5.5v charger with XDA II? - MDA II, XDA II, 2060 General

I got a 5.5v/1A USB travel charger but the XDA I/II use 5v chargers. Anybody know whether I would damage the battery with that extra .5v?

Related

My XDA won't charge

There have been quite a few postings here on people having problems charging their XDA with thrird-party chargers originally built for the XDA I.
Add me to the list I"m on the road and can't get the damned thing charged using the charger.
However the good news is, that the problem is not the cable (or the connector for that matter). Right now I'm in the internet cafe using the USB-connection to charge the XDA II at least a little. THis is working!!
My third-partz charger is a power supply with a USB-socket, that connects with this charge-sync cable. But, its not working! This leaves two possibilities:
1) The power supply is providing a lower voltage than the XDA II requires (something less than 5.0 Volts, mazbe 4.7?). I can't check this here, but if someone with a similar problem could measure his charger voltage using a multimeter, we might find an answer. Pins to check on this site under "connector".
If this is the cause, it won't help me here, but at least we'll have the problem solved.
2) I noticed in my charger, that the USB/pins 2 and 3 ( Data-H and Data-L) are unconnected. Potentially the XDA II has an issue if these lines are floating whilst power is applied to the USB-bus. I don't know if we can check this easilz,bu if someone has an Idea?
Greetings from the Maldives 8) Sun, warm, great, but no power for my XDA!!!
mobile charger
I'm using a nokia charger, and the supplied adapter and it seesm to work fine.
MDA/XDA II Pinout - Charge Issue Resolved!!
Being back from my vacation, I immediately got into figuring out why my third party charger was not working, though the MDA II would charge through the same cable when connected to the USB-bus of a PC.
It was a wiring error in the USB-cable after all!
To figure it out I took that little adapter that comes with the original charger apart. Though the MDA/XDA II has the same pinout as the MDA/XDA I, there is a major difference in that not all GND pins are connected together inside. In order to charge, at least one of Pins 16,17,18 must be connected to ground. The grounds on pins 2 and 5 are not connected to the internal charge circuit. TO make things worse, the MDA/XDA detects an external charge power source when pin 2 is GND and Pin 22 is +5V - so the light goes on, but it still does not charge.
On my cable the USB-shield was connected to pin 18. When connected to a PC, the shield was connected at that end to Ground and all went well. On my charger supply, the shield was not connected, so it couldn't charge.
I just rewired the connector and see there it works!
So, if you have the same problem, and are handy at the soldering iron, there is a solution! For those making/selling those USB charge/sync cables, get it right the first time!
Is it safe using a Nokia Charger ?
My Nokia travel charger is rated at 6.2 V, not 5.0 as the one supplied with the XDA II
Regards
Michael
Yeah! But watch out anyway because the volatge is not the only thing to check before charging a device. The right voltage but a bad amperage can cause lots of damage...
Using the Brando USB charger woukd actually DRAIN the battery when the bar reaches yellow....
Using a Nokia charger
The Nokia is rated at 6.2 V 720 mA, the original charger is 5V 1 A.
If I understand my physics right, the XDA may draw more current that the charger can handle, so AMP vise, the danger is on the charger ?
Not that I belive that the XDA would really pull 1A, but you never know.
It would be really nice to have just one charger in the travel bag..
Regards
Michael
Suggest a USB Charger and source.
Can anyone suggest a usb charger cable and source in the UK for an O2 XDA 2 as the one that I have currently does not charge at all despite the light saying so.
xda ll charger
hi
you may get a car charger from http://www.expansys.com/product.asp?code=108736
i have had one on order for 2 weeks now may get it in the end :lol:
Re: Suggest a USB Charger and source.
bloodwynd said:
Can anyone suggest a usb charger cable and source in the UK for an O2 XDA 2 as the one that I have currently does not charge at all despite the light saying so.
Click to expand...
Click to collapse
This was the effect I had. Its a mistake in the wiring on your cable.
Thanks,
What I am really after is to find out if there is a place to find a USB cable that will work right out of the box/dodgy package that it comes in. I am not good with soldering irons or electronics and would like to buy one that is wired up correctly to charge my XDA II.
Cheers.

Compatible chargers

Anyone else have any experiences they'd like to share using non-OEM chargers?
I use my HP TouchPad charger in my living room, as my HP Touchstone plugs into it usually. It charges the N7 at exactly the same rate as the OEM charger.
Just curious about others' experiences.
Oh....and is anyone else w/the HP TouchPad just completely spoiled regarding tablet prices? $250 seemed like a lot of money to pay, LOL.
http://saraoutlet.com/yxt-023-us-2-...for-apple-ipad-iphone-4g-3gs-white-35561.html
I use this, it charges my iphone, ipad, ipod touch, samsung, and now my nexus. I have one for the car as well that is 1A/2.1A.
the blackberry playbook 1.8a charger works really well. indistinguishable from the supplied OEM. available for $16 bucks or so in retail packaging.
I've used the same charger for my Galaxy SII. Seemed to do the job well and just as quickly!
I have a few blackberry chargers one is a playbook one and some other android chargers.. they all work just fine.
I'd love to know if there are any portable chargers that will charge the Nexus 7 without being plugged into the wall, so, I can charge it when I'm laying in bed or something, I have portable USB chargers that I don't thing would work with the 7 The Duracell Powerhouse USB charger and the Sony Media CP-ELS USB Portable Charger with 2,000 mAh Li-Ion Battery, I use them interchangeably with my iPhone 4S and Playstation Vita.
Okay, I went through my "wall wart" drawer and tried 8 chargers and 9 cables. I can't find any pattern to the results
There was one cable (skinny black generic USB) that didn't work with charger, and one charger (from a Kingston Wi-Drive) that wouldn't work with any cable.
The best cable was a white mini-usb (that I used with a mini-micro dongle) that had come with my generic 5000 mAH backup battery; it worked with *everything* except the Wi-Drive charger. The best chargers were the OEM ASUS charger, and a generic small black cube (1A) labelled "KIN"; those worked with every cable except the skinny black dud.
The worst of the working chargers were an "Innergie" dual laptop/USB power supply, and the generic battery backup. Those only worked with that white cable.
Honorable mentions go to an old Motorola RAZR charger (used with a mini-micro dongle) and a small Samsung phone charger. Those have permanent cables, and both worked.
I couldn't pick up any pattern in terms of amp rating (obviously, the lower amp chargers will take longer). It seems to be "luck of the draw".
I've tried probably 4-5 different chargers including a Motorola wall charger plugged in the wall, and also plugged into a power inverter in my truck, a motorola car charger and an oem wall charger and have no issues with any of them.
iPad 3 charger compatibility
Can anyone confirm if N7 charges using the new iPad 10W charger? Mine only supports the charger that came with it. Does that mean that the usb port is broken and I need to replace it or is it the way all the units behave?
Other XDA threads with similar topic:
http://forum.xda-developers.com/showthread.php?t=1780211
http://forum.xda-developers.com/showthread.php?t=1781680
http://forum.xda-developers.com/showthread.php?t=1784322
dmalovic said:
Can anyone confirm if N7 charges using the new iPad 10W charger? Mine only supports the charger that came with it. Does that mean that the usb port is broken and I need to replace it or is it the way all the units behave?
Click to expand...
Click to collapse
It charges using my iPad2 charger, which I think is the same charger as the new iPad?
The Nexus 7 does not show charging when plugged into any of my OEM/aftermarket Apple chargers.
It does not appear to matter whether I use the USB cable supplied by Asus, or a standard commodity micro USB cable.
There is evidence from other users that the tablet may be charging at the 1A rate even though the charge indicator stays off.
I have not personally confirmed this yet.
Im using the charger of my BlackBerry playbook! 5volts 2amp!
From 0% to 100% in less than 3 hours!
Sent from my Nexus 7
I bought 10 of the HP Touchpad chargers for $5 shipped a few weeks ago. They work perfect for the Nexus 7, same plug, 2AH charging..
I think you can still find them for $5 shipped @ hp.com
All my micro USB chargers work , from Nokia to BlackBerry to HTC all fab all charge the n7 OK
Sent from my Nexus 7 using xda premium
martyg7 said:
The Nexus 7 does not show charging when plugged into any of my OEM/aftermarket Apple chargers.
It does not appear to matter whether I use the USB cable supplied by Asus, or a standard commodity micro USB cable.
There is evidence from other users that the tablet may be charging at the 1A rate even though the charge indicator stays off.
I have not personally confirmed this yet.
Click to expand...
Click to collapse
I've had one of those OEM/aftermarket Apple charges blow up on me (not shrapnel, it stayed in the plastic casing), so I wouldn't expect much from those anyway. Have you tried with any standard micro USB phone charger?
Chargers that work:
- Motorola Droid Pro (hard-wired micro USB). Rated at 800 mA but seems to charge almost as fast as the OEM.
- Kin One (Uses any USB cable). Rated at 1A, works with every USB cable I have (almost; there were a couple that didn't work with anything). These are available on-line for less than 10 bucks:
http://www.amazon.com/Sharp-Standard-Wall-Charger-CNR1002/dp/B005IY428Y
http://www.aftermarketcellular.com/ic/CNR1002.html
This is nice and compact; I'm going to order a couple of more to have as spares.
- Motoroloa RAZR (hard-wired mini-USB, used with mini-to-micro adapter). Rated at 500 mA. Works, but probably pretty slow.
- Samsung (from unknown phone; hard-wired micro-USB) rated at 750 mA. Didn't test charge time.
As an aside, I have a 5000 mAh backup battery that I've used with phones and my Nook color (http://www.amazon.com/5000mAh-External-Motorola-Blackberry-Nintendo/dp/B004P8E612). It works with the Nexus, but ONLY with the mini-USB cable that the Power Bank shipped with. Every other cable I've tried chokes. It's intended for an iPhone and puts 6.5V across the power pins (with no load; this is about the same as the Kin) and pulls the data pins to 3.4V. What's weird is that I can connect a 2-conductor (charge only) extension in series with the working cable, so that the data signal never reaches the Nexus. If I use a 2-conductor cable by itself, the Nexus doesn't charge.
tjupille said:
Chargers that work:
Click to expand...
Click to collapse
When you say they work, are they showing as AC charging when you use them or are they just charging.
Go-to battery stats and it will say either
Charging (USB)
Or
Charging (AC)
Sent from my Nexus 7
Compatable car charger
It's really disappointing to know N7 is so picky about chargers. Can anyone report on a working small/short car USB charger that is compatible?
You might want to check that your vehicle can provide 2amps from its cigarette lighter plug. Normal only utility plugs can do that.
Sent from my Nexus 7

[Q] Charging - UK wall

I have a few questions I hope you can answer please. I don't have a Nexus 10 yet, but hope to buy one this weekend.
I understand the supplied usb cable and wall charger are not that great (slow charging?), what are you thoughts on this?
If there is an issue with the charging, is it the cable or the plug or both?
How long is the supplied USB data/charge cable?
Has anyone purchased an alternate cable or plug charger that performs better, or does anyone have any experience with the pogo magnetic charger, (I'm guessing users of this still use the supplied plug)
The cable and charger are fine. Just leave it charging over night because it can take some time to charge from 0-100%.
My cable length is about 1.5m
If you want a faster charge buy a pogo pin charger.
Sent from my Nexus 10 using xda app-developers app

Slow charging unless using OEM cable

Whats the deal here? Anyone find any other cables that work? If I use a monoprice premium cable with a 1 amp car charger with bluetooth and music going it won't charge. But if I use the same car charger and use the OEM LG cord that came with the phone the phone charges fine. Same thing in the house plugged in with the stock charger base. Its super slow unless you use the OEM cable.
There is a HUGE thread about this.
I think we've narrowed it down to the AWG thickness of the cable. The Stock Cable is really thick and able to carry the voltage properly. Using another cable with thinner wires, it can't provide enough juice.
But there is a huge thread on this already.
http://forum.xda-developers.com/showthread.php?t=2460881
GTvert90 said:
f I use a monoprice premium cable with a 1 amp car charger with bluetooth and music going it won't charge.
Click to expand...
Click to collapse
The new chargers are 1.8A vs the old 1A charger. Less amperage = Less power, that is why it is slow charging. The width of a cable can limit the amount of amperage passed, so for 1A you can expect a thinner cable.

Charging issue please help

Can someone tell me why my phone will charge with the car charger but not with the wall charger? they look about the same as far as wattage? I have a lg v20. Specs: car charger output: DC 5v, total 2.1A max. Wall charger: 5v 2.0a. What's makes the difference in 2.1 vs 2.0? I know the wall charger is not out of the box but i needed something for the office so i used the wall charger i found around the house.
Davidespinosa72 said:
Can someone tell me why my phone will charge with the car charger but not with the wall charger? they look about the same as far as wattage? I have a lg v20. Specs: car charger output: DC 5v, total 2.1A max. Wall charger: 5v 2.0a. What's makes the difference in 2.1 vs 2.0? I know the wall charger is not out of the box but i needed something for the office so i used the wall charger i found around the house.
Click to expand...
Click to collapse
Either try a different cable out a different charger. That's about it.
Sent from my LG-H918 using Tapatalk

Categories

Resources