Related
Hi all.
I own a Qtek S100 for around 2 weeks, and have come to love the device for it's all around functionality and small form factor.
As a PDA w/stylus, I have absolutely no complaints. It's a great tool with hundreds of different pieces of software and games to play with.
As many of you, I want to use the Magician as my main phone as well. This is where the problems start. Windows Mobile does not seem be geared towards non-stylus use, yet when you are out and about, it would be nice if you could accomplish basic tasks without the stylus. The main reason being is that when you are out you want to protect the screen so you put the device in a case, so the screen isn't accessible.
Anyway, you guys know all this. Now here's the question. Is there software out there that's designed to make Pocket PC phone edition a better one-handed device? I am thinking of something like the following:
You click one of the hardware buttons, which opens this 'one-handed' program. This brings up a tree/menu of different functions. Anything you would need to do while you're on the road. For example:
Turn the phone to silent.
Turn bluetooth on/off.
Control the music you're playing (on/off/forward/back etc..)
Turn the device off.
Anything you can think of.
I realize you can do some of these things by mapping certain buttons to certain programs or by scrolling on the today screen or by trying to use the start menu, but I'm finding that you can only get so far before you're stuck and you have to use the stylus.
So is there any software of this nature? If not I might sit down and write something myself. If I do it would be cool if everyone can pitch and name things they'd like to do with one hand that they can't seem to accomplish.
Thanks!
What you need as a starter is Burr Oak HotButton Plus. This allows you to assign ONE hardware button that then pops up a list of programs that you can run. The list is configurable of course. You can navigate through the list of programs using your D-pad.
I would suggest getting a list of "Settings" shortcuts (available on the forum). Place these shortcuts in a folder and call them from HotButton Plus.
I also find Microsoft Voice Command a very useful software, especially when I'm driving. You can open programs, play music, etc. using your voice.
Also, this hardware-button tweak might do something nice. Haven't tried myself.
http://www.pocketpcthoughts.com/index.php?action=expand,40355
I use AEBPlus in combination with Mortbuttons. AEBPlus is bound to a hwardware button, in my case Calendar. When I double press it, Mortbutton 1 pops-up a list of apps that I set in Mortbutton options. In this way, I can switch on/off bluetooth, phone, or launch apps. Mortbutton gives up to 12 apps per list and 5 lists are available. With AEBPlus I can bind 3 Mortbuttons per hard button, e.g. 36 apps per button!
Mortbuttons can be found on www.sto-helit.de
thanks guys. I will give all of these a try!
phoneplus for phone abilities
phonealarms for profiles
All those programs are not directly given what we expected - one handed operation.
jamijam,
Could you develop the program?
Cheers,
jamijam said:
Hi all.
I own a Qtek S100 for around 2 weeks, and have come to love the device for it's all around functionality and small form factor.
As a PDA w/stylus, I have absolutely no complaints. It's a great tool with hundreds of different pieces of software and games to play with.
As many of you, I want to use the Magician as my main phone as well. This is where the problems start. Windows Mobile does not seem be geared towards non-stylus use, yet when you are out and about, it would be nice if you could accomplish basic tasks without the stylus. The main reason being is that when you are out you want to protect the screen so you put the device in a case, so the screen isn't accessible.
Anyway, you guys know all this. Now here's the question. Is there software out there that's designed to make Pocket PC phone edition a better one-handed device? I am thinking of something like the following:
You click one of the hardware buttons, which opens this 'one-handed' program. This brings up a tree/menu of different functions. Anything you would need to do while you're on the road. For example:
Turn the phone to silent.
Turn bluetooth on/off.
Control the music you're playing (on/off/forward/back etc..)
Turn the device off.
Anything you can think of.
I realize you can do some of these things by mapping certain buttons to certain programs or by scrolling on the today screen or by trying to use the start menu, but I'm finding that you can only get so far before you're stuck and you have to use the stylus.
So is there any software of this nature? If not I might sit down and write something myself. If I do it would be cool if everyone can pitch and name things they'd like to do with one hand that they can't seem to accomplish.
Thanks!
Click to expand...
Click to collapse
HI
I use the O2 xdaI machine. I will get tmobile MDA COMPACT (= I-mate JAM) next week.
Hotbutton application is ok but the best so far for one hand operation is definitely Microsoft Voice Command ver. 1.5. It works increadibly weel on XDAI and I expect it will run even better on the JAM (I will let you know next week).
Cheers !
Heard some things about Micrsofot Voice command but I was finding it hard to believe that using voice could work well in most cases (what if it's noisy? etc...). Maybe I'll give it a try.
o2mn,
Gonna give all these suggestions a try before I think about doing something myself. The goal would be to create a program that lets you go through the menus, etc of ALL programs. Just using the buttons.
I don't know if i need to start a new topic about this but I'm trying to find out an easy way to create a launcher under a hardware button, like a bunch of people seems to wanna have.
In 'windows\appsbuttons' you can assign any hardware button to an *.exe. I want to know if there is an easy way to create a *.exe which
opens a *.link.
Something like:
IE2BUTTON.exe
» goto programfiles
»open IE2BUTTON.lnk
Hereby IE2BUTTON.lnk refers to the map IE2BUTTON where you can put every shortcut you want
Tried AEBPlus but it conflicts with application button mapping such as in TCPMP. Sometimes TCPMP gets the button press sometimes AEBPlus Plus got it - couldn't live with that so had to uninstall AEBPlus.
I use a combination of software:
PPCProfiles-Pro on the Today screen for switching phone on/off, bluetooth on/off etc via switching between profiles I've set up.
VJOKButton assigned to the memo button for closing apps, clicking OK.
MortButton for starting apps etc.
Application button mapping in TCPMP for one handed mp3 / video use.
The one thing I really want to be able to do still is alter the screen brightness one handed.
Just things I have leaned since getting and working With the spv m500
[email protected]
First of all I would like to say what a fantastic unit the SPV M500 is, totally underated by orange but I guess the hardware rather than the incarnation got the praise...
This is intended to be a very short list of things I have learned since getting it, some of them relevant some off the wall but bear with me, oh, and they are in no particular order.
MP3 playing and TT at the same time??
At first I thought this was not possible, i play mp3's all the time in the car and had used pocketmind pocketmusic which is great because it has huge buttons ideal for control while driving, using TT via BT with this app does not work on the M500, it breaks the music and the volume gets terribly out fo sync. I recently download TCPMP or BetaPlayer which i had ignired because of small controls but, after downloading i have to say it is very good, you can map the contacts and calender buttons to control playing while the player is active, ideal for the car and to my suprise after a bit of tweaking of volume controls, set TCPMP to use system volume, set TT to 1/3 and ignoring speed and you get your MP3's playing a treat with a quick break in the song for directions. Perfect..
Bigstorage
I read about this and umed and arred about it for ages, it gives you around 27mb extra working memory on the M500, before doing it i was trying to scrape together 2mb to increase performance but now i have 20mb free with all my apps installed. So, do it, it is quite simple if you follow the excellee nt guide on this board. One cautionary note though, at one point you have to copy off your phone ROM onto a spare card, the file created uses the whole of the card, this is fine but beware you have to edit the file that is created so if you have a 1gb card the file will be 1gb, make sure you have a system capable of editing a 1gb file in Hex, I had trouble with my 2 windows boxes and ended up doing it on a powerbook, just beware if you have a big card.
I just want to press a button and write the message!!
One thing that has annoyed me with PPC's is this. I wanted to have an icon on my today screen which i could click and have an open sms addressed and ready for the message, i send sms to my fiance all the time and hate having to find a message from her and click reply.
I searched and searched and in the end found it, or be it a bit backwards.
The secret is a program called Wisbar, it is not obvious when you download the trial how to do this but here it is. go into the settings and button mappings, select any button you like either a single press or hold. My choice was the start button held down, assign a program to that action, select other app. you will get a command line request, type in as if in HTML eg.
mailto:879887
879887 being the telephone number of your intended. There you go, now you just hold the stylus on start and you get an addressed sms message window appear.
MAC Users
I have had endless problems with Pocketmac (the demo) it made my mac crash and not reboot, i had to do a fresh install of OS X so beware.
browsing the web over bluetooth
If like me you have a media Centre or some other home System that is running a bluetooth Connection
If you have trouble getting It to Sync the Solutionis to go to br prefs in settings and press the button to Set up a Sync all you need to do then is pair the two arc [ it Should find it as long as you have Set up on incoming port on the host System and that porr is selected in the Connection prefs of activesync once connected and bt is working You will find that it Stays connected once for Sync is complete it is now that with the help or the fantastic opera browser that you can browse the Internet using your desktop broad band connection working over bluetooth. This is a great way to check your emails etc or write a Post as I am doing now.
--------------------
Phones:
SPV M500
SPV M2000
SPV E200
P900
K750
N7110
N3650
That's pretty comprehensive.
The SPV M500 is a good little device. I'm very pleased with mine. 8)
Very nice description: try the VJKeyPress too. It simulates every keypress that's possible, very handy for one-handed ops & not so memory consuming as WisBar.
Can't live without my magician anymore,
M
Hi all,
Just got my I-mate JAM last week ... and absolutely love it. I know the JAM isn't the latest and greatest anymore, but I wanted a small PPC phone and JAM's the perfect size. The JAMin is too expensive for me, and I also think its improvements (wifi, EDGE, WM5 to name a few) are over-rated.
I had a separate PPC (toshiba e330 ... yeah it's about time it retires) and a smartphone (MPx220) before so it's great I only get to carry 1 device instead of 2.
Anyways, got a few newbie questions I hope you guys can help me with ...
1- Storage memory??
I realize the JAM has limited memory so I've been installing as many programs as possible on the 1G SD memory card.
I still found that ~ 60% of 'storage memory' is used though, so I started moving some more programs to the memory card (and had to relink them one by one).
Afterwards I found the 'storage memory' has actually gone UP even more ... from 60% to 68%??!
What is storage memory? I thought storage memory is the stuff (program / database) stored on the RAM, so by moving some of the programs to the flash card I should see the storage memory go DOWN, not UP?!
When I run something like a 'space detective' I find that all of my big files are on the memory card anyways, so I really don't know how my storage memory got so high, and don't know how to get it back down neither.
2. Repeated resetting
Everytime I do a soft-reset, the PPC has a tendency to do repeated resetting before I finally get it back ... the first time it freaked me out. I thought it's gone into an endless loop and I'd have to do a hard-reset ... good thing I got it back after 4-5 soft-resets. Once I get it back it actually runs stable, and wouldn't reset itself.
Is that normal? Has anybody else experienced this? Usually it'd reset itself again once it gets to loading the phone alarm today plug-in, or when it connects to the phone network.
I currently have the following plugin's installed on the today screen:
-phone alarm
- ADB Weather
- Calendar
And I also run WisBar Advanced 2 ... but I have disabled WA2 to reload itself automatically on soft-resets.
I put phone alarm, ADB weather and WA2 on the main storage instead of memory, because I don't want to increase the chance of crashing.
Does anybody else has this problem? Do I have a software conflict here?
3. Photo contact?
I use photo contact that comes with the phone ... now that software is a piece of crap to begin with, keeps freezing the PPC even for the smallest thing.
And, 5 times out of 10 when someone who's been assigned a photo ID calls, the photo doesn't show up. This is despite I've put the resized photo contacts on the main memory, not the memory card.
Anybody experienced the same problem? And what's a good photo contact ID program to recommend?
4. Good dialer program?
I can also use a good replacement dialer program ... the dialer program that comes with the phone works, but it's pretty slow in suggesting contacts as I dial, and the buttons a tad small as well for 1 hand operation.
I tried D9, but for whatever reason it doesn't install for me ... plus, I also need the DTMF tones to check voicemail and what not.
5. Must have appz?
Any other must have appz you guys would highly recommend? Since getting the phone I've installed:
- phonealarm (great appz for changing profiles and displaying sms / vmail / email / missed calls)
- Wisbar Advanced 2 (great launcher)
- Cyberon BT voice dialer (not sure how it's not included with the phone)
- Resco File Explorer
- Resco Picture Viewer
- Mapopolis
- Intelligolf
- Sprite backup (works well, but extremely slow if launched from the PPC)
- eWallet
Thanks! Any comment / suggestions is appreciated!
Number16, welcome to the board.
I'm afraid I don't have time for a thorough response right now, but some thoughts:
- please read the board rules. Posting a thread with a useful topic title will get you more help, faster. It's in your interest.
- read the wiki and do search the board. The Magician is still my favourite phone, and we've all spent years posting about issues for it. It's likely most of your concerns have already been discussed.
- specifically read the wiki on favourite software. It's far from complete, but it'll point you in the right direction. Someone asks the question every 4.7 minutes, precisely, day and night, so you will find other more detailed responses elsewhere. My recommendations: get gsfinder, claunch and SmallMenuPlus NOW.
- investigate the BigStorage Rom hack. (see Wiki)
Will try to post more later if possible.
V
apart from games I'd recommend the following:
1. Eye on privacy
2. XCPU Scalar
3. SPB plus
4. HiCalc
5. Novii remote
6. imusic
I would recommend;
AE Button plus
Allows you to map up to 3 functions per button, works great on the magician
+ its free
http://www.pocketgear.com/software_detail.asp?id=20322
"Total commander" is a great free file explorer
"Mortscript" is a useful for custom tweaking
"PHM Traylaunch" put shortcuts in the System Tool Tray
Also search this forum for a sound tweak that vastly improves audio quality when listening to music via headphones
& checkout http://www.pocketpcfreewares.com/en/index.php
Thanks guys, great advices there.
Speaking of AE Button plus, I installed the (free) ver 1.0.1 but somehow it only works for the contact and schedule button. I didn't re-assign the TALK/END buttons because it says if I do I won't be able to use these buttons in the dialer.
And somehow AE Button also doesn't work for the camera and record buttons (on the side) neither ... if I re-assign some other tasks to them, they don't bring up the camera application but won't start the intended application neither. I just hear a few beeps and nothing happen.
Does the paid version of AEB Plus improve that?
Sorry if I've gone off-topic here...
number16 said:
Thanks guys, great advices there.
Speaking of AE Button plus, I installed the (free) ver 1.0.1 but somehow it only works for the contact and schedule button. I didn't re-assign the TALK/END buttons because it says if I do I won't be able to use these buttons in the dialer.
And somehow AE Button also doesn't work for the camera and record buttons (on the side) neither ... if I re-assign some other tasks to them, they don't bring up the camera application but won't start the intended application neither. I just hear a few beeps and nothing happen.
Does the paid version of AEB Plus improve that?
Sorry if I've gone off-topic here...
Click to expand...
Click to collapse
That's the same version as i'm using. Works on my contact & calender buttons & on my camera & record buttons perfectly, I use the camera button for the camera & flight mode toggle, I have mortscripts assigned to the other buttons which changes the buttons functions depending on what program is in the active window.
I find this easier to use stylus free than WM5 (I also own a Universal & a Prophet for the wife)
From your first post it sounds as your devise is a bit buggy, might be worth doing a hard reset or flashing it with a custom ROM.
A well setup Magician is an almost perfect PDA/Mobile phone balance
Have fun.
PS; Try the free trail for the paid version of AE Button & see if you like it.
Mister B said:
That's the same version as i'm using. Works on my contact & calender buttons & on my camera & record buttons perfectly, I use the camera button for the camera & flight mode toggle, I have mortscripts assigned to the other buttons which changes the buttons functions depending on what program is in the active window.
I find this easier to use stylus free than WM5 (I also own a Universal & a Prophet for the wife)
From your first post it sounds as your devise is a bit buggy, might be worth doing a hard reset or flashing it with a custom ROM.
A well setup Magician is an almost perfect PDA/Mobile phone balance
Have fun.
PS; Try the free trail for the paid version of AE Button & see if you like it.
Click to expand...
Click to collapse
i have 2.5.1 registered version i cant figure how to toggle flight mode operation..help plz and i wanna ask if we can put magician on vibrate mode with any any key ???
max414 said:
i have 2.5.1 registered version i cant figure how to toggle flight mode operation..help plz and i wanna ask if we can put magician on vibrate mode with any any key ???
Click to expand...
Click to collapse
Flight mode toggle
Download from link below then unzip & copy the program below to your phone or sd card, then create a shortcut to it in your programs folder (if you have a shortcut in your programs folder, it will show up in the menu in Buttons). Then go to "Settings>Buttons" & pick what button you want to link to the flight mode toggle program.
Vibrate mode toggle
You could create a batch file to use with Mortscript (freeware) which would turn your vibrate on & off, then link this batch file to a button.
Its quite easy to do, do a search for Mortscript. If you need help let me know & i'll write the script for you & give you what help I can in setting it up.
Mortscript is a great bit of software which can enable you to solve a few problems so its worth doing some research on it.
http://myweb.tiscali.co.uk/pdamagician/wm2003sewm5software.html
http://myweb.tiscali.co.uk/pdamagician/Downloads/tel.on-off_100.zip
Mister B said:
Flight mode toggle
Unzip & copy the program below to your phone or sd card, then create a shortcut to it in your programs folder (if you have a shortcut in your programs folder, it will show up in the menu in Buttons). Then go to "Settings>Buttons" & pick what button you want to link to the flight mode toggle program.
Vibrate mode toggle
You could create a batch file to use with Mortscript (freeware) which would turn your vibrate on & off, then link this batch file to a button.
Its quite easy to do, do a search for Mortscript. If you need help let me know & i'll write the script for you & give you what help I can in setting it up.
Mortscript is a great bit of software which can enable you to solve a few problems so its worth doing some research on it.
Click to expand...
Click to collapse
i have got mort script but it s too much for my little brain......if was hoping if u could provide the file i will assign it a button ...looking forward to your help...thx for flight mode toggle
I've got the paid version of AE Buttons Plus and it still runs a little funny sometimes ... certain buttons will work from time to time. For example, I left "single click" for Button1 untouched (which should be Calender by default) and "double click" would start Notes. Well, it starts Notes on double-click all right, but from time to times single-click wouldn't do anything. A reset usually fixes the problem, but then it'll happen again after a while.
So instead of leaving "single click" for the button un-assigned, I've assigned it to Run Appz -> Notes. That did the trick so far.
I also find that Wisbar Advanced 2 is causing quite a bit of problem ... anybody else has problem with it? With WA2, PhoneAlarm and AEButtons running at the same time, the Magician gets pretty unstable. It's a lot better if I don't load WA2.
Which is too bad, cos i've been a fan of Wisbar from long ago (well, it was a freeware then) ... anybody has any suggestion for a taskbar launcher? I really don't want something that's too busy looking, and I don't like clauncher ... I use the today screen for caleder plugin's and what not.
Thanks,
max414 said:
i have got mort script but it s too much for my little brain......if was hoping if u could provide the file i will assign it a button ...looking forward to your help...thx for flight mode toggle
Click to expand...
Click to collapse
"max414"
I've sent you a private message rather than go further off topic on this thread.
Check your private messages & get back to me.
If you guys interested have a look at the 10 Best Softwares
Comments?
Here's my 2 cents on this '10best software' list ... befoer I start I gotta say for the most part I don't agree with it, for 1 reason or another.
1. Wisbar Advanced / Desktop.
Ok, I really like Wisbar, dating back to the PPC2002 times. It was a smart little program that worked very well as a launcher and took up close to nothing in terms of memory and storage, and better, it was a freeware. The Wisbar advanced these days though, is a memory hog for what it does. It may not be a problem on somehting like a x51v, but on a device like the Magician it really isn't the best solution for launcher. Plus, I dunno if it's just me, but I ran into all kinds of software problems with Wisbar advanced 2, potentially caused by software conflict with other softwares I have. Maybe someone else have better luck with WA2 though.
2. PocketBreeze
Never really used it, but personally I'm not a fan of busy today screen ... but that's just me.
3. PocketWeather
DOn't know why I'd pay for this software when I can get ADBWeather for free.
4. PocketMusic
I used PocketMusic in the PPC2002 days, and it's not bad ... but these days when you can get GSPlayer for free, it gives PM a run for the $$.
5. RescoFileExplorer
No question about this one. Always the first program I install after a hard-reset, 'nuff said.
6. Memmaid / PocketMechanics
I use Memmaid and it's great. Never used PocketMechanics
7. QuickNotes
Never used it ... so can't really say.
8. SPB Backup
I used Sprite Backup on my old PPC so I continue to use it on the Magician. Other than being rather slow when it scans your device, I have no complaint about Sprite. I never used SPB so I can't compare.
9. Internet Browser
Haven't tried anything other than IE so can't say ...
10. Theft Alarm
Well, I use eWallet to store all the sensitive information ... never used theft alarm so can't say.
I guess that's just the list for PPC ... because for PPC phones, I'd say PhoneAlarm's one of the top 'must-get' softwares for sure.
Hi, I'm a developer wanting to write an app/today plugin. Do you have any request?
Yea I've wanted this for long time and hope you make it for me. Program that like the watch beep or vibrate 30 min or hour and not turn the screen on?? so I can tell time without pulling the phone out.
Thanks for the opportunity, I was thinking about asked here.
Today plug in for Last call and Running Program as in O2 Plus. Both are nice features of O2 Plus but sadly hacked version has lot of issues to run on wizard and it's big prog to install only for those plugins. Thanks.
check this out http://forum.xda-developers.com/showthread.php?t=328317
I'd love an app that would allow you to get notifications of email that goes into folders other than inbox. Currently, there's no way to do that, and there are no rules you can set like in desktop Outlook to inform you when a message goes into one of those folders.
Hi Kartam, I use claunch, you can see it in my avatar there, I would love to be able to finger scroll the launch icons to the left or the right to quickly get to all my apps, configurable icon size of course. Outside of the today screen a finger friendly file browser is definitely waiting for development, something that has the look and feel of pocketCM but shows your files instead of your contacts, complete with favourites and filters for stuff like music videos or documents. It should also allow users to set a default action on selecting any given item.
funger friendly alarm clock?
Hi,
how about an alarm clock with numbers like a telephone pad, so you can easily type in the wake up time (regular cell phones allow this). I tried all sorts of commercial products, they are not good (snowtime, spb time, etc...)
Or how about a modern version od "pPod"? :-D
Good luck with all your programs!!
finger friendly alarm clock?
Hi,
how about an alarm clock with numbers like a telephone pad, so you can easily type in the wake up time (regular cell phones allow this). I tried all sorts of commercial products, they are not good (snowtime, spb time, etc...)
Or how about a modern version od "pPod"? :-D
Good luck with all your programs!!
Mine's rather Simple!!!!
...or at least I think it it should be.
All I want is an app (preferably that sits on the today screen) that can toggle the network selection between automatic, roam only, and home only.
Sometimes I need to roam to hold a proper signal, and in those places I like switching my phone to "roam only". Then, when going home, I switch it back to automatic network selection. Problem is that this is buried in many menus and takes several clicks to switch. Its a pain to do this 2x a day.
what do you think?
I actually think you may be able to do that with MortScript, I could've sworn I saw a script that did something similar on HoFo or another forum with one that did almost exactly what you described, but it might've been the WiFi radio in conjunction with a GPS puck...or something
I have multiple application using GPRS. My problem is that all those application are not using tha same APN (not sure of the name, I mean different GPRS connections). Each time I need to use one application or another I need to go to the parameters, change my setting click multiple times on OK.
It would be great (at least for me) to have an application on the today screen which permit to select the correct APN.
Regards
Stephane
cybersush said:
Hi,
Or how about a modern version od "pPod"? :-D
Click to expand...
Click to collapse
What a great age we live in when a completely touch screen digital music player is not considered as modern!
Haha, you got a point there, touché :-D
What i meant was a more modern pPod skin (maybe more skins to choose from...?), a playlist manager of some sort (so you dont have to browse through all kins of folders until you find your mp3s), slightly bigger buttons, ....
I love the design and the simplicity of the pPod though, just a little tweaking would be cool. And yes, i did also try mortplayer and HTC audiomanager, both great programs, but both programs are too big for just playing music (in my opinion)
Actually a great program would just be a hack to have HTC Audio Manager use the ID3 Number tags to sort music instead of Alphabetical
Re the new ppod program - that'd be great - I've been refreshing the iphone media player thread like nothing on earth - cant wait to see what that turns out like... the HTC hack would be good tho.
ps you might want to check out Simple Tunes V1.61
Hi!
You can make a little program for me??
Here you can find a little CAB http://forum.xda-developers.com/attachment.php?attachmentid=49265&d=1188921933
They copy to the Windows folder a little executable, copy into StartUp folder a shortcut to it, and add few registry-entries....
Well, this program don't have any interface, simple start when device start...
The target is "improove" the quality of A2DP transmission (audio over bluetooth)
BUT, when this service running, the battery quickll drain!!
You can make a simple app (like a GUI) to enable/disable it??
To enable = write few registry-entries and copy a shortcut to the StartUp folder, then softreset the device
To disable = remove the same registry-entries and remove the shortcut from the StartUp folder, then softreset the device
Can you create an application that will let my Hermes roam the floor vacuuming!?
a2dp stereo auto enable
can you write (or is there out there) an app which enables the a2dp pairing with a bt headset so the stereo is enabled by default when the headset re-establishes a connection.
currently (for me) if i turn loose the pairing, ie if I charge the headset, then turn the headset back on for a2dp. I have to run the bt settings in control panel and click 'set as wireless stereo' on the headset.
note the phone headset is enabled straight away when it is powered up.
thanks
left/right scrolling today screen plugin
this would be a sweet today plugin....
Location based profile changer
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
Do not launch two or more instances of the program at the same time, could really mess things up. -- se the forum (thanks tucahara)
To stop the program, u must use a process manager.
it would be good if someone could make a cab to install it. -- done see the forum (thanks tucahara)
this is still a beta, I intend to make ajustments as people give feedback.
Thanks,
hope u like.
-----first update---
now, an file called "audioswitch_error.txt" in the root directory will hold the error messages.
------------ List - Working ------------
wizard - I tested
P3301 or P3300 - I tested
att tilt - I tested
touch 3452 and 3450
touch dual
touch cruise
touch HD
Sony Ericsson Xperia X1
BenQ E72
Titan --> see the forum
------------ List - NOT working ------------
T-Mobile Diamond
HTC Touch by Sprint
Samsung SGH-i780
------------------------------------------------------------------------------------
check the new thread at:
http://forum.xda-developers.com/showthread.php?t=502361
new aproach to do the switch and now open source, even with an class that others can improve and put in other apps...
Some people complain about me not openning the source of the app, I have just made this way because there was proprietary code inside and I had no time to rewrite it without the proprietary code.
I have made the best I could, and now I had some time and rewrite the app in open source, to those who only complain about it, get the code and make it better instead of complaining!
Thanks for all that encourage me to continue the work and helped the development.
will retire this project for while...
thanks u all.
Audioswitch for Skype
On HTC Touch by Sprint (CDMA, also known as Vogue), audioswitch does switch the audio in the Skype 2.5 windows mobile PPC from external speaker to handset. Unfortunately, the microphone is then also disabled. I hope you'll be able to tweak your audioswitch to resolve this.
Thank you so much for developing this wonderful applet. I'm sure you will have the gratitude of many frustrated Skype windows mobile users.
What really happens is that when the sound output is switched in some phones, the microphone gain changes too. This happens because the phone thinks it is a "normal call".
Most of the times the mic gain increases, but in your phone it must be decreasing. Try to figure out in registry where the mic gain controls are recorded and chage all of then to the same value. I had this issue with my P3301 and solved this way, but there is quite a time now and I do not remenber where are the reg keys to change, but I have found the information here in the forum.
I will try to figure out for other "hack" to solve this issue... thanks for reply.
doesn't work at T-Mobile Compact IV (aka Diamond)
Sound went to loudspeaker....
PS: fring last version working fine with sound at mine phone (without any additional programms). Sound is going to correct destination automatically
I just tried the latest version of Fring, which automatically switches audio to earpiece when call is connected.
The same issue occurs with the new Fring as I described above with your audioswitch program: I can hear audio through earpiece, but microphone doesn't work (or is inaudible).
I couldn't find a tweak or registry hack to correct this. Any help would be greatly appreciated.
MarceloFB said:
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
it would be good if someone could make a cab to install it.
this is still a beta, I intend to make ajustments as people give feedback.
If someone like this program and wants to make an donation...
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=4WLQVA6LTKWSL&lc=GB&item_name=marcelofb&item_number=marcelofbxdadonations¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG_global%2egif%3aNonHosted
Thanks,
hope u like.
Click to expand...
Click to collapse
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
OOOH
If this program works on the new BenQ E72 I'm getting in a couple of days I'll certainly donate!
THANKYOUTHANKYOUTHANKYOU
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
baal_zebub said:
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
Click to expand...
Click to collapse
hehhehe, I made troca2, I will see if the switch code is the same or if I have made some mistake...
are u sure you have put the program in the correct directory?? I will make some modifications to have an error feedback. So u can see if something is wrong...
JKingDev said:
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
Click to expand...
Click to collapse
It is a good idea to use hook, I have not think of it!
I use a proprietary code included in a lib at the company I work for to make the "switch" but it is not different of what u find here in the forum.
Maybe we can make an effort to re-make it with hooks...
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
so to sum up the way i have it now (most files included) on my xperia x1:
1) installed skype
2) installed mortscript
3) add skypesoundswitch to \windows\....
3) add skype.mscr to \.... (root)
4) overwrite skype.lnk with the new skype.lnk in \windows\start menu\programs\..
in the way whenever i open skype(.lnk), it opens skype.mscr, this opens skypesoundswitch.exe and than skype.exe... when you close skype.exe it closes skypesoundswitch.exe...
it seems to work perfect.. but hey maybe i am doing something totally wrong here.. than just shout!
by the way, the .mscr and the .lnk files are offcourse edit-able .. so you can put the files everywhere you like..
madhijs said:
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
Click to expand...
Click to collapse
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you will have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch. Or please show me where to find details on how to code this myself. Thanks!
Hat off to both of you and really glad that we will have a much improved solution.
JKingDev said:
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch.
Click to expand...
Click to collapse
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
madhijs said:
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
Click to expand...
Click to collapse
Yes it must be run at startup but placing a link in your startup folder will make everything transparent to the user. I don't think there will be an effect at startup. In it's current form it must check every second (or whatever you set the timeout to), but its only a little bit of code. I am not really sure if that will really have an effect. The more often it checks the faster it will switch when you open skype, but also the more processor use. Check less often and it uses less processor, but there might be a delay in switching the audio. I proposed doing it by hooks though because this would use even less processor. The app will only check when a new window takes focus, rather than just periodically checking. This way it only checks when it needs to and will always switch instantly.
I am glad u liked the program.
I will try to answer most of the questions...
1- JKingDev:
I have though in your idea of using hooks, but if I use a hook, the program will have a loop anyway to check for the messages(hidden loop ;-) ), and it would have to have an "fake window" or something to process the messages. This way we have only one loop, in a very simple command line program with high optimization, so we have to think what is really the best way of doing it... I will pm u as soon I have any time to "program" again. hehe
2- people that uses mortscript with the old "troca2"
I will try to make a way to make this program work the same way as troca2, maybe with an "argc argv", wait the next update.
3- the battery life??
if u notice any battery life decreasing with the usage of the program, configure a bigger delay, maybe 5000ms, it is a matter of adjust the "timming" for each processor. Post your results here so others can find the optimum value for the delay in their phones.
4- have to start the program every reset?
yes, just put it in the startup folder.
maybe someone can make an cab that put the program in the right place and a link in the startup, it would be cool! I dont have an easy program to deal with cabs, and the vs projects for cabs.... I really cant make that thing work!!
well it is only the batterylife i was worried about. but i'll try running the phone this weekend with the program running and doing some skype.. lets see how it turns out!
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
weekendli said:
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
Click to expand...
Click to collapse
will check this, but people reported that worked in xperia... and it is running in my P3301... anyway, will check and post an wm6 build if it is the case... check the error file and see if it tells anything.
Other thing, this program uses low level api`s, so your windows MUST be fully unlocked for it to work in wm6.