Related
I HAVE TRIED ALL THE GPRS SETTINGS ON THIS SITE BUT STILL CANNOT GET IT TO WORK,
BUT IF YOU ARE LIKE ME.
MY FRIEND AS A ORANGE MOBILE SHOP.HE IS GOING TO GIVE ME THE FULL SETTINGS ON SATURDAY 28/06/03. AND I WLL PUT THEM ON THIS
SITE
i have just got back in, and it WORKS, i have a xda on o2, i have unlocked my 02 xda with the software on this website, it is really good. But the settings on this website for the gprs none of them would work. I had an Orange pay monthly sim card with gprs enabled which, when i unlocked my xda, i couldn't establish a connection with gprs so here goes; here are the settings you need:
on the xda today screen
go on (start)
(settings)
(connections)
(connections)
on the,( when needed,automatically connect to the internet using these settings
drop the menu don and tap (new)
and write (orangegprs)
tap (next)
on the (select a modem)
drop the menu don and tap (oncellular line gprs)
drop the menu don and tap (baud rate) and tap (19200)
and tap next
access point name (orangeinternet) and tap finish
go back to (connections)
and tap (dialing lacations) tap dialing patterms change all the settings to G
tap (ok)
on connections tap modify orangegprs
tap modem tap orangegprs,tap advanced,
tap use name servers, tap use specific server address,
in dns 158.043.192.001
in alt dns 158.043.128.001
in wins leave it as 0
in alt wins leave it as 0
tap ok
tap next
tap finish
tap ok
that's it, you're done, but it's important when you connect to the internet, you must go from the today screen - start - settings - connections - connections (again) - and connect. Once you have connected to the gprs, then launch internet explorer.
If you don't do it this way, the 02 software wants to change all your connection settings back to 02.
Hope this helps you all out.
Please give me feedback
HI dave,
I was just going to post a message asking if someone had grps settings for orange in the UK !!!!!
just like you , i had an o2 xda which i unlocked using the fab tools by xda-developers.
i will get gprs enabled on my sim and then try your settings.
You are saying that, once configured, i cant just click on IE to launch the gprs ?
thanks mate
Hi Ali-Butt
I forgot to say you will b asked for a user name and pass word
leave this all blank and judt tick the save box
cheers mate
i am doing the settings now !!!
can i ask, why you have one set DNS settings and another posts by other chaps have others????
i have seen
dns1:193.35.131.194
dns2:193.35.131.195
are these wrong?
thanks mate
HI Mate
WhenI got the GPRS working with the settings I have posted, when I clicked on ie, without connecting to the GPRS first the settings change back to the o2 settings. How I connect is to go to start, settings, connections and connections again and then connect, then the GPRS will connect then I launch ie. Since then I removed from the xda the o2 smart menu from the add and remove programmes now I can just launch ie and I have no problems, at the beginning when I put the settings in and I was having trouble with the o2 settings taking over, for some reason I can't understand the orange settings were all still correct but would not work so even though the settings were still there and correct I had to start re entering them as a new connections all over again. Hope this helps you out, if you have any trouble please post a message on here and I will be more than willing to hepl you.
cheers Dave
HI Mate
pay as you go. i think
dns1:193.35.131.194
dns2:193.35.131.195
it is pay monthly i think but these work
dns1:158.043.192.001
dns2:193.043.128.001
dave
Hi dave,
thanks for your posts.
i can now tell you my findings.
firstly, i created a new connection with the apn "orangeinternet"
using cellular gprs as the line and 19200 as the speed.
If i click on ie.... it connects first time !!!.. works a treat !
if i click on internet on the O2 smart menu, it tries to connect back to O2....
so quick solution, just remove it from the main screen and your laughing!
so mine is all working without specifying any dns settings. Perhaps its all dhcp , with ip / gateway / dns all coming down from orange?
do you think it will make any difference adding them in?
perhaps faster name resoultion?
cheers dave
ali
I dont know why but i cant setup my PAYG orange sim for gprs...pls help
Orange GPRS
Hi,
I'm a bit of a newbie with the XDA, Ive setup as per the instructions above and I'm connecting ok (i think) - as i can send retrieve emails and surf - I'm just a little unsure as to whether it's connecting via GPRS or just by a data call as I dont get the "G" on the screen to signify GPRS - can anyone help please
Cheers
G
Hi, i have this sorted now. you create a new internet connection and use the gprs setting from the dropdown, the only setting you need is the accesspoint name which id payginternet, all other settings are default... even the orange phone trainers couldnt get it working.
:lol:
ABSOLUTELY BRILLIANT GUYS, IT WORKS A TREAT!
LAST NIGHT I WAS SO DESPERATE THAT I WAS GOING TO CALL IT A DAY, BUT… I KEPT READING YOUR POSTINGS AND I THINK YOU ARE ALL SUPERB!!!
MANY THANKS TO YOU ALL. NOT EVEN ORANGE KNOWS HOW TO DO THESE SETTINGS.
I need HELP !!!
I have tried to follow various updates here to connect my O2 XDA via GPRS to ORANGE UK. It have the PPC2003 Cooked ROM and hence none of the above instructions are quite what I see.
However all I had to do was:
start -> settings -> connections -> connections --> created a connection called ORANGE with modem type "Cellular Line (GPRS) -> Next -> "ACCESS POINT NAME" typed: "orangeinternet"
Afterthis do NOT fill in anything for userid or password and just select FINISH.
I also had to: Start -> Settings -> Connections -> Connections -> select ADVANCED tab -> "Select Location" button -> select Mobile and press Edit button -> Select DIALING PATTERNS button -> For ALL entries select "G" instead of the default "+EFG".
With all above done I CAN connect to internet and even connected to my ISP WEBMAIL but it is slow. I also do NOT get the "G" icon for GPRS.
I am not sure if this is conecting via GPRS or NOT ???
when I type WWW.ORANGE.NET it does say it is connecting via GPRS but I do not see the "G" icon. Any help ???
Also I just signed up for ORANGE UK EMAIL and then tried to via orange.net instruction to configure my XDA inbox but they only recognise a small number of PDAa with PPC2003 connected to a phone via bluetooth or IRD. They do not support PPC 2003 or XDA.
HOW Do you configure the XDA inbox to connect to orange pop3 and smpt server and download mail ???
PS: I can ping SMTPOUT.ORANGE.NET but no pop3 server...
Thanks for any help. :!:
I just figure out what to do to get connected to Orange email.
Simply: start -> Inbox -> Accounts -> New Account -> Type in your Orange EMail Address -> Type in your USERNAME and PASSWORD and select "Save password" -> NEXT -> FINISHED.
That is it. I can connect to internet and email via my INBOX and WEBMAIL.
WEBMAIL is slow but inbox is just OK on the move.
Hi I have a XDA II I have unlatched it from O2 I am now on orange I need to be able to send and recieve MMS, the instructions dont seem to work on my XDA, orange say that I am enabled to send MMS.... can anyone help please Thank you
asking about internet sharing with P3600 and P6500
Hello,
i have learned a lot reading this forum and i am wondering if you know about this:
When my PC connect to internet through internet sharing of P3600 i get H mode (HSDPA), then how can i see the real rate of sharing ?
Is it reaching 10 Mb of local network, or else ?
What is the real rate of HSDPA for P3600 ? And for P6500 ?
(1.6 Mb/s and 7.2 Mb/s ? )
Do you think QUALCOMM of SIRIUS P6500 can support overclock ?
Do you know DNS settings for french orange internet with PDA ?
Thanks anyway. Mobility with HTC is much fun and efficiency.
; -))
I also share this experience about energy saving on HTC P3600 and TYTN:
Many users are complaining about autonomy of HTC. I have check settings of internal cards and everything is set - no saving - in extended settings.
Then, i experienced the setting - energy saving - during travels.
I does work, and i get days of battery autonomy.
The most impotant is to set SD card to -ernergy saving, and Wlan, and Wifi, and infrared, and also two other network cards.
Let me know your experience and setting about energy saving please.
Hi,
I have wrote this wiki document and I wish someone gets his device connected to the "rest of the world" over a bluetooth connection.
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
FYI..
PS: Nice fiddling around..
Hi Subzero5
Great post , almost what I need .
I have the XDA11i and want to access the net via a blue tooth modem , which I plug directly into the wall socket . So far i have hit a big blank .
Any thoughts , can get the two devices linked but no further , cant get the XDA11i to tell the modem to dial ?
Regards
Astro1
XDA <-bluetooth-> Mac <-internet ???
Hi: Is there a possibility to share the internet to bluetooth with Mac OS X.4 ?
I tried the System Preferences, but there is no bluetooth-option!? How can i setup a such a bluetooth bridge?
$hred
if u have activesync...
file->connection settngs;
in the box "this computer is connected to" chek "the internet" and every time
u use activesync u are online...thats how i use it...
Nice text btw!
Vanja
Hi from a newbie. I've just bought the TyTn11 and would like to use bluetooth to access my laptop's internet connection. Part 1 of your instructions were easy enough to follow but part 2 confused the hell out of me - not least because I don't have a Network Cards icon from Start > Settings > Conections >. The TyTn is running WM6 if that's any help. Any pointers would be greatfully accepted
it's
Start > Settings > Conections > connections > adcanced > select network
pick the item in the dropdownbox which is not called something like my isp or such
usualy the 2th item
Thanks Rudegar, I'll give it a try.
Hi,
I'm trying to get Internet over bluetooth working on my TyTN with WM6.
I've got bluetooth network access point configured on my Linux PC so part 1 is done.
In part 2 I've successfuly configured IP and DNS for Bluetooth PAN driver but I can't find the option "Join a personal network" in my bluetooth settings.
Actually I'm stuck in part 2 point 6 as there is no <u>Bluetooth Manager</u> link under bluetooth settings.
Any advice?
imit4t0r said:
if u have activesync...
file->connection settngs;
in the box "this computer is connected to" chek "the internet" and every time
u use activesync u are online...thats how i use it...
Nice text btw!
Vanja
Click to expand...
Click to collapse
not works... for me :S
also i noticed that in "network connectins" appearing 'Local Area Connection 2'. i know i know it is my connected prophet.
so when i "allowing to use internet through my computer" on "Local Area Connection" , disappears connection with my prophet ! and when i do it on LOC2 disappears internet :S .
also tryed something like Rudegar said but there is :
"select a modem" (cellular line, cellular line(gprs) , generic IrDA , hayes compatible on com1 ) , tryed with com1 but it asks user / password / domain ...
i just dont know what to do, help...
How about two pocket pc's?
I'd like to connect my bluetooth-enabled e800 through my hx4700,but there's no "connection sharing" that I can enable.Is it enabled automatically?
thankx mate for info but i have htc p3300 Start > Settings > Conections > connections > adcanced > select networkit show only ( 1 my work network)(2 my ISP)which i should connect????
Hi,
I can't find out how to access this on a HTC Touch (Elf). Can someone please help?
Thanks
SubZero,
I not sure if you're instructions are correct.
From you wiki page-
Part 2: Setting Up Your HTC:
1. Go to Start > Settings > Conections > Network Cards. This option doesn't exist!
2. Tap the adapter named Bletooth PAN User Driver. You will now see IP Address tab selected in the Settings.
3. Select Use server-assigned IP Address.
Could someone who has done it on thier HTC diamond please check this?
Thank You
KOPRajs said:
In part 2 I've successfuly configured IP and DNS for Bluetooth PAN driver
Click to expand...
Click to collapse
Could you please explain how you did that!?
I'm on WM6 htc touch diamond.
Thanks so much.
for diamond you have to go settings/connections/Wi-fi/Network Cards tab
but after that the problem is part2 6/7.... there is no link named Bluetooth Manager....
let me know...
KOPRajs said:
Hi,
I've got bluetooth network access point configured on my Linux PC so part 1 is done.
Click to expand...
Click to collapse
Hello,
Could you tell me wich linux you use and how did you get your NAP working ?
Thanks
How can it be done on HTC HD
I can see that PAN is supported on thhe HD.
No network cards option under setting>connections
Please assist how to reach that PAN profile on my HTC HD
Thanks
same problem, doesn't work with htc diamond... if somebody has an idea, please post! thx a lot!!!
Well I think all comes from WM6 and above....
that su*ks ...
If anyone know a third party tool allowing to do this
I just applied this registry hack
Show Network Operator Name in today screen
Restoring Today Item: WiFi, BT and Phone Connection Status
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items]
Create "Wireless" use Key
"Flags"=dword:00000000
"Options"=dword:00000000
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
to my imate jasjam and it works a treat. I wondering is there another hack or option to show the Cell Name/ID that the phone is currently connected to. Much like the option "Cell Info Display" on the Nokia phones.
Cheers
Ad
phoneAlarm does it.
On the Hermes, you can use the FieldTest.exe app available on the Wiki to view realtime raw statistics about the cells you're connected to and the various aspects of your connection, but as far as I know there's no tool to show the cell ID and the stuff the Nokia would show.
That didn't always work for me though on the Nokias I had... Depended on which phone I did it on, very odd.
Hello and happy new year to everybody,
a newbie question: I did the indicated trick and I display not only my carrier name, but also Wifi and BT status, plus my owner info.
I would like to display the carrier name only. Is that possible?
Thanks,
Richard
"DLL"="netui.dll" can anyone tell me how to create this i use resco registry i can't find a way to create this registry
p.loong said:
"DLL"="netui.dll" can anyone tell me how to create this i use resco registry i can't find a way to create this registry
Click to expand...
Click to collapse
New ----> String Value
Should be in the wiki
S.K.
silent_killa said:
New ----> String Value
Should be in the wiki
S.K.
Click to expand...
Click to collapse
It is Thanks
AdStar said:
I wondering is there another hack or option to show the Cell Name/ID that the phone is currently connected to. Much like the option "Cell Info Display" on the Nokia phones.
Cheers
Ad
Click to expand...
Click to collapse
I think many people on XDA have been searching for a solution... and I think its been out there for quite a while!
You need to download this today screen plugin - it is able to show Cell Broadcast messages on the today screen, besides other nifty stuff. Best of all, its FREE!
http://www.chi-tai.info/cs_BatteryStatus_XDA_Neo_WM5_def_iM_cs.htm
Next, you also need to subscribe to the Cell Broadcast feature. It is located in your phone settings, under the "More" Tab. Enable Cell Broadcast, and add Channel 50 to the list of subscribed channels.
Channel 50 is the one that shows you the cell/area name (only on networks that support it) - the same ones you see on non-smartphone Nokia or Ericsson handsets.
I'm going to try it out myself now...
EDIT: It works! Brilliant!
Yes atlast something to cheer about
I was looking for this for long time, Have installed the extended version, I think its still not perfect when it comes to display area info. its better then commMgr by the way.
Cell info in 3G
Can anyone explain why I rarely see the cell info when the phone has 3G connectivity. If I turn off 3G, I get the cell info messages!
On my wife's Nokia, the cell info comes up in 3G or 2G coverage!
hardcore said:
Next, you also need to subscribe to the Cell Broadcast feature. It is located in your phone settings, under the "More" Tab. Enable Cell Broadcast, and add Channel 50 to the list of subscribed channels.
Click to expand...
Click to collapse
I can't find the "More" Tab on my WM6 LG-KS20.
In sony ericson cell phones, there is option in messages settings that you can set it to get Area Info. After that you will see some information about your cell location in first screen.
is there any program/tool for getting area info on wm5?
Such app ewisted also on Nokia
Yes, that would be good to have such app on HTC. I remember to have used an app on my Nokia (7650) that allowed to automatically change my phone profile depending on the area it received from the operator antenna.
Any info on that ?
pi3ch said:
In sony ericson cell phones, there is option in messages settings that you can set it to get Area Info. After that you will see some information about your cell location in first screen.
is there any program/tool for getting area info on wm5?
Click to expand...
Click to collapse
this is called channel service(s) - i dont think u can get this with ppc
pi3ch said:
In sony ericson cell phones, there is option in messages settings that you can set it to get Area Info. After that you will see some information about your cell location in first screen.
is there any program/tool for getting area info on wm5?
Click to expand...
Click to collapse
yes you can...
- go to settings > cell broadcast
- check the 'Enable' and 'Receive Channel List'
- tap 'Add' or 'New'
- give any name (e.g: location), and enter the channel number '050'
- DONE. you will receive a message from network everytime the phone enters new area.
credits to someone in this forum (i forgot) who gives this tips.
Thanks.
Or you could install Google maps. (Visit www.google.co.uk/gmm on your mobile web browser)
It has a location function based on cell sites (no more accurate the more cells near you.. It gives you an area on the map displaying where you are (in case you've got no windows). You can then search for businesses in your area.
r04d5t3r said:
yes you can...
- go to settings > cell broadcast
- check the 'Enable' and 'Receive Channel List'
- tap 'Add' or 'New'
- give any name (e.g: location), and enter the channel number '050'
- DONE. you will receive a message from network everytime the phone enters new area.
credits to someone in this forum (i forgot) who gives this tips.
Thanks.
Click to expand...
Click to collapse
There is not cell broadcast option in my settings!
gmm need internet connection for working.
Slave1 said:
Or you could install Google maps. (Visit www.google.co.uk/gmm on your mobile web browser)
It has a location function based on cell sites (no more accurate the more cells near you.. It gives you an area on the map displaying where you are (in case you've got no windows). You can then search for businesses in your area.
Click to expand...
Click to collapse
Another vote for Google Maps. I'm running in my 8125 and it will give you a good idea of where you're at area-wise. Plus, it's simply an excellent mapping and navigation system.
However, the way it works depends on someone with an active GPS transponder being in the same general area as you. Now, this works most of the time perfectly well, and will give you a pretty good pinpoint of where you're at (within .5km or so, is what I've found). That said, sometimes late at night when not many people are out and about, or when I go over to my girlfriend's house, who lives in a sparsly-inhabited part of town, it won't always come up with a fix.
Still, by far my favorite application on my phone.
pi3ch said:
There is not cell broadcast option in my settings!
gmm need internet connection for working.
Click to expand...
Click to collapse
cell channels only available in selected models
you can add a third party application but it will be dependent on your radio rom!
google maps support this but you will have to pay for it because its over GPRS or EDGE.
jahrami said:
cell channels only available in selected models
you can add a third party application but it will be dependent on your radio rom!
google maps support this but you will have to pay for it because its over GPRS or EDGE.
Click to expand...
Click to collapse
I am really seeking for another application, do you know one?
Also I saw in O2 XDA ppc with wm5 that there is option in phone setting for setting broadcast channels is it possible to use o2 cpl file in my ppc?
is there any GSM codes or GSM command to enable Broadcast Messages?
Heey Guys,
I have another question for you..
Is there anyway to switch my gprs, hsdpa, 3g off, so they can NEVER turn on automatically?
So i cannot update stocks, the weather, or go on the internet without permission or only with wifi!!?
Thanx a lot.
Mike
You could use NoData or delete all Your GSM Provider Connection Settings.
D'rath
oke tnx.. where i can find NoData?
Just remove all apn's from connections
Mikeeeay said:
oke tnx.. where i can find NoData?
Click to expand...
Click to collapse
In Google!
http://garsim.blogspot.com/2009/02/modaco-nodata.html
maTTeo
Hi -just go to Settings > Connections (tab on the bottom)
Then click Connections icon and go to Advanced (tab on bottom)
Hit " New" Internet connection (box at the top)
Type in any name you want with no settings ,then click OK ,ect.
Next time you click on the weather or internet it will come up with an "connection error "
hehe!
I mistakenly thought the weather was free - i'll look out the window now.
Cheers