Hi
I have been trying to connect my laptop via bluetooth to the device to obtain internet access via GPRS.
I had this working (just once), but now it keeps giving me stupid errors. Basically, it connects, then instantly disconnects without leaving any error messages. I then try reconnecting (fails) again, with the same message. On the 3rd try, it tells me that the line is engaged (it aint). Once you get to the 3rd try, soft reset of XDA IIs is required in order to try again, in which case, we go back around in a circle!!!
Really anoying thing is that it successfully connected *once* (browing working fine etc) and that the settings are identical to what they were when it connected successfully.
Bloody thing. Any idea's?
Nigel
Hi
Please try to follow this steps!
1st Make sure you don´t have any ActiveSync connection in your Bluetooth settings in your PDA.
2nd Create in connection wizard in your PDA a ActiveSync via Bluetooth connection.
3rd Goto to your ActiveSync in your PC and goto to FILE>Obtain Connection
If you have the connection made via bluetooth and your active sync start connecting, you already have Internet in your PDA. If not open your PDA ActiveSync and try there to make synchronization.
I hope i was usefull.
8)
Maybe you missed the point. I think the original post was on how to connect a laptop to the internet wirelessly though a Bluetooth connection to the XDA then with the GPRS internet data connection on the XDA. Your post sounds like how to get internet access on the XDA through the laptop connection. I also have the latter working but not the former. I need some detailed instructions on how to accomplish the former through BOTH GPRS and dial up. I need the steps to take on the PC as well as the mobile device.
internet access through gprs
It's something due to xp protection rules.I hope you'll find solution looking at advanced section in modem property (in windows home page start>setting>modem>modem properties);there's a string shorter than the original one you've typed,lacking of ",0,0" at its end.
Try to add it manually.
Hope this help.
Don't remove HTC Modem drivers to let windows install backup ms driver.
Max
How to install PDA2K modem drivers at Windows 2000 Sp4
Hi. I'm try to install PDA2K modem drivers connected to laptop via usb data cable (Windows 2000 Sp4 Operation System) Then i'm try to istall plug and play modem - i have no any modem found result. then i'm try to select modem driver from Pda2k installation CD - i have same result - Do modem drivers found. Please help me to install Pda2K modem connected to pc via usb datacable for connect to internet using Mobile GPRS.
Sorry for my english.
Bestr Regards.
Sergey S. Krupnov
The answers should be here...
Hi Mr. Serj. I seemed to have a lot of problems and after "messing" around enough I found the solution. In the end it was pretty easy. My description is for WinXP but it should be pretty close in Win2000. See the fourth post from me here: http://forum.xda-developers.com/viewtopic.php?t=18404&highlight=
swamp2 - that was really useful, thanks.
Related
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
thomo said:
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
Click to expand...
Click to collapse
Why do you need to setup connection for since it's already connected with ActiveSync via BT? Basically once you get connection between your device & activeSync, that's all the step you did. Unless a firewall has stopped your device from accessing to the internet; if it's the case, create exception for your activeSync, and retry browsing with your device.
hope this helps.
regards.
thanks for yor reply, Each time I try to connect the the interneet on my device it keeps trying to connect via GPRS and not through my PC via BT....
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
thats it, it finally works. Thanks very much.
Glad to hear that, thomo
You're welcome anytime, dude :wink:
activesync through bt
go to setup in bluetooth and select the activesync in bt
pair the pda or ppc
give password
in wm2005 select activesync through the bt
brouse internet
i did myself
I'm having a similar problem and have effected the setting as above, however IE on my IIs says "the page you are looking for cannot be found". My computer connects fine and I have the same issue when trying to connect the device via WiLan, although I do connect to the network.
I've been trying to fiddle with the settings for a few days now but no success...anyone out there got any ideas.
Many thanks
I have mastered it now, I sync using BT on my device, leave it connetced, close Active sync on my XDA 11, Click on IE and the device connects through my PC, super duper.........
Thanks, this is what i am looking for now. I will try it
i can now only online with cable, not through Bluetooth connection
go into the advantage settings for connections
there you should be able to change the network back to my isp insted
of my network
bluetooth-internet
Hai...iam new here..i have got O2mini and would like to connect to internet via bluetooth...
i try using usb cable and activesync program to serve internet and its working.
...i succesfully connect my pc and ppc via bluetooth by using ppc activesync but when try connet to internet its still go to gprs..
pls help me...TQ
like i said again and again in this thread it's all about which network is picked in advantage settings under network connections in systems
I also tried to make a connection to the internet with activesync and usb. But with my mda doesn't work. iexplorer says the page you are looking for cannot be found. But my ppc says "connectivity the internet Pc connection". What are the settings on your ppc, so i can check?
Somebody help me.
test with ping
and maybe messenger to see if it's a dns issue
and if people use pocketplus they prob should make sure that it's not set to close insted of minimizing otherwise the connection would most likely be closed when they close activesync
Thank you very much. You solved my problem.
ezzkht said:
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
Click to expand...
Click to collapse
hey all.
thx 4 all the help,advice n guides here.
i have a htc prophet n a windows xp laptop. heard that u can use gprs via bluetooth to connect to internet on pc.howd u do that.plz outline.
You're probably confused... You have to establish an activesync connection by bluetooth and then you'll have access to the web... Just like using the cable but slower...
and how do u setup the active bluetooth connection?
You just have to activate the 'modem link' on the PPC. In Vista at least, all I do is create a new modem connection using the bluetooth modem on the PPC and dial *99#. Pretty simple....
In some ROMs there is an Internet Sharing Option....just activate it, select Bluetooth PAN & connect to the device from PC
could some1 plz outline the steps for setting up the connection, coz all i hear is 'murmuring' ..plz,am still new to all this ppc stuff
Look at the Wiki - start at here's a hint: http://wiki.xda-developers.com/index.php?pagename=Prophet_USBModem
Hello friends!
I spent about 2 days on my phone wondering and trying to get internet connection on my Prophet...So I did it!It's like this:
When you connect your Prophet via USB it will show you new connection....
Go to Start/Control Panel/Network Connections and than click on left side "Set up a home or a small office Network"...So when you finish the wizard,restart your computer (do not disconnect Prophet) and it will work...It was the only way for me to get Internet Connection...I hope I helped someone just like others helped me...Greetings!
can i use GPRS surf the internet with laptop(not with the phone), is there any setting in order to surf the web? thanks!
I think It's not worth it...In Slovenia,where I live,GPRS is at least 10times more expencive than tipycal cable NET...Some of my friends tryed to connect laptop to NET by smartphone,but the speed in really low and also phone bill was shocking...So get standard internet...Greetings!
I tried to use Trinity as a modem and did not manage to make this work.
I connect the usb cable. Start ISharing program on pda. Click conect. Says connected. 3G connection works. However the laptop is not connected to the internet.
Bluetooth also does not work. I can't find a way to create a PAN as they call it.
I would appreciate any suggestions as the manual is not clear on this topic
edit: i start internet sharing on my pda. i choose bluetooth. click connect. it says: Device setup finished. On the PC connect Bluetooth PAN.
On the PC i find my device. Find available services. Double click on 'Network Acces Point on Trinity'. I get a message that the computer is connecting and then an error: The Network Access connection failed: Could not connect to the remote device'
edit2: finally solved it.
I had to enter advanced bluetooth config on laptop. Under 'network access' properties I selected 'allow other devices to create a private network with this device'. Now it works.
hi,
i had the same issue, using bluetooth, but it´s the same, i guess.
you need to connect the pda with the pc, and when you get the connection, you go to the program menu in the pda, and select in the submenu connetions usb/bluettoth pan and connect.
the dial up connectiosn should start.
tell me if suceed.
i start internet sharing on phone. then go on bluetooth->quick connect-> network access -> my phone name. then it works as i mentioned above. but i had to change some properties in my bluetooth configuration to make it work.
The same for me : when I try tu use it as a GPRS modem for my TomTom Rider device, the Rider says that the DUN profile isn't provided as a service by the Trinity !!! Use to work perfectly with my old Magician !!! I'm really disappointed ! Will see if the brand new ROM with GPS feature corrects this...
try to start internet sharing first (in trinity), connect to gprs and then start bluetooth services discovery on tomtom.
I'm not using bluetooth, but trying to use the phone as a modem using USB with a laptop. It works, but is really flaky, so would appreciate some pointers on how to fix the problem.
First thing that I do is connect the phone to my laptop via USB. Activesync starts up on both the laptop and the phone. Then, when I start the Internet Sharing program, the phone stops Activesync and connects to the network. Everything works fine for a while and I am able to surf the net on both the Trinity and the laptop with no problems for a while. The problem is that after a period that can vary from 10 minutes to 1 hours, the laptop loses the internet connection. The phone is still connected to the internet though and I can still surf using the PDA. It's just the laptop that loses the connection.
I have to reboot the laptop and soft reset the Trinity to repeat the process to get internet on the laptop going again.
Any ideas what's causing the problem? I've tried disabling Advanced USB Functionality on the Trinity, but the problem is still there...
Hi Guys
Sorry if ive posted this in the wrong place (Admins, feel free to move it if need be)
Well... My old iMate JasJar (HTC Universal) died completely last night, so today I went and got myself an OKTA Boss... Im pretty sure its an HTC Manufactured phone, just cant quite work out which model... But anyway... Onto my problem
I regularly work out of the office and rely on my PDA for internet access, I used to use the USB Dialer for WM5 with the JasJar and it worked just fine.
Now the new BOSS has WM6 so has Internet Connection Sharing... But I just cant get it to work...
Everytime I connect it the icon in the taskbar (Im running Windows XP SP2 and ActiveSync 4.5) searchs for the IP address and then fails to find an IP, coming up with a error in a bubble:
"There is limited or no connectivity on this network connection"
ActiveSync works fine, as does browsing and copying files to and from the phone within My Computer, but Internet Connection Sharing doesnt...
Heres what Ive tried so far...
-Turn off USB Connections in ActiveSync (on PC, have to do this anyway or PDA complains)
-Diabled Windows Firewall (on PC)
-Disabled or deleted all other network connections and old USB Modem drivers (on PC)
-Turned off "Enable Advanced Network Functionality" (on phone)
-Tried 3 Different PCs and 4 Different Cables (all with same results)
-Yelled @ various peices of IT equipment in my house LOL
So any ideas on how to fix this?
If not then my Screen Name is living up to its meaning.
mabey the phone is not getting gprs/edge?
Make sure you close the ActiveSync when it try to start, you can do it with the X Button
or simply use the
Setting > System > Memory > Running Program
select ActiveSync and the click Stop
If you do this quick the internet connection will up if you let the ActiveSync run long enough it will set up PC to your device connection for data syncronization/transfer only with no routing to internet.
Hope this help
Maybe Your service provider does not allow you to use your data connection to share with the pc, try using pdanet that way you can syncronise and use it for ICS at the same time
http://www.junefabrics.com/pdanet/index.php
Double Post Sorry
Hi,
I'm looking to use my X1 as an internet sharing device for my laptop on the go. However, I can't seem to get it to do it WITHOUT installing activesync.
So I've just plugged in my phone into my PC and it asks for a "Generic RNDIS". Do I have to install activesync to get my phone to interact with the laptop??
I just want to use it for internet sharing. I've read a lot about using bluetooth and stuff, but no solution for using just a plain USB.
Any help greatly appreciated!
THANKS
You will find internet sharing in programs folder. I does not require installation of anything (on Windows Vista).
have you tried wmwifirouter, its a great app
I use XP - and whenever I plug my phone in, it asks for the "generic RNDIS" driver
So 1) even if I switch on the Net Sharing on the phone, it does nothing.
2) Does wmwifirouter work even though it keeps asking me for the RNDIS???
No way to just import some essential drivers and then connect the phone the usual way??
domyue said:
I use XP - and whenever I plug my phone in, it asks for the "generic RNDIS" driver
So 1) even if I switch on the Net Sharing on the phone, it does nothing.
2) Does wmwifirouter work even though it keeps asking me for the RNDIS???
No way to just import some essential drivers and then connect the phone the usual way??
Click to expand...
Click to collapse
I believe you could import the drivers. If you know which drivers
At what time does the mentioned message show up? When you open internet sharing? Or already when you connect the phone?
WMWifirouter is very nice, but you have to buy it. It provides USB support. And it SHOULD not require an additional driver. However, I think a "generic RNDIS" driver is not something very exotic. I think the problem is your computer. Have you tried on another one?
if xp doesnt load the needed drivers automatically then i do believe you need to install activesync. is there a reason why you dont want to install activesync?
@Firefall: This "generic RNDIS" message comes up whenever I plug in my phone and it happens to every PC i have (3 different ones).
@c_legaspi: The reason is that I dont use activesync for anything on my laptop. Additionally, activesync allows my phone only 2 PC's to attach to. Otherwise it'll ask me to "delete" a connection with a previous PC, if you see what I mean.
BTW, anyone experience the problem where one needs activesync installed before USB-charging works?? Its the case for me strangely...
i dont know about charging with only activesync but i do know there is a setting that you can choose on whether to or not to charge when connected to the pc.
yeah, i know that setting. It definitely charges when its connected to activesync. But connected to just any PC, it wont do a thing.
In contrast, my previous S710 (vox) charged even if you connected it up to a carrot
this is offtopic a bit since you're using XP but on vista or Windows7 with the supported bluetooth profile for bluetooth PAN, i would just set the phone for internet connection sharing through 3G and then set my laptop to connect through bluetooth PAN and they work fine together. no other software needed. however you're limited to using the 3G/EDGE feature only, no wifi.
wmwifirouter is a better solution if you need to connect through wifi.
if your bluetooth on your laptop can connect through Dial-up Networking (DUN), then you'll need to find out the username, password, and phone number of your carrier (it goes something like wapuser1, wap, *99***1# for Rogers Canada) and set it up with your laptop. i've been doing this on my previous phones but it seems the X1 can only connect through bluetooth PAN which is easier to set up imo but it cannot automatically connect to the internet unlike DUN.
I think the point is that you need to start the internet sharing app and choose connect before you connect the USB cable. If you connect the cable at that time, the phone installs the right drivers (the computer recognises it as a different kind of device at this point).
I have not tried this on XP, only on Vista.
/Per
I'm not sure if this help any of you, but at the moment I'm using my phone to connect to internet. I follow the instruction on Xi manual http://www.sonyericsson.com/cws/download/1/522/265/1224514276/X1__UG_1215_1000_2_EN.pdf page 31 "Using your phone as a Bluetooth™ modem".
I'm using window vista to connect my phone to pc via usb go to program internet sharing and the pc search for the driver installed and done I'm surfing
I am also trying to use the X1 as a modem without installing ActiveSync.
You can extract the RNDIS-Driver for XP from the ActiveSync-Setup:
1. uncompress setup.msi with 7zip, you get ActiveSync.cab and some other stuff
2. uncompress ActiveSync.cab with 7zip
3. now copy the files
- WceRndis.inf
- WceRndis.cat
- WceIS.inf
- wceis.cat
- usb8023Y.sys
- RNDISMPY.sys for later use
When prompted for NDIS-Driver go for the WceRndis.inf. On my XP it installed fine and gave me an additional network interface. After setting IP-Adresses for PC and phone i have a network-connection.
If you activate Internet Sharing on the phone then Windows asks again for an RNDIS-driver. This time, use the WceIS.inf. It installes the same files, i am not sure what the difference is.
Hope this helps!