Is it possible to get a notification for a dialog when SIP was opened or closed?
Thanks a lot.
Look for the windows WM_SETTINGCHANGE message and then check the windows wParam is SPI_SETSIPINFO.
Then you can use something like
SIPINFO psi;
SHSipInfo(SPI_GETSIPINFO,0,&psi,0);
To get more information about the SIPs current state.
Thanks a lot
What is SIP?
What is SIP?
Click to expand...
Click to collapse
Software Input Panel
Related
Hello, I have a very poor vision and sometimes I can hardly read the ID of the incoming caller in my MDA PRO.
When I used my old Qtek 9090, the "caller ID" application let you decide the text size, now this feature is integrated in outlook, but I found no way to adjust this parameter...
Of course I have put the OS text size to its maximum, but I'd bette have it a little bigger..
Can you please help me? thanke
If I'm not mistaken, an application such as Tweaks2k2 can change the default font, although I'm not sure about the font sizes.
I know that Nyditot's rotate program has a nifty setting that will allow you to change the font size, exactly like the appearance tab in Windows. Bit much to buy the program just for that option, though.
snorbaard said:
If I'm not mistaken, an application such as Tweaks2k2 can change the default font, although I'm not sure about the font sizes.
I know that Nyditot's rotate program has a nifty setting that will allow you to change the font size, exactly like the appearance tab in Windows. Bit much to buy the program just for that option, though.
Click to expand...
Click to collapse
Thanks a lot for answering, unfortunately none of the two applications is what I'm looking for, Nyditot magnifies the screen indeed, but I wish I had something only affecting the "dialer" aspect, in order to easily read the caller's number or name with a glance, Regarding the other application or pages I'd better levae them as they are..
I suppose there is something to tweak in the registry, or a "skin modifier" for the dialer, but I did not find anything like that so far..
for all the rest I love this PDA, I would neve go back to something without a real keypoard and such a wonder connectivity...
Try this out:
http://www.pocketx.net/products/photocontactspro_ppc/
It has an option for FULL SCREEN Caller ID
Jorgee said:
Try this out:
http://www.pocketx.net/products/photocontactspro_ppc/
It has an option for FULL SCREEN Caller ID
Click to expand...
Click to collapse
Wow!!!!! God bless you
it W O R K S ! at last!!!
very valuable sugestion, thanks!
Hi,
how can I create a short cut to SMS from Today's start page? Currently the default is set to Phone and Contacts. I find it more useful to have SMS rather than Phone as there is a direct button to Phone already.
I personally change the O2 media hardware key to messaging....but you could spend 20 seconds and search for softket applet or any other softkey changing app.
homer285 said:
I personally change the O2 media hardware key to messaging....but you could spend 20 seconds and search for softket applet or any other softkey changing app.
Click to expand...
Click to collapse
Sir, may i know how you did it? Thanks!
SMS for Winmobile 5.0
I thought I had 6.0 but its 5.0. I still do not understand how to change the contacts or phone to SMS. Can someone explain simply?
ctsedwin said:
I thought I had 6.0 but its 5.0. I still do not understand how to change the contacts or phone to SMS. Can someone explain simply?
Click to expand...
Click to collapse
please read the atom wiki -> tweaks and hacks -> modaco registry tweaks
Whenever a call is being made and answered, my TC will have a vibration alert, how can I disable such alert?
Disable Vibration
Same problem here... looking forward for a solution
I got this thread in this site :
But this doesnt work for me ..
.............................................................
You need to go into Start - Settings - Personal - Sounds and Notifications - Notifications.
Select the "Connection Established" event from the dropdown list and untick the "Vibrate" option.
Have to admit, I didn't realise Vibrate was an option under connect until I just took a look, but I can only assume you managed to set this to on at some point.
The option is in the registry under:
[HKEY_CURRENT_USER\ControlPanel\Notifications\{8ddf 46e7-56ed-4750-9e58-afc6ce486d03}]
Options under this key can be set to change the notification settings, but I am not sure of the various numbers. It is much easier to set through the method above. Also, I would not guarantee the last part of the registry location as this may be a generated location. The "(Default)" entry in this key on my device is set to "Connection Established" however, which is a dead giveaway.
Hope this helps,
Graham.
............................................
mikhalil25 said:
Same problem here... looking forward for a solution
Click to expand...
Click to collapse
Solved. It's caused by the installed 3rd party call manager.
elklau said:
Solved. It's caused by the installed 3rd party call manager.
Click to expand...
Click to collapse
Which one ? Actually, I like this feature and would like to add it to my Polaris !
Kinda OT: but how do you enable the vibrate??
azagoth said:
Which one ? Actually, I like this feature and would like to add it to my Polaris !
Click to expand...
Click to collapse
A program named "Callerloc", but it's in Chinese!
I'd like to enable this in my Pharos, but not the registry editinig, nor the 3rd party device installing solved this problem. Plz somebody help.
The vibrate on connect feature exist in the S2U2 third party programs....
Hi!! I'm new here!!
I'd like to ask if anyone knows how to change the default programs that our WM6 uses for rubrica, sms..and so on. I'd like for example to set Sms-Chat and Funcontact as the default SMS and rubrica softwares that I can open with the buttons of the Samsung Today 2 plug-in.
Any registry key to change? Any software that can manage this "preferences"?
Thank you in advance, hope to be able to help too here!!
vmspace said:
Hi!! I'm new here!!
I'd like to ask if anyone knows how to change the default programs that our WM6 uses for rubrica, sms..and so on. I'd like for example to set Sms-Chat and Funcontact as the default SMS and rubrica softwares that I can open with the buttons of the Samsung Today 2 plug-in.
Any registry key to change? Any software that can manage this "preferences"?
Thank you in advance, hope to be able to help too here!!
Click to expand...
Click to collapse
Try Spb Plus, it should do what you need and there is many more that has this as a possibility, anything installed can be tagged with plug in, Also the applications you stated should had changed to default once installed. Should also be able to do it with changing anything.
Hope this help
Guys!
Is there a way that the virtual keyboard will popup as soon as I open the contact. I use TF3D panel. Some kind of script or registery key that would help. It would be really helpful as the A B C D on the left are too tiny and a keybord will save a lot of time in hunting the name from 100s of contacts that i have.
Can anyone help me on this?
What's wrong with just sliding open the real keyboard and using that? You don't even need to use the stylus then, which you don't realy want to be holding while making a call, or putting back in the phone in the middle of one.
moleculez said:
Guys!
Is there a way that the virtual keyboard will popup as soon as I open the contact. I use TF3D panel. Some kind of script or registery key that would help. It would be really helpful as the A B C D on the left are too tiny and a keybord will save a lot of time in hunting the name from 100s of contacts that i have.
Can anyone help me on this?
Click to expand...
Click to collapse
I don't know how to resolve YOURS problem, but i think much better use some contacts managers, like VITO FunContacts of Inesoft AdressBook.
I like FunContacts. http://iwindowsmobile.com/contact-manager.html
Yeah u can use the slider undoubtly but then when ur driving or in a real hurry its better.
Thanks AlexDem
will check that option too
Try Advance config
Input --> Auto deploy SIP --> Enable
Ashwm
Unable to find Input --> Auto deploy SIP --> Enable in the advance config s.w.
Lol
Ashwm said:
Try Advance config
Input --> Auto deploy SIP --> Enable
Click to expand...
Click to collapse
You're just full of these little AC tips arent you? That's 2 so far you've helped me out with!
moleculez said:
Ashwm
Unable to find Input --> Auto deploy SIP --> Enable in the advance config s.w.
Click to expand...
Click to collapse
Are you using the latest version?
Look again?
alias_neo said:
You're just full of these little AC tips arent you? That's 2 so far you've helped me out with!
Click to expand...
Click to collapse
LOL, no problem
Glad I could help.