Hi,
Ok after the breakthrough regarding the ROM updates for QTEK 1010 and it was first revealed here on xda-develpers.com we have some new options in the QTEK now one of them is the WM.
Did anyone manage to use the Wireless Modem via IRDA because its not working the first thing is that the computer is seeing the device on infrared but not as a modem and i dont have an *.inf file to indentify it. If anyone managed to use his QTEK or any XDA via infrared to connect his laptop to the internet using GPRS plz explain how.
thanks
to irda on win2k/xp
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Ummm its a good idea but i am not sure if this will work on Windows XP... what do you think?
it does
it does, but as with all things apply with care
Tried it
I tried this a long time ago, IRCOMM2k works on XP but the problem is that i couldn't figure out how to setup a IR generic Modem working on that port.
Yes please, this is a good article,
I installed the ircomm2k on my XP, but how to configure the connection from my laptop to connect to the internet via my XDA PDA as an external modem?
to setup xda as a modem
1. Install Ircomm. note which com port is assigned as permanent.
2. Add new modem: standard 33600
3. Select com port from item 1 as the com port of choice
4. Edit modem profile in devices settings, in Extra Initialisation Commands add AT+CGDCONT=1,"IP","apn name"
5. VERY IMPORTANT: set flow control to OFF
6. Set port speed to 115200 ONLY
Set up a Mobile Web net connection as per your operator
Select your above modem
Align xda with irda port; select start on Wmodem app
Double click Mobile Web connection.
Surf. It's OK but not as fast as a GPRS card.
OR you can wait for O2 to eventually post some instructions...
Thank you very much for your feedback
I did all what you asked me to do, but its not working it gave me an error message:
Error 692: There was a hardware failure in the modem (or other connecting device).
I replaced AT+CGDCONT=1,"IP","apn name" BY AT+CGDCONT=1,"IP","apn01" same as Im using in my PDA. Am I right?
Something I didn't understand in your reply:
(Set up a Mobile Web net connection), you mean a normal dial-up connection?
One more thing, what do you mean by (select start on Wmodem app)?
Do I have to do anything in my PDA before I connect from my laptop? or do I have to do anything in my PDA configuration or connections settings?
Please help me, I want to use the Gprs on my laptop, no need to pay for 2 services, one for the PDA and other for my laptop
Best regards, Ali Alsaffar [email protected]
"select start on Wmodem app" - this means go into the Wireless Modem application on the xda, select IrDA (if thats now you are connecting) and then tap the Start button.
When you've done that, go the the DUN connection on laptop and connect as you normally do.
Unfortunatly I dont have "Wireless Modem application" on my XDA from where I can get it?
I thought the command was:
AT+CGDCONT=1,"IP","apn name","",0,0
I don't know about the command but what Im sure about it is that wModem application is mandatory, so from where I can get it?
Re: to irda on win2k/xp
guest said:
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Click to expand...
Click to collapse
HI. I HAVE AN OLDISH LAPTOP RUNNING WIN ME. WILL IRCOMM2K WORK ON ME OR IS IT INTENDED (AS NAMED) FOR WIN 2K AND XP ONLY?
From: Helpdesk (source O2) Sent: 30 May 2003 13:54
Subject: RE: wireless modem
Hi
The wireless modem will be available in the next ROM update from the xda team. I understand that this will be released in the next couple weeks - they are in the final stages of testing.
We will highlight the new ROM on our homepage with a link to the downloadable files.
regards
source O2
Re: to irda on win2k/xp
Anonymous said:
guest said:
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Click to expand...
Click to collapse
HI. I HAVE AN OLDISH LAPTOP RUNNING WIN ME. WILL IRCOMM2K WORK ON ME OR IS IT INTENDED (AS NAMED) FOR WIN 2K AND XP ONLY?
Click to expand...
Click to collapse
Hmm... really good question. ME is an update to 98 as I recall, but a clunky upgrade.
Way to check: Setup a new modem. When it asks which COM port you wish to use, if you can select Virtual Infrared COM port then it should work fine.
Get the instructions at www.o2.co.uk/xda on Help and Support.
Anyone know what the T-Mobile USA network connections for using WModem are?
For UK O2 they are:
Primary DNS - 193.113.200.200
Alternate DNS - 193.113.200.201
User name - O2Web
Password - password
Has anyone used wmodem in the US with T-Mobile as a service provider?
Thanks,
JP
Qtek as wireless modem
I also have oldish ME Laptop computer. I did exactly as described on O2 support site. It does not work. The modem on laptop immediately disconnects saying it's not responding properly.
I have tried several cooked versions of the 4..00.16 Eng T-Moble and the 4.00.11 ENG WM2003 roms and niether one installs the WModem app. Any ideas why?
I have a T-Mobile version of the PPC, radio stack 6.24
WM with old laptop computer
It worked for me. I could connect my oldish ME notebook computer to internet over gprs using WM in xda. I used the extra string from o2 and just changed the access point name.
It goes as this:
AT+CGDCONT=1,"IP","apn"
It works, but the WM just stops responding the moment you disconnect the connection from PC. The PC waits and waits for the confirmation and then hangs up saying no reponse. But as long as you are connected it works very well.
I upgrade to new UK ROm 1.60.00 and i see the Wireless Modem in the program menu,i try to run it but it displays that erro .... that i cant use my XDA II as a wireless modem for my laptop although i connected it with my USB cable...
plzz help me out if anyone know
ActiveSync
This article will tell you everything about using XDAII as a modem : http://www.ppcw.net/index.php?itemid=1656
You can download modem driver from the same site.
It is important to turn off ActiveSync, otherwise it won't work.
Regards,
is this just using the XDAII as a wireless network card? or am I confused?
WiZeR said:
is this just using the XDAII as a wireless network card? or am I confused?
Click to expand...
Click to collapse
No, it is wireless modem (built-in as in some handphone version) for conecting from PC to phone for data transmission
Hi guys,
I am a system programmer on macintosh MAC OS X. Recently I am trying to configure DUN(Dial up networking) on MAC through my WM5 device i.e an O2 XDAII device via Wireless modem . And Its working fine with Bluetooth but when I was trying with USB cable , device is not detected on network port. So please tell me the possible reason of so or am I missing some steps?
So please tell me in brief that How can I achieve DUN via USB cable on mAC OS X through O2 XDAII WM5 device.
Thanks in advance
Subodh
Hi,
I've got my O2 XDA Mini working as a wireless modem in Windows XP, but now I'm trying to do the same thing on my Linux machine and can't seem to get it to work.
I've loaded the usbserial kernel module using vendor=0x0bb4 product=0x00cf (the correct codes for the O2 XDA Mini) and i get a /dev/ttyUSB0 device created, but wvDial/gnome-ppp don't seem to be able to talk to it - is there anything else that needs to be done?
Cheers!
Kevin
as i believe the way to make bluetooth modems work are general for all bluetooth modems
i suspect you could most likely get alot more help in real linux forums then here where it seems most use windoze
kgfullerton said:
Hi,
I've got my O2 XDA Mini working as a wireless modem in Windows XP, but now I'm trying to do the same thing on my Linux machine and can't seem to get it to work.
I've loaded the usbserial kernel module using vendor=0x0bb4 product=0x00cf (the correct codes for the O2 XDA Mini) and i get a /dev/ttyUSB0 device created, but wvDial/gnome-ppp don't seem to be able to talk to it - is there anything else that needs to be done?
Cheers!
Kevin
Click to expand...
Click to collapse
You have to load two modules to make the pocketpc work via usb.
modprobe usbserial vendor=0x0BB4 product=0x00cf
modprobe ipaq vendor=0x0BB4 product=0x00cf
Those are the lines I use for my MDA (htc wizard)
can a friend use my GPRS connection from my windows mobile device (o2 xda orbit running WM6 B&B 4) on his PDA if i setup interent connectiopn sharing via bluetooth and he pairs to me ?
I tried to make it work but failed, any advice / tutorial ?
Thanks