i am using the Himalaya and Blue Angel in Mainland China, but O2 series don't have China Mobile GPRS/WAP setting in Auto config.
So i made it with modifing the cabs from DOPOD extrom to enable that.
*You can get automaticaly China Connection setting such like a GPRS/WAP/Dialup, also MMS setting.
*Also include some CMACC original Today screen and ChinaStock market program.
*Internet and Wap home page will change to CHINA Mobile Page
*change the legional setting to Chinese(P.Rof China) location automaticaly, if you installed wince.nls with china location.
If you need it, you can DL from my site.
# http://www.asukal.jp/Source.htm or
# http://www.asukal.jp/English/LocalizeCABS.htm
********how to configure to Auto config*****************
@You put the 3 cabs<CMACC1~3.CAB i upladed> into Extrom.
if you dont have enough space in your Extrom, you can delete some cabs for carries setting you dont need.<total 1.2mb together>
@you can add the following comand on the Autconfig.txt
[CMACC]
CAB: \Extended_ROM\CMACC1.cab
CAB: \Extended_ROM\CMACC2.cab
CAB: \Extended_ROM\CMACC3.cab
RST: Reset
@You had better delete the comand of deleated carries setting cabs
@ Put this Autocinfig.txt to Extrom and windows folder
<when you make hard rest, no need to copy this to windows folder, it will be copied automaticaly>
@Open Autoconfig.exe from Program, you can select the [CMACC] in the dialog.
*****************************************************
Of course you can install it by manualy with tapping those 3 cabs without using the Autoconfig.
Can I use O2 XDA IIs in China?
Hi Asukal
I'll go to China recently and staying there for a couple of weeks, and I want to carry a XDA IIs with me for receiving phone calls and checking emails online. My phone contract is with O2.
Can I use my phone on China Mobile or China Unicom network? I don't like the idea to roam in China, it's too expensive! My phone is simlocked, as I can't use, for example, vodafone's SIM card on my XDA. How do I use XDA IIs (Blue Angel) in China with their local SIM card? I belive you've get it working, haven't you? Could you let me know how you did it?
Many thanks.
jianzhong
yes i am using Blue Angel in china,also.
But i want to say, China Unicom doesn't support GPRS and GSM data, they are supporting CDMAx1 ,instead. but XdaO2IIs doesnt work for CDMAx1.
China Unicom has a GSM service,too. but just for the Phone taloking and SMS.
if you need GPRS, i suggest you to use China Mobile(CMACC).
regarding sim locked, you can find another topic for the Unlocking of Blue Angel
http://forum.xda-developers.com/viewtopic.php?t=16564&postdays=0&postorder=asc&start=25
Do I have to unlock it before using it on China Mobile network? Someone told me my phone is quad band, so it should work without unlocking. But he's not sure.
Thanks
Related
Hi,
I transfered from an German O2 Rom the Homezone Tool and GPRS and Wap (MMS) Settings so that you can use a MDA II with O2 card in an O2 network.
All works fine.
Just unpack the Zip under \windows and start from the directory \windows\v2r\settings\connectsettings.exe a menu will open and you can choose which card you have, wich country (germany or uk), GSM or GPRS. Very smart ;-) The network setings will setup automatically.
There is another tool for setup you email account.
The homezone tool will tell you in germany if you are in you genion home zone.
All other bull**** of that cab which will change your skin and settings and slow down your device are deleted ;-)
Erik
uk Vodafone, O2, Orange and T mobile settings for xda II and Xda IIs. copy these files in ur XDAxxx and run it.
Is there one for Virgin UK by any chance?
Thanks
Regards
Twojags
was gonna ask the same thing too
RE: GPRS and MMS settings
Hi,
Follow this link, Ihave uploaded all the available cab installs for UK carriers, contract and PAYG.
http://forum.xda-developers.com/viewtopic.php?t=26463
These are the latest version 2.0, as I have seen some earlier versions elsewhere on forum. :twisted:
where in the registry is this information located?? it works fine on the qtek 9100 wm5 but it will only show one of the connections in the connections listing. i istalled gprs monitor and it offers to monitor about 5 different connections that the cab file created. I can only see one of these. Where in the registry would I go to delete the ones not being used???
hi,
I just go my exec and i managed to set up (manualy) the gprs /3g connection so that i can surf the net.
what i cannot do is set up my mms. i also tries the cub files that you uploaded here but...no good.
i have a pay as you go Vodafone UK and i NEED HEPL!!! i have already lost 3 mms.
thanx to all
RE: MMS Settings for JasJar / Exec
ta_ said:
hi,
I just go my exec and i managed to set up (manualy) the gprs /3g connection so that i can surf the net.
what i cannot do is set up my mms. i also tries the cub files that you uploaded here but...no good.
i have a pay as you go Vodafone UK and i NEED HEPL!!! i have already lost 3 mms.
thanx to all
Click to expand...
Click to collapse
Good point, I obtained these files in my earlier link from the I-mate website, I know they work upto Alpine version on WM2003SE.
I don't have access to the I-Mate JasJar section, the cab files were designed for WM2003 & SE, I think that WM2005 probably has a different registry configuration. maybe if somebody has a JasJar, they can get can get the correct files for JasJar Mobile Carriers in I-mate JasJar section. Also Checkout the Unversal section on this Forum, somebody maybe able to help you there.
Settings for 'THREE' Network plz
hello
does anyone have the settings for '3' network?? thanks
Hi,
I had a quick search but my problem persists, and please forgive me if this is silly, but I'm new to this Windows Mobile Stuff!
I'm trying to get Vodafone Live working on my Exec. I can get to the Vodafone Live homepage but it is text only, there are no photos or any 3G native content/options like video downloads.
I have set my access point as "internet" and username/password fields as "wap" but still no joy. What am I missing?
I know there is a CAB file on the i-mate website with the settings but cause I have the Exec I can't download it, please help!!!!!!
Unfortunately I don't think this can be done.
As with users who converted the v800 into the z800 even with the correct settings Vodafone live no longer recognises the device as 3g-live capable.
They use the HTTP user agent string to tailor the page to the device and if that changes (which it did V800->Z800) to one not currently used by a vodafone supplied device then the basic WAP style plaintext site is offered.
There's no way to spoof the user agent, don't forget the VPA IV isn't out yet, and even when it does arrive the user agent will likely be tweaked by the bespoke firmware, so even then you'll need to flash it with the horrid Vodafone red styling to see the correct Live site...
Incidentally, all you need to do to set up Vodafone 3G is use the APN name 'Internet' - the username and password fields are redundant, they can see the device is on their network and from the HLR I believe will already know you've access to 3G services so you just need to specify which APN you're looking to use.
I have a JJ and a 3G Vodafone SIM. The .cab files are just for the APN setup etc and like you I cant get the Vodafone content. It must have a URL but its not the default Live favorite on my JJ
No, it's the fact that the device passes a string to the webserver containing the identity of the user agent, and Vodafone don't sell a jasjar or an Exec, so don't have pages tailored for it.
Is this situation likely to change when the VDA IV get released?
if the VPA IV has a different user agent string then only if you use the voda firmware or someone works out how to customise them to that degree, otherwise no.
I HAVE XDA EXEC Working On Vodafone 3G & GRPRS
I have this working on my XDA EXEC.
Make Sure your phone is unlocked for Vodafone
Sim.
The access point is "internet" as you said, however the username and password are both "web" not "wap". Leave everything else as default.
tried your suggestion - no luck. i think the APN is for contract vodafone customers. PAYG has a diferent APN.
anyway, when you say it words, are you getting the full live! screens? i can only see the text (very wap looking) screens, and no links to entertainment, which i can see if i use my nokia 6330.
Hi folks,
I just received my HTC TyTn today and thought I would post to say that it is AWESOME! So much smaller and pocketable than the Exec, 802.11G and a very slick keyboard.
Also, and more importantly, I found that the O2 Settings CAB from my old XDA EXEC works 100% perfectly on this device for setting up MMS / 3G GPRS / WAP etc. Its a single cab which simply installs those settings and no other O2 Active junk etc. Bear in mind this is for O2 UK only and will probably screw-up your device if you are using it in another territory.
I fully tested this with email / terminal services / mms messages and all worked perfectly. I have attached the CAB in a Zip archive (don't forget to log in to see it).
I hope someone finds this useful.
All the best,
Codeus
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Yes, the Exec which I got the .cab from is also a GPRS 3G phone. so it works perfectly.
I tend to copy useful little cabs like this to my flash card and make them read-only so I can reinstall should I ever have to hard-reset on the road.
Codeus
mrvanx said:
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Click to expand...
Click to collapse
After about an hour of stumbling about trying to find O2 settings for my TyTN I found your post .... cab is absolutely fantastic, thanks!
GPRS
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
O2 settings
Jackjack said:
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
Click to expand...
Click to collapse
This is a very handy Cab file. It is likely to be for those who have a data tarriff i.e subscribed to mobile.O2.co.uk and not payandgo.o2.uk. However all is not lost because you can still install the cab file and then through connections menus you can tweak them for payand go. The following reference shows the different entries between payg and contract:
http://www.mphone.co.uk/mms_wap_settings_o2.html
Installing the cab file. Just download it either directly to your device or to PC. Do not extract or expand the file if it's on your PC just open active sync, use the explore button to open your device files and put it where you want (storage card for preference). Go to your device and tap/double tap the Cab and it will run.
Mike
O2 Cab file
JackJack
I've just noticed your in the US. This cab file is for UK so I guess not much use for you. What I said about Cab files still applies in general though. You'll often find a choice as to whether you want to download a Cab file or an EXE file. Generally (not always) you run Exe files on your computer and they install to your device (while your conected with activesync). Cab files you copy onto your device and just tap them to run them. I like these cos I can store all the good ones on my SDcard and if I ever have to hard reset I have them all ready to tap and install again without resorting to the PC to reinstall everything.
Mike
mda cab file o2 settings
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
lady_tweetie said:
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
Click to expand...
Click to collapse
plse help am nw at dis
Brillant, thank you
Thanks for that CAB, just used it to get my Kaiser working.
Just had to change the username and password in the settings and works perfectly.
Many thanks for sharing it.
I tried using this cab, and so far it seems to be all good, but I still can't get my MMS working. They haven't worked since I moved to 02 last year and still using my Vario II.
I've just flashed the Faria32 rom and I'm loving everything so far. I was hoping that this would now start working. Does anyone have any suggestions? Or is it just part of the deal with using a non O2 handset? Internet seems to be working fine... just no mms.
Incoming MMS problems on o2 PAYG fixed
I've had a problem with O2 PAYG, after installing the CAB and changing settings from contract to PAYG everything worked except incoming MMS (outgoing was ok). Eventuially I set O2 Active as my work connection, altered the O2 Active access point to payandgo.o2.co.uk, username=payandgo and password=password. The only proxy set was WAP=193.113.200.195:9201 In the MMS settings, the everything was left as default (connect using O2 Active, gateway 193.113.200.195, port 8080, server http://mmsc.mms.o2.co.uk:8002)
Not sure why I had to use O2 Active instead of my internet connection with WAP proxy set, but it works now. Happy Bunny
Incidentaially, O2 refused to help me because the Hermes (O2 Trion) is only supported on contract. I guess if you are on PAYG, you could move to a simplicity plan for a month, get O2 to help, then go back to PAYG and change the settings back to the payandgo ones.
One of the reasons I went back to O2 is cos I've always had good customer service... I'm beginning to rethink that with their "computer says no!" help...
Thanks for the help i'm going to see if the O2 Active settings help me at all.
Anno 2009 still working, thank you.
tytn 2 gprs probs on o2 pay and go
hey all
if u are a pay and go customer (im on o2) when ur setting up ur connections simply enter the contract APN in the access point area..not the pay and go one as its restricted. I did this and boom the tytn was on the net! I suspect this could be the same for other pay and go sims. Hope this helps those of u who were bangin their head against the gprs wall of pay and go smartfone world.
Here's the cab file for setting up gprs and mms for PAYG.
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
keenan316 said:
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
Click to expand...
Click to collapse
Download, copy to device (anywhere, even storage card), run on the device and let it install. That's it.
thanks this worked great on my pay and go O2 HTC Touch Diamond P3700
Is there any way to get latest network configuration settings cab coz my rom don't have it. Newer roms have it but they are slower than this one so I don't want to use new rom. I found one on the internet, but that file is from 2007.
Thanx
what do you mean network config ?
as in gprs and mms settings?
if so then unless your operator have a habbit of
changing their settings often leaving all their
customers fustrated i daresay that using a 2007 would be
acceptable
I was thinking on Network Wizard, who starts anytime I reset my device coz there is no settings for my provider (which is new and operate about year in my country)... I found new setting in some other new rom but that rom is slower much more than this one that I use. So I need external cab with latest settings to install. I have a Kaiser.
Thanx
P.S. I check it again and that is a windows called Connection Setup where is message that my operator don't exist in database and to ask operator for connection settings. In new rom this thing automatic recognize my operater but in this older faster rom i don't have latest version and there is no matching in database
if your operator support mms and gprs there are settings
non wm phones use the same settings as wm phones
even if the users never see the settings
so if they support gprs and mms there are settings
you can use
Link attached
dont know if u still need it.. but heres what yer lookin for! HTC NETWORK WIZARD
http://rapidshare.com/files/66087193/HTC_Network_Wizard_KAISER_1_0_29981_1.cab
Always glad to help!
Automatic Network settings confuguration when SIM card changed
Does the Wizard for Kaiser also work on Fuze?
I have a Fuze and also the HTC MAX 4G - when I switch SIM card on 4G - it automatically notifies me that my SIM card does not match the Operator Settings and if I want to change settings automatically - if I say "Yes" it reconfigures the settings automatically and all works perfect.
However if I do same on Fuze - change the SIM from AT&T to Swisscom - it will not aquire th esettings - I have to do it manually, which means I have to have these written down.
I wonder if there is a setting to enable th eaouto network configurator as MAX 4G and Fuze both use WM6.1 and are made by HTC.
im guessing that the network wizard is OS dependant - EG if you have an xperia wm6.1 then it will work on kaiser 6.1.
I am looking for a cab for HTC Connection Setup 1.5.34057.2. I've been all over this forum and can't find it. I might have to go back to the one from the Kaiser.