Related
Is someone is capable to developpe for 2020i (PH10C) Alpine possibility to ;
Unlock Extended ROM
Unlock Storage
Dump And EDIT ROM ??
Thk's for reply
the disk-on-chip unlock password is ' eNiPlA' ( note that it starts with 2 spaces !! )
willem
WOAH, a start way
Thank's, but what and where i use it ?
QTEK 2020i, ROM 1.11.02 FRE
Upgrade on 2020i (Alpine)
Does anyone know how to change roms on the Alpine (XDA2i)? I get a country error code. Is there an upgrade exe without ID check?
Thanks
There is a new (yet unpublished version) of ER2003Edit. It uses Itsme's Perl script for decoding/encoding. This script does not calculate checksums correctly, so you can edit the ROM, but the AlUpgradeUT.exe fails with checksum error.
Anyone able to fix the script...?
Today we can upgrade 2020i with rom from different contry.
use a tools from xda_dev "MaUpgradeUt_noID.exe" in place of "AlUpgradeUt.exe". It's work fine, i used it to change my ExtendRom from DANGAARD to BRIGHPOINT
MaUpgradeUt_noID.exe
where can I download it ??
QTEK 2020i ROM upgrade info. But where is the original ROM?
Hi, apoujade. Thank you for the info.
I understand that I have to put "MaUpgradeUt_noID.exe" in place of "AlUpgradeUt.exe" in the directory where the temp files are extracted and continue. I understand that I can change my ROM to O2 by doing so.
But for any reason if this fails I may need the original QTEK ROM.
Is there anyone who has the address to download the original ROM for QTEK 2020i?
But Please do not give simple site address because they all ask IMEI numbers and check the number with the ones they sold. Please give the address of the file to download like this: http://www.qtek.nu/files/RUU172752WWE.zip
this is the address of the ROM for QTEK 2020. I need the same for 2020i
It will be very helpful. Regards.
mrtdgn have a look at koldun's reply http://forum.xda-developers.com/viewtopic.php?t=23754&highlight=. The first zip file is the default I had on my 2020i.
Hope this helps you.
not sure....
what is the disk on chip and how do i unlock it i see that itsme has found the password (for that i am greatful i am unsure what it does)
thanks
original QTEK 2020i ROM
Thanks epicus. I downloaded the file. It will make me comfortable before I try anything; I know that the tools work but just in case if I make a mistake
After the hardwork of "real" developers, there is no more SIM lock or restriction on the unit's brand and ROM versions.
Life is better for fans of XDA family. 8)
Qtek 2020i
Hi All
I hvan an Qtek 2020i Which is simlocket to Telia. how do I get it unlocked so that i can use a nother sim card in it
Hello everyone.
This is my first post in this forum, but I have been reading it for a while. Tomorrow I’m going to be a proud owner of a Qtek S110. If I’m right the only difference between s100 and s110 is the 128MB of RAM. But does anybody know if the ROM’s for S100 can be used with S110 and will the BigStorage hack work on S110??
Regards
PK
I think there aren´t any user here, that have already this device.
Maybe you could make a dump of the ROM and Upload it to the ftp.
Then there will be a possibility to take a look if there are any differences, and if the BigStorage trick does work also....
Stefan
OK!
I shall do an SD dump when I get the device and upload to the FTP and hopefully someone can take at look at it.
Regards
PK
Any news about BigStorage Hack and Qtek S110???
As far as i remember, someone already posted information about his device with 128 MB RAM and the big storage. There are shops in the web which do the memory upgrade for quite some time already. I don't think you'd have problems with a normal Magician Rom, assuming that the hardware isn't different other than having more RAM.
When changing from CHT to English I made a mistake and dumped the Charmer Rom Update... (by mistake.. wrong identification...)as a result the Extended rom stays the Chrmer and I can't get rid of it. I could not find a way to modify the extended rom can only "see" , can't modify it.
Could one of the 818pro wwe owners dump his complete rom (sd version) and upload it to the site?, Is there already a "shipped rom" version?
There is a copy in xda-dev ftp site at
/Uploads/818Pro_WWEOS/
Is your unit a Dopod? Anyway, I've tried to FLASH my MDA Compact 2 with a Dopod ROM and my camera stops working. Just take note of that.
There seems to a way to unlock (replace/modify) the Ext Rom.
Read here
http://forum.xda-developers.com/viewtopic.php?t=37386&postdays=0&postorder=asc&start=75
Dopod 818 pro and MDA compact II
Thanks hanmin for your prompt reply...
1. The MDA compact II is not the same H/W as the 818 pro. Your camera did not work becase the 818 pro has a defrent Camera 2.0 MPixels while the Compact II is only 1.3MPixels.
2. I tried all methods mentioned here and NADA... I can unhide the Extended Rom but I can't modify/get rid of the exsiting content (which has been originated by mistake when I RRUed it with the Charmer (MDA Compact II) files.
3. The 818pro on the FTP is missing the Extended rom NK/NBA files.. and I can't over write the rom because it is locked for writing. A shipping rom could help, because probably I can use the rom editing tools to set it up.
I wish there is a way to write back the extended rom files into the machine with the awizard utility (it is great.. but this function is mssing for my case...).
Still looking for a flash rom to clean my "dirty" T-mobile charmer extended rom on my 818 Pro..
Right now I stop the Extended rom update and built an ExtRom on my SD card using the files that are in the FTP.. however for future sake and for the simplisity of Hard Reset in the future I would like to have a complete Image of the Extended Rom.
ftp.clubimate.com
yep, thanks
already upgraded to Arabic rom
wardy said:
ftp.clubimate.com
Click to expand...
Click to collapse
Wardy have u got a dopod 818 pro or jammin?....As i have a jammin and was thinking of installing the dopod rom.....Have u tried both roms?
If so which do you think is the better of the 2?
Thanks
Can I use the file to upgrade my Dopod 818 Pro? Has anyone tried it?
linux2001 said:
Can I use the file to upgrade my Dopod 818 Pro? Has anyone tried it?
Click to expand...
Click to collapse
Yes, you can do that but your 818Pro will have European/Australian GSM settings instead of Asian. You need to flash the DopodAsia Extended_rom if you want those Asian settings.
I am in Australia currently, and bought my Dopod in Singapore. I am currently facing the Sleep-To-Death (STD) problem on my Dopod so I am wondering if I should try the imate ROM...
Imate Jamin rom on Dopod 818-Pro (Hong-Kong)
I tried flashing my 818-pro with the Jamin Rom... stoped after 95% (assuming when validating the device ID) and informed that the rom is not for my device... left the 818-pro dead!. My only way to recover was, to flash with MDA compact rom to bring it live again and than load through awizard the 818-pro WWE version from this FTP.
Conclusions:
1. Imate decided to disable an incorrect device???? (perhaps un-intentially).. therefore avoid using the Imate RRU utility.
2. flash NBA through the Awizard utility.
Question how to separate the Extended Rom from the NK.NBA provided ???
Re: Imate Jamin rom on Dopod 818-Pro (Hong-Kong)
Dubi said:
1. Imate decided to disable an incorrect device???? (perhaps un-intentially).. therefore avoid using the Imate RRU utility.
Click to expand...
Click to collapse
I don't think so. I have successfully flashed my Dopod 818Pro with Imate JAMin. However, I flashed it back to DopodAsia ROM because it's not a newer ROM.
linux2001 said:
I am in Australia currently, and bought my Dopod in Singapore. I am currently facing the Sleep-To-Death (STD) problem on my Dopod so I am wondering if I should try the imate ROM...
Click to expand...
Click to collapse
If you still can get your Dopod to the Bootloader mode, you may try to flash it with this Imate ROM. Better than STD I guess. Good luck!
(To get it to Bootloader, press Camera button and reset the unit. Holding the camera button until you see four color bars. Insert USB connector and run the ROM file.)
Khuanchai said:
If you still can get your Dopod to the Bootloader mode, you may try to flash it with this Imate ROM. Better than STD I guess. Good luck!
(To get it to Bootloader, press Camera button and reset the unit. Holding the camera button until you see four color bars. Insert USB connector and run the ROM file.)
Click to expand...
Click to collapse
Thanks for the advice Khuanchai, I might want to try this out, but am worried about getting a failed flash like in Dubi's case. It will be difficult for me to send my 818Pro for repair as there are no Dopod service centres here in Australia.
Do I need to take special precautions before running the update, such as applying the unlock CID option using the aWizard tool?
linux2001 said:
Thanks for the advice Khuanchai, I might want to try this out, but am worried about getting a failed flash like in Dubi's case. It will be difficult for me to send my 818Pro for repair as there are no Dopod service centres here in Australia.
Do I need to take special precautions before running the update, such as applying the unlock CID option using the aWizard tool?
Click to expand...
Click to collapse
Not sure you need to unlock CID in order to flash a new ROM only but it's a must if you want to backup your Dopod ROM. I have done this to backup my Dopod ROM that can be flashed back whenever I want.
I think Dubi has failed because of incomplete downloaded file.
There is a very good information for flashing Dopod 818Pro with Imate ROM at PDAMobiz.com:
http://www.pdamobiz.com/show_news.asp?NewsID=52433&PN=1
Unfortunately, this is in Thai but it's easy to follow if you have some experience on flashing ROM.
Failed to flash Imate rom on Dopod 818
Thanks for the remarks.... however... My phone has been originally Chinese and I loaded the 818pro rom wwe avaiable here on the FTP> however by mistake I flashed it before with an MDA compac rom which installed a wierd Extended Rom which I can't get rid of, unleass I have a good "ship" version. Tried few time to flash the Imate Jamin rom and it quited after 95%. I am currently using the Imate version.. dated Jan 9th. which I was able to finalize with lot's of tricks such as complete the RRU by lading just a radio version.... I think (just feeling) that the Dopod818 pro wwe is better.... however in order to resolve my complete issues and to let you know if it fialed (95%) becuase of Imate or becasue of a strange Extendedrom that I have I need to have access to a "SHIP" WWE Asia version. Placed a request here on the Board but so far no one Uploaded it... Yet.
I can ensure you that My phone is CID unlocked etc. etc.... Tried some RRUs but None could identify the Imate nk.nba rom., while the original RRU of imate failes on 95%.. keep anouncing that the rom is not for me???!!!
Please if one of you have access to the Asia Dopod site please upload a complete "ship" version (English please).
Re: Failed to flash Imate rom on Dopod 818
Dubi said:
I need to have access to a "SHIP" WWE Asia version. Placed a request here on the Board but so far no one Uploaded it... Yet.
I can ensure you that My phone is CID unlocked etc. etc.... Tried some RRUs but None could identify the Imate nk.nba rom., while the original RRU of imate failes on 95%.. keep anouncing that the rom is not for me???!!!
Please if one of you have access to the Asia Dopod site please upload a complete "ship" version (English please).
Click to expand...
Click to collapse
I have backed up my Dopod 818Pro's original ROM (English version) to a BIN file that needs to write to an SD card before flashing the unit. If you want to try, please find a place that I could upload to.
Dopod 818pro dumped file...
Dear Khuanchai please upload it here to uload\818pro....
or just attach a file as a reply to this message... I read the threads of 818pro and I am sure that others could make use of it.... It is very usefull to other users as well.
Thanks you
Does the Jamin's ROM come with A2DP?
http://www.imate.com/t-DETAILS_JAMIN.aspx
Re: Dopod 818pro dumped file...
Dubi said:
Dear Khuanchai please upload it here to uload\818pro....
or just attach a file as a reply to this message... I read the threads of 818pro and I am sure that others could make use of it.... It is very usefull to other users as well.
Thanks you
Click to expand...
Click to collapse
Here is the original Dopod 818Pro ROM (WWE) with instructions. I had difficulty uploading file but finally finished. Let me know if you find the file incomplete.
Cannot attached file but here is the link:
ftp://xda:[email protected]/Uploads/DopodAsia.zip
818Pro bin file.... Corrupted...
Thanks for the efforts, however the zip file is corrupted.... I tried dnload it 3 times, the same file and zip is corrupted... I suggeste please verify that indeed your original file integrity is ok and upload it again. The best is just to attach the file to your message (if you have difficulties to use the ftp...).
Thank you..
does this rom support a2dp...??
kinson said:
does this rom support a2dp...??
Click to expand...
Click to collapse
No, it doesn't.
Hi,
sorry if this question was asked but I could not find previous posts.
I would like to try newer ROMs on my Qtek S200, but before I'd like to backup the current, original, ROM (SPL 2.09.0000, Italian OS), just in case.
However, wizBackup (mtty 1.42) refuses to dump the ROM since the phone is not CID unlocked (the error is "You didn't get the proper security level to download a specific image"). AFAIK the only way to CID-unlock the prophet with SPL 2.xx it is to use the downgrade procedure explained elsewhere. However, in this way I would loose the original ROM before I could backup it!
Is there some way to dump the original ROM before downgrading to unlock the device?
ok, I'll ask an easier question, then
anyone has dumped (or knows from where to download) localised Qtek s200 ROMs (especially Italian)? I can find no download area at www.qtekcorp.com
Two people lookin'... indeed :lol:
I'm still having - after 3 months - the same two problems.
Has someone sorted them out ?
Thanks and excuse my bump
looking for the same thing.
I'll end up unlocking and upgrading my S200 without a backup of the original ROM. I doubt Qtek will release any upgrades since the device is quite old now.
It's a shame they did not even release the original rom for download.
So too bad, I'll take the risk and unlock the phone. I'm confident that the imate Italian ROM, though not very new, will work better than the one I have now.
My S200 is 6 months "old", and for the very first three months, it hasn't any support data on pocketdevice site because "too new".
Now is it obsolete and nobody will release anything for such brick ???
What a kind of policy is it ?
Thank you, but I think this is a dead-end policy for QTEK
Bye
Qtek S200 Original .Cab files?
Does anyone have access to the original .cab configuration files that came under the 2.09 Rom Ver. ?????
Trying to remove the Batt. & Comm Manger icon from the base of the screen.
Under the 2.09 version both icons were removed when the unit 1st configures its self and places a batt. icon on the top tool bar.
Not looking to install any additional program that monitors all of these items just want the original config .cabs that perform all of these task.
Please post link or notify via private msg, Thanks
read the wiki
the official and original 2.09 files are on the ftp server....
Jesterz said:
read the wiki
the official and original 2.09 files are on the ftp server....
Click to expand...
Click to collapse
Also in Spanish language????
Annita