Related
For some odd reason my T-Mobile PW10B1 (as labeled on the back of the device) is identified as PW10A1 in Device Information. I never paid any attention to that, but I got an error 012 when trying to upgrade to T-Mobile W2003. I'm currently running 3.17.03 (the XDA-developers Special Edition ROM v1.2), so perhaps prior upgrade affected the stock ID change from B to A.
How do I change it back to PW10B1, or how do I go about installing W2003 on my messed up device.
Thanks,
Marcin
Marcin,
i have the same with my AT&T. however i'm able to upgrade it to WM2003. the only thing confusing me that after upgrade it is stuck on splash screen, no further load. i tried different methods and versions... no results...
if you find the answer, please let me know
I can fix the problem!
Marcin, all you need to do is get an sd card and reader writer, you can then do the sd method of flashing which bypasses version checking. You will need xdatools also, just pass your mouse over xdatools link and you can download it from there.
very helpful
Nice advice, cgigate...that was very helpful...
cruisin,
I am in the same situation as marcin.
Please confirm my understandingof the bootloading from SD:
1. Using the SD+card reader, I copy the W2003 NK.NBF file to the SD.
2. Insert the SD card into the XDA
3. Goto the bootloader mode (power + soft reset) and press the middle of the rocker key.
4. After the ex counter increases.. at the end, press hard reset.
5. After 60 sec press hard reset again
If this is correct then why do I need the XDATools for?
Copying the file to sd will not work, it needs to be in a special format for the xda to boot the rom burning procedure, you will need xdatools. At the end you push the unscrewed end of the stylus into the tiny hole bottome right of xda, then again after 60 seconds and you should have a working system.
cruisin-thru
Thanks cruisin-thru.
I want to be very clear before starting the upgrade, so..Do I use the OSImageTool to special format for the XDA to boot from the SD?
Thanks again for your patience!
BTW: I did steps 1 to 4 of "unlock Wiz/Wallaby/SER/Backup and
now I (like marcin, have my T-Mobile PW10B1 identified as
PW10A1). I have yet to do the steps 5, 6 and 7. If I do these
steps. Will the identification be corrected?
so..Do I use the OSImageTool to special format for the XDA to boot from the SD?
Click to expand...
Click to collapse
yes after osimagetool have copied the rom to the sdcard the card should be unreadble to anything but the xda's bootloader
Upgrade to W2003
It is my great pleasure to have great and helpful people who advised and suported me in my XDA fiddling adventures. I have now upgraded to W2003 and unlock my phone to use any provider I wish.
Thanks to all!
Melody
Help me please !!
I have a XDA PW10A1 without the instalation cd-rom where do i find the drivers for my XDA ....... please help me !!!
Valikos, the only installation you should need is activesync which is freely downloadable from the microsoft web page.
Yes but!
If i have Win98 SE my computer do not see my xda , there are not drivers for 98 ? ....
Just make sure you have the latest ActiveSync version which is 3.7.1 ... sometimes uninstall then re-install solves this issue.
ok .. another question .... i have all my contacts in to a motorola accompli 008 and like the xda i don't have the instalation cd and no drivers , where do i find the drivers for this one , because i have more that 200 contacts in this one and i wold like to transfer all contacts in the xda
OK I have the tmo PPC its already got 2003 on it and I know the loader is 5.15, other info that might be needed.
ROM 4.01.16 ENG
Radio 6.25.02
OK I want to get my own cooked ROM onto this, I know I know use the SD card method, well I don't have one and after getting this thing can't get one for a while either. I have the cradle that it comes with and have put software into etc, I have tried some unlock ROM software to find it didn't work etc etc. after cooking ROM and running it it tells me in a DOS window:
Error getconntiontype - An Existing connecitonwas forcibly closed by the remote host.
error getting connectiontype
so basicly I need to find a way to get this into my PPC via activesync or something. sorry for bad post a little tired but I think people will understand and be able to help me or tell me I need SD card and wait until I get one.
I think you can use xdatools to flash the rom direct from xda memory, choose the nbf file as source then choose the xda device memory as destination from the drop down box in destination section.
OK tried that but can't access the PPC with xdatools so that won't work. thats for trying though.
TMO ROMs are known to resist exe flashing ... use the SD method and you are lucky to have the boo loader 5.15
Well glad to know that my boot loader is a good one, now to find a SD card I can borrow to do this with, should I use a 32 or 64 or does it really matter as long as it holds the file.
64 megabytes is needed really, I have had a problem with 32 meg, it looks like it is programmed but when i flash it there is always a problem.
macgyver33 talked about having a 2003 version. Can anyone tell me where to get it? I mean european one (900-1800 MHz). Or at least the PDA part of it? And yet haven't found quiet an exact explanation of "SD method" - any suggestions? Thanx a lot!
Bootloader v.5.17 locked
BL v.5.17 + TMO ROM. I am not able to downgrade the bootloader or change ROM.
I've tried using:
Cooked ROM.EXE - No way
(Error: GetConnectionType - An existing connection was forcibly closed by the remote host. Error getting connectiontype)
XDA OS Image Tool - No way
(Error: Same as above)
ITSTools - pnewbootloader - No way
(Error: Unable to find flash info offset, cannot disable bootloader writeprotect)
SD Method - No way
In bootloader mode (soft-reset while pressing on/off button), I have no options: Even with an SD card with OS image inside, there's no way to start ROM download as there is no option to choose...
Any idea?
Thx
Check this thread
Thanks Biso007.
No way. My XDA doesn't load the bootloader in a proper way:
1. Inserted th SD card in his slot
2. Answered "No" to format the card
3. Soft-reset while pressing on/off button (so to enter in bootloader mode)
4. Display turns off
5. No Wallaby Bootloader screen, so no action to take...
6. Wait... Nothing.
7. I've also tried to press the "Action" button so to start the SD downloading... Nothing
8. Wait... Nothing.
6. It needs another soft-reset to exit this state (a not working bootloader mode, I suppose)
7. It turns on "normally".
Any further idea? :-(
Thanks
if I'm not wrong, I couldn't see that you ran the 5.17 patch first ... without it your device will never detect the SD file ... chech the thread again
Hi, I searched a lot on forum and found a way for flashing from sdcard in Hermes forum.
There for i took a RUU_signed.nbh file copied to the fromated SDcard
- renamed it to HERAIMG.nbh (similar to HERMIMG.nbh on hermes forum)
--> and put the phone in bootloader
--> it starts searching sdcard
AND THEN
--> a processbar appears and it says "Checking SD contents"
BUT
--> "Invalid Certificate" - press any key.
So there must be a way to flash from SD card.
I will try different RUU and tell more.
Someone wanne help?
It must be named
"HERAIMG.nbh"
then it stops on white screen saying: Checking SD contents
But i got
Invalid Certificate
AND when it is an official .nbh extracted from RUU_xxxxx
it stops for 5sec on
"Checking SD content"
but the processbar doesn´t change and then it goes to bootloader without changing anything.
????????????????????????????
I will test this method too, i saw some flash of SD hen going into bootloader mode, did'nt know there was an option like this i will post my experiences
I tried these two RUU nbh's:
- RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship
- RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship
I've firtstly formatted my SD card, then copied NBH file's to my SD and named them HERAIMG.nbh.
Both times there was only a statusbar that did not proceed loading, and my continues in bootloader after 3 seconds...
Also got the Invalid Certificate error when I copied the WM6 nb of ASerg and renamed it to HEARIMG.nbh.. what is this certificate? and can it be edited in a way so we can flash??
Talking about unbricking anyway, can Herald users use Platform Builder?? i read in a thread that you're phone has to have KITL, but i don't think the Herald has KITL.. Can anyone who knows for sure please tell?
The Dutchman said:
I tried these two RUU nbh's:
- RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship
- RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship
I've firtstly formatted my SD card, then copied NBH file's to my SD and named them HERAIMG.nbh.
Both times there was only a statusbar that did not proceed loading, and my continues in bootloader after 3 seconds...
Also got the Invalid Certificate error when I copied the WM6 nb of ASerg and renamed it to HEARIMG.nbh.. what is this certificate? and can it be edited in a way so we can flash??
Talking about unbricking anyway, can Herald users use Platform Builder?? i read in a thread that you're phone has to have KITL, but i don't think the Herald has KITL.. Can anyone who knows for sure please tell?
Click to expand...
Click to collapse
The .nbh are "signed" os files. you can generate these fiels by "nbhgen.exe" but i didn´t get it to work with an RUU - it allways says "image is corrupted" because it only contains OS.nb
when you extract an RUU_signed.nbh out of the RUU_xxx.exe it contaisn splash.nb, os.nb, extrom.nb, spl.nb etc.
That´s the certificate = the singend nbh
So that won't be an option I guess... too bad
but does the Herald have KITL in bootloader mode? if so, you could use Platform Builder to unbrick your phone.. that would be very very sweet.
And what is this mtty thing? should be some funky stuff to
The Dutchman said:
So that won't be an option I guess... too bad
but does the Herald have KITL in bootloader mode? if so, you could use Platform Builder to unbrick your phone.. that would be very very sweet.
And what is this mtty thing? should be some funky stuff to
Click to expand...
Click to collapse
MTTY never worked for me - but that could be my system. And KITL - i don´t know what this is. sorry.
I sent it to O2 and hope they will repair some minor bugs and also the booting problem.
Little thready about unbricking a Hermes with KITL + Platform Builder:
http://forum.xda-developers.com/showthread.php?p=1162054#post1162054
Hmm i'll have a look around to find out what this mtty thing does..
btw: KITL = Kernel Independent Transport Layer, it is the windows ce kernel debugger interface
Is there anyone continueing papamopps' solution to unbrick Herald?
^^no need anymore, you can just use an official WM6 RUU
blackout203 said:
^^no need anymore, you can just use an official WM6 RUU
Click to expand...
Click to collapse
That´s not right. For unbricking a XDA Terra we still need a soulution.
The Terra IS NOT the P4350!!!!!
And the RUU updates are for P4350 (and in some cases for VPA compact)
But not for terra - we have to wait for an O2 update....
Vendor Id
I have a Vodafone CID(?) locked bricked HTC P4350.
Using the HTC updates I cannot unbrick my phone, because it keeps saying "Invalid Vender Id".
This unbricking with flashcard could be a solution for me.
I already try with official rom, but my herald is still brick, i can not syncronize the herald with pc to run the official rom.
It is freeze in inicial boot with HTC logo.
help, please anyone....
You can't simply place the rom file to the card and hope the device will read it in this way. In my time working for pda service, we used WINHex to format the card (to RAW-unformatted) and then we wrote the rom file in RAW format to the card. Your card looks like an endless stream of hexazecimal values. Only winhex recognises this format, if you insert the card to the computer, it will simply ask you to format it. After inserting this card into the pda, it will start the upgrade . The order of this operation was, as I remember, to fill the card with 0000 values (there is an option in WINHex, a kind of format) then write the rom file to the card in RAW mode. Then insert the card to the device.
Another way was to use MTTY, connect the pda to the computer (PDA should be in bootloader), open MTTY and connect with the device. ActiveSync should be killed before this. In MTTY in the terminal window write "set 14 0" then remove the data cable, then close MTTY, reconnect data cable then run the RUU.
These methods worked on HP Ipaq's wich we were repairing in our service center some time ago. I don't know if it works for herald or htc products because their RUU has a different way to register with the device.
hy there,
when i was updating a qtek1010 to wm2003SE rom, that was cooked in romkitchen, the upgrade stoped at 99%.
now i can only get into the bootloader.
bootloader version : 5.15
i've searched, and now i'm trying to upgrade from SD MMC, when i'm using OSImageTool.exe , i open the nk.nbf, destination SD MMC, then it displays this error, (NK.nbf:incorrect filesize(33554463), file should be exactly 32505888 bytes. error opening input file)
What should I do???
Thanks
Download an other ROM. THE NK.nbf-Fiel you have is the WM2003SE ROM. This file can not be written through XDA-Tools.
Download anoteher WM2003 or PPC2002 ROM, flash your device via SD-Card and the run the exe File of the WM2003SE-ROM.....
Stefan
thanks so much, it worked
but now, when i put the sdd in the qtek1010, on the bootloader nothing apears.. only :
WALLABY
Bootloader
V5.15
GSM OK
and when i press action button it displays a diagnostics list like "ram, display, touch etc..."
what am i doing wrong?
what can i do?
i've putted the sdd card in a HP photosmart to copy the .nb1 file.. is this wrong?
thanks,
Luis Martins Portugal
Looks like the ROM isn´t written correct to the card.
Otherwise it will show directly in bootloader that you can install the new ROM.
I´m nearly sure the HP Photosmart causes this problem. Do you have access to another SD-Card writer?
Stefan
ok, i'll buy a card reader and try again
thanks Stefan
i'll post here the results.
gretz
Just to ensure. You have copied the ROM using XDA Tools to the SD Card, or?
Normal paste & copy does not work......
Stefan
Help,
Is there a way to get the OS and boot img for my o2 XDA to put on my SD card so i can recover it?
I'm stuck on the boot-loader screen (version 5.22) i can not use active sync as it comes up as unrecognized device, im at my wits end, i just want to get my phone working again. is there any place i can get the O2 ROM file from? or anything that can be done, or do i have a useless brick now?
i tried upgrading with the developers ROM using the auto install, it got to the "it will take 5 mins to upgrade" screen then active sync lost connection, there was nothing showing in the progress bar, when i tried to restart, active sync could not connect. now im stuck with the boot-loader menu after a soft reset.
Sorry for the double post,
Right sorted the problem out, got a cooked ROM from a different site as no link i clicked on here was still active.
I found out that if you Format the SD card to Fat32 when in bootloader it doesn't recognize the ROM, so a format to just FAT under windows XP sorted it out, and now I'm back up and running again, though now i cant get my phone unlocked to Vodafone as the XDAunlock returns "error getting code" message. here are my Device info
Rom version 3.17.03
Radio version 4.21.X1
Protcal version 32S54
problem resolved by updating the Radio stack to 6.24 (placing the files onto the device and upgrading from there) once that had done, i had no signal, so downgraded it back to 4.21 and now I'm fully functional
Where did you get the ROM?
I have a similar problem with an XDA which failed whilst being flashed via active sync and now will not start apart from via bootloader. Where did you get the ROM that you mention please?
Thanks
Geezer
use this ROM from http://www.romkitchen.de/ choose one that u will use to cook, PC2002 or WM2003/SE, (WM2003SE cannot use SD Card, only can use activesyn) then downgrade bootloader from v5.22 to v5.15,
using MMC (flash SD) continue to special rom 1.2, Go to the bootloader utilities. Hit Contacts button and you'll get the boot loader option stuff. If the bootloader utilities you get to right away takes you to a menu with things like Boot+CE-->SD then you don't have to worry about hitting the contacts button. You only need Contacts button if when you get to the bootloader screen you see nothing more than some nice colors, the bootloader version and "GSM OK" message.
Take the Boot+CE-->SD option to back everything up. This will take a few minutes.
Once it's done pull the SD out ofthe ppcpe and stick it into your SD card reader. Bring up XDArit and chose your removeable device.
If you have more than one MMC slot select the different ones until you get one that says 'Wallaby' in the hex codes at the bottom of the XDArit screen. You'll be writing out two files, the first is the NB0 file (which is the bootloader) and the second is the NB1 file (which is the OS or ROM). Name these something like original.nb0 and 1.
Wipe the SD card (format FAT). Stick the SD card back into the pda and soft reset, then cradle it.
Go to a DOS prompt and CD to where you put 'pnewbootflash_40116.exe.' Type 'pnewbootflash_40116 nbl515.nb0' to write the Wallaby 5.15 boot loader to the device. If when you downloaded the 5.15 bootloader you called it something else (like 'wallaby_boot_loader_V5.15.nb0' you should of course use that name instead!
The output looks like this:
D:\XDAtools\binaries>pnewbootloader_40116 bl515.nb0
Copying D:\XDAtools\binaries\itsutils.dll to WCE:\windows\itsutils.dll
in FindFlashInfoOffset
protection found at 8c0d60f8
result: 00000000 00000000
for the complete, read this web :
http://www.romkitchen.de/
http://www.romkitchen.de/tools/
http://www.romkitchen.de/tools/manual_unlock.htm
*read careffuly and try it, you can read my post, almost similiar problem but i can solve it by read one by one,hehehhe.. never give-up, ok ^_^V
any help with magician rom?
OK I found this thread and this is what I need to do but I don't follow any of this. what is the ROm image and how do I cook? I'm totally lost and My phone is wrecked or bricked as you say???