Everyone who talk about getting the cell id and lac must also know this
TinyGPS software, and i am one of them.
Unfortunately, i haven't successfully get the cell id and lac.
Though i read a lot topics in this forum and a lot articles that i find by using
google, all of my tries are failur.
So i decided to find out why TinyGPS work well on my smartphone while
my program even can not open com:2 port.
Then i find that after you installed TinyGPS, it will also install a file named
tinygps.dll which is actully a serial port driver, and it will also change your
default com:2 driver to this tinygps.dll by modify your registry key. I think
that is why after you install TinyGPS you have to restart your smartphone,
because the new registry setting have to take affect.
So i wonder if i can write a serial port driver just like tinygps.dll. But i only
develop applicationes for smartphone before , not the hardware driver.
I think this will not be a easy task, and i am here calling for help.
Did anybody know how to write a drive for com:2 (gsm modem)?
or at least someone is interested in writing one with me?
BTW:can someone send me a copy of serial2.dll which xda used as the
com:2 driver, maybe i can replace my original one with serial2.dll , and
find if my program can open com:2 port then.
my email : [email protected]
MSN:[email protected]
Thanks a lot.
Related
I have a utility that i can use to clone an XDA via an SD card. This works great for quickly producing lots of devices with the same config. However, it also makes the "Device ID" the same on each device.
I know you can rename the Device ID, not a problem. The problem comes that although the device ID name (text) is different, the names within the registry are not.
I am basicly looking for a way to give the device a new SID?
does anybody have a utility for this? Its causing me a real problem with my management software.
Thanks
Resolved.
Problem was a .ini file in the storage location
Hi Noodleman
I am looking for some software to achieve the same thing.
Can you tell me what you use ? (Plus give me some tips on how to use it)
I would really appreatiate the help on this !
Hi!
I'm a new windows mobile user, developer by trade. I have a need for an application that will intercept a dial attempt from contacts or smart dialing and apply some re-write rules to the number then proceeding with the dial as normal. I've not found such a program for WM (I use TakePhone to do it on Treo 650) so I decided to try to write it!
This is for Windows Mobile 5 (on a wizard, if it matters).
I'm a Java developer, and rarely use Windows so I'm not so up on the technology used for this kind of thing, but no matter. I orderd the Windows Mobile 5 developer thing from MS and have it all installed. Using the managed code Microsoft.WindowsMobile.Telephony stuff I can dial a phone number. I suppose I could even add a menu to the contact that would specifically run my code and then I could use the Phone.Talk thing to place the call, however, I'd really like to enable the program and just have it work in the background when it is enabled.
First, can this be done with managed code? If so, how! Any input would be appreciated. Also, if you know of software that does this already, I'll just go buy it.
Thanks in advance!
this should be possible to be done with managed code, but the only idea I have now is hooking RIL.DLL or COM-port communications. And the easiest way to hook something - is to use C/C++.
Thanks for the reply! I've done some searching on RIL and RILGSM and found minimal info regarding "hooking" it. It seems that the person most likely to have done it is "itsme" who has posted a bit of information regarding the entry points and functions available in said DLL.
I'll keep looking...
Most of us are already aware that PPC and smartphone edition are similar enough to be mostly compatible in their apps across the platforms.
That is, with enough coaxing and the help of input simulators like SPHelper, I've managed to run almost any Pocket PC app on a smartphone device.
Well, until now.
I've officialy run into my first brick wall of sorts, and I'm hoping someone here can shed some light onto the situation.
Since the MS implementation of A2DP has quality issues, I'm trying to run MSI Blueplayer app ( found at http://cweb.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=619&kind=8) on a smartphone.
Analyzing the cab, I extracted 4 .dll's that go in the \windows dir (msibtstk.dll, msibtapi.dll, CHS.dll and TW.dll), and two .exe program files that go in program files\msi\blueplayer (STLoader.exe, and MPOBCE.exe).
Now, normally its as simple as running the .exe, at least it always has been in the past.
However, every time I hit MPOBCE.exe, all I get is:
"Alert
Can't find MPOBCE or one of its components. Make sure the path and filename are correct and that all the required libraries are available."
Just to control this experiment, I copied the exact same files over to a PPC device and ran it to find that it DOES work.
Now, I've never encountered PPC specific code before- in fact, I didn't even know such a thing was possible. Has anyone see/heard of this sort of thing before?
Can someone help me take this apart and find out what makes it work on a PPC only? Perhaps a PPC-specific path (if there is such a thing)?
At this point, as much as I'd like to get this working, I'm just as much intellectually curious as to what would cause a program to only operate on a PPC installation.
Hello Dishe.
Your problem is simple: Certain DLLs that come built in Pocket PC version of windows mobile do not exist in the Smartphone version. An example is MFC DLLs.
What you need to do is get hold of 'dependency walker' which is a neat little app that MS incorporated in to VS 6 (though I understand it was written by an independent developer and should be available separately).
It will show you exactly which DLL files each exe is linked to. You then have to get a good copy (from a ROM dump) of the needed DLL and put it in windows directory.
Hope this helps.
That's a great idea. Thanks! I never heard of the dependency walker before, but it sounds like a perfect tool for this. I'll have to check it out on my office computer (I don't have VS 6 at home).
I wont be back in my office until wed., so if anyone had a bit of spare time, I'll attach the files here for someone to examine.
If anyone wants to look into it and tell me what dll's are required, I can get ahold of them from a healthy Pocket PC image.
Thanks!
This zip file has the two .exe's contained in the installation. I think only mpobce.exe is complaining about missing components, though.
Oops, apparently I should have checked first...
Dependency Walker is a free app. I downloaded it and tried it out.
It lists a bunch of .dll's, most of which I had on smartphone.
However, the two missing ones are:
mfcce300.dll
olece300.dll
Now, I'm not exactly sure what these do, so I need to look into it some more. Does anyone have any clue what these are for? If I copy them from a Pocket PC, will they operate on a smartphone?
Hi Dishe.
I guess I should have been more clear: Dependency Walker was written as freeware by an independent developer, but M$ liked it so much they decided to grab it for VS.
Any way, mfcce300.dll is MFC version for PPC (if you are not familiar with MFC, it's a collection of "ready code" that simplifies writing apps in c++)
It comes built in for PPCs but not for smartphones for some reason. If you have a good dump check that DLL with dep. walker as well, I am pretty sure it is linked to a few others.
olece300.dll - is a COM support dll. I won't even go there because I really hate COM (that's Component Object Model, not com port) and I am really not sure my self what the DLL does.
If you do get a good version of those two you should be able to get the app running.
levenum said:
Hi Dishe.
I guess I should have been more clear: Dependency Walker was written as freeware by an independent developer, but M$ liked it so much they decided to grab it for VS.
Any way, mfcce300.dll is MFC version for PPC (if you are not familiar with MFC, it's a collection of "ready code" that simplifies writing apps in c++)
It comes built in for PPCs but not for smartphones for some reason. If you have a good dump check that DLL with dep. walker as well, I am pretty sure it is linked to a few others.
olece300.dll - is a COM support dll. I won't even go there because I really hate COM (that's Component Object Model, not com port) and I am really not sure my self what the DLL does.
If you do get a good version of those two you should be able to get the app running.
Click to expand...
Click to collapse
Thanks for the help, I'm realizing there's a lot more to this I should have known before embarking on such a task. I've never had such a problem doing this before, I guess MFC isn't so popular!
Anyway, I need a good ROM dump, I haven't been able to aquire one. In the mean time I tried some files I found searching google... didn't expect it to work, but tried it anyway. Still complained of missing files- you're right, I'll bet MFC is calling more dll's as well that I need.
Perhaps there's hope...
You were right... I just needed more .dlls!
I found a whole series of .dlls required by mfcce300.dll that my smartphone was missing, so I put them all in the program directory and it opened!
Problem is, its not so stable... the files were pulled from a ce.net-4.1 set of files since I don't have access to a wm5 rom image.
One more thong I should have thought about earlier:
Some COM dlls, maybe even olece300.dll have a function called DllRegisterServer that writes them to registry as COM provider (under HKCR\CLSID).
Check to see if I am right using Dep. Walker and if so try to get regsvr32.exe or something similar for the PPC. (On a PC you use regsvr32 somedll.dll to register a COM server)
This may help with stability issue.
Hi. I am writing a freeware social networking application based on location services ( http://www.fightersoft.ro/mts/index.htm ). Although many devices are supported, it seems that the HTC TyTN isn't. To that end I acquired one and now I am on the quest on getting the cellid in my application.
The approach that should of worked was the COM port. However, no matter what COM port I open, I get a create file error. I am guessing that maybe the internal modem uses a weird port name such as COM550 or other letters instead of COM. I know that another way of getting the cellid is by using ril.dll (or even getting the handle to the gsm modem com port). However, in WM5 this is not documented at all on msdn.com - BUT for WM6 there is documentation.
Firstly, I want to ask anyone if they have extra information about this issue and secondly if by upgrading to WM6, the using the COM port approach works from the box (usually COM9)?
hi, I tryed many programs, which have actually support for cellid information, but no one work on herm, no matter if it was WM5 or WM6. on all phones, I had before it worked correctly... phone alarm also have this functionality, but shown only something like 00-00...
This is so frustrating. Every mobile device with GSM capabilities has a GSM modem insinde. That modem SHOULD be accesible from the OS by the means of COM ports. My guess is that this port is hidden or under a different name than the rest of the HTC devices where it resides on COM9.
CommMgrPro shows Cell Id and Location Area Code correctly on TyNT
I started this thread in the hopes that people will contribute with ideas towards getting this task done. Can you reveal any technical information on how you get the cellid information?
stargatesg1 said:
I started this thread in the hopes that people will contribute with ideas towards getting this task done. Can you reveal any technical information on how you get the cellid information?
Click to expand...
Click to collapse
Sure. Ril.dll gives you access to this information and works properly in WM5-WM6. And technically is easier than manager serial drivers......
Documentation isnt included in WM5 so it isnt "official" but realky It is included. The only problem for "not official" issue is you wont get support from microsoft....
Ask me what you want...
stargatesg1, if you have searched the forum, you'd already have the answer. For instance, this thread:
http://forum.xda-developers.com/showthread.php?t=280476&highlight=cellid
has a reference to RIL API. And I do remember I told you this some months ago in your another thread...
Here it is:
http://forum.xda-developers.com/showpost.php?p=1040464&postcount=27
It was at October 26 last year!
Basically I only need the cellid and the lac. I found that msdn.com offers documentation for ril.dll for WM6. This also works for WM5?
From what I learned from msdn.com is that I should do a ril.initialize first and then I should get the cell info using a fuction that I can't remember right now. Is this approach correct?
Lurker0, I know about this approach (I have mentioned it in my first post) however, I need more information because c++ native is not my primary envoirement for developing. That's why I kept searching for a way of getting the lac-cid from com ports so that I could do it directly from managed code.
stargatesg1 said:
Basically I only need the cellid and the lac. I found that msdn.com offers documentation for ril.dll for WM6. This also works for WM5?
From what I learned from msdn.com is that I should do a ril.initialize first and then I should get the cell info using a fuction that I can't remember right now. Is this approach correct?
Click to expand...
Click to collapse
Exactly. I downloaded Platform builder to have includes and libraries.
1) Initialize Ril
2.a) Request Position explicitally using a RIL_gettowerinfo
2.b) When you initializa Ril you can pass a callback to be notified upon location changes....
Did you read the source code for RIL interface that I pointed you to?
danielherrero, I see. Regarding the callback function is not neccessary in my app - the user or the app set on auto mode searches for changes in location. Thank you very much for your info.
Lurker0, yes I did, but like I said, I am not a very experienced c++ programmer and I need some documentation to get me started. I am also very greatful for your help and I am sure that I will use information from rilclass.cpp.
Thank you both, I will post back with the results as soon as I will have any.
Good luck
Hi StargateSG,
Did you succeeded in getting MTS working on Tytn?
Rgds
I had to leave the country on a business trip. I'll get back in a few days and I will start working on the problem.
danielherrero said:
CommMgrPro shows Cell Id and Location Area Code correctly on TyNT
Click to expand...
Click to collapse
Does nothing on the Blue Angel.
Greetings,
sorry to post again, but it seems that i posted in a wrong place (htc hd2 forum), because this post adress a wm software development.
So, this is the problem : I'm stuck with my old BK600 (com one, but omiz and freedom kb rebranded)
There are new keyboard (expensive), news driver (not working), future drivers (never going to be released), so as i'm a software developper, i wasn't really glad to abandon and to buy another. The problem is that've never made a driver for windows mobile, and i'm not specialized on bluetooth, so be indulgent...
After searching internet and seeing some articles, i've been on broadcom site (they're doin' the bt stack, so it's normal to go on their site ... guess what ...
i've downloaded the bluetooth stack sdk)
As i develop under linux, but also under windows, i've a visual studio 2008 installed. I compiled the Spp (probably serial port) sample, and without any driver the keyboard paired, negociated a serial port and the monitor show byte received when typing on the keyboard.
So now, if someone know some place to find tutorials to write windows phone driver, i take.
I also would like to discuss about another approch.
What would you think to transcode the keyboard code received in a thread and to redirect them on standard input ? would it be possible ?
Anyway, my needs are very simple, just a bluetooth kb to type on it, no extra functions, ...
Regards, and thanks you for your answers and help.
CLS.
Hi, it seems that there already is such a software, see:
http://www.youtube.com/watch?v=dLRXSBcu6WI
It is stated that it also supports bluetooth keyboards and mouses.
HI radhoo,
they seems to have a problem to release the software (5-6 month they say they're going to), but nothing
on this page : http://www.teksoftco.com/index.php?section=blueinput&tab=download
you click on this link http://www.teksoftco.com/index.php?section=blueinputbroadcom
and you get on this broken page :
http://www.teksoftco.com/index.php?section=blueinputbroadcom
as you see on the xda-forums
http://forum.xda-developers.com/showthread.php?t=628538&page=2
we are a lot to wait for this software, but nothing.
that's why i'm trying to do a little piece of software (which i'll consolide after i think)
I'm taking the base of the broadcom/widcom stack, and my approach will be to transcode chars to stdin.
It seems that there is a C# wrapper, so it think that i'll recode in c#
anyway,
thanks for answering and long life to xda-dev (very useful)
Ludovic.
work status
- have found a c# wrapper of widcom dll (recompiled) : works bu ti'm rewritting some part of the wrapper as it seems to lacks some feature
- in parallel : working on c++ legacy broadcom sample (works perfectly now with my keyboard, bind with com port done, receiving "things"
now struggling with threads to pump messages and transcode.
If you have something that gets the basic keyboard working, I'd love to test it out.
if your driver is ready for testing, please send me a beta of it for testing on my htc hd2
thanks
I have a same problem .
CLS have u finish your program already? please
I would like to use BK600 on my htc hd mini too
hi, how far did you get?
still at it...?
lots of succes, vicenza