Applied MKS 27 MB patch and its working cool. But when I tired to re-flash with my original downloaded ROM with ROMUpgradeUt.exe the same hang and I have put JAM on bootloader to the same to start.
Earlier JAM it automaticlly go to bootloader to start the flash with ROMUpgradeUt.exe.
BUT the serious problem is that after the original flash my STORAGE Folder is missing and also my incoming call timers are set to 74500 hrs.
I know I did a very serious working thing ie I lost my first ROM backup to SD card. Please help help me slove this problem Plese.
did you get it back to work?
Related
Hi Guys,
Over the last 4 days I have been reading the posts and trying all sorts of possibilites to fix my Mini O2...
I did the stupidity of upgrading it without a back up. I bought a german O2. I live in Germany, but guess what I don't speak german. So, either I waited 10 years until I can, or updated it to english.
It all went wrong... nevertheless, I manage to download the qtek and used the no id software to upgrade it. it goes well, radio, ext rom, but when updating the rom - when it gets to half way, the program says there was a problem in upgrading the rom. Maybe some german configuration problem?
Can you guys guide me please? thanks a lot!!
I sorted it out.
Thanks for all those who took the time to look at it. Somehow mx Mini is crazy. What I did in the end was uploading each batch at time. Started with the Rom itself, thereafter the ext Rom and last the radio. I did that by extracting the whole package to a folder and removing/returing the parts I wanted at time. So now I have a full english version in my German O2.
Re flashing phone with wwe rom
What you need is to go into boot up mode on comapct i.e black screen with usb and seriel showing only. then you need to get with Maupgrade patch file and then you can bypass security issues on phone and re flash to wwe roms i.e qtek or i mate jam. Hope this helps everything you need is on this site.p.s remember to unzip the wwe file to get the 7 files and replace patch there before updating. 8)
email me on [email protected] for any queries i will try to help
Re: Re flashing phone with wwe rom
leeeel said:
What you need is to go into boot up mode on comapct i.e black screen with usb and seriel showing only. then you need to get with Maupgrade patch file and then you can bypass security issues on phone and re flash to wwe roms i.e qtek or i mate jam. Hope this helps everything you need is on this site.p.s remember to unzip the wwe file to get the 7 files and replace patch there before updating. 8)
email me on [email protected] for any queries i will try to help
Click to expand...
Click to collapse
Hello , I have a similar problem : I have a Qtek S100 from France but live in the USA . I tried to switch ROM with a WWE one (WWE_11200-172_11200.exe) and got a COUNTRY ERROR msg ; then I replaced the MaUpgrade by a MaUpgrade_noID one and now i am getting an "ERROR 150 : UTILITY ERROR" message ; dont really know what else to do and my phone is on boot mode ....
Could you please help...
Thanks in advance
ok i've done a bit of searching and i'm pretty sure its software related.
i got an mda pro from when i booted the phone up its had a o2 splash screen, so im assuming its had its software updated. so the phone works fine for about 6 hours or so but then it starts tt freeze up, propgrams stop responding and the phone wont do any thing. i left the phone like this for a few moments then i got a txt and the phone seamed to be working fine untill i went to use the camera and i got "the file camera cannot be opened. either it is not signed with a trusted cert or one of its components can not be found you might need to reinstall or restore this file".
ok so i had a look and found the Available Universal Versions and Upgrades
the thing is i'm not sure which is the best to use or how to do it.
what would you guys recomend i do ?
thanks
MDA Pro with O2 Rom?
Seems so that there is other Rom on it. Normally, this is not a Problem, but who knows, what was changed in this Rom.
I would recommend to download new Rom and install this.
Try http://www.my-xda.com/xdaexec_soft.html
Thats got the latest XDA update.... give it a go and then get the new 1.09.00 radio update too...
Hopefully that will sort you out!
chears i'll give that one a go and see what happpens. fingers crossed
ok so i downloaded the Xda Exec ROM v 1.13.188 from the above site followed the directions in the pdf file, connected the phone and made sure there arnt any programs running in the backgroung. when i try to runn the application to do the upgrade it says its trying to connect to the phone then gives
"error 201: get device data error
can not get device data
please make sure device is connected and run this update utility again"
only problem is that it is connected or so ms active sync says.
any ideas whats goign on or is there another way to update the software ?
thanks guys its apreciated
ok so i managed to get past that stage but
now i get
error 102 ce image file check sum error
the rom image file to be used for the update is corroupt. please download the correct device software update utility and try again.
i have no idea what that means any sugestions ?
@cusaeng, can't help with the ROM update but your initial problem of problems after 6 hours is typical of the Universal when its running low on RAM. Use an app like GSPMaigc+ which can really close processes and reboot once a day (obviously once you solve the ROM issue).
chears i'll look in to that program once i get the rom issues sorted
i've trued downloading a version of the jas jar rom and that give the same error message about being unable to get device information.
when i flashed phones befor eg a motorola a1000 you had to get the phone in to bootloader mode then use a progran to flash it is it a simaler process with the mda ?
i really dont know if i'm doing anything wrong or not
Hi guys,
Recently I updated my XDA Orbit with the new WM6.1 Diamondish ROM. Everything went great until I tried to install the Oops 6.1 ROM. Before trying to install the Oops ROM I tried to unlock the CID just in case (with your Artemis_USPL tool)... Half way through the setup screen displayed an error saying "Connection error... Please check the USB connection...". Just to clarify I never managed to install the Oops file.
Then I tried to install the original XDA WM6 ROM but with no luck as I got the same error again. Then I tried to start the bootloader manually (by pressing the voice recorder button along with the Reset one) and instead of the usuall 3 colour screen I got a blank white one. Afterwards the phone froze and I had to reset it so that I can use it again.
I did a small search on your website but because I wasn't able to find another similar case I decided to start a new thread.
Currently my phone works perfectly fine with my previous Diamondish ROM, but I seems that I can't install anything else.
Could it be a corrupted bootloader? If so, how can I fix it?
Any help will be much appreciated.
Thanks in andance!!!
Take out your MicroSD card and then try and flash
You were right! Once I got my memory card off my phone, the bootloader started as usual. Cheers mate!!!
First of all i want to tell you guys that when i was flashing MWG rom (WWE_020108_B2_DS) onto a O2 WM 6.0 (WWE_RC2140907B2) using pass.32 hack, setup ended up with error - "No target device found", even though it started normally. After this i did a soft reset on my moblile and it seems the windows rom has screwed up and it hangs after loading.
Though bootloader is working so i'll be installing O2 rom through USB later..
The major problem is that since i do not want to upgrade rom through SD, I wanted some roms that do it through DSUU, i tried some roms like TJ's, etc..
but no avail, they start correctly but then no progress and device just does a reset and loads back to Windows kernel. How should i resolve this?
For your information my Device info as on device info and back of device:
Model: O2 XDA Atom Life
S/N: BAL1G3C743C00YM
DATA BUS:32BITS
PROCESSOR: xSCALE ARMV4I PXA27X
FREQUENCY: 663 MHz
RAM: 64MB
ROM/FLASH: 1GB
ExtRom:EX0917
HARDWARE:V7
RADIO:AL1_KLN2340_070905_RS001
ROM:WWE_RC2140907B2 (BEFORE CRASH)
WINDOWS MOBILE 6 PROFESSIONAL
CE OS 5.2.1616 (BUILD 18120.0.4.0)
BOOTLOADER - AL1 640K EBOOT
Also i would thank in advance whomsoever is able to help me out or refer me to a rom that will work with my device.
Also i have noticed, my device uses some AL1 bootloader whereas most of the roms up here are for the boot loader MN1 and MN2, Does that make much of a difference and will i be able to install such roms from SD?
At morning 4 today, i got an idea, just like we remove 12 byte header and do a upgrade from sd, why not take the file of a rom and add the 12 byte header from the original ROM at C:\Windows\Temp\ and then replace it...
Though this idea worked perfectly and OS was installed but then a message popped on my screen "OS hash fail!" and had to install default ROM from boot loader using DSUU. any help will be appreciated
1st Problem Solved
I got the first problem solved by first getting a rom from o2 then one from mwg,
got their source,(RE) replaced the security hash check from o2 and builded a new rom containing device code of mwg. So now im officially (partly illegally) a MWG O2 owner.
Still looking for roms
Rick_1995 said:
First of all i want to tell you guys that when i was flashing MWG rom (WWE_020108_B2_DS) onto a O2 WM 6.0 (WWE_RC2140907B2) using pass.32 hack, setup ended up with error - "No target device found", even though it started normally. After this i did a soft reset on my moblile and it seems the windows rom has screwed up and it hangs after loading.
Though bootloader is working so i'll be installing O2 rom through USB later..
The major problem is that since i do not want to upgrade rom through SD, I wanted some roms that do it through DSUU, i tried some roms like TJ's, etc..
but no avail, they start correctly but then no progress and device just does a reset and loads back to Windows kernel. How should i resolve this?
For your information my Device info as on device info and back of device:
Model: O2 XDA Atom Life
S/N: BAL1G3C743C00YM
DATA BUS:32BITS
PROCESSOR: xSCALE ARMV4I PXA27X
FREQUENCY: 663 MHz
RAM: 64MB
ROM/FLASH: 1GB
ExtRom:EX0917
HARDWARE:V7
RADIO:AL1_KLN2340_070905_RS001
ROM:WWE_RC2140907B2 (BEFORE CRASH)
WINDOWS MOBILE 6 PROFESSIONAL
CE OS 5.2.1616 (BUILD 18120.0.4.0)
BOOTLOADER - AL1 640K EBOOT
Also i would thank in advance whomsoever is able to help me out or refer me to a rom that will work with my device.
Also i have noticed, my device uses some AL1 bootloader whereas most of the roms up here are for the boot loader MN1 and MN2, Does that make much of a difference and will i be able to install such roms from SD?
At morning 4 today, i got an idea, just like we remove 12 byte header and do a upgrade from sd, why not take the file of a rom and add the 12 byte header from the original ROM at C:\Windows\Temp\ and then replace it...
Though this idea worked perfectly and OS was installed but then a message popped on my screen "OS hash fail!" and had to install default ROM from boot loader using DSUU. any help will be appreciated
Click to expand...
Click to collapse
READ CAREFULLY....
ATOM n ATOM EXEC is almost the same.
but it is a really DIFFERENT when compared to ATOM LIFE.
that's all.
i'm reading ur post and totally don't understand what u're talking about.
I meant after installing MWG rom in Atom Life, through pass.32
The device booted but shortly after booting as i get to the home, screen goes white and i have to soft reset it.
Tried Hard reset
BTW i got how to install AL1.DIO through original DSUU
So problem Solved except i really want a MWG rom
Atom Life
try another ROM..
Rick_1995 said:
I meant after installing MWG rom in Atom Life, through pass.32
The device booted but shortly after booting as i get to the home, screen goes white and i have to soft reset it.
Tried Hard reset
BTW i got how to install AL1.DIO through original DSUU
So problem Solved except i really want a MWG rom
Click to expand...
Click to collapse
....use MWG ROM without replacing the pass.32 file. The pass.32 file is only used if you encounter a Model ID Error....
Installing thru DSUU
Hi,
I tried to do the upgrade based on the thread. Nothing happened other than the mobile getting restarted 2 or 3 times after pressing the camera/record + reset button. Is there any way I can get a DSUU installer exe which will take care of the upgrade .
Hey Rick,
how did you install 6.5 thru DSUU. Please help.
Regards
Arun
Just flashed the newest CM7 Update (update-cm-7-03262011-NIGHTLY-GalaxyS-signed.zip) and the newest kernel update (CM7_GT-I9000_kernel_kang_20110327_16_update.zip)
I dont actually know whether this is kernel related or related to the new CM7 update but now my phone has a SIMLOCK!!
I unlocked it several months ago using this and it worked perfect until I updated today... I did the procedure again but still no changes, lock is removed in nv_data.bin
EDIT: THIS IS GETTING REALLY WEIRD; Phone asks me for an unlock code now, If I want to call someone I get an error: no Simcard inserted. Same for Mobile Data. But If somebody calls me everything works perfect, I can talk etc! Oh and I also just had the keyboard-vibration bug (kernel related?)
EDIT2: just reverted back to update-cm-7-03122011-NIGHTLY-GalaxyS-signed.zip and CM7_GT-I9000_kernel_kang_20110323_02_update.zip where everything was working before... still no change!!
EDIT3: I deleted some files (old roms/kernels) on my sdcard before I flashed the updates to gain some space, could this be related to my problem?!
HELP!!!
Do you have a backup of the /efs folder? Tried restoring it? I'm no expert but I understand that's where the business happens. It may be corrupted somehow.
Did you try Darky's Resurrection Rom? Repartition with Odin - should take care of the issue.
HTH