hi peoples,
for those that might not visit elsewhere thought id let yas know about the new patch released 19/04/05 for the no bluetooth hardware problem on imate jam's available from Imate website.
Speedn
could you please post the BT FIX over here, because you need to be a JAM Member in oder to DL form there web site
thanks
here is the patch....... tho i haven't used it cuz now i'm using qtek ver 1.11
thanks man
PS: did anyone already try this patch ? Can you post and let us know if that work for you? Thanks
Has 1.11 cleared up this problem?
I didn't think it had. But I've just been trying to replicate the problem before I installed the patch and I can't get it to break!
i have been using the 1.11 and never got the error... and the ext rom of the 1.11 inludes a similar patch if not the same one
PapaDocta said:
i have been using the 1.11 and never got the error... and the ext rom of the 1.11 inludes a similar patch if not the same one
Click to expand...
Click to collapse
I'm still using the 1.06 extended ROM as at the time I put 1.11 on, I'd only had the Jam a few days and it was the easiest way not to lose my Vodafone settings!
Yet I still can't make it happen to order like I could. Thought I had, but must have been in one of the jumps back to 1.06.
At least if it does happen I now know there is a patch!
i installed this patch and then the bluetooth icon disappeared in today screen (bottom right corner)... although it's working properly.
try this cab... it's made by buzz_lightyear.... very nice icon.. better than the MS' icon
cool dude
thanks
PapaDocta said:
try this cab... it's made by buzz_lightyear.... very nice icon.. better than the MS' icon
Click to expand...
Click to collapse
is there a file description for this cab?
whats the diference between this and switch_it by Buzz?
i tried the BT update from Imate it worked ok for about 5 hours then after a soft reset it made my BT icon go grey( unactivated aswell) if i switched my Jam off then on the the icon would go blue but i would be back the initial problem of no hardware.
Speedn
@Speedn > Is this you're looking for ? >> Here << :?:
ahh yeah thanks docteurN... i did search but didint see that one.
Nice work Buzz!!!
Thanks
Speedn
DocteurN said:
@Speedn > Is this you're looking for ? >> Here << :?:
Click to expand...
Click to collapse
Yeah, I got the grey icon after the BT Patch also. I'm running "BT Tools" and "Switch It" so I uninstalled them, deleted my BT association with my laptop and reinstalled the Patch, BT Tools, Switch It and made a new association with my laptop. 2 soft resets later, it appears that everything is working properly. I think the best thing to do is just upgrade to the new 1.11 firmware. When imate came out with the camera patch, I never did get the same results as I did with the 1.06 firmware upgrade.
Test the patch on RADIO 1.00, So NICE. It work very well
andyhe said:
Test the patch on RADIO 1.00, So NICE. It work very well
Click to expand...
Click to collapse
didn't know there is a 1.00 radio version
Hi all,
I tried it on my 1.11 WWE, but without success!
I still get the error most of the time.
Related
Here is a backup of the current rom, taken from a brandnew MDA 1 with WM 2003:
http://www.mathiaspohl.de/mda
Release Number is 4.00.33
Taken from a brandnew MDA I with WM 2003.
This release also includes the Wireless Modem feature.
regards,
Very nice of you to share it, but the link didn't work for me. Only empty page with broken Image....
Regards
Stefan
the link is ok (now?) ! i just downloaded the file...
trying to update now...
Jabba
the url dont work with browsers like opera
but it works ok with IE6
it says incorrect filesize when using OSImageTool to upload ?!?!?
Try XDArit
This is only the CE part of the device, not the bootloader.
Try to create a SD image using XRArit. Working fine for me.
regards,
PS: Aaaaaaaah, yes, sorry for the IE 6 based page. The site was not designed to share files, just pic's for some friends.
got it to work....
start OSImageTool with -f in commandline.. (no filesize checking)
Yeah WM2003 german, thats what i waited for... so no need for XDA2!
Thanks a lot !!!!
Jabba
Can I use English language instead of German language with this ROM backup? Thanks.
....no.
No, there is now way to switch from one language to another.
This file is just a backup of the current production release, shipped with the MDA 1 in Germany.
Last week, T Mobile announced (press release) the availability of a "public WM 2003 update" for the MDA 1 for the middle of december.
regards,
can you please tell us if you have an updated MSN and other improvements ?
any SD erasure ... ?
thanks
decebal
Anyone other get it working?
OSImagetool did not accept option -f for me.
Hope for more hints...
Regards
Stefan
Edit:
Sorry, was my fault. Didn´t know that there was an newer version of the OSImagetool. Now i was able to copy it to my SD-Card.
Just in the moment i´m flashing my device (Hopping not to have to call the insurance after... ;-))
Hi,
just wanted to tell that it's working fine on my MDA1 (32MB)
Now I'm just waiting for a kitchen-update which can be used with a german ROM
Bye for now,
Dennis.
TOMTOM Navigator 2 Version 2.24
TomTom Navigator does not work with this ROM
Back to PC 2002
Or has somebody an success Story?
CU Jason0815
Don't know if you're using TomTom or TomTom2, TomTom2 is working fine with mine
The only thing im mad about is the illumination of the MDA, it's not working again, and for making it work again I have to reset the MDA, sometimes it needs a hard-reset becaus the MDA is hanging up while booting after a softreset...
Anybody's got an idea of whats going wrong?
Bye,
Dennis.
zork66 said:
Hi,
just wanted to tell that it's working fine on my MDA1 (32MB)
Now I'm just waiting for a kitchen-update which can be used with a german ROM
Bye for now,
Dennis.
Click to expand...
Click to collapse
Hello Dennis.
Which Software do you want to have in your ROM.
Played a little bit with the kitchen and teh rom, and it looks quite good.
At the moment there a just a view problems with some programs added in the kitchen. (For example PocketNav created a shortcut in Startup and not in Autostart....)
Maybe I'm able to cook you your own ROM....
Best way will be sending me a PM...
Regards
Stefan
LumpiStefan said:
Anyone other get it working?
OSImagetool did not accept option -f for me.
Sorry, was my fault. Didn´t know that there was an newer version of the OSImagetool. Now i was able to copy it to my SD-Card.
Just in the moment i´m flashing my device (Hopping not to have to call the insurance after... ;-))
Click to expand...
Click to collapse
Where can I found this newer version?
On xda-developers.com is only a version without the parameter -f.
Thanks
Take a look at here
http://www.xs4all.nl/~itsme/projects/xda/OsImageTool.html
zork66 said:
Don't know if you're using TomTom or TomTom2, TomTom2 is working fine with mine
The only thing im mad about is the illumination of the MDA, it's not working again, and for making it work again I have to reset the MDA, sometimes it needs a hard-reset becaus the MDA is hanging up while booting after a softreset...
Anybody's got an idea of whats going wrong?
Bye,
Dennis.
Click to expand...
Click to collapse
I use TomTom2 no sucess, but i had no problems with
the light! Tomtom is showing the circle (PowerPc Sandwatch)
infinitly. Only Software Reset helps.
I tried TomTom2 Version 2.24 with GPS 2.05
Cu Jason
Jason0815 said:
zork66 said:
Don't know if you're using TomTom or TomTom2, TomTom2 is working fine with mine
The only thing im mad about is the illumination of the MDA, it's not working again, and for making it work again I have to reset the MDA, sometimes it needs a hard-reset becaus the MDA is hanging up while booting after a softreset...
Anybody's got an idea of whats going wrong?
Bye,
Dennis.
Click to expand...
Click to collapse
I use TomTom2 no sucess, but i had no problems with
the light! Tomtom is showing the circle (PowerPc Sandwatch)
infinitly. Only Software Reset helps.
I tried TomTom2 Version 2.24 with GPS 2.05
Cu Jason
Click to expand...
Click to collapse
Maybe you have to upgrade your GPS-Version. Latest is 2.08. Don't know exactly which version supports WM2003
HTH
Stefan
Re: TOMTOM Navigator 2 Version 2.24
Jason0815 said:
TomTom Navigator does not work with this ROM
Back to PC 2002
Or has somebody an success Story?
CU Jason0815
Click to expand...
Click to collapse
Jason,
there is no need to downgrade to 2002.
Just upgrade to TomTom 2.04 adn GPS 2.08, format your SD Card and re-install the maps. Try to start without any additional POI files.
This should fix your problem.
After this, the TT 2 was running fine on my MDA with this ROM.
regards,
Hi, has anyone figured out what the difference between the i-mate Radio v1.05.00 WWE and the v1.1.0.00 US is ?
Any one using the v1.10.00 outside the US ? Any problems or hints ?
Torsten
hey,
As far as i know, the (1.10.00 radio version) is meant to be used only in the US, or at least on 850 networks. so i guess u can't compare these two.
Sozon
sozon said:
hey,
As far as i know, the (1.10.00 radio version) is meant to be used only in the US, or at least on 850 networks. so i guess u can't compare these two.
Sozon
Click to expand...
Click to collapse
hmm, i upgrade to 1.10.00 usa radio and its fork fine!
i use it at european gsm (russia, dalsvyaz) standart 900/1800.
but i don't know which things changed
anybody knows ?
where to get it and i will give it a try... we use here gsm 900....
I wonder if this will fix the problem some of us are having with the 1.6 ROM upgrade with not being able to re-connect to GPRS without a soft reset or switching flight mode on/off. Any thoughts?
to many drinks on my side!
This is a quote from the i-mate
ROM builds with radio versions 1.05.00 and 1.10.00 all include audio enhancements for voice calls. They also contain the improved camera driver. We are working hard to deliver these new builds to our full suite of languages.
indicates PM10C, then the customer should upgrade with the North American JAM ROM Build.
If the model number indicates PM10A, then the customer should upgrade with the Generic Worldwide English ROM Build. You will not be able to install the North American JAM (850) ROM. This WWE build does not include the connection settings for the US operators found in the North American build, though these are all available to download separately from clubimate™.
@Mashie,
i have the same problem my gprs keeps disconneting on and off... sometimes it works for a few minutes and then start disconneting.... and i have to do a soft-rest to get it to work again....... does anyone else has the same problem?? or a fix?
@alexk,
Can you hear me now? can you hear me now?
Can you hear me now?
lool love those ads
@torklemm,
i installed the 1.10 radio and it's working fine... i felt a better voice quailty than the 1.05... and works in 900 networks fine
Where can we find this radio version? Can somebody post a link to it? Thanks
PapaDocta said:
@torklemm,
i installed the 1.10 radio and it's working fine... i felt a better voice quailty than the 1.05... and works in 900 networks fine
Click to expand...
Click to collapse
PapaDocta, how did you install it?
Do the usual, unzip and delete all .nbf's except radio.nbf?
Or is it more complicated?
thks all for sharing experiences, just managed to upgrade (only) radio rom to 1.10 (the JAM USA one). I used all the files except the NK_ , the ms_ and maupgradeut which I replaced with the maupgradeut_NOID that I downloaded from the ftp. USB connection in Activesync was disabled and I put my mini in bootloader mode before the upgrade...... and it went smoothly.
My network is also 900 and it works just fine.
Signal strength, comparing to 1.05 is the same, only it seems that the GPRS icon is always shown (when it's available) which was not the case with 1.05
here ya go... and my way of upgrading was i didn't disable anything just run the maupgradeut_NOID once and the device went into the bootloader mode and i got the country error i ignored it and run maupgradeut_NOID again without resting the device.. and all worked but i advice using the above steps cuz it has been tested before...... here is the files you requested and i renamed the maupgradeut_NOID to maupgradeut so don't panic ;-)
enjoy
Thanks a TON for this! I installed on my S100 and the GPRS now works perfectly. I can connect and disconnect without having to turn flight mode off/on.
-Mashie
Thanks man. Upgraded and working fine!!!!
Amaro
amaro_dj said:
Thanks man. Upgraded and working fine!!!!
Amaro
Click to expand...
Click to collapse
Hi,
I have started my uograde 10 minutes ago but it seem to be freezed...... :shock:
what I should do now?
thanks
fausto
It depends on how you are upgrading. If you are using the files in the .rar file that Papa posted then you need to run MaUpgradeUT.exe and it will put your device in Bootloader mode. Once you get the country ID error, I closed that window and ran MaUpgardeUT.exe again and the upgrade went flawlesly. Hard Reset to get out of BL mode and set your device back up.
Hope this helps...
-Mashie
Mashie said:
It depends on how you are upgrading. If you are using the files in the .rar file that Papa posted then you need to run MaUpgradeUT.exe and it will put your device in Bootloader mode. Once you get the country ID error, I closed that window and ran MaUpgardeUT.exe again and the upgrade went flawlesly. Hard Reset to get out of BL mode and set your device back up.
Hope this helps...
-Mashie
Click to expand...
Click to collapse
Wow, thanks Mashie for help. Now I have stopped the upgrade, I have restarted it and it seems to work, now there is a progress bar about at 50%.........hope to continue good......... :roll:
bye
Hi everyone.
Do I need to backup the RAM or ROM before upgrading radio's ROM?
Does the radio 1.10.0 USA means for O2 XDAII mini?
Thank you in advance.
Best regards
Arto
Artosoft said:
Hi everyone.
Do I need to backup the RAM or ROM before upgrading radio's ROM?
Does the radio 1.10.0 USA means for O2 XDAII mini?
Thank you in advance.
Best regards
Arto
Click to expand...
Click to collapse
if you want u can just backup ur data... cuz afte u upgrade the device will auto hard rest.... and you can use it on O2 XDAII mini shouldn't be a problem.....
if you don't have problems with ur current radio then don't upgrade... if you just curious then go for it.
good luck
Thanks papadocta.
Well, I am curius :lol:
Beside, I hope 1 extra bar signal strength (that reported by those upgraded to 1.05.0 WWE and 1.10.0 USA) will save my O2 XDA II mini's battery longer.
Is it correct that 1.10.0 USA is newer than 1.05.0 WWE? Because I read somewhere is not always true. Anyone can confirm?
Thanks again.
Best regards,
Arto
I have a strange problem. For no reason my O2 Mini S soft resets iteself. Any clue why this happens and how I can prevent it? Thanks.
Update the rom if it is a pre-aku2 rom. The older roms had a habit of doing this.
Thanks...
Thanks for the tip. Now this is what scares me have read some horror stories and some nice ones after ROM updated... so I am still thinking... :?:
Re: Thanks...
kull said:
Thanks for the tip. Now this is what scares me have read some horror stories and some nice ones after ROM updated... so I am still thinking... :?:
Click to expand...
Click to collapse
Should be a straight update if you use the latest o2 rom, no need to unlock your device if you know your never going to use non-o2 roms. V unlikely to have a problem if you go down this path.
Siemens SX66
I dont know how close these phones are to one another, but I have the SX66 and for the last week or so, it just out of the blue, will soft reset itself... It is Very frustrating... I have even done a hard reset back to factory specks,,, and it still does it...
I am totally lost here.
Re: Thanks...
Should be a straight update if you use the latest o2 rom, no need to unlock your device if you know your never going to use non-o2 roms. V unlikely to have a problem if you go down this path.[/quote]
Ok. Thanks for the confidence. I have downloaded the O2 ROM from their UK site, and currently my ROM says: ROM 1.1.7.5/Radio Ver: 01.08.10/ Protocol Version: 4.0.13.18/ExtROM Version: 1.1.7.105. I think this is a German O2 because the keys on the keyboard are of that layout. So will it be a problem if I upload a ROM from the UK site? Thanks.
On your device check settings\device info. If your rom ends in WWE then that is english then the one from the uk site will be fine. If it ends in GER then you need the german rom from the german o2 site.
Ok but...
OK but I don't see any of those abbreviations next to any ROM number... In anywhere else I can check? Thanks.
Re: Ok but...
kull said:
OK but I don't see any of those abbreviations next to any ROM number... In anywhere else I can check? Thanks.
Click to expand...
Click to collapse
I have not found anywhere else. But if your menus are in english it will be a WWE rom. Keyboard layout may be german but can be changed afterwards by a reg tweak if its a problem.
Re: Siemens SX66
Punisher102 said:
I dont know how close these phones are to one another, but I have the SX66 and for the last week or so, it just out of the blue, will soft reset itself... It is Very frustrating... I have even done a hard reset back to factory specks,,, and it still does it...
I am totally lost here.
Click to expand...
Click to collapse
Any assistance here???
Successful Upgrade but...
I did successfully upgrade to the UK version of the O2 ROM Ver. 2.21, but not there is a strange problem sometimes the phone just hangs after going on standby, I can see the greenlight blinking for the phone signal but it wont come back on when I press the power button. I have to remove the battery and then it restarts. Any solution to this problem or is it a bug? Thanks.
Hi all,
I currently have the HTC Tytn with the original ROM on it. I'm on Cingular's network, and am having the problem where the call either gets dropped completely or temporarily when the phone tries to "hand off" 3G to 2G. Are any of the radio-only upgrades that are on the ftp supposed to address this issue? I'm not looking to change the ROM. I'm currently on radio verion 1.03
Thanks in advance!
SP
I have a TyTn on Cingular as well. I upgraded to 1.20 radio ROM and haven't experienced any problems you're having moving to/from 3G areas.
Hi sf,
Thanks for the reply... are you also still on the original Tytn ROM as well? (for everything else but the radio...)
yes, i'm on the original HTC ROM, just upgraded the radio.
The best combination is the original HTC ROM + 1.16 RadioROM from what I have heard around ..
Great, thanks a ton guys. I'll give it a whirl.
gravejoker said:
The best combination is the original HTC ROM + 1.16 RadioROM from what I have heard around ..
Click to expand...
Click to collapse
I'm having much better battery performance with the HTC ROM and the 1.20 radio than I did with the 1.16 radio.
Goesto11, did you have any installation problems during or after the install with the 1.20 radio? I read a couple other posts where some additional tweaks needed to be made afterwards, but I'm thinking now that that was with the Cingular ROM.
Thanks,
SP
1.20 Radio was actually from the latest iMate ROM from what I remember .. might want to verify ..
latest Cingular RadioROM was 1.16 ..
Thanks GJ.
stpete111 said:
Goesto11, did you have any installation problems during or after the install with the 1.20 radio? I read a couple other posts where some additional tweaks needed to be made afterwards, but I'm thinking now that that was with the Cingular ROM.
Click to expand...
Click to collapse
Nope, no installation problems at all (follow the directions and you should be fine).
gravejoker said:
1.20 Radio was actually from the latest iMate ROM from what I remember .. might want to verify ..
latest Cingular RadioROM was 1.16 ..
Click to expand...
Click to collapse
Yup, it's from the latest i-Mate ROM
stpete111 said:
Hi all,
I currently have the HTC Tytn with the original ROM on it. I'm on Cingular's network, and am having the problem where the call either gets dropped completely or temporarily when the phone tries to "hand off" 3G to 2G. Are any of the radio-only upgrades that are on the ftp supposed to address this issue? I'm not looking to change the ROM. I'm currently on radio verion 1.03
Thanks in advance!
SP
Click to expand...
Click to collapse
I am wondering the same thing. I upgraded, but I haven't driven through any of the troubled areas yet. I guess we'll see on the drive home.
I'll install it today and report on it asap. A particular area that I go through on the way home from work attempts the hand off a good 80% of the time.
Oh yeah, one more (stupid) question...
If I install the 1.20 radio, then later end up doing a hard reset... after the hard-reset, will I end up with the original HTC radio, or the updated one?
Good question .. You will then always have an updated RadioROM .. even after a hard reset
Ok cool, thanks. I'm glad it was a relatively not-too-stupid question
gravejoker said:
Good question .. You will then always have an updated RadioROM .. even after a hard reset
Click to expand...
Click to collapse
Yeah, I did this yesterday. Your updated Radio ROM sticks with the device.
But what about installing an entirely new ROM; this overwrites the radio ROM right?
richy240 said:
Yeah, I did this yesterday. Your updated Radio ROM sticks with the device.
But what about installing an entirely new ROM; this overwrites the radio ROM right?
Click to expand...
Click to collapse
Yes, this is correct. A "normal/standard" ROM update will overwrite the System ROM, the Extended ROM, and the Radio ROM.
I can't seem to dowload a good file to unzip. It says "not a valid pocketpc app".
The ROM updates need to be run from a WinXP PC with an ActiveSync/USB connection to the Hermes...
and remember, Flashing can be a dangerous business, even if you know what you're doing... use at your own risk!
Hi there, can anyone help me to 'downgrade' my P3300. I've installed the official upgrade WM6, but I'm not happy with it... .
I'm looking for a good working WM5 downgrade.
THX Fred
Dear Fred sorry i can't help you because i need the WM5 WWE for my phone too! Pls ppl help us
just got the link on wiki xda developers
there are few old roms wm5 useful to get before an upgrade for rollback
Which WM5 roms are useful? -> Recently I found a ROM with the name: HTC_1.12.405.01_026790_WWE_SHIP.rar
Is this a WM Rom I can use for downgrading my device [P3300]?
And which procedure do I follow when trying to downgrade to WM5 ?
Pls help me !!
dear fred sorry was off for while i rolled back to wm5 but soon after this i decided i will recall wm6 back gain
i suggest u try wm6 for a while & soon you will see a big difference don't rush and get back to 5 yet a brother advice
i wasted my time to look for different roms bu the wm6 touch 3.01 in the forum is the best u will absolutely love it - just give it time mate
wm5 is no better than wm6 - in fact now i see lots of benefits of having 6 in my phone
best wishes
rollback
Hi, THX for your concerns , but I defenitely want to rollback to WM5, because I have a problem with bluetooth connection in he car[kit]. With WM5 it did work properly and since upgrading to WM6 it won't work!!
I've tried to 'downgrade' but the Artemis doen't want to go back to WM5. I've used USPL and then I tried to rollback, but everytime I try it won't go on.
Can anyone help me -> or what do I do wrong ??
hi again
its a bit weird that u r having bluetooth problems with wm6!! anyway the bluetooth and other wireless connections are something to do with the Radio ROM as i understand so you may benefit from changing ur radio rom!! it should be a quicker solution to implement i dont know if this will work but it worth a try
second when you try to rollback to wm5 are u using official rom - cuz it should be an official rom u rollback to - u can find official wm5 on the wiki xda developers
best wishes
one more thought before you do anything else did u reset ur carkit bluetooth before using it back again with ur wm6 cuz ur phone has a new BT address now
try resetting bluetooth in both and re-pair them
Hi Jahrami,
Tried you're advices, but don't work on my carkit. Earlier I tried to rollbak but that didn't work with the rom I have downloaded [HTC_P3300_1.12.405.101_WWE_ExtROM]. I've a Dutch P3300, which was upgraded to WM6.
I used USPL to prepare it for any ROM, but it won't go on.
Do you have any other advices or ideas? THX
Fred
Hi Fred (check ur personal messages too)
Three more suggestion to be tried:
1- change ur RADIO rom only to the latest
http://www.steadvex.f2s.com/orbit/RADIO_03.07.90_ARTEMIS.zip
2-change ur rom to another WM6 i think the problem with your rom not with the OS - try an official rom or artemis touch 3.01 i recommend the second
Artemis touch 3.01 http://forum.xda-developers.com/showthread.php?t=342298
fred107 said:
Hi Jahrami,
Tried you're advices, but don't work on my carkit. Earlier I tried to rollbak but that didn't work with the rom I have downloaded [HTC_P3300_1.12.405.101_WWE_ExtROM]. I've a Dutch P3300, which was upgraded to WM6.
I used USPL to prepare it for any ROM, but it won't go on.
Do you have any other advices or ideas? THX
Fred
Click to expand...
Click to collapse
Trial and [t]Error
Hi Jahrami, THX again. I'd already installed Radio 03.07.90, before I tried again in the car. But this doesn't work either. The carkit sees my P3300 and I can answer calls [as long as I answer via the knobs on my P3300!]. The speaking is then working via my carkit [at least].
But it doesn't work via the carkit-knobs ánd I can't phone out -> not via the
P3300 as well as the carkit !!!
Last thing I 'll try now is the Artemis Touch software and if this doesn't work I won't know what to do then?
Anyway I'll keep searching and trying!
Fred
waiting the last operation - Artemis touch
keeping fingers crossed
Touch not
Hi Jahrami,
THX for your help this far. But,...although I very much like the new looks of my Artemis now [with the Touch interface] -> My carkit won't respond well to it. Still got the same problem with Bluetooth, but much sleekier looks on my PDA now!!!
I'll keep on looking -> I'm now trying to find a way via the carkit radio [upgrading the kit probably?].
Fred
i was looking with you too for a solution but i ran out of ideas (will keep eyes open however)
told you - Touch is great (speed and look)
best wishes
fred107 said:
Hi Jahrami,
THX for your help this far. But,...although I very much like the new looks of my Artemis now [with the Touch interface] -> My carkit won't respond well to it. Still got the same problem with Bluetooth, but much sleekier looks on my PDA now!!!
I'll keep on looking -> I'm now trying to find a way via the carkit radio [upgrading the kit probably?].
Fred
Click to expand...
Click to collapse
fred107 said:
Hi Jahrami,
THX for your help this far. But,...although I very much like the new looks of my Artemis now [with the Touch interface] -> My carkit won't respond well to it. Still got the same problem with Bluetooth, but much sleekier looks on my PDA now!!!
I'll keep on looking -> I'm now trying to find a way via the carkit radio [upgrading the kit probably?].
Fred
Click to expand...
Click to collapse
Would it be possible to downgrade just the radio rom? not upgrade. I believe the issue is that wm5 used bluetooth 1.2 and on wm6 it uses 2.0. Would a downgraded radio rom help?
On Wm5 what kind of profile did your car kit have? was it headset or or handsfree? I have noticed that WM6 only has handfree. This may have something to do with it.;l
radio downgrade
Hi there, thanks for giving me another idea. Don't know if in WM5 it was handsfree or headset?! Mayby someone else can tell us/me!?
Can anyone provide me a Radio ROM or else that is the first version in WM5 -> so I can problably downgrade that part ?
Fred
I am having a lot of problems with the new wm 6, the previous software tomtom and igo8 are not working any more, both say that the GPS device is missing. Did you find a valid WM5 ?
Thanks