Using wifi to surf - Networking

I've bought a Sandisk wifi card for my XDA2 and I'm having difficulty using it to surf the 'net. An example, a friend of mine has a wireless network at his home and whenever I pick him up the XDA finds the network and asks if I want to connect to the web. I then launch IE which then tries to connect with GPRS. I've looked at the settings but I'm unsure what to change to allow IE to use the wifi connection. Someone here must have experience setting this up. Thanks.

has your mate set his wep encryption correctly? ask him to set it to open and see if that lets you on. On your security settings make sure you turn off any encyption. Once thats done, and you are on, then re set both security levels and try again and type the wep key for the router into the xda/sandisk settings. If that fails from memory, select work instead of internet on the xda.

When I go into the settings for that connection it says it's open with no encryption. There's a similar network at work although I suspect it's a nearby school - open network without encryption. I thought this would be easier to set-up! And what is a wep key?

Related

Having Problems Connecting with Wifi!

I have a MDA PRO
Rom Version: 1.12.42 wwe
Radio : 1.08.00
Protocol: 42.41.P8
Ext rom: 1.12.126 WWE
What I want to do: I am trying to connect to the internet using pocket internet explorer using my wifi network at home and not GPRS.
The problem: I go to 'Settings' >>"connections" tab >> 'Network Cards'>> "wirelss" tab
It displays my wifi connection and it says "available" so I {tap and hold} and select 'connect'. It then states that it is 'connecting' but it doesnt connect and reverts back to saying that my network is "available'.
What am I doing wrong? Do I have to set up something on my pc? Any additional settings on my Universal that i should initiate?
I tried searching the forum with no luck in finding someone with the same problem. Is there a thread with a guide that can help me out. Thanks for your time.
soft reset the phone
then no need to go into settings
on today screen (main screen) touch the "G" at the top
it will ask you if you want to activate wifi
select
it should connect automatically
I have exactly the same problem with my M5000.
Can anyone help?
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
What happened there ! :roll:
On the Blue Angel, it was simple - you just set up a new connection, enter the PSK, connect and off you go!
On the Universal, however, I'm having no joy. I've set up the WEP and PSK stuff and the PDA can connect to the network, but when I try and open IE it opens up GPRS. Also, PC Anywhere only works via USB - again, it won't connect via WiFi. I'm sure it's just a case of adjusting some settings but I don't know which ones!
Wifi Connection Problems
Hi I'm experiencing exactly the same problems trying to connect.
I have a Wanadoo Livebox and my xda exec.
I've tried with my connection both unsecured and with 128bit wep encryption using the correct wep key....I still get connecting, followed by available, repeated continuously?
I have the xda set to connect to "the internet" and the authentication to "open". Key index is 1.
Can anyone help?
Thanks
Tim
Wifi Connection Problems
Hi, Just a bit more info...
Encryption is set to "wep"
Mac address is associated with the livebox.
802.1x is ticked to use IEEE 802.1x network access control.
EAP type is Smart cCard or Certificate
Thanks
Tim
Rom version 1.13.82 WWE
Rom date 11/30/05
Radio version 1.04.02
Protocol version 42.37.P8
ExtROM version 1.13.188 WWE
I just checked (with my Blue Angel) that the router and everything else is working and I'm happy to say it all is.
I set up the new connection on the BA from scratch - WPA-PSK enabled, nice long PSK, and I'm using TKIP. Network connects to: The Internet.
This allows me to remote up to the PC via PC Anywhere, and allows me to connect to the 'Net for free via the WiFi router.
When I duplicate the settings on the Universal, neither of the above works. What am I doing wrong?
Help!
You haven't got mac address filtering enabled on your router, and have forgotten to add your Universal's mac address to the list, have you?
Cheers,
Steve.
No, it's disabled.
hehe i had this problem tonight and was going to post up.
Has your router got MAC-control or anything on it? My SSID is not set to broadcast so I put the settings in manually.
I deleted the settings, and put them in manually again a few times, making sure I had the encryption stuff set correctly.
Eventually it connected and now seems to be working fine.
JAmes
Ad Hoc?
Ok, I've tried every possible combination possible and nothing is helping. So my next question to get around this problem>>>>>>>>>>>>>>>>>>>>>>>>>
Can I use my pc as a ad-hoc and us it as my gateway for my Universal?
I have a pc in the office down the hall with the actually wireless router, I have a pc in my room that is accessing the wireless router from the office.
Please let 'US' know if you have tried ad hoc or if you find the right settings to connect to the main wireless router.
Thank you
I am on my wifi network typing this, and my settings show 802.1x network access control not having a tick and network adapter connected to Work......on my iPaq hx4700 before, I used these same settings as they seemed to work well, although it ran WM2003SE not WM5.....
All this said, however, but I was lucky in that my MDA Pro connected to my wifi network at the first attempt - except not with as strong a signal as the iPaq had.....
Wifi Settings
Can anyone who has connected okay, let us have their full settings, so that we can try them?
Is your Router set 802.11g only?
You need to set the router to accept 802.11b and 802.11g.
If your router will only output at 54g, you could try the hack to switch the universal to 54g. I am yet to try this so I don't know if it works.
My MDA Pro connected straight out of the box once I set the ssid and encryption.
Hope this helps
Dave
I've been on the phone talking to 3rd line support at Orange.
Basically, the guy is totally flummoxed!
After trying to talk me through the setup from memory, it seems as though a whole menu of WiFi settings has disappeared from the phone - specifically, the ones that we need! This being the case, he's going to get hold of an M5000 tomorrow and will then bell me back so we can go through the whole process together, both of us using an M5000.
One thought that did occur to me was this: I've only just (like, 3 days ago!) upgraded to the M5000 and I've taken on some kind of free Internet access scheme with my tariff. Could it be that the settings for that (that are sent by Orange in a data SMS) have knackered the WiFi setup?
I'm considering a hard reset with a soft reset before the .CAB files install but will at least wait until tomorrow.
I'll keep you all posted....

Internet via wifi only works if I select 'work'

I was finally able to go online using the wifi. Where it asks what the network connects to, I had to change it to 'Work' instead of 'The Internet.' The problem is now I can't connect to any internal ip's such as my router or other networked computers. A bubble pops up over the wifi icon on the taskbar telling me I need to change my connection settings. Any ideas how to fix this?
Hi bendog2784!
The internet profile is used together with vpn connection settings and the work is for direct internet connection. The difference is in encryption but access should be the same so perhaps your problem is because of incorrect ip settings.
I have since got it to work. I think a lot of it had to do with the tmobile proxy. Not entirely sure though.

Network Key Required

I have a wireless network at home that is secured by WPA-PSK. When I access the wireless network on my phone it says a network key is required and I enter it. The wi-fi will work for a few minutes and then it will ask me to enter the network key again. Does anyone know how to store the password so I don't have to enter it every time I use my wi-fi at home, or a way to stop it from continually asking me for the password?
This is a strange behavior. Normally the password is saved automatically, in fact once a network is detected all its settings are automatically saved and there is no manual option to do it.
Unfortunately I never heard of such problem before so I have no idea what could be causing it.
Hi,
Very strange behaviour indeed! Anyway, let's see what we can do for you here.
It appears that you have not configured the network key on your network. If you had, this would have permanently stored it for you and not keep asking you for the key as though you were trying to piggy-back on someone's network.
Now, you wouldn't do that, would ya? War driving is against the law over here in the UK.
Here's what to do:
1. Enable WiFi
2. Start->Settings->Connections->WiFi
3. Click on your own specific network
4. Click - Next
5. 'Configure Network Authentication' screen appears
6.
Authentication: WPA-PSK
Data Encryption: AES
The key is automatically provided: blank (i.e. unticked).
Network key : xxxxxxxxxxxxxx (you MUST enter it here by yourself)
Key index: blank (i.e. unticked)
7. Click Next
Use IEEE 802.1x network access control: ticked (automatically, by the system)
8. Click Finish.
9. Soft reset your device for the settings to take effect.
.......and voila! no more network key questions.
Hope this helps.
kiwi992.
Well that didn't work...it's still doing the same thing
Hi,
Hmm........ What next? I ask.
This time, we'd have to concentrate on your router settings. This seems to be the culprit since everything in the device is configured exactly as we discussed in the last posting.
Did you use Windows to configure your wireless connection settings for you or did you configure it manually, using the CD that came with your router? I did the latter for better control.
If you used Windows, then navigate to: Start->Control Panel->Network and Internet Connections->Setup or change your Internet connection.
If you used the CD that came with your router to configure it, then look towards the bottom right of your PC or laptop and you will see a dark green icon which says (e.g.) 'Netgear WN511B is connected to........' Click on it to ensure that the security is set to WPA2-PSK[AES] and that the network key is entered manually.
Either way, please:
1. Check your router settings to ensure that it has not been set to prompt for network key.
2 Ensure that the network key is NOT automatically supplied by the gateway. If the radio button is ticked in your configuration, un-tick it.
3. Check your Windows Network and Internet Connections settings if you've used windows to configure it.
I am using the same security as well as encryption and I don't have such problem.
Hope this helps.
kiwi992.
throwing in my two cents...
kiwi992 said:
Hi,
Hmm........ What next? I ask.
This time, we'd have to concentrate on your router settings. This seems to be the culprit since everything in the device is configured exactly as we discussed in the last posting.
Did you use Windows to configure your wireless connection settings for you or did you configure it manually, using the CD that came with your router? I did the latter for better control.
If you used Windows, then navigate to: Start->Control Panel->Network and Internet Connections->Setup or change your Internet connection.
If you used the CD that came with your router to configure it, then look towards the bottom right of your PC or laptop and you will see a dark green icon which says (e.g.) 'Netgear WN511B is connected to........' Click on it to ensure that the security is set to WPA2-PSK[AES] and that the network key is entered manually.
Either way, please:
1. Check your router settings to ensure that it has not been set to prompt for network key.
2 Ensure that the network key is NOT automatically supplied by the gateway. If the radio button is ticked in your configuration, un-tick it.
3. Check your Windows Network and Internet Connections settings if you've used windows to configure it.
I am using the same security as well as encryption and I don't have such problem.
Hope this helps.
kiwi992.
Click to expand...
Click to collapse
Hi Kiwi392 and CapitanOats25:
I've been working to resolve a similar problem with WEP, and learned something I thought might help in this case: On my router, a NetGear WGR 614 v.6, when I enable WAP PSK I get an entry field labeled "Key Lifetime." By default mine is set for 60 minutes, but you can set it for longer. Perhaps that is the problem?
I hope that helps.

New Touch Diamond 2 Wifi Wont Connect

Hi Guys & Gals,
I have a brand new HTC Touch Diamond 2, on O2 network - this is an untouched device, all i have done is booted it up and sync'd it with my PC,
I have tried to connect the device to to wireless networks now with no luck.
1. My home connection - security enabled WPA-PSK password protected, The phone can see the network, i type in my network key - i also checked the password on my router setup. The little spinning circle comes up and try's to connect with no luck. It will then keep trying for as long as the wireless is on
2. Home connection again with no encription - again the same thing
3. Work connection WEP secured, type in the key, same thing again.
Has anyone encountered these sorts of problems before in the past - if so how do i fix it so i can connect wirelessly.
Cheers Guys
JdeRonde
Doubt if this is an issue with the phone more likely to be a setup of the wireless.
What router do you use?
Do you have MAC Filtering enabled?
Do you use your router as a DHCP server?
Are there any error messages displayed on the phone?
When it doesnt connect and you tap the notification area (top bar to the right of START) do you have any messages there?
jderonde said:
Hi Guys & Gals,
I have a brand new HTC Touch Diamond 2, on O2 network - this is an untouched device, all i have done is booted it up and sync'd it with my PC,
I have tried to connect the device to to wireless networks now with no luck.
1. My home connection - security enabled WPA-PSK password protected, The phone can see the network, i type in my network key - i also checked the password on my router setup. The little spinning circle comes up and try's to connect with no luck. It will then keep trying for as long as the wireless is on
2. Home connection again with no encription - again the same thing
3. Work connection WEP secured, type in the key, same thing again.
Has anyone encountered these sorts of problems before in the past - if so how do i fix it so i can connect wirelessly.
Cheers Guys
JdeRonde
Click to expand...
Click to collapse
I too had problems with WIFI. My home work network was visible but it would immediately drop or not be able to connect. A few days later it started working flawlessly and I have no idea what changed.
I am sure you have tried a soft reset but just in case...
Tony
I have a NetGear DG(Some Number) v4 ADSL wireless router, which i have set up and works for all of my other devices (ie. Laptops, PS3). With a simple encription key.
I get no messages etc, all it sais is that its 'not connected' and there are no new notificatons
It then persists in trying to connect again and again, when it cant connect for a while, it then comes up with 'new network connections found' in the notificatins area.
I have switched the power mode to best performance with no luck.
I have tried on 2 different networks now. including with all encription off. WEP and WPA-PSK - This is driving me nutz cuz i love the phone, i just want to use it to browse the web without paying out the nose for it.
DHCP server is dynamic from my ISP.
I have contacted HTC now about the issue, but im going to feel so stupid if it turns out to be somthing simple like a setting on the phone somewhere.
But thanks for the reply
Have you checked you arn't using MAC filtering?
Log-in to your router and check under Wireless settings > Wireless Station Access List.
While you are on your wireless setting page check what Encryption your using for WPA-PSK? TKIP? (The wrong encryption chosen will cause you not to be able to connect)
Ok maybe telling you how to suck eggs but on your phone:
Settings > Communication > Wifi
Select Advanced at the bottom right.
Select Change Network
Click Add new...
Type in the name of your network (The SSID also found under wireless settings, Case sensitive)
Select Connects to: The Internet
Leave the other two boxes unticked.
Click next.
Select the correct Authentication - WPA-PSK is different to WPA2-PSK. You will probably be using WPA-PSK.
Select the correct Encryption (Propably TKIP)
And type in your Network Key
Click Next and Finish.
How does this fair and what are the results of checking info on wireless setting page?
Im at work at the moment trying to connect to the WEP connection,
This connection most deffinatly does not have mac filtering on it, just asked the network tech.
Okies.....
Changed the network key to.... Shared key and it works
so i am guessing that it must be somthing to do with my setup at home..
Cheers guys
Cool.
Just match up the Authentication / Encryption / SSID and Network Key from the router to your phone setup and you should be fine.
HTC TD2 Wifi issues
Hi
There's some discussion around the web about this problem of encrypted wifi connectivity: a few things to note
1] the TD2 is _very_ sensitive to the power settings applied to the wifi chipset.
The default power saving settings are only likely to work if all other on-board devices - bluetooth, HSDPA, GPS [and maybe even the screen] are either off or in low power mode: the general recommendation seems to be that one adjusts the wifi device power to be "best performance" if one wants to guarantee connections.
2] several people have reported that both the wifi device [card] and the settings for the particular wifi lan [SSID] to which you are attempting to connect should both be configured for "Work" rather than "The Internet".
3] these secured/encrypted connection failures are not about the WiFi access point or router: I've personally tested with several different makes and models of Router and Access Point [3com, Cisco, Enterasys, Netgear, DLink, Belkin etc] - both on my own and on client networks where I have complete control of security, and have also methodically tested every single combination of TD2 setting for WEP and all variants of WPA. In each case my TD2 has failed to make a valid encrypted connection.
The same device will happily connect to "open" unencrypted access points and routers.
Other models of HTC device, such as the Tytyn II and Touch Pro work fine on the same access points and routers: so we can be pretty sure that this is specifically a TD2 issue.
Conversations with HTC's European Tech Support on this issue have not been helpful to date, but they HAVE pushed the issue further up the line, so there's a chance that we'll see a resolution.
Robert

WPA problem

Hi,
I have an HTC Elfin that has no problem connecting to a home network with WEP encryption. But at work, I cannot connect to the network with WPA-TKIP encryption. My phone just tries to connect for a few seconds and then the status of the access point goes back to "available". I've verified the network pass phrase, as it does work with my co-worker's netbook. What is the problem here?
BTW, I've been reading up on this problem and somebody mentioned the fix of turning on/off the wifi (turn on wifi, connect, turn off wifi and then on again), but it doesn't work for me:
http://forum.xda-developers.com/showthread.php?t=327928
dtran707 said:
Hi,
I have an HTC Elfin that has no problem connecting to a home network with WEP encryption. But at work, I cannot connect to the network with WPA-TKIP encryption. My phone just tries to connect for a few seconds and then the status of the access point goes back to "available". I've verified the network pass phrase, as it does work with my co-worker's netbook. What is the problem here?
BTW, I've been reading up on this problem and somebody mentioned the fix of turning on/off the wifi (turn on wifi, connect, turn off wifi and then on again), but it doesn't work for me:
http://forum.xda-developers.com/showthread.php?t=327928
Click to expand...
Click to collapse
Try to set wifi to best performance instead of best battery first.
Often the problem is also caused by a combination of the router (brand/type) and a Windows based device/computer.
Some things you can try to get a working connection with WPA-PSK enabled:
1. Modify the registry:
\HKLM\Comm\EAP\Extension\25\ValidateServerCert=dword:00000000
2. Modify the network settings:
Settings > Connections (tab) > Wi-Fi > Network Adapters (Tab)
and select "NE2000 Compatible Ethernet Driver" (maybe you have to config a static ip-address).
Thanks for the suggestions. I did all those, except for the static IP since our network admin doesn't provide one. It still doesn't work. One thing I'd like to understand is that in my case, why does the WPA-PSK connection work for the standard Windows environment (laptop/netbook, desktop) but not Windows Mobile? What could be the difference?
I donĀ“t know what ROM are you using, but if it is some of 23XXX Builds, disconnect first the Bluetooth and then connect the Wireless... Should work now...
My ROM is MK_872_05 WWE, from chota_shivaji. It uses WM6.5 CE OS 5.2.21872. Thanks for your suggestion. I will try it out on Monday when I get back to work.
I disconnected the Bluetooth connection and tried again to the WPA-PSK encrypted access point at work and it still doesn't work. Just yesterday at a relative's place, I was able to connect to his router with WPA security. I think there's something different with the one at work which does not work with Winmo devices.
at work do u just have a password or a user/password? are u using certificates?
At work I have a guest username and password that I can use to log in for the WIFI access point. The password changes every week, but I confirmed that I used the latest one. But I don't think there's a certificate needed since my co-worker is able to use his home netbook to log in without anything else except the same username and password.

Categories

Resources