Database Users

Change Installation Directory

Hi,
i want to install the programs to a directory on the mmc card.
But if i do so, it installs in the root.
Now, thats not looking nice, and its hard to find anything there then.
I want create a directory for games and programms on the card.
How can i do that?
I can only choose between, Memory Card, Storage and Main Memory.
And that sucks!

Maybe u can user WinCE CAB Manager and edit the *.cab installation directory to any directory u prefer.

You can use the freeware CabInstall and install program directly from the SD.

Yes, but on the on hand this would be a lot of work, changing every single files directory in the cab and on the other hand it wouldn´t work out with Progs, that have an exe intallation, like the game AoE.
Thos Progs, first install on the PC and then on the PPC, and there are no editable CABs at all.
I thougt about changing the installation interface inactive sync , but i´m not a coder.
But maybe, there is somebody out there, who had the same idea like me and realised it already.

The Best solution ever: have a look at the attached files, open the TXT file first (the instructions)
You will not need any additional Software (except e Regestry editor like PHM Regedit), just follow the instructions and use the attached files.
Workes great I am having this now for 4 months!

if you install the programmes to the SD/MMC card, and they make their own folder, put the SD/MM card into a card reader on the pc and select the entire folder as hidden. this means that the programme still works, but does not show up when you explore the card. this does not work if u are using your phone as a card reader.

Sorry DerliebeWolf, The BEST solution is the follow (Tested on WM2003Se):
- Download a registry editor 4 Ur PPC
- Open AskDir_ON.reg with the program
- Reset your PPC
manually:
- Go to \HKLM\SOFTWARE\Apps\Microsoft Application Installer\fAskDest
- Change DWORD value (dec) from 0 to 1
- Reset your PPC
If you install a cab file or an exe file from the pc (that copy the cab into your ppc and then execute it), Windows Mobile will ask you in wich folder you want to install the sw.
Note that you can have problems with some applications (because they're not installed in their own directory)

Check out Nonentity's File System Tweak http://forum.xda-developers.com/vie...order=asc&highlight=file+system+tweak&start=0

Cabinstaller is the best and easy software i could recommend for this. Run the cab installer software once and set it to run for all installations, the whenever u try to install a cab file, it will prompt you for the path of installation. It also has an option to disable deleting of cab file after installation. Do you want anything more than this? and to the max, it is free ware! Its easy to get, if you can't find,I have it in my site' software section. www.cartystudios.com

oh yes, i've forget that cabinstall associes .cab files to it (and then, when you execute an exe from the pc, in the ppc will be opened always with cabinstall in auto)
They're the 2 Best Solutions

Autoinstall a set of CABs (possible?)

Hi, i have updated my device to the mr. clean image.
Now i have to install all software. So i create a folder on my storage card with all necessary cab files.
Is there a possibility to have them all be installed with one click? For example to create a Batch to install them one after another?
Hope not to ask silly questions.
TheGulOfDedra

try this;
example;
This '\Storage Card\2577\autorun.exe' is an official M$ way of autolaunching programs from SD card, well described in MSDN...
If you put calc.exe into this folder and will rename it to autorun.exe, it will be automatically launched upon inserting this SD card in. So your calculator will pop up...
make a folder in the root of the sd card called [2577] put the cab files into the folder ,reboot the device .it should install,
alternative; use the autorun from the extended-rom to launch the files.you my need to do some editing intiothe config file.

Thanks - how can i "see" the extended rom? Editing a config file is no problem for me.

TheGulOfDedra said:
Thanks - how can i "see" the extended rom? Editing a config file is no problem for me.
Click to expand...
Click to collapse
use "TOTALCOMANDER"
download ,install then open the prog ,write the folowing in totalcomander,[extended_rom] now you should see the contents of the extendedrom,you can use totalcomander to copy any file to any location.
download from here; http://www.ghisler.com/ce.htm

thank you very much to all

Problem is...all your CABS will be installed to their default installation directory (mostly Main Storage).
What I would like to know is how to make all CABS install to the Storage Card or a directory specified in the config.text?

Deleting cab files in windows folder???

After installing a program f.ex. Pocket Informant - there is a 1 MB cab file in the windows folder. Can that be deleted - and then saving the storage space?

jenslilholt said:
After installing a program f.ex. Pocket Informant - there is a 1 MB cab file in the windows folder. Can that be deleted - and then saving the storage space?
Click to expand...
Click to collapse
yes. you might want to leave a copy on your computer for ease of reinstallation.
--M

I don't mean on my PC..... but on my PPC. When I install a progtram on my PPC - is the cap file in the windows folder needed?
The reason is, that I discovered, that after installing - and then deinstalling some programs - the cap file where still in the windows folder of the PPC.
My question is therefore: is the cap file used for the running program? And if so, I guess the deinstalling have been poor. Probably common known - I just have no idea...

You can delete the cab file. You can also move it to a storage card in the event that you need to reinstall the program later. But you do not have to keep it on your device.

Moving Mail and Attachments to Storage Card

Hi
The attached file makes necessary registry changes to move Mail and Atachement storage to SD Card.
There have been a few cab installers available to perform a registry change, enabling storage of both Mail as well as Attachments on the Storage Card. However these solutions have the "Storage Card" hard coded as destination, which means if more than one partitions exist on Storage Card, manual changes would be required to the registry to use another partition. Another way is to have separate cabs created for each partition. Another problem is that on some devices the Storage Card is named as "Memory Card" (I've seen this on on my O2 Atom Exec), hence again manual registry changes are required or a custom cab needs to be created for these devices.
The attached cab installer tries to overcome above mentioned limitations. During the installation "Device" and all the available Storage Card Partitions are listed and user is asked to select the destination. The registry changes are performed accordingly to enable Mail and Attachment storage on the selected partition or Device.
The cab creates following registry entries under "HKLM\System\Inbox\Settings" :
- PropertyPath = <destination>\Mail
- AttachPath = <destination>\Mail\Attachment
where <destination> is the option selected as destination while installing the cab.
Uninstalling the application from Add/Remove programs should restore the old values (if any) of the above registry keys.
The cab file has been tested to be working fine on WM6.1 and should work fine on WM6 also. WM5 requires different registry entries and the attached cab does not work for WM5.
Please let me know if anyone find this useful

I just installed this on my Verizon XV6900 with Windows Mobile 6.1. All I can say is, Awesome! Thanks for this. I love the automation of it. Seamless. And providing the uninstall is also nice. Just installed, powered off, then back on, and all is well. Do you think you might also be interested in doing the same thing for Internet explorer temp files, favs, cookies. Maybe make the folder it creates be called "Internet". I had a file before for my Moto Q9m that made a bunch of things store on my storage card and I loved it. It really kept my phone running very fast, as it didn't use up main storage. With my old phone, I had 5000+ emails, alot of favs and such. I loved the fact that I could wipe my phone out any time, and then re-import the reg changes to point back to the storage card for all my stuff, and I was right back up and ready to go with all my files.
Thanks Again!

Programs from memory card not appearing in menu.

Hi, I have an 838pro with wm6 running on it. I have a lot of programs on the memory card that dont appear in the 'programs' bit of my pda. I was wondering if thats standard, and if so: can i change that?
Also is their any hack / program that will enable me to use the front (video calling) camera as just a usual camera?
Thanks alot, have a great day.

First of all you are posting at the wrong thread. You have a Dopod 838 pro (Hermes) & you are posting at Wizard forums.
For the programs at your storage card you find with your file browser the executable that you want to ''go'' to your programs folder, press copy & then go to My Device - Windows - Start Menu - Programs & then select paste as sortcut. You must do that to every program that you want.
For your front camera I don't know because my Wizard don't have one .-

copying the exe is a bad idea
if the exe depend on dlls or other files located in the same
dir it will not work as exe are usually much bigger then shortcuts
you make shortcuts to the program using
total commander
and if you installed the programs on the sd card before you
changed rom or changed device or something like that
they will never auto showup
much like if you installed programs on an external harddisk for your
computer and connected it to another computer new or a friends pc
they would also not show up
apart from that if they depend on settings added to the reg of the pda or computer
for that matter and you changed pda/rom or computer
you will have to reinstall them
but then not all programs add shortcuts to programs depend on how
the cab file makers made the install

Rudegar said:
copying the exe is a bad idea
if the exe depend on dlls or other files located in the same
dir it will not work as exe are usually much bigger then shortcuts
you make shortcuts to the program using
total commander
...
Click to expand...
Click to collapse
I agree that's why I have write:
samxein said:
...
For the programs at your storage card you find with your file browser the executable that you want to ''go'' to your programs folder, press copy & then go to My Device - Windows - Start Menu - Programs & then select paste as shortcut.
...
Click to expand...
Click to collapse