WM2003-SE on Wallaby revealed. - MDA, XDA, 1010 Software Upgrading

After long time of waiting, finnaly WM2003-SE revealed on Wallaby.
ROM VERSION: 3.04.00 ENG
ROM DATE: 06/12/02
Special thanks for LumpiStefan for his hard work.
Download the original version here with screen shots: http://forum.xda-developers.com/viewtopic.php?p=108170
or
ROM Kitchen: http://lumpistefan.dyndns.org/

Related

Problems with unlock program

I am trying to unlock my unit but when I run the program on my unit it states:
Start of repair process.....
DeviceIoControl('COM2:',0xAAAA5679L)
It sits at this screen and will not complete.
I have updated my ROM from Siemens so it is now running the Windows 2003 version with following Rom versions:
Rom version : A.30.09 ENG
Rom date: 01/01/04
Radio Version A.33.02
Protocol version: 1.3.3
Any help would be appriciated.
up to my info, XDAunlock tool works only with PPC2002 ROMs and especially that has wmodem.exe.
I would advice you to flash ur ROM with the developers SER v1.2 which will unlock ur device with the first booting.
later, u can upgarde again to WM2003

ROM for Qtek 2020i

I have a Qtek 2020i that has no ROM installed. The Qtek site is no help to me as I don't read scandinavian. Does anyone know where to download a ROM?
www.qtek.nl
Its is dutch, but it is a english rom.
www.my-xda.com has the rom on it, but you need to get into the bootloader somehow.
I think the FTP site here has it on as well if that doesn't work.
HTH
QTEK 2020i ROM upgrade
Hi AlimNassor,
As I try to access the ROM, the site asks for IMEI number and does not accept my number. I think the reason is that the pone is bought from USA. Will you please give the exact address of the ROM.
For Ex.: this is the address of the 2020
http://www.qtek.nu/files/RUU172752WWE.zip
I need the same for 2020i.
Regards
Stupid question really but here goes...
Is this ROM an english version as currently I have an XDAIIi with the new I-Mate PDA2 ROM installed onto it.
Is this ROM a newer version?? If so can I use it on my XDAIIi??
Take this: _ttp://www.qtek.nl/_BIN/AL_DT_WWE_11100_112_10200_Ship.zip
ExtROM version: 1.11.112 WWE
Prot. version: 1337.41
Radio version: 1.02.00
Date: 01/27/05
ROM version: 1.11.00 WWE
But I have the ROM for PDA2 on my Qtek2020i:
ExtROM version: 1.11.144 WWE
Prot. version: 1337.42
Radio version: 1.03.00
ROM version: 1.11.00 WWE
_ftp://ftp.clubimate.com/PDA2_WWE_11100_144_10300_ship.exe
Thanks for the reply, Yes I too have the ROM for i-mate as yours above.
Do you think when o2 release their new ROM for the XDAIIi it will be an improvment over the I-Mate version??!!
ROM links
Koldun, Thank you for the reply. I will try both. Regards.

new xda IIi

hi guys I've just got my first XDA and wanted to ask a quick question about upgrading.
i'm running ROM 1.11.00 WWE
RADIO 1.00.00
do i need to upgrade? where from? and how?
thanks in advance
HI Fox
There are currently 2 upgrades availabl.e You can upgrade from the following link.
Qtek http://www.qtek.nl/_BIN/AL_DT_WWE_11100_112_10200_Ship.zip
ExtROM version: 1.11.112 WWE
Prot. version: 1337.41
Radio version: 1.02.00
Date: 01/27/05
ROM version: 1.11.00 WWE
Imate ftp://ftp.clubimate.com/PDA2_WWE_11100_144_10300_ship.exe
ExtROM version: 1.11.144 WWE
Prot. version: 1337.42
Radio version: 1.03.00
ROM version: 1.11.00 WWE
Then use winrar or winzip to open
regards
Dhruv
I use the latest cooked 02 Rom which has been modified to include Radio ver 1.03. You can download this from the xda-developers FTP. After install and it re-boots, select corp install, enter code 0506 within 3 seconds, the corp ver doesn't install 02 Active UI stuff. To automatically install your Mobile Operater Settings, goto this link. http://forum.xda-developers.com/viewtopic.php?t=26463 Download the correct cab, copy to your pda, tap to install GPRS/WAP/MMS.
Hope this is of some help.
Mobile operator link
Sorry, I didn't realise that you were not from the Uk, if you do install corp mode, let me know your Mobile operator and I will try to locate the correct cab file to install your GPRS/WAP/MMS for you and I will upload it to the link in my previous post. :lol:
cheers guys, yes i am from the uk. i'll give it a go this week! thanks
Unable to run the ROM update? Any Assistance
dhruvkataria said:
HI Fox
There are currently 2 upgrades availabl.e You can upgrade from the following link.
Qtek http://www.qtek.nl/_BIN/AL_DT_WWE_11100_112_10200_Ship.zip
Imate ftp://ftp.clubimate.com/PDA2_WWE_11100_144_10300_ship.exe
regards
Dhruv
Click to expand...
Click to collapse
Hi Dhruv,
I've downloaded both files and run the upgrade. Unfortauntely, it fails at the verification stage where it halts with:-
Error 120:- Country ID Error
Any help?
The reasons why I am upgrading is the phone does not RING when it receives incoming calls. I need to do a soft-reset for it to work. However, after a while, the stupid phone become mute.
I am sick and tired of this buggy unit.
Any help will be greatly appreciated.
Thank you.
Hello, Victortan!
After getting Country_ID error, just try to run MaUpgradeUt_noID.exe one more time.
Good luck!
Hi Slash, have finally upgraded my 2i uisng the modified ROM update at the FTP site.
You are right. Need to run MaUpgradeUt_noID.exe one more time.
Thanks again.
Have also solved my "no-ring" tone problem. Apparently it is caused by the Wisbar utility programs that I've installed.
Cheers.
PDA2 ExtROM 152 ITA
Hi guys everybody,
I'm from ITA
I get a PDA2 imate in hot Saudi Arabia with:
ROM version: 1.11.00 WWE
ROM date: 01/27/05
Radio version: 1.03.00
Protocol version 1337.42
ExtROM version: 1.11.153 Arabic
I download from I mate site:
PDA2_ITA_11104_152_10300_ship.exe and discover that i can't upgrade in italian language. why? copyright of distribution! may-be! no reply from support I-mat.
all guys U believe that runnig one time MaUpgradeUT_NoID.exe I can able to install:
ROM version: 1.11.04 ITA
ROM date: 01/31/05
Radio version: 1.11.00
Protocol version 1337.42
ExtROM version: 1.11.152 ITA
and all next italian updating?
have good days everybody....
[/code]

Need Advise

I updated to Jesterz's ROM a while back. Then reverted back to QTEK's ROM since I couldn't use the DOPOD ROM anymore. Here's the info:
ROM VERSION: 2.20.7.34 WWE
ROM DATE: 7/10/06
RADIO VERSION: 02.47.21
PROTOCOL: 4.1.13.24
EXTROM VERSION: 2.20.7.114
IPL: 2.15.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.34
I do not like the Qtek ROM as much as Dopod's and I found this post on PDAMobiz's site (which took forever to DL) which included five files: 1). EnterBootloader.exe 2). nk.nbf 3). ROMUpdateUtility_No_VenderID.exe 4). RUUGetInfo.exe 5).RUUResource.dll
It's under the thread: hXXp://en.pdamobiz.com/en/forum/forum_posts.asp?TID=444&PN=1
There are no explanations in the thread. But does anyone have any info or experience with this ROM to let me know if I can successfully update back to Dopod's ROM without damaging the phone permanently.
Didn't Work
I took the leap and tried the ROM upgrade. However, it didn't work and now the Dopod 818 Pro is stuck in Bootloader mode. If someone has the latest Qtek ROM, I'd appreciate it if you'd send me the file. Thanks.
best ROM
So, which ROM is my best bet for a Dopod 818 Pro that has a SPL 2.20.0001? I tried ASERG AKU 3.3.11 update but it didn't work with this pda. Any suggestions is appreciated.

somebody help..

I have dopod 818pro
before upgrade to PDAViet 4.0.0.0.6
i use 4.0.0.0.4
this is ROM before upgrade to 4.0.0.0.4
Dopod 818 Pro ROM Code (2006/4/25)
ROM version: 2.15.13.27 WWE
ROM date: 03/09/06
Radio Version: 02.19.21
Protocol Version: 4.1.13.09
ExtROM version: 2.15.13.121
i follow instruction how to upgrade WM6, it says that i have to downgrade AKU2.2 first then second way i downgrade with prophet_PV_temp but nothings change.
my question is:
1. why my splash screen is change to Qtek (not dopod-enjoy mobility anymore)
2. any idea how to change back to original one? how?
IPL 2.15
SPL 2.20.0000
GSM 02.47.21
OS 4.0.0.0.6

Categories

Resources