I have tried all the WM Eng ROMs in my Qtek1010 none of them seems to be stable on my device.When I press Power button to switch on it make SOFT RESET.Still could not find the solution to this,so I need to roll back to my Qtek 1010 ROM.
Can I Install the official ROM back agian?
Which method is safe SD card Flashing or Active Sync?
I also need the Official Boot Screen
I did not have backup of Qtek 1010 2002 ROM
Please help
Re: Need Qtek1010 Official ROM 2002 Rolling back from WM 200
mushtash said:
I have tried all the WM Eng ROMs in my Qtek1010 none of them seems to be stable on my device.
Click to expand...
Click to collapse
Did you try cooking your ROM using Lumpistefan Kitchen? http://lumpistefan.dyndns.org/
Still could not find the solution to this,so I need to roll back to my Qtek 1010 ROM.
Click to expand...
Click to collapse
Did you try hard reseting your XDA? Would it help ?
Which method is safe SD card Flashing or Active Sync?
Click to expand...
Click to collapse
I have found that SD flashing using an external SD card reader worked 100 %
I also need the Official Boot Screen
I did not have backup of Qtek 1010 2002 ROM
Click to expand...
Click to collapse
Cook from Lumpystefan kitchen it has it all.http://lumpistefan.dyndns.org/
Thanks Tanguy for reply.Yes I have cooked almost all Eng WM 2003 ROMs from Lumi Stefan kitchen.After Doing upgrade I did hard reset.But still the same.
Is it my power button gives problem or the OS.I never had problem OS 2002.
Now i have tried O2 4.01.12 Eng ROM same Problem.
try this site
check this site:
http://www.yorch.net/upgrades.htm
Qtek1010 ROM with Boot screen
Can anyone help me to locate Qtek 1010 2002 ROm with Qtek boot screen.In rom kitckens there are all for O2.i only need to replace my cooked boot screen of O2 need to change this.
Re: Qtek1010 ROM with Boot screen
mushtash said:
Can anyone help me to locate Qtek 1010 2002 ROm with Qtek boot screen.In rom kitckens there are all for O2.i only need to replace my cooked boot screen of O2 need to change this.
Click to expand...
Click to collapse
Added Qtek Bootimage of the 3.16.13 Rom to the kitchen.....
(this rom was already in the kitchen.....)
Added the bootimage to download. You can change it manualy at xour device, using the
pnewbmp
Click to expand...
Click to collapse
command from the is utils http://xda-developers.com/~itsme/download/itsutils.zip
HTH
Stefan
How to use Bootimage file and itsutils.zip file.I have downloaded both now how do i change boot screen of Qtek 1010 to official boot screen
Thanks
mushtash said:
How to use Bootimage file and itsutils.zip file.I have downloaded both now how do i change boot screen of Qtek 1010 to official boot screen
Click to expand...
Click to collapse
Have you ever tried the search button?
Take a look at http://forum.xda-developers.com/viewtopic.php?t=8017&highlight=pnewbmp and / or http://forum.xda-developers.com/viewtopic.php?t=6679&highlight=pnewbmp
Stefan
This is the original rom for Qtek 1010 with Pocket PC 2002
Try this!
http://www.qtek.nu/files/qtek316.zip
This is the original rom for Qtek 1010 with Pocket PC 2002, but with a newer ROM version.
Otherwise : www.qtek.nu (Homesite of Qtek in Swedish)
Olli Power 8)
Original Qtek 1010 2002 ROM (3.18.04)
I have the English 3.18.04 ROM from Qtek if you don't find a solution let me know & I'll upload it for you.
confused about rom versions. Is 4.01.16 newer than 4.00.21 ?
also, t-mobile told me it was the 2003 upgrade with this rom RUUv2.07_CEv4.01.16
that is causing my sd card to get erased and that there was nothing I could do and that I couldnt even go back to 2002. Are they jacking with me or what?
I see this site : http://www.yorch.net/upgrades.htm has rom version
Pocket PC 2002 RUU 3.14.40
and Im wondering if this will put me back to 2002 without the sd problem.
You can roll back to the 2002 ROM. I've done it successfully with my SD.
Thanks, ill give it a shot.
mushtash,
did you manage to fix your soft reset problem with a software upgrade. i posted a while back about this and i was told it was a hardware issue. i tried several roms from the kitchen. the 309 siemens one *seems* to make it do less soft resets
Related
Hi- i have tried to contact my local dealer in Denmark, but nobody seems to know whether there will be an upgrade or not. Any clues ?????
You don't have to wait since you can use O2's WM2003 rom.
Sounds good, but what happens with my qtek ??What about the radio upgrade, and can i go back to the previus version ???
Your qtek's rom will simply overwrited by O2's rom. It just like install a difference version of Windows to your computer (May be it's not a good example...). Except the boot up screen, there is no major different.
I think you should upgrade your qtek's radio to Qtek 3.23 or O2 4.21, because these two version were reported working great on the WM2003 rom.
You can go back to the previous version, but you should have a 64m+ SD Card and a XDArit compatible SD Reader (most stand-alone SD reader should work), because the windows flashing utility (program a) is not working under WM2003, you must use a SD card to downgrade the rom.
Hi,
Any links to get the Qtek Radio [email protected]?
Thanks
Ravi Radh
raviradh said:
Hi,
Any links to get the Qtek Radio [email protected]?
Thanks
Ravi Radh
Click to expand...
Click to collapse
ftp.zensay.com
user:qtek
pass:qtek
It's under the rsu directory.
Do not use Passive Transfers.
I have sucessfuly Upgraded my Qtek 1010 with WM 2003 4.01.16 by Bootloader method Thanks to Biso007 for his help.But now when Qtek turns off after 3mins It does not switch on even after pressing Power Button i tied several times.Now i have to do Reset Everytime or uncheck the box for turning off the device.
Whats wrong what to do I miss calls now.
Can i reinstall the same ROM or any other?
Please help me to slove this issue
Thanks
using the sd upgrade mode you can upgrade downgrade sidegrade to what ever rom you want older newer or the same .......
I still recommend using 4.01.00 ROM
thanks Biso007.I want to that ROM 4.01.00 eng beta can be installed.I could not find without beta.I want install that ROM kitchn its beta.Pls help
i got mine from tmobile and pulled out the nbf file
if the latest from tmobile have a later rom then 4.01 then i used the beta
it was a nice rom
Sloved the Problem!!!
Guys!!
Dont ever add KSE True Fax while cooking ROM 4.01.16.KSE Truefax will make your device sleep and make lifetime Resoft to wake-up.
Greets.
I have copied the ROM of a 1010 from a buddy that is protected with a key - presumably the key is cooked into the ROM using a unique device identifier. I've used Jeff's toolset to copy the ROM and create an SD image which i then loaded onto my Qtek.
The thing hangs on the boot screen now and won't go any further.
Any suggestions as to how to get around this?
woodae said:
Greets.
I have copied the ROM of a 1010 from a buddy that is protected with a key - presumably the key is cooked into the ROM using a unique device identifier. I've used Jeff's toolset to copy the ROM and create an SD image which i then loaded onto my Qtek.
The thing hangs on the boot screen now and won't go any further.
Any suggestions as to how to get around this?
Click to expand...
Click to collapse
This may be a problem of the Romspace used for this ROM. It uses also a "free region" that was used before for the permanent save.
The unique device identifier is also a problem. Until now i do not know how this key is build and where it have been integrated in the ROM......
As much as i know it's just udeless this ROM...
HTH
Stefan
Thanks for the reply
Its a pity!
Do you know where i can get an alternative WM2003SE ROM for the 1010?
woodae said:
Thanks for the reply
Its a pity!
Do you know where i can get an alternative WM2003SE ROM for the 1010?
Click to expand...
Click to collapse
No. not until now..... :-(
Stefan
Q TEK 1010
Hi Stefan,
Kindly help me to restore my radio version on qtek 1010, I live in kuwait. I upgraded it alongwith sf56 wm 2003, and it does not work here. Thanks
i have upgraded my XDA with WM2003 to WM2003SE with the .EXE ROM i've got from LumpiStefan. And there are so many trouble on it. My device goes slow and often hang so I need to soft reset it many times. When I've got new message (SMS) , It doesn't appear in the screen if I turn off the screen. So , just the sound. The signal is poor. There is no wireless modem and photo contact anymore like in WM2003. What can I do with this ?? Can I go back to 4.01.12 ENG ROM (WM2003) ? How ?? Can I just run the .EXE file again ?? Which WM2003's ROM best ?? 4.01.12 ENG or 4.01.12 o2 EURO ??
irsan_donald said:
i have upgraded my XDA with WM2003 to WM2003SE with the .EXE ROM i've got from LumpiStefan. And there are so many trouble on it. My device goes slow and often hang so I need to soft reset it many times. When I've got new message (SMS) , It doesn't appear in the screen if I turn off the screen. So , just the sound. The signal is poor. There is no wireless modem and photo contact anymore like in WM2003. What can I do with this ?? Can I go back to 4.01.12 ENG ROM (WM2003) ? How ?? Can I just run the .EXE file again ?? Which WM2003's ROM best ?? 4.01.12 ENG or 4.01.12 o2 EURO ??
Click to expand...
Click to collapse
I think the WM2003SE was and is still a beta version for the Wallaby devices.
I never said, that the ROM is working perfectly.
Signal strengness should be the same as in all other versions, cause the radio stack has not changed....
You should be able to flash any other ROM via EXE-File to your device. I would suggest to make a hard reset before flashing.
In my opinion the best WM2003 ROm in English is the 4.01.12....
HTH
Stefan
LumpiStefan said:
irsan_donald said:
i have upgraded my XDA with WM2003 to WM2003SE with the .EXE ROM i've got from LumpiStefan. And there are so many trouble on it. My device goes slow and often hang so I need to soft reset it many times. When I've got new message (SMS) , It doesn't appear in the screen if I turn off the screen. So , just the sound. The signal is poor. There is no wireless modem and photo contact anymore like in WM2003. What can I do with this ?? Can I go back to 4.01.12 ENG ROM (WM2003) ? How ?? Can I just run the .EXE file again ?? Which WM2003's ROM best ?? 4.01.12 ENG or 4.01.12 o2 EURO ??
Click to expand...
Click to collapse
I think the WM2003SE was and is still a beta version for the Wallaby devices.
I never said, that the ROM is working perfectly.
Signal strengness should be the same as in all other versions, cause the radio stack has not changed....
You should be able to flash any other ROM via EXE-File to your device. I would suggest to make a hard reset before flashing.
In my opinion the best WM2003 ROm in English is the 4.01.12....
HTH
Stefan
Click to expand...
Click to collapse
So it means I can go back to WM2003 ? Or is that any change if I upgrade the radio stack to 4.21 ? mine is 4.16 where can I get wireless modem application for my device ?
i have the following rom as in my profile, however must i upgrade my rom ?
or is there a better rom then mine..................?
http://wiki.xda-developers.com/index.php?pagename=HTC_Alpine_ShippedOrg
how do i download the roms if some cannot be opened
problem
i tried to install one but hanged during the installation .............
now i have no radio or no gsm .............therefore no telephone
how can i get back the radio?
There is an alpine radio ROM that you can download from
ftp://xda:[email protected]/Alpine/Extracted Rom/radio_.nbf
But if you tried burning a Himalaya ROM to your Alpine, you probably messed up your operating system and should flash your good old ROM back as well. There is no WM5 or WM6 for Alpine.
i manged to run alpine_Noid as usual and everything returned to normal ..........
thanks for your advices
help , how i can change softwere ,i have wm2003 sc to wm5
rosollini said:
help , how i can change softwere ,i have wm2003 sc to wm5
Click to expand...
Click to collapse
Nothing to Qtek 2020i???