managed to download ROM WM6.1 CE OS 5.2.19213 (Build 19213.1.0.4 PV DVH) and installed it on my BA, and the STK Menu remains not working.
Any thoughts ?
JP