Hi,
I'm new to programming the SX56. I'd like to do some simple tapi apps, but I don't know what dll to reference -- coredll.dll? I'm using C# and the compact framework, and am familiar with using P/Invoke. I see a file on my device called coredll-dll.sig - what does it contain? Also, where do I get the coredll.dll (if that is what I should be using) as it does not appear in the Windows folder on my device. What is the TSP - Unimodem?
Thanks for any help.
Helen
I used Tapi with Embedded Visual Tools in plain C. I used tapi.h and linked with tapi.lib. You can't just open a comm port on the device and use AT commands, you have to use Tapi to control the phone.
I found a good book explaining it all and giving examples was "Windows CE Application Programming" by Nick Grattan and Marshall Brian ISBN 0-13-025592-0
I attach a sample of code that uses Tapi to make a phone ring for a fixed number of seconds you should make sense of the steps involved.
Do you have an example for answering TAPI call?
My dialing program is similar to the example. However, I can only make "voice" call work but not the data call. For data call I use "LINEMEDIAMODE_DATAMODEM" instead of "LINEMEDIAMODE_INTERACTIVEVOICE". I never got a ring message from the callee. and the caller side, I got a LINE_DEVSPECIFIC message with 40.
Does anyone have any idea?
- David
Hello guys,
I am trying to make a phone call on my XDA2 using TAPI. I am handling TAPI messages at the seperate thread using lineGetMessage. A lineMakeCall is executed from a non blocking function from application main thread. The following anomaly occures - the function which executes lineMakeCall finishes, but the application stays frozen until the other party answers or drops the call. As a result the user can't cancel the call nor use an application in any other way.
PS: I am using XDA2 device with PPC2003SE ROM preloaded (from this site), the problem appears at the original PPC2003 ROM also.
Any ideas will be appreciated.
Miro
I am looking the way to make two smartphone wm5 can communicate using CSD line. I am planing to fetch data and sending data through the UART/COM port. The question is how would we know which COM due the GSM modem attached to.
Why the sample tstril.exe have error like RIL HANDLE: 00000000, result 80004005 and also the navigated bar cannot move? - I am using Omap Smartpone wm5.
Thanks in advance
You need to sign the application in order to make it work on most of the smartphones running WM 5.0 (RIL API is priviledged API). PocketPCs are not that tight regarding this subject.
Cheers,
Raul
how to sign applica and get free certificate into smartphone
could you explain the better way on to unlock smartphone using free certificate so Application can access the privilage zone?..
Thanks in advance
Only OEM can give such certificate or sign your certificate with one of their root certificate in order for yours to grant you certain priviledges.
I'm afraid that no free or test certificate will help you. RIL is not ment to be used by spare time developers like us...
Cheers,
Raul
Install and sign certificate using third party CA
I already install certificate (.cer) and signing tstril.exe using signtool.exe using our internal certificate. In my smartphone setting->security->certificates->root , shown my CA name registered. But I couldn't launch my tstril.exe. Can you explain why it is happen eventhough my CA name was registered in the setting.
Could you explain me how can I get the OEM certificate? For your information I am using DOPOD TI OMAP850 Model nameopod577W.
Thanks in advance
To answer your question short if you're not an ISV partner or a 3 rd party working on a RIL involving software that has to be added to the ROM then you will probably not see such certficate.
Nevertheless you can check your code functionality on pocket pc side and overall functionality on 2 pocket pc 2003 SE. The RIL hasn't change...
Then you could try to get in touch with HTC if you target this devices and ask them to sign your internal certficate with their root one so that you can sign your app and work with RIL on smartphone platforms.
Cheers,
Raul Tinca
tstril.exe can't work in my dopod and also hp ipaq and sp
I compile the source code using ms 2005 and deploy it into my Hp 2003 and also dopop wm5 both couldn't work
DOPOD
=====
RIL Handle: 0003274, result 00000000
notify: dwCode=0x800002 lpData=2808FE38, cbData=4
notify: dwCode=0x400005 lpData=2808FD40, cbData=32
HP iPAQ
=====
RIL Handle: 00032510, result 00000000
notify dwCode=0x800002 lpData=2007FE8
.....
Well in this case i see that you have valid handle and also receive data in your notify callbacks...
I don't see where the problem is. Let's take it step by step. What are the first steps you want to achieve ?
Raul
could you explain to me more detail on tstril.exe
sorry for late reply..a little bit preoccupied with other things.
Answer to your question, my aim is to get voice data or to send voice data through the handle. How could it be done?
May I know the purpose of this tstril.exe since I am to much ignorant. ow to use the handler and what kind of data I could get from the handler.
Sorry for stupid question...
Thank you in advance.
Hi all,
Voila!
I found the purpose of it. It use to model the caption of event produce by ril. I already manage to run it into my smartphone after I unlocked the phone. Then I found some event occurred. While I am dialing the other phone to the ril phone I saw events triggered. This can be use tho trap like incoming event since the incoming event in smartphone was interfered by the cprog.exe. Event from TAPI is hardly used especially for incoming (ring on) event.
Please tell me, is this what you mean? The handle shown above is to an event that gets triggered at the same time the message buble for incoming call happens. In my use of tapi the event for incoming calls is always generated but I am interested in what you have found because if it is from ril then maybe it is set sooner (hence give me more time to respond). Also if rersetting this would get rid of the message buble it would be useful.
When you say it was interfeared with by cprog.exe what do you mean? Are you saying it is reset or am I misunderstanding the whole thing?
Since the cprog.exe steal the TAPI event so it is difficult to gain the incoming call event from the callback function. What most of the people did is to kill the cprog.exe by the time incoming call event fired by the ril.
After killing the cprog.exe then invoke lineAccept / lineAnwer to connect the call.
Cprog.exe is program runnning at background. This program will hinder the Application to gain full control on the answering part.
I hope I had given you the correct info..
Sorry but can ask more ?
When you say steal the event do you mean that ril triggers an auto reset event that tapi needs to get to know there is a call comming? That would be interesting and I would experiment.
If you mean that the event is the one accessed by LINEINITIALIZEEXPARAMS initialParams ..... initialParams.Handles.hEvent then this dose not seem to be so. I use that event at the same time that cprog.exe uses it to detect a change in the state of the line, it can't be auto reset (unles tapi maintains seperate events for each application using it).
I only kill cprog.exe if I am sure the call is for data. I would love to know how to just make the incoming call buble go away without killing cprog.exe. If I stop that process just after it set the hardware to vibrate it becomes difficult to stop the vibration. If I could leave it running until the call was no longer offering then cprog would cancel its own vibration.
Dears,
I implemented a dialing software using Alex Feinman's .NET Tapi wrapper.
My application was working fine in windows mobile version 4. Now, i'm facing this problem when working on windows mobile 5:
- I call a number from my software on IMATE Jamin
- the call is established and i start talking to the called party
- some one calls me
- my phone rings [normal ring and not call-waiting tone] although i already have a call establised; the incoming call doesn't enter in call-waiting mode.
Any Ideas?
Hi all,
How can I catch the incoming call's phone number (Caller ID) using the MFC?
If I use .NET there is SystemState and the SystemProperty PhoneIncomingCallerNumber. But what is similar with MFC?
Has anybody maybe a code snippet?
Joline
For WindowsMobile 5.0 and above you can read it from the registry.
Don't remember the exact reg key... but look in the SDK for:
SN_PHONEINCOMINGCALLERNUMBER_ROOT
SN_PHONEINCOMINGCALLERNUMBER_PATH
SN_PHONEINCOMINGCALLERNUMBER_VALUE
Best regards
Øystein
Thanks. This works.
I wrote a program which uses notifications and catches an incoming call. To see if that works the program opens a message box if there is an incoming call. But regrettably first I get the notification from the system and AFTER hang up the message box from my program appears.
What can I do that my program catch the call BEFORE all other programs notify this (e.g. to change the ring tone depending on the caller id)?
Joline
IMHO iits not so easy. You must use TAPI library and/or directly Ril.
Where can I find useful information about how to use TAPI and RIL (maybe with examples)?
Joline
For RIL exists only fragmentary informations - good source is forum http://www.teksoftco.com/forum/viewforum.php?f=15.
For TAPI examples search Windows Mobile SDK.
I need the same phone number catching in PHP
Hi ,
I need to generate the popup using PHP while the call is landed in our phone.
how can we do this?
Thanks and Regards,
JayarajMohan.J