I flash my qtek s100 with what i suposed to be the correct rom, but when it finished, it was dead. when i press the power button the vibration starts and nothing more happens. When i plug it with the usb cable to my pc it was the same: the vibrator stars and nothing more happens.
HELP ME PLEASE !!!!!
i dont know much about magician.. and also dont know this works in magician also.
Press "Power Button" + "Reset Button" then reflash!
Thanks. that's the first thing i've done, but it doesn't stop the vibration, and it wasn't recognized by my pc either.
The other night I had the shock of my life with my unit, but its a long story. Removing the battery for about 3 seconds did the trick for me.
Related
Hello, please if anyone knows the solution to my problem:
I bought a Tmobile MDA from a person who just flashed it with a Tmobile demo rom v4.21
MDA works normally when on craddle (charger) but when on battery it goes dead after i press power button... So, when I take it off the craddle it works normally on battery (battery is supposed to be brand new) but once turned off, the screen blinks once and MDA is dead.
When I just put it on craddle for a second i can turn it on and it works normally again...even on battery...
He is out of town and will be back on friday. He sais that this is a software problem and will be solved by flashing with XDA developer ROM.
Could that be true? The battery seems to bi OK until I press the power button...
I tried flashing ROM via USB but I get error 011 - execute remote communication program error....
Please help...
Thx in advance
valsimoT
hi. this is very strange to me. The software doesn't cause this problem. my be you look around the connector if the one of the bin is bent or broken. I am not sure but if you think the software problem, go ahead and upgrade the rom.
Thanxs for reply.
but MDA works on battery until it turns off automatically (power save) or if I press power button... When on craddle, power button works normally...
I can make calls and everything on battery but when I turn it off - id goes dead ((
Hello.
I have big problem with my Uni. It's not booting, it's not going to bootloader mode. When I connect Uni to computer the red LED blinks and nothing happen. Battery works in other uni.
hmm leave the uni on the charger with battery in.
also have you tried using another battery in the dead uni?
same problem
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
holy **** me too. i borked my sd slot so i took it apart, just popped off the back and fiddled with the sdpins and now it refuses to boot+redlight.
any thoughts? i miss my phone -_-
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
keyfetcher said:
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
Click to expand...
Click to collapse
did you try another battery in your uni? also did you try tapeing the pin on the battery that reads the voltage level?
according to the universal service manaul flowchart, a redlight indicated bad battery>bad battery pins>shot motherboard.
so i don't think this is good. anyone got any..thoughts on figuring out WHAT exactly happened?
Hi
thanks for the input
will you please guide how I can tape the pin on the battery that reads the voltage level
many thanks
help
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
keyfetcher said:
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
Click to expand...
Click to collapse
I beleive that BA_6.5.23004.WWE-xplode-R7.1 mean blue angel rom. http://forum.xda-developers.com/archive/index.php/t-482997.html
so you are pretty much out of luck unless you can jtag.
again the same problem
keyfetcher said:
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
Click to expand...
Click to collapse
...almost the same.
my problem occurred after I did a soft reset. It took it a while to boot and every other time I used soft reset the boot took longer and longer until it did not want to turn on again.
Soft reset doesn't work but when it's left on the charger and pressed, the battery light blinks once. It won't charge and my PC registers a device malfunction when connected through USB.
The only sign of life pops up when I press hard reset but after I press 0 or X nothing happens.
Please help!
I have same problem as well, I even bought spare battery but uni remains dead and silent.
Beside the fact that when it's connected to PC, windows show unrecognized usb device.
what happened before it died? did you ... do anything to it? mines still dead as a doornail.
I am not alone :'(
It means many other fellows are suffering from same.
strange , total silence from experienced guys... atleast they can say it is useless for you to try.. and now dig a grave for it.
Experienced guys have their own lives too
Wait with patience till someone replies you and do not double post on same topic please
omg...i have got really big problem...i cant turn on my htc wizard...let me tell you what happend:
my baterry was very low so the phone shuted down, and then i put it on charging,but when i was back i wanted to turn on my phone but i could not do that...when i hold the turn on button nothing happens...can you please tell me what is the problem if you know...
thanks!
sniffertobi said:
omg...i have got really big problem...i cant turn on my htc wizard...let me tell you what happend:
my baterry was very low so the phone shuted down, and then i put it on charging,but when i was back i wanted to turn on my phone but i could not do that...when i hold the turn on button nothing happens...can you please tell me what is the problem if you know...
thanks!
Click to expand...
Click to collapse
remove the battery wait until 10 minutes then plug it in again and press the reset button with the stylus
if no change try to hard reset the device with
-Press and hold the Comm Manager button and Voice Command
button on the device. At the same time, use the stylus to lightly
press the RESET button.
-Keep the Comm Manager button and Voice Command button
pressed, and the following message will appear on the screen:Press Send to restore factory default , other key to quit​-Release the two buttons, and press the Send button to perform a
hard reset.
Nope
no...that does not work...nothing happens ((((((((
i cant even charge my phone
please
oh come on please help me!!! ((( i need f*c*i*g help...hurry i need my phone (((((( xDDDDDD
Dont Feel panic!
Hi dude, That happened to me.. your case its very simple, your battery have to low charge level, so the recharge circuit can't start.
what u have to do? simple:
(you can see many video tutorials of this in youtube, and it worked for me)
1: take a 5VDC charger, cut the connector (then you will have just 2 cables the Positive+ one and the Negative- one)
2: take out the battery from your phone, and put the +cable on the +Pin of the phone, and do the same with the -Cable.
3: Put the battery on your cellphone (the cables can't touch any other pin only the + and - pins)
4: connect the charger, wait 10 Secs then turn on your cell phone, let it charge at least 10 Minutes (no more than 15 Minutes!) then turn of you cell phone, put out the battery, remove the cables, put the battery on the phone again, turn it on and charge it with a normal USB charger!
5: Enjoy
Notes:
-i use this method with my Wizard when my USB connector get broken, its 100% Secure for your device.
-you can know which is the + and - pin looking on the Battery
-if your battery don't take any charge its because its Depleted, you can found a new on Ebay =)
Good Luck!
Hi all,
I got a Samsung Galaxy S (i9000) from a friend who wanted to toss it away since he says it is broken.
I want to see if it is or not.
When I try to turn it on, complely nothing happens. When I put the charger in (or the USB cable fot that matter) a battery sign appears with 5 dots under it which move from left to right. When I try to switch the phone on nothing happens
When I wait a while, the screen goes black. When I try to switch on, nothing happens.
When I push the home button, the green charging battery appears again and the back an menu button light up.
A factory reset is not working at all. Can it be that the power button is broken??
Any help would be greatly appreciated!
Regards,
Vincent
Fixed it!
Hi,
I was able to fix it.
Thanks to this sticky: http://forum.xda-developers.com/showthread.php?t=1134975
This is what happened:
I tried just about anything, nothing worked. Then I saw a reply in this thread someone mentioning you should plug in the usb cable, push both volume keys and then maybe it could work. But of course, mine didn't.
Then I started experimenting, what did work was this
- take out battery
- connect usb cable to laptop
- push volume down + home simultaniously and then put battery in
Now i got into download mode (yellow robot and triangle + warning not to turn off target) and with Odin I was able to start the phone.
I then found out that the power button was indeed broken!
Phone works like a charm. Only thing is when I have a dead battery that I have to use Odin to start the phone. I will seek for a way to fix the defective power button.
Hopefully it will help other people with this problem!
BTW, thanks all for all the help
Good evening...
I've had this problem for the past 5 days..i tried a new ROM but didn't like it so i went back to my original rom...but the phone after the recover stopped working..so i tried using the RSDlite to install another ICS to be able to start my device.,and after the installation was almost done,,RSD requested the phone to be restarted,,after that it completely died! nothing happens when i start the phone..no light..no screen light..just one thin..when i connect it to the charger or to my pc the white LED is on...but the screen stays black like its OFF..
I left the device on charger for TWO days..
I tried Vol UP + Power to get into the menu...
I took off the battery for ONE day,,,
NOTHING...just black screen with white charging led,,
when i connect it to my pc..there isn't even the notification sound that a new device is connected..
not even RSDlite is able to find the device...
Please help me...i've tried everything i know..some ppl might say recharge the batt,,as i said i left it on the charger for 2 days!
i don't know what to do next !
HELLO !!
wahoby said:
Good evening...
I've had this problem for the past 5 days..i tried a new ROM but didn't like it so i went back to my original rom...but the phone after the recover stopped working..so i tried using the RSDlite to install another ICS to be able to start my device.,and after the installation was almost done,,RSD requested the phone to be restarted,,after that it completely died! nothing happens when i start the phone..no light..no screen light..just one thin..when i connect it to the charger or to my pc the white LED is on...but the screen stays black like its OFF..
I left the device on charger for TWO days..
I tried Vol UP + Power to get into the menu...
I took off the battery for ONE day,,,
NOTHING...just black screen with white charging led,,
when i connect it to my pc..there isn't even the notification sound that a new device is connected..
not even RSDlite is able to find the device...
Please help me...i've tried everything i know..some ppl might say recharge the batt,,as i said i left it on the charger for 2 days!
i don't know what to do next !
Click to expand...
Click to collapse
While phone is off do the following:
1. Press volume down button and power off button both together till you see Android Robot with (!) Exclamation mark;
2. Now release both keys and press volume keys (both up and down volume keys together);
3. This will show you Stock Recovery;
4. Now from volume down key select "wipe Data" and execute it with power key;
5. Now select Reboot.
This will probably resolve the issue. However, if the issue still persists then you need to use RSD lite to flash your phone with the some Froyo SBF.
For more info: http://forum.xda-developers.com/showthread.php?t=1216982
[Note: To enter bootloader menu so that RSD lite recognize your phone you need to have its USB drivers installed on your system and while booting you need to press Volume Up key and Power key together while phone is off to enter Bootloader menu to flash with SBF.]
Hope this helps!!
ATB!!
wahoby said:
Good evening...
I've had this problem for the past 5 days..i tried a new ROM but didn't like it so i went back to my original rom...but the phone after the recover stopped working..so i tried using the RSDlite to install another ICS to be able to start my device.,and after the installation was almost done,,RSD requested the phone to be restarted,,after that it completely died! nothing happens when i start the phone..no light..no screen light..just one thin..when i connect it to the charger or to my pc the white LED is on...but the screen stays black like its OFF..
I left the device on charger for TWO days..
I tried Vol UP + Power to get into the menu...
I took off the battery for ONE day,,,
NOTHING...just black screen with white charging led,,
when i connect it to my pc..there isn't even the notification sound that a new device is connected..
not even RSDlite is able to find the device...
Please help me...i've tried everything i know..some ppl might say recharge the batt,,as i said i left it on the charger for 2 days!
i don't know what to do next !
Click to expand...
Click to collapse
Have you had enough battery when you were flashing the sbf/could it be possible, that the battery died during flashing process?
thanx 4 the reply,,but i have all the drivers installed on my pc,,and the phone won't start..i tried the Vol Down+ powe..nothing..Vol Up+ power nothing..Both Vol+ power also nothing..i left the phone on charger for two days..still nothing..when i try the RSD it doesn't find the device...even when i connect the phone to the pc..there isn't any sound to a new device is connected !! just the white led is on..but screen is always black nothing at all
i have used the RSD before and i know how to install roms using it..also i know how to go to boot menu or recovery menu..but right now i am unable to do anything
Try this:
http://forum.xda-developers.com/showthread.php?p=10264115
Why?
Cause a damaged OS, cannot charge your battery. you must pull your battery out of defy and charge the battery externally.
Or you buy a new battery, or let charge your old battery by a cellphone-seller, or asks a friend of yours with a defy to charge your battery for you etc.
Have u checked the voltage of your battery, it must be 4,1 V if the battery is fully charged.
I think esok44 is right your battery is empty, there is not enough power in it to start your defy.
i just tried the usb modification to connect it to the battery directly,,done all the steps as told ... nothing!!!
i'm really getting frustrated cuz its been like this for the past one week,,i've tried everything
don't have any friends with defy phone...
can't think of anything else to do but to brake the phone
well if everything fails, give it to motorola...
if it really is broken and everything fails, then try it.
would be the last option for me, but at least it is one...
But as is said, had the same problem and in may case it worked...
i've read on xda about an usb-manipulation to flash sbf when battery is empty, maybe you could try this...
I'll add a link to it
Link: http://forum.xda-developers.com/showthread.php?t=1489289
i have encountered this problem previously and the solution was replacing the battery, as RATTAR said the battery is not charged. try to charge your battery or try another charger, once it's charged rsd will recognize it. don't panic or despair.