Can anyone get me the Touch Flo software of the ELF for the Hermes.
Is it Hardware resitricted. I don't think so. Any Suggestions???
Someone must be working on it I am sure. Really a nice software. If we get it on the Hermes than Iphone is gone for good.
This has been asked before and there are a fair few threads on it. An example would be
http://forum.xda-developers.com/showthread.php?t=316768
in fact....
TouchFlo Finally Working!!!! on Hermes
Gonna have to play with that later....
Cavey.co.uk said:
This has been asked before and there are a fair few threads on it. An example would be
http://forum.xda-developers.com/showthread.php?t=316768
in fact....
TouchFlo Finally Working!!!! on Hermes
Gonna have to play with that later....
Click to expand...
Click to collapse
Thanks CAVEY.
Are you sure it is working with finger touch like the iphone or with the button touch. Anyone who has tested it please reply how it works.
Does it hang the phone or else.
hsanghavi said:
Thanks CAVEY.
Are you sure it is working with finger touch like the iphone or with the button touch. Anyone who has tested it please reply how it works.
Does it hang the phone or else.
Click to expand...
Click to collapse
ok,it is BUTTONFLO,not the finger touch,i try it before.
Anyone has info of working TOUCHFLO with fingers on hermes.
There's a Hermes thread on this...
http://forum.xda-developers.com/showthread.php?t=327846
But still the final version is not yet out. Awaiting the final version to work better and simple to install. At the moment there is too much to configure to make it work well.
WAITING .....
Hi there,
been reading about new igo thats comming out and by the looks of things they are now using a 3d interface.
just wondering if our humble wizards will be able to handle this. Has anyone here beta tested or tried out the demo.
Thanks
Erm, I haven't tried it on my wizard and it wasn't dog slow and popped a few out of memory messages.
I hope you see what Im saying here!
A shame because i would really like to upgrade to this.
On my old Atom life I got a Flashlit Application to switch the camera light on wiothout openinng the camera. Was very usefull, so is there anything like this for the X1?
http://forum.xda-developers.com/showthread.php?t=422367
Works like a charm
Thankx a lot, works like it should!!!
thanks too!
Thanks, [email protected] ^^
Here's the first Beta release of my 6.5 23001 ROM it's a beta so don't expect it to be perfect,
I'd like to say Thanks to all the people that have given there tools and shared there work on this site like Bepe,Itsme,Explode,SunDream,Da_G and Many more how's names I'v missed
Explode,Sundream,Helmi_C and many more for there work on the BA Device,
Explode for his help over the last 2 year's or so, Thanks mate
Thanks Guy's you all Rock
If you change the descktop theme do a soft reset and then your dialer will match your desktop
The ExtROM from Explode's ROM should work fine with this ROM,
I got 1 of my ba's back from repair shop it lasted a week and the touch screen has stopped working so I'v not bean able to test this 100% but it seems good I'v built this without the use of touch screen
Build UpDate
Second build v1.01
The full port is finnished now and the async problem is Fixed now, (Thanks explode)
Download Beta v1.01_Async_Fixed Rom
http://www.4shared.com/file/117888597/9a698701/Swampy395_BA_23001_Upgradev1_01.html
Download Kitchen
http://www.4shared.com/file/146482352/b4d365ff/Swampy395_BA_Kitchen_WM65_23001.html
enjoy best regards
swampy395
its been a long time ago since a new release
Good one swampy i will try it!
How much of storage and how much for RAM?
thanks to bring to us the last build of wm6.5 for BA!
swampy395 said:
Here's the first Beta release of my 6.5 23001 ROM it's a beta so don't expect it to be perfect,
only got 5 minutes so this will be brief, will post more info later
All explodes cab should work fine with this ROM, I will make some tomoro
I got 1 of my ba's back from repair shop it lasted a week and the touch screen has stopped working so I'v not bean able to test this 100% but it seems good I'v built this without the use of touch screen
Download Beta v1 Rom
http://www.4shared.com/file/115980428/7197c30f/Swampy395_BA_23001_Upgrade.html
I'll check in later to see your thoughts on this rom if i'm sober
enjoy best regards
swampy395
Click to expand...
Click to collapse
Thank you very much, but I still continue to use the WM6.1
thanks swampy395
good work,we will try it quickly.
is there extended rom?
thnx again
Thank you for your rock. I used your WM6.5 ROM many times. On this ROM can I use the STK as on WM2003. I still want to used STK function that I came back to WM2003. Anyhow, I like you WM6.5 to much.
Thanks alot
homam_france said:
thanks swampy395
good work,we will try it quickly.
is there extended rom?
thnx again
Click to expand...
Click to collapse
garfield007 said:
Thank you for your rock. I used your WM6.5 ROM many times. On this ROM can I use the STK as on WM2003. I still want to used STK function that I came back to WM2003. Anyhow, I like you WM6.5 to much.
Thanks alot
Click to expand...
Click to collapse
Hi guys
homam_france
ExtROM I'v not had time to do one yet mate use Explode's ExtROM and do in the week, But it's dam HARD with no touch screen so may 3-4 days waiting to get my other BA back then i can send this one back under warranty
garfield007
There's no STK that works with any BA rom since 2003 not for WM5 or WM6.xx
sorry mate if you need STK then it's back to 2003 for my friend
glad you guys like it as i said in post 1, I have no touch screen at the momment, god just try useing your BA without touching the screen It's a pain try it
regards
swampy395
Thank you.....
Hi Swampy,
At last, after so long we finally have a new ROM for the BlueAngel. Everything was silent so long, which was pretty sad. Felt like the BlueAngel is losing its fanaticism. Its making me, and I am sure many others very happy to finally see a new ROM for our BA.
Thank you for your efforts.
Francis
hi swampy
very good rom, every thing is good,it is fast stable no errors and no hangs,
but there is one problem,until now no body solve this issue of this problem,this problem that when the (telephone off + locked) when we recieve a call it will be to late then ring,i test it about more than 8 seconds then the device wake up and response.
every thing is good like bluetooth wifi gps gprs and so faaaaaaasssssst.
untill now every thing is good.
thnx again
good work Thanks alot
Sync dont work
Hi Swampy, Congratulation, but i think we have the same probem with your version and xplode 7.
homam_france said:
hi swampy
very good rom, every thing is good,it is fast stable no errors and no hangs,
but there is one problem,until now no body solve this issue of this problem,this problem that when the (telephone off + locked) when we recieve a call it will be to late then ring,i test it about more than 8 seconds then the device wake up and response.
every thing is good like bluetooth wifi gps gprs and so faaaaaaasssssst.
untill now every thing is good.
thnx again
Click to expand...
Click to collapse
Hi mate
Thanks for your report I'v had this problem with all builds since 21232
with touch diamond and charmer it seems to be a common fault with older devices when i get a fully working BA i'll try some 6.1 phone files from older SYS could be theres some diff in new radio's to old
thanks again
nice to here i did so well without a touch screen
regards
swampy395
sync
bskalli said:
Hi Swampy, Congratulation, but i think we have the same probem with your version and xplode 7.
Click to expand...
Click to collapse
Hi mate i'v not had any probs syncing I'm useing MS_XP are you on vista or mac? don't know much about vista but there is a page on this site somewere that's all about vista problems maybe it could help
But do try reflashing the rom
There is something about different settings for vista I'll see what i can find about it
regards
swampy395
Sync
My Standart:
1. Step : new Rom only with XP
2. Step : Sync with Vista.
Since Xplode 7 Step 2 dont work
HI swampy thanx for ur good work BUT i m facing a lot of battery drain although i hv not installed ny application yet and also closed the infrared, power settings and backlight at lowest time and level.
krishan2207 said:
HI swampy thanx for ur good work BUT i m facing a lot of battery drain although i hv not installed ny application yet and also closed the infrared, power settings and backlight at lowest time and level.
Click to expand...
Click to collapse
Hi mate I will check it out, Can you try charging your battery in the creadle and see if it lasts any longer that way cheers
regards
swampy395
bskalli said:
My Standart:
1. Step : new Rom only with XP
2. Step : Sync with Vista.
Since Xplode 7 Step 2 dont work
Click to expand...
Click to collapse
Hi mate so can you sync with XP?
regards
swampy395
swampy395 said:
Hi mate I will check it out, Can you try charging your battery in the creadle and see if it lasts any longer that way cheers
regards
swampy395
Click to expand...
Click to collapse
i got that titanium plugin is causing the battery drain as i disable it the battery lasts long.
krishan2207 said:
i got that titanium plugin is causing the battery drain as i disable it the battery lasts long.
Click to expand...
Click to collapse
Cheers mate nice to know I'v seen some can't get the plugin to work with 23001 builds
EDIT: sorry do you mean windows default/Chome or Weather plugin?
P.S. 9 1/2 hrs in standby and my battery is at 99%
regards
swampy395
hi
by the way,weather plug-in didnot works on this build.
is there a solution for weather plug-in?
i informed mnemonique but he didnot answer.
may be u have an answer for this case.
thnx
GOOD WORK
i'v tested your new rom in my BA with IGO8.3 and spb mobile shel 3.1 and more programs...it's so good and so fast the b.t. work fast and i tested wi-fi a lttle but work well
wery good job!!
Chaps,
Have searched in the Hermes forum but no joy. There is a thread in the Leo forums but it doesn't tell me what I am looking for.
Has anyone successfully used this keyboard on a Hermes? If yes how did you get it to work?
I simply get a blank screen when I tap into it.
Your comments appreciated.
Thanks
WB
Swype link: http://www.swypeinc.com/product.html
Is it WM6.5 only?
Mike
Mike,
I don't know is the short answer. I am using WM6.1 and simply assumed that this would work in a 6.xx rom.
I will hop onto their website to see if there is any substance in your theory. Would be surprised if there is as they would be doing themselves out of a significant cut of the market. After all 6.5 only got officially released a few weeks ago!
Thanks for the input though.
Anybody else?
WB
PS: Hmm, you might be right Mike. Their forum seems to suggest that it only works in 6.5. Great keyboard but having to load up 6.5 to run it is not an attractive option.
Pretty loath to destabilise my rock solid stable device. Will have to look for an alternative that is similar in concept.
WB
I've got it working no problems on mine. I'm running CRC's 13.4, which is a WM6.1 rom. I am using the QVGA cab from here.
It seems totally stable, and is by far the best keyboard I have come across.
Jez,
Thanks a bunch. I managed to find that thread about an hour ago but appreciate the input.
The qvga version works like a charm! Can't believe how quick one can be using this.
Word of warning; will only install onto main memory so make sure you have some space to do so.
Cheers
WB
Now you've got that solved, I think I'll try it as well
Mike
Let us know what you think. I love it as you can use it either as a traditional tap keyboard, a slider or both!
Only small issue for me is I make mistakes when I am tired as I can't always remember where the letters are on the querty keyboard as I do the slide (lol).
This, even though I have been using querty for donkey years
Enjoy.
WB
The link for the cab has gone
It does look a very good app and I hope they bring it out soon so I can try it.
Look for an app called Shape writer...
ultramag69 said:
Look for an app called Shape writer...
Click to expand...
Click to collapse
Thank you for the link
I think I will get some info on this as it looks very good.