the cab that will Run the Sins.Merged.v2.0.exe in Sins.Merged.v2.0.zip to create the Sins Merged ROM v2.0 and then extract all the cab inside the ExtROM.zip, so it will automatically run and will install the files, and after it install it will remove the cab..
It need to be place in Extended_ROM Folder and add this in config.txt
CAB: \Extended_ROM\XdA2JoJo.v3.2zS.cab
Responsible for creating the Sins Merged ROM v2.0 Plus Compress Extended ROM(Zip Method)
Philippine WM2003SE version 3.2zS
A Type of COMPRESS EXTENDED ROM that uses the Plain Zip File created by any Zip Program in PPC or PC, make it possible to install during hardreset thru XdA2JoJo.v3.2zt.CAB, just include the cab in the config.txt then it will extract one by one the cab inside the ExtROM.zip and then it will run it (no need to state the cab inside the extrom.zip in the config.txt)and after installing the cab, the cab program will automatically delete the cab file in your device(but not in ExtROM.zip)
To see some of the Example Click here
Hi all,
I have a cab file (call it cab1) containing three files to install on a WM5.0 device. These three files are another cab file (call it cab2) and two config files. I drop cab1 onto the device and it executes. This puts cab2 and the two config files into the correct folders that I want. This is all fine
What I need to happen then is for cab2 to auto execute without anymore interaction. How can I add this instruction to cab1?
Dropping cab2 into the startup folder and waiting for the device to soft reset is not an option for me
The whole install needs to happen on the device by sending a single cab file to the device i.e. I cannot use any msi etc to install over ActiveSync
I've created the cabs in VS2005
Thanks for any help
This one is tricky. You need to create a setup.dll for cab1 then have it launch an exe and exit. The exe will wait about a second for th cab installer to complete then launch the installation of cab2.
i believe this is the only way to accomplish what you want with one cab without combining the content of cab1 and cab2 in to a single cab.
Thanks levenum
Combining the cabs is what I would like to do but cab2 is signed so I can't unpack it without breaking it. That's why I went down the road of putting it into another cab with the other files I need to install
Is there a way to add a post-install command to launch cab2 in the setup.dll of cab1(or anywhere else)?
What levenum means is that you can't launch the installation of the second cab from the first one. The reason for this is that only one instance of wceload.exe can be running.
You need to build a setup.dll in the first cab file. The first cab must also have an exe that will install the second cab file. You launch the exe from the setup.dll. The exe must wait until wceload.exe has shut down after installing the first cab before it can install the second one by running createprocess on wceload.exe with the right arguments.
If you don't know how to make the setup.dll, take a look in the Windows Mobile 5.0 SDK. It includes an example on how to do this.
Did you get it?
Øystein
ReLoad
This is a MortScript script written to simplify reinstalling cab files, and restoring files back to the device from a zip file on the trinity.
More information about MortScript at http://www.sto-helit.de
-v.01 Initial Release
Known Issues
-Cab files that initiate the installation of another cab file ie.Wisbar Advanced
-How to setup:
1)Extract Reload.rar to your storage card.
2)Place cab files in the CabsAuto folder if you want to the cab to be automatically installed to the device (installation to automatically install to the storage card is currently not available).
3)Place cab files in the CabsManual folder if you want to be able to choose where to install the cab.
4)Place file in the Backup.zip file that you want to be restored.
ie. If you wanted example.jpg to be placed in the \Windows folder, place example.jpg in the Windows folder of the zip file.
*Please note that the cab files placed in the CabsAuto folder need to conform to only asking the user for the installation destination, then showing installation successful/unsuccessful. Otherwise you might encounter some
problems. You should place cabs that don't conform in the CabsManual folder, or adjust these cab files with programs such as WinCE CAB Manager.
-How to use:
1)In the Reload folder, execute Run1st. Click ok the the window that pops up. This just installs MortScript
2)Execute Run2nd. This will initiate the script that will first install the CabsAuto, then CabsManual, and finally restore the files in the zip file.
Use at your own risk.
Download
http://rapidshare.com/files/29964511/Reload.rar.html
Thx, that's a good idea.
is there a way to have it restore registry entries from a .reg file?
Is there a way to install certain cab files on RAMDisk/Storage card without individually clicking the install option??
@racerx_
Currently there isn't a way to restore the reg file directly. But you can create a cab from the reg file and then have that cab automatically installed.
MortScript wasn't able to read in the reg files i saved with resco explorer, so I gave up on doing it this way. For right now the easiest way is to create a cab file with WinCE Cab Manager.
@c_shekhar
The best way to install the program to the Storage Card, backup the reg (and any possible files installed on rom), then create a cab from this.
This post has alot of good information on this.
http://forum.xda-developers.com/showthread.php?t=277727
yeah, i've been trying like a madman to get win ce cab manager to make a cab of my .reg file.. but when i click on 'import' and try to grab the .reg file it tells me it's only for registered versions of the program.. is there another way i'm not seeing? cause right now the only other options i see for registry entries is to manually create them one by one which doesn't sound very exciting hah
thanks for the help..
@racerx
What OS and version of WinCE Cab Manager are you running. I heard of some problems with the newest version of WinCE Cab Manager with Vista. I am running version 2.1.0.35.
If that isn't it, you might have run the program past its initial trial use.
hmm.. Win Ce CabManager is 2.1.0.50 running on xp.. still got 17 uses left.. sigh..
Maybe i missed something. Just in case, what button or command are you using to get your .reg file into WinCE? I was using the 'file' 'import' command.
@racerx
That's the same way I do it. I would find an older version and try it again.
Reload V0.2
I made a couple of changes to the script for a rom we are going to be releasing soon...it checks if Backup.zip exists and only does the unzip if it does...I also added a SDBackup.zip for files to unzip to Storage card (specifically exe's and dll's I've already upx'd to shrink them but reinstalling the cabs replaced them again so this puts them back)....
#ReLoad
#v.02 Initial Release
#Use at your own risk.
#v.02 Extract files from SDBackup.zip to Storage Card
If(Question("Do you want to ReLoad?", "Reload 0.2", "YesNo")="No")
EXIT
EndIf
Run("Storage Card\ReLoad\Bin\Message_Running.mscr")
RegWriteDWord("HKLM", "Comm", "AutoRunFlag", "0")
RegWriteString("HKLM", "Comm", "AutoRunCFG", "\Storage Card\ReLoad\CabsAuto\Config.txt")
#Create Config File
Delete("\Storage Card\ReLoad\CabsAuto\Config.txt")
WriteFile("\Storage Card\ReLoad\CabsAuto\Config.txt", "SHOW:\Storage Card\ReLoad\Bin\ReLoad.bmp^NL^")
ForEach x in files { "\Storage Card\ReLoad\CabsAuto\*.cab" }
WriteFile("\Storage Card\ReLoad\CabsAuto\Config.txt", "CAB: ", 1)
WriteFile("\Storage Card\ReLoad\CabsAuto\Config.txt", x, 1)
WriteFile("\Storage Card\ReLoad\CabsAuto\Config.txt", "^NL^", 1)
EndForEach
#CabsAuto Install
RunWait("\Storage Card\ReLoad\Bin\AutoRun.exe")
#CabsManual Install
ForEach x in files { "\Storage Card\ReLoad\CabsManual\*.cab" }
RunWait(x)
EndForEach
If (FileExists("\Storage Card\ReLoad\Backup.zip") )
#Restore files from zip to main storage
UnzipAll("\Storage Card\ReLoad\Backup.zip", "")
EndIf
If (FileExists("\Storage Card\ReLoad\SDBackup.zip") )
#Restore files from zip2 to storage card
UnzipAll("\Storage Card\ReLoad\SDBackup.zip", "\Storage Card\")
EndIf
KillScript("\Storage Card\ReLoad\Bin\Message_Running.mscr")
If(Question("Finished ReLoading.^NL^Do you want to reset?", "Reload 0.2", "YesNo")="No")
Exit
EndIf
Reset
Very good soft, it works nice !!
The only difficulty for the french users is to replace in the script "Storage Card" by "Carte de stockage"
Thx men for this !!!
Nice soft,
I could use FAMAN WM6 on my trinity now !
French translation and modification is (seem to be) ok.
Just wait the OK from the boss and I'll give you !
Edit : Why don't you use the LOCK:Enabled in the header and LOCKDisabled on the end of the config file ? Thxs in advance.
I use SettingsSavior on my Trinity mainly for its similar auto-install functionality
Hello,
Thank you for this very useful tool
My .cab are removed after using Reload. How can I keep my .cab on my SD after a new installation ?
Thank you for your help.
Guillaume
__________________
SPV M700
FAMAN 4.03.FR
1.50.08.11
2.79.7020.19H
can this software reinstall cabs, copy skin files in programs installation directory (eg pocketcm skin) and reconfigure mail and exchange accounts ?
OOPS delete this post.
from what i see in other posts, there's no exteneded rom...
i've got hypercore kitchen, and using that and reading some documents, to install cabs into my rom, use packagemaker (can't remember who's) place the package in build etc. but some cabs have files by the same name as others which creates a problem for buildrom - file already exists
so my thought was put problem cabs in ext. rom, but as there is none, how can i go about putting these cab as cabs, and getting them to install automactically?
arh, think i've worked it out. in OEMAPPS, is a fileConfig_AP.txt, where it installs opera from a cab,
Code:
CAB: \WINDOWS\WM6_PPC_HTC_Opera86_2730_WWE.CAB
so if i put my cab in that folder, and copy the syntax, it will install what i like as in doing the same in the ext.rom