Cannot upgrade to Windows Mobile 2003 on SX56 - MDA, XDA, 1010 Software Upgrading

Okay, I've had it. I've spent all weekend trying multiple configurations to get my system upgraded. I was originally running bootloader 5.22 and went to Lumpistefans' kitchen and cooked multiple ROMs but none of them brought up a working system. I first cooked the Siemens A.30.09 but that didn't work, then I tried the 4.01.16 ENG T-mobile (since that the service provider I'm using) but that didn't work also. I went back to my orignal and it's working fine, no problems.
I then thought that maybe it was my bootloader, so I downgraded to 5.15 and then tried flashing the same ROMs again, but still they didn't work! I even tried the 4.01.12 EURO 02, but that didn't work either.
After I flash to a new ROM I get the ROM's boot screen (not the one with the different band colors, but the actual ROM screen image just as if it were going to boot fine, then in the lower right hand corner all the version stuff pops up, but then that's it. NOTHING HAPPENS! It just sits there fore EVAR!!!
I'm about to go bald by ripping my hair out if I can't figure it out.
BTW, I was sure to make a backup of the bootloader 5.22 just in case.
My XDA info:
Model: PW10B1
ROM: 3.17.03
Date: 05/15/03
Radio stack version: A.20.10
Protocol version: 324e4
Lower right-hand corner:
G324e4
RA.20.10
3.17.03
Does anybody have a ROM, or tell me what ROM, to use so I get get the latest WM and "get with it"?
THANK YOU!

Related

T-Mo: How and where to downgrade Radio Stack.

A few words from newbie (it's me): I own T-Mo advanced (64Mb) since October 2003, it was bought in Moscow. It had a ROM 3.16-007 ENG and native Radio version (I forgot its exact number) from Czech/Slovak. After I had successfully upgraded my T-Mo ROM up to 4.00.21 ENG, I dnloaded from yorch.net and installed upgrade RSU 4.21.00. Pprotocol is 32S54. And now I stupidly stopped – I cannot obtain the sign “G” appears on the screen. There is no possibility to setup gprs connections on my T-Mo.
Should I downgrade to the original Radio Stack to original or not? I have no idea where to get some help in Russia. And where to pick up these files for downloading? Please gimme some X-Mas advice? Thank in advance.
aoandrew said:
A few words from newbie (it's me): I own T-Mo advanced (64Mb) since October 2003, it was bought in Moscow. It had a ROM 3.16-007 ENG and native Radio version (I forgot its exact number) from Czech/Slovak. After I had successfully upgraded my T-Mo ROM up to 4.00.21 ENG, I dnloaded from yorch.net and installed upgrade RSU 4.21.00. Pprotocol is 32S54. And now I stupidly stopped – I cannot obtain the sign “G” appears on the screen. There is no possibility to setup gprs connections on my T-Mo.
Click to expand...
Click to collapse
The desion of this problem appeared simple: Restore! ROM
using OSImage tool I transferred previous ROM onto 256 Mb SD-Card, and then thru bootloader I restored it as main OS on my T-Mo.
Now I have
ROM version: 3.14.02 ENG 09/27/02
Radio version: 4.21
Protocol 32S54.
Ready to ppresent my ROM to whom it may be interestin. 14,5 Mb in zip-archive
Thank you all for inspiration.

unlock - same old story

i know that this is old stuff but i cant find what i need (i am new at this) sorry!
from what i found i have a wallaby (pw10b1) that i want to unlock. it was purchased from tmobile usa and my account with them has been closed for over a year. i am with cingular and want to use this device. i downloaded xdaunlock.exe loaded it using hotsync, clicked on it and get "error getting unlock code" here is what i have:
rom version: 3.14.40 eng
rom date: 11/26/02
radio version 6.18
protocol version: 324e4
what do i need to do to unlock this thing?
You need a newer ROM including the wmodem function.
Easiest was is downloading XDA Special Edition ROM 1.2 and install it on your device.
This ROM is based on 3.17.03 includes WModem, the unlock-tool and some other nice applications....
HTH
Stefan
Thank you for the info. I am downloading it now.

Tytn Radio Problems

hi folks!
i have a problem using my tytn. when i move around to areas with dead spots my mobile seems to crash. well, not the tytn, but the radio rom.
situation:
im talkin to someone with 3-5 bars. hangin up, and switch to standby mode.
then i put it in my pocket (jeans, or whatsoever)..
moving down in the cellar with heavy walls.
Now the tytn iss in standby. when i try to phone it (from another mobile) its just unreachable. so, i switch it on, and i see 3 or 5 bars.
when im trying to make a call it does not work. some seconds later the tytn recognizes that a "netsearch" will be great.
after that it is reachable.
strange thing, just because if i dont touch it, it is unreachable for days..
any suggestions?
i have
Rom version: 1.35.255.2
Radio version: 1.18.00.10
ext. Rom: 1.35.255.102
it is almost useless, because i'm never shure if its reachable or not.
thanks for helping me.
the_cheat
well, updated to 1.20 (radio rom) and unfortunately.. no changes..
my herm100 is not goin to recognize that there is no radio tower.
... and if there's a new... connect to a new one...
my next step is a downgrade to 1.16
i read many of all the threads in this forum and 1.16 seems to be the most stable.
tomorrow i can tell u more of my progresses.
a tired
the_cheat
I have posted this elsewhere but would repeat this over here.
I had exactly the same problem with my new Jasjam (S/N Ht647XXX).
The ROM originally (factory installed) when I received my Jasjam is detailed below:-
ROM Version: 1.31.305.2
ROM Date: 8th September 2006
Radio Version: 1.21.31.10
Protocol Version: 32.53.7020.01H
Ext ROM Version: 1.31.305.104
Bootloader Version:1.06
I then went to the i-mate site and downloaded the latest ROM available which is detailed below:-
ROM Version: 1.20.305.3
ROM Date: 21st July 2006
Radio Version: 1.07.03.10
Protocol Version: 32.41.1010.02H
Ext ROM Version: 1.20.305.104
Bootloader Version:1.04
This change of ROM from the one which was supplied with my jasjam to the one available on the i-mate site has totally resolved my problem.
It is rather strange that the ROM available on the i-mate site which the site says is the latest ROM available is actually older than the one which came installed on my jasjam. The only logical reason could be that i-mate realized that the ROM being shipped with their new devices has a problem and have therefore not made it available on their site.
Regards

The phone is not ready. Wait 15 seconds and try again.

ok so i too have had the message
"The phone is not ready. Wait 15 seconds and try again."
Click to expand...
Click to collapse
but after alot of experimenting i have found a solution. i thought i'd post this to help anyone else out with the same problem!
I bought an M600 on orange PAYG however on inserting my orange contract sim i can use the phone but cannot send SMS messages or adjust phone settings, if i attempt to all i get is the message above.
having spoken to orange about this several times it turns out to be a sim compatibility issue. orange however do not support sim swapping all they can do is send out sims compatible with the handset they sent you! i.e the N73 i got on upgrade.
So my solution, i paid imei-check to CID unlock the phone, i actually already unlocked the phone using lockiwiz but that will only remove the simlock on a G4 and AFAIK imei-check are the only people to unlock the CID.
once unlocked i backed up the shipped rom to SD as described in the prophet WIKI (just in case i needed to restore it to orange settings) and then upgraded the rom.
i tried several shipped roms and eventually found this rom the
RUU_Prophet_220734_2207114_024721_?QtekWWE_Ship.exe
Click to expand...
Click to collapse
to not only work but also be in english. its a great rom, very basic without all the junk orange supply as standard
I don't really know why this has solved my problem i think its something to do with the radio rom but whatever it is it works perfectly!
below is my phones new info, if someone with the orange Rom could post the same I'd be interested to compare the versions.
ROM version: 2.20.7.34 WWE
ROM date: 7/10/06
Radio version: 02.47.21
Protocol Version: 4.1.13.24
ExtROM version: 2.20.7.114
I hope this helps someone out there!
for discussion purposes
That sounds weird why it works like that since my understanding of unlocking CID was merely so that one could install different ROMs. Someone pls correct me if I'm wrong here.
nrewq said:
That sounds weird why it works like that since my understanding of unlocking CID was merely so that one could install different ROMs. Someone pls correct me if I'm wrong here.
Click to expand...
Click to collapse
it is!!!! i needed to update the rom to get it to work! as above i stated that i changed from the orange rom to the qtek one, hence CID needs to be unlocked
So my solution, i paid imei-check to CID unlock the phone, i actually already unlocked the phone using lockiwiz but that will only remove the simlock on a G4 and AFAIK imei-check are the only people to unlock the CID.
once unlocked i backed up the shipped rom to SD as described in the prophet WIKI (just in case i needed to restore it to orange settings) and then upgraded the rom.
Click to expand...
Click to collapse
Afaik, if you remove IPL/SPL from the ROM (There should be tutorials somewhere around here on how to do it) you don't have to CID unlock your phone.
I would really like to try this! I am always getting the same error so often whenever I send a new sms. I have an i-mate JAMin, prophet touch X ipl&spl 2.20, gsm 2.69. I can't find the ROM you're talking about in the xda-developer's ftp. Can you please upload it? Thank you so much!
its on the wiki page
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Okay If I installed this, do I have to reinstall wm6 and then my current ROM again(Prophet Touch X)?
yes i expect so, i'm no expert, thats just the way i solved the problem on mine!
i think it has to do with the radio rom version
You can update the radio ROM without having to change the normal ROM.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_1_Upgrade
I am currently using v2.69. Does it mean I have to downgrade or test other versions? How about you? What version are you using guys?
hey as i stated, i'm not entirely sure what eaxctly it was that the replacement rom fixed but it did fix it!
Are you guys using orange M600s? whats your rom info?
mine was:
ROM version: 2.20.7.34 WWE
ROM date: 7/10/06
Radio version: 02.47.21
Protocol Version: 4.1.13.24
ExtROM version: 2.20.7.114
unfortunately i had my phone stolen so i can't help much more than that.
Okay I have fixed mine. I tried all versions but only version 2.30.21 of Radio ROM only fixed my problem. Thanks guys for all the help.
jifop said:
:
ROM version: 2.20.7.34 WWE
ROM date: 7/10/06
Radio version: 02.47.21
Protocol Version: 4.1.13.24
ExtROM version: 2.20.7.114
Click to expand...
Click to collapse
I had the same issues, updated my M600 to the above ROM and it now works perfectly
wow - does that mean you guys are using a 3g sim in a orange m600??
if so - what is a radio rom (and what does it replace?)
can you run these radio roms with wm6.1? or does it mean going back to 5?
sorry for all the questions i am despirate to get my phone working!!
I have a similar problem, going to try the rom you recommended but thought I'd post my pre-rom stats.
below is my phones new info, if someone with the orange Rom could post the same I'd be interested to compare the versions.
ROM version: 2.20.7.34 WWE
ROM date: 7/10/06
Radio version: 02.47.21
Protocol Version: 4.1.13.24
ExtROM version: 2.20.7.114
Original version
ROM version: 2.10.1.22 WWE
ROM date: 2/16/06
Radio version: 02.07.20
Protocol Version: 413.1.03
ExtROM version: 2.10.1.107
Hopefully this new rom will sort my problem out.
something i also have tis problem too. i solve it by go to comm manager, turn off the phone den on it again. den it was fixed~~

no signals after unlocking PW10A1

i got O2 Xda Pocket PC PW10A1 for unlocking. i got
ROM: 3.17.03 ENG
Wallaby booatloader: 5.22
first i downgrade bootloader 5.15. then i flash it with special_rom_1.2 then reprogram the radio to 6.24. first i unlocked the device with xdaunlock.exe. i inserted sim card but no signals on set. i have tried many tricks like i flash with original rom even with different roms but no successful. i have no backup of bootloader and rom.
right now device information is
ROM version: 3.17.03 Eng
ROM date: 05/15/03
Radio version: 6.24.00
Protocol version 32e4
booatloader: 5.15
need help as soon as possilbe
You have installed the wrong RSU-VErsion. 6.xx are for PW10B-devices that uses 900/1900 Mhz. You have to install a 4.xx Version
Stefan

Categories

Resources